Cationic dye adsorption by acrylamide/itaconic acid hydrogels in aqueous solutions

Acrylamide/itaconic acid (AAm/IA) hydrogels containing different quantities of itaconic acid have been irradiated with γ radiation. The hydrogels were used in an experiment concerning the adsorption of cationic dyes such as Basic Blue 9, Basic Violet 1 and Basic Blue 12. In the experiments of the adsorption of dyes from their synthetic aqueous solutions, type S adsorption isotherms were found. One mole of monomeric unit of AAm/IA hydrogels adsorbed 78.5–513.1 μmole of Basic Blue 9, 60.2–641.1 μmole of Basic Violet 1 and, 28.8–593.3 μmole of Basic Blue 12, while acrylamide hydrogel did not adsorb any cationic dye. As a result, it was shown that the AAm/IA hydrogels could be used as an adsorbent for water pollutants such as dyes, and immobilization of these organic contaminants in the hydrogels from waste water can solve one of the most important environmental problems of the textile industry. © 1997 John Wiley & Sons, Ltd.     

Synthesis and characterisation of magnetic activated carbon/diopside nanocomposite for removal of reactive dyes from aqueous solutions: experimental design and optimisation

In this work, a series of magnetic activated carbon/nanodiopside (Fe₃O₄/AC/Diop) nanocomposites were synthesised and used for the removal of reactive green KE-4BD dye from the aqueous solution. After preparation of nanodiopside by sol-gel method and activated carbon from coconut husk, first, Fe₃O₄/AC composite was prepared by in situ synthesis of Fe₃O₄ nanoparticles between activated carbon pores, and then, different percentages of Fe₃O₄/AC/Diop nanocomposites were prepared by simple mixing of Fe₃O₄/AC composite and Diop in ethanol. Formation of Fe₃O₄/AC and Fe₃O₄/AC/Diop composites was characterised by FTIR, field emission scanning electron microscopy, BET, XRD and vibrating sample magnetometer analyses. Thermogravimetric analysis was used to show the adsorption capacity of the adsorbent more accurately. Effects of amount of adsorbent, initial pH, contact time and dye concentration on reactive green dye removal were also studied using central composite design. Optimal conditions for maximum reactive green KE-4BD dye adsorption (98.35%) process were as follows: pH= 4.90, adsorbent amount: 0.015 g, dye concentration: 37.17 mg/L and contact time: 10.12 min, respectively. In addition, the adsorption kinetics, thermodynamics and isotherms were examined. Adsorption isotherms (q_max: 344.827 mg/g), kinetics and thermodynamics were demonstrated that the sorption processes were better described by the pseudo-second-order equation and the Langmuir equation.     

Synthesis of poly (acrylamide-co-aconitic acid) adsorbents by gamma-irradiation,characterization, adsorption studies and application for cationic dyes removal

In this study, acrylamide (AAm)/aconitic acid (ACA) copolymers were prepared with two different mol% of aconitic acid 4%, 17% and were irradiated with gamma irradiation at different irradiation doses (4 - 25kGy). The percent yield was assigned by gravimetrical method. The effect of irradiation dose, pH and involved amounts of monomers (AAm/ACA) in hydrogels on swelling properties were investigated. The conversion of monomers to hydrogels was 100% at 25kGy. Poly(acrylamide-co-aconitic acid) P(AAm/ACA) hydrogels have been used for the adsorption of some aqueous solutions of dyes such as Methylene Blue (MB) and Safranine-O (S). The hydrogels were swollen in distilled water at pH 3, 5, 7, 8 and in aqueous solutions of dyes. The initial swelling rates of hydrogels are increased by increasing of pH. The effects of concentration of the aqueous solutions of dye and hydrogel composition on the adsorption were investigated. The adsorption is increased and changed depending on the structure of dye and composition of hydrogel.     

Dye removal by a novel hydrogel‐clay nanocomposite with enhanced swelling properties

Acrylamide (AAm)‐2‐acrylamide‐2‐methylpropanesulfonic acid sodium salt (AMPSNa) hydrogel and AAm‐AMPSNa/clay hydrogel nanocomposite having 10 w% clay was prepared by in situ copolymerization in aqueous solution in the presence of a crosslinking agent (N,N′‐methylenebisacrylamide (NMBA)). Swelling properties and kinetics of the hydrogel samples were investigated in water and aqueous solutions of the Safranine‐T (ST) and Brilliant Cresyl Blue (BCB) dyes. The swelling and diffusion parameters were also calculated in water and dye solutions. It was observed that the AAm‐AMPSNa/clay hydrogel nanocomposite exhibits improved swelling capacity compared with the AAm‐AMPSNa hydrogel. It was also found that the diffusion mechanisms show non‐Fickian character. Adsorption properties of the hydrogel samples in the aqueous solution of ST and BCB dyes were also investigated. Clay incorporation into the hydrogel structure increased not only the adsorption capacity but also the adsorption rate. Adsorption capacity values of the hydrogel nanocomposite were found to be 484.2 and 494.2 mg g^?1 for the ST and BCB dyes, respectively. It was seen that the adsorption of dyes by the hydrogel nanocomposite completed in 10 min while the AAm‐AMPSNa hydrogel adsorbed dyes approximately in 90 min. Adsorption data of the samples were modelled by the pseudo‐first‐order and pseudo‐second‐order kinetic equations in order to investigate dye adsorption mechanism. It was found that the adsorption kinetics of hydrogel nanocomposite followed a pseudo‐second‐order model. Equilibrium isotherms were analyzed using the Langmuir and Freundlich isotherms. It was seen that the Langmuir model fits the adsorption data better than the Freundlich model. Copyright © 2008 John Wiley & Sons, Ltd.     

Methylene blue removal from aqueous solution by magnetic clinoptilolite/chitosan/EDTA nanocomposite

In this study, clinoptilolite as a natural zeolite which was magnetized using precipitation of maghemite nanoparticles was coated by chitosan and then modified by thylenediamine tetra-acetic acid to add functional groups and its performance in the removal of toxic methylene blue from aqueous solution was investigated. Synthesized magnetic nanocomposite was characterized by VSM, XRD, SEM, and FTIR analyses. The saturation magnetization of the final nanocomposite was obtained as 22.2 emu/g. In addition, the factors affecting adsorption process and its optimization were investigated using response surface methodology and central composite design. Data obtained by different isotherm, adsorption kinetic and thermodynamic models were also studied. The results showed good agreement of these data with the Freundlich isotherm model (R ² = 0.99), and it was found that adsorption follows the second-order kinetics model (R ² = 1). Negative values of ΔG and positive values of ΔH obtained from this adsorption thermodynamic study revealed that the methylene blue adsorption process is exothermic and spontaneous. The optimum conditions to ensure maximum adsorption efficiency were determined, and included pH = 5.54, adsorbent amount of 0.03 g, temperature of 31.18 °C, and initial solution concentration of 16.21 mg/l which resulted in a removal efficiency of 99.44%. The results indicated that this nanocomposite can be used as a proper adsorbent for adsorbing methylene blue and other dye contaminants.     

Localized hydrogels based on cellulose nanofibers and wood pulp for rapid removal of methylene blue

Access to clean water has become increasingly difficult, motivating the need for materials that can efficiently remove pollutants. Hydrogels have been explored for remediation, but they often require long times to reach high levels of adsorption. To overcome this limitation, we developed a rapid, locally formed hydrogel that adsorbs dye during gelation. These hydrogels are derived from cellulose—a renewable, nontoxic, and biodegradable resource. More specifically, we found that sulfated cellulose nanofibers or sulfated wood pulps, when mixed with a water-soluble, cationic cellulose derivative, efficiently remove methylene blue (a cationic dye) within seconds. The maximum adsorption capacity was found to be 340 ± 40 mg methylene blue/g cellulose. As such, these localized hydrogels (and structural analogues) may be useful for remediating other pollutants.     

Adsorption kinetics and thermodynamics of acid dyes on a carboxymethylated chitosan-conjugated magnetic nano-adsorbent

The monodisperse chitosan-conjugated Fe(3)O(4) nanoparticles with a mean diameter of 13.5 nm were fabricated by the carboxymethylation of chitosan and its covalent binding onto Fe(3)O(4) nanoparticles via carbodiimide activation. The carboxymethylated chitosan (CMCH)-conjugated Fe(3)O(4) nanoparticles with about 4.92 wt.-% of CMCH had an isoelectric point of 5.95 and were shown to be quite efficient as anionic magnetic nano-adsorbent for the removal of acid dyes. Both the adsorption capacities of crocein orange G (AO12) and acid green 25 (AG25), as the model compounds, decreased with increasing pH, and the decreasing effect was more significant for AO12. On the contrary, the increase in the ionic strength decreased the adsorption capacity of AG25 but did not affect, obviously, the adsorption capacity of AO12. By the addition of NaCl and NaOH, both AO12 and AG25 could desorb and their different desorption behavior could be attributed to the combined effect of pH and ionic strength. From the adsorption kinetics and thermodynamics studies, it was found that both the adsorption processes of AO12 and AG25 obeyed the pseudo-second-order kinetic model, Langmuir isotherm, and might be surface reaction-controlled. Furthermore, the time required to reach the equilibrium for each one was significantly shorter than those using the micro-sized adsorbents due to the large available surface area. Also, based on the weight of chitosan, the maximum adsorption capacities were 1 883 and 1 471 mg x g(-1) for AO12 and AG25, respectively, much higher than the reported data. Thus, the anionic magnetic nano-adsorbent could not only be magnetically manipulated but also possessed the advantages of fast adsorption rate and high adsorption capacity. This could be useful in the fields of separation and magnetic carriers. [formula in text].     

Aminothiozolyl maleamic acid based multi chelating hydrogels for the separation of uranium (VI) ions from aqueous environment

Multi chelating hydrogels (MCHs) were synthesized using a simple radical polymerization method from acrylamide, hydroxyethyl acrylate, and N‐(2‐aminothiozolyl)maleamic acid (AMA) monomers, methylenebisacrylamide (MBA) a cross‐linker, and azobisisobutyronitrile (AIBN) an initiator. The resulting MCHs were characterized with Fourier transform infrared spectroscopy and scanning electron microscopy to confirm the formation and morphological properties. The MCHs were highly swellable in aqueous solutions as well as different pH conditions. MCHs were applied to evaluate uptake behavior of Uranium (VI) ion from aqueous solutions. Batch adsorption studies were performed by varying experimental conditions like contact time, pH, and initial metal ion concentration. The kinetics data was best suited with the second‐order equation model. The equilibrium adsorption data was correlated with Langmuir and Freundlich isotherm models. This study suggests that maximum Uranium (VI) ion uptake has been found to be 288 mg.g^?1 and regenerated for 5 cycles without any significant change. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and application of treated activated carbon for cationic dye removal from modelled aqueous solution

Use of activated carbon (AC) prepared from rice husk and treated with anionic surfactant is investigated to eliminate cationic dye crystal violet (CV) using modelled dye solution. AC modified with anionic surfactant sodium lauryl sulfate (ACSLS) and other two surfactant namely sodium dodecyl sulfonate and hexadecyl trimethyl ammonium bromide were used for the analysis. Optimum ACSLS was analyzed and characterized using BET, XRD, SEM accompanied with XEDS, FTIR, HR-TEM and zeta potential, which confirms the sorption of CV onto ACSLS. Influence of pH, dose of adsorbent, concentration of initial dye, contact time, additive salts as well as actual water samples were investigated. Presence of NH⁴⁺, Ca²⁺, Mg²⁺, Na²⁺, Ca²⁺ and K⁺ cations in dye solution were having negligible (less than 4 %) influence on dye removal capacity. Study of mass transfer parameters revealed intra particle diffusion and film diffusion both played their part, whereas other kinetic studies has shown that experimental data fitted best with Pseudo 2nd order rate. Isotherm studies accompanied with error analysis revealed that Langmuir isotherm controls the adsorption equilibrium with highest capacity of CV adsorption with optimum operating conditions as pH = 6, temperature = 318 K, adsorbent dose = 100 mg/L and dye concentration = 30–60 mg/L. Study of thermodynamics and temperature analysis have shown that the sorption reaction was favourable and spontaneous with rise in temperature and endothermic in nature. Column studies are reported for varying rate of flow, depth of bed and dye concentrations along with analysis of column experimental data with various models like Yoon-Nelson, Thomas, Bohart-Adam and Clark model. Reusability (no. of cycles) of used adsorbent was studied using regeneration experiments. Analysis inferred that AC modified using surfactants can be a useful technique for enhanced adsorption capacity of dyes from aqueous solution and not much work has been reported on use of anionic surfactant modified AC for dye removal process.     

Succinic acid functionalized magnetic mesoporous silica for the magnetic assisted separation of uranium from aqueous solution

Journal of Radioanalytical and Nuclear Chemistry - The magnetite embedded mesoporous silica was prepared and functionalized with succinic acid, (abbreviated as Fe-MCM-SUC) for targeted adsorption...     

苯胺在碳纳米管上的吸附特征

苯胺是一种重要的有机化工原料,能通过皮肤和呼吸道进入人体而引起中毒,还会严重污染环境。目前,国内外处理含苯胺废水的方法主要有氧化法、萃取法、生化法、吸附法等。本文使用碳纳米管进行液相吸附除去苯胺。     

Amin-functionalized magnetic-silica core-shell nanoparticles for removal of Hg2+ from aqueous solution

Magnetic nanoparticles with monodisperse shape and size were prepared by a simple method and covered by silica. The prepared core-shell Fe₃O₄@silica nanoparticles were functionalized by amino groups and characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Brunauer-Emmett-Teller (BET) and Fourier transform infrared spectroscopy (FT-IR) techniques. The synthesized nanoparticles were employed as an adsorbent for removal of Hg²⁺ from aqueous solutions, and the adsorption phenomena were studied from both equilibrium and kinetic point of views. The adsorption equilibriums were analyzed using different isotherm models and correlation coefficients were determined for each isotherm. The experimental data were fitted to the Langmuir–Freundlich isotherm better than other isotherms. The adsorption kinetics was tested for the pseudo-first-order, pseudo-second-order and Elovich kinetic models at different initial concentrations of the adsorbate. The pseudo-second-order kinetic model describes the kinetics of the adsorption process for amino functionalized adsorbents. The maximum adsorption occurred at pH 5.7 and the adsorption capacity for Fe₃O₄@silica-NH₂ toward Hg²⁺ was as high as 126.7 mg/g which was near four times more than unmodified silica adsorbent.     

Interaction between anionic and cationic gemini surfactants at air/water interface and in aqueous bulk solution

The mixture of the anionic O,O′-bis(sodium 2-lauricate)-p-benzenediol (C₁₁pPHCNa) and cationic (oligoona)alkanediyl-α, ω-bis(dimethyldodecylammonium bromide) (C₁₂-2-E_x-C₁₂·2Br) gemini surfactants has been investigated by surface tension and pyrene fluorescence. The results show that the surface tension γ drops faster with total surfactant concentration C_T for α₁ = 0.1 or 0.3 than for α₁ = 0.7 or 0.9, where α₁ is the mole fraction of C₁₁pPHCNa in the bulk solution on a surfactant-only basis. The fast drop in γ for α₁ < 0.5 indicates strong adsorption at the air/water interface owing to the interaction between oppositely charged components, resulting in the formation of the adsorption double layers in the subsurface. The slow descent in γ for α₁ > 0.5 is attributed to the pre-aggregation in the solution before the critical micelle concentration cmc. A possible mechanism is proposed.     

Interaction of bacterial acidic polysaccharide with cationic dyes

The interaction of acidic capsular polysaccharide isolated fromKlebsiella K26 with cationic dyes pinacyanol chloride, acridine orange and phenosafranin has been studied by spectral measurements. The polymer induces metachromasy in pinacyanol chloride dye, indicating a blue shift in the visibly absorption spectrum of the dye from 600 to 500 nm. The stoichiometry of polymer/dye in the metachromatic compound, thermodynamic parameters of interaction, and effects of different cosolvents on the stability of the complex have been studied. Spectrophotometric and spectrofluorometric properties of the interaction between the polymer and all three dyes are presented. The chromotropic property of the polymer has been established.     

Preparation and characterization of magnetic chitosan nanocomposites for removal of Cu2+ from aqueous solution

In this article, highly efficient magnetic chitosan nanoparticles were prepared by the glutaraldehyde cross-linking method and then chemically-modified with amino groups through reaction between triethylenetramine and glycidyl methacrylate. The adsorption kinetics and isotherms of these novel adsorbents fit the pseudo-second-order model and the Langmuir model. The maximum adsorption capacities were 293?mg/g at pH?=?4.3 and t?=?1.4 hours. The rate-limiting step was the chemical adsorption. Further recycling experiments showed that the adsorbent provided the potential regeneration and reuse after adsorbing Cu²⁺. All the experimental results demonstrated that the adsorbent had a potential application in Cu²⁺ removal from wastewater.     

Adsorption removal of methyl violet from aqueous solution by chromium phosphovanadate

An effective adsorbent for methyl violet (MV), chromium phosphovanadate (named as Cr‐PV) nanomaterials, was prepared by a simple coprecipitation strategy. The microstructure and morphology of as‐synthesized Cr‐PV were characterized by SEM, X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR), respectively, which was confirmed as nanosheet shapes. The adsorption behavior for MV from aqueous solutions was systematically investigated. The kinetic and equilibrium results indicate that the adsorption process follows pseudo‐second‐order kinetic model and Langmuir isotherm, respectively. Compared with PV and commercially available activated carbon, Cr‐PV has preferable adsorption property to MV. The maximum adsorption capacity can reach 123.81 mg g^?1 at room temperature. The thermodynamic parameters such as Gibbs free energy (ΔG^ο), enthalpy (ΔH^ο), and entropy change (ΔS^ο) show that the adsorption of MV is an endothermic and spontaneous process. Moreover, the adsorptive behavior between Cr‐PV and MV is monolayer adsorption and electrostatic interaction mechanism. Cr‐PV, as a promising adsorbent with high adsorption capacity and fast adsorption rate, shows great potential for the removal of MV from wastewater.     

Removal of cationic dyes by poly(acrylamide-co-acrylic acid) hydrogels in aqueous solutions

Poly(acrylamide-co-acrylic acid (poly(AAm-co-AAc)) hydrogels prepared by irradiating with γ-radiation were used in experiments on swelling, diffusion, and uptake of some cationic dyes such as Safranine-O (SO) and Magenta (M). Poly(AAm-co-AAc) hydrogels irradiated at 8.0 kGy have been used for swelling and diffusion studies in water and cationic dye solutions. The maximum swellings in water, and SO, and M solutions observed are 2700%, 3500%, and 4000%, respectively. Diffusions of water and cationic dyes within hydrogels have been found to be non-Fickian in character. Adsorption of the cationic dyes onto poly(AAm-co-AAc) hydrogels is studied by the batch adsorption technique. The adsorption type was found Langmuir type in the Giles classification system. The moles of adsorbed dye for SO and M per repeating unit in hydrogel (binding ratio, r) have been calculated as 3834×10⁻⁶ and 1323×10⁻⁶, respectively. These results show that poly(AAm-co-AAc) hydrogels can be used as adsorbent for water pollutants such as cationic dyes.     

磁性金属有机骨架-聚多巴胺的制备并用于水产养殖水样中阳离子染料的萃取检测

利用多巴胺(DA)中的儿茶酚基团能与金属有机骨架晶体(MOFs)中金属离子螯合的原理,以ZIF-67为模板,经DA蚀刻-自聚合形成具有孔洞结构的聚多巴胺(PDA)壳层,制备了磁性-MOFs-PDA(Fe₃O₄@Z67D)新型材料。多种表征手段验证了材料的形貌、结构和性能。新型材料具有亲水性的表面、纳米级的孔径,以及良好的磁响应,被用作磁固相萃取吸附剂。结合高效液相色谱分析手段,建立了萃取检测亚甲蓝(MB)和结晶紫(CV)两种阳离子染料的新方法。在最优的萃取和色谱分析条件下,MB和CV的线性范围分别为0.5～200μg/L和0.01～50μg/L,检出限分别为0.04μg/L和0.008μg/L,对两种染料的富集因子分别为777和688。新型材料重复使用10次,其萃取性能未见发生变化。该方法成功应用于检测淡水鱼养殖用水中痕量的MB和CV,加标回收率为82.0%～109.0%, RSD低于2.9%。     

Preparation of magnetic molecularly imprinted polymer nanoparticles by surface imprinting by a sol–gel process for the selective and rapid removal of di‐(2‐ethylhexyl) phthalate from aqueous solution

Magnetic molecularly imprinted polymer nanoparticles for di‐(2‐ethylhexyl) phthalate were synthesized by surface imprinting technology with a sol–gel process and used for the selective and rapid adsorption and removal of di‐(2‐ethylhexyl) phthalate from aqueous solution. The prepared magnetic molecularly imprinted polymer nanoparticles were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and vibrating sample magnetometry. The adsorption of di‐(2‐ethylhexyl) phthalate onto the magnetic molecularly imprinted polymer was spontaneous and endothermic. The adsorption equilibrium was achieved within 1 h, the maximum adsorption capacity was 30.7 mg/g, and the adsorption process could be well described by Langmuir isotherm model and pseudo‐second‐order kinetic model. The magnetic molecularly imprinted polymer displayed a good adsorption selectivity for di‐(2‐ethylhexyl) phthalate with respect to dibutyl phthalate and di‐n‐octyl phthalate. The reusability of magnetic molecularly imprinted polymer was demonstrated for at least eight repeated cycles without significant loss in adsorption capacity. The adsorption efficiencies of the magnetic molecularly imprinted polymer toward di‐(2‐ethylhexyl) phthalate in real water samples were in the range of 98–100%. These results indicated that the prepared adsorbent could be used as an efficient and cost‐effective material for the removal of di‐(2‐ethylhexyl) phthalate from environmental water samples.     

温敏水凝胶溶胀行为及其分离性能

以甲基丙烯酸钠(SM)为单体与异丙基丙烯酰胺(NPA)共聚,N,N-亚甲基双丙烯酰胺(MBA)为交联剂,得到阴离子型温敏水凝胶;对其热敏性能、溶胀性能及它对甘草酸的分离性能进行了研究,并通过凝胶中水的状态理论对结果进行了分析和解释,还研究了阴离子浓度的变化对上述性能的影响。将其用于甘草酸粗品的分离吸收,探讨它用于分离中草药有效成分的可能性。