Ruthenium‐catalyzed fast living radical polymerization of methyl methacrylate: The R?Cl/Ru(Ind)Cl(PPh3)2/n‐Bu2NH initiating system

A fast living radical polymerization of methyl methacrylate (MMA) proceeded with the (MMA)₂? Cl/Ru(Ind)Cl(PPh₃)₂ initiating system in the presence of n‐Bu₂NH as an additive [where (MMA)₂? Cl is dimethyl 2‐chloro‐2,4,4‐trimethyl glutarate]. The polymerization reached 94% conversion in 5 h to give polymers with controlled number‐average molecular weights (M_n's) in direct proportion to the monomer conversion and narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) ≤ 1.2]. A poly(methyl methacrylate) with a high molecular weight (M_n ～ 10⁵) and narrow MWD (M_w/M_n ≤ 1.2) was obtained with the system within 10 h. A similarly fast but slightly slower living radical polymerization was possible with n‐Bu₃N, whereas n‐BuNH₂ resulted in a very fast (93% conversion in 2.5 h) and uncontrolled polymerization. These added amines increased the catalytic activity through some interaction such as coordination to the ruthenium center. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 617–623, 2002; DOI 10.1002/pola.10148     

Organometallic Lewis Acids,Part LXII. Chiral Carbonyl‐Cyclopentadienyl‐Triphenylphosphine‐Iron and ‐Ruthenium Complexes with Tertiary Nitriles [CpM(CO)(PPh3)(N≡C–CR1R2R3)]+ BF4– (M = Fe,Ru)

A series of tertiary nitriles was synthesized by alkylation of acetonitrile, primary and secondary nitriles, using alkylbromides and sodium amide in liquid ammonia. By reaction of the in situ formed organometallic Lewis acids [CpM(CO)(PPh₃)]⁺ (M = Fe, Ru) with the novel tertiary nitriles, the complexes [CpM(CO)(PPh₃)(N≡C–CR¹R²R³]BF₄ were obtained. A di‐iron complex was formed with 1,6‐dicyanohexane.     

Cyclopentadienyl Dicarbonyl Iron‐Bismuth Compounds – Synthesis,Structure, and Reactivity

Abstract. The cyclopentadienyl‐substituted iron‐bismuth complexes [{Cp(CO)₂Fe}BiCl₂] ( 1 ), [{Cp(CO)₂Fe}BiBr₂] ( 2 ), [{Cp′′(CO)₂Fe}BiBr₂] ( 3 ) and [{Cp*(CO)₂Fe}BiBr₂] ( 4 ) were prepared with high yields starting from [Cp^x(CO)₂Fe]₂ [Cp^x = C₅H₅ (Cp), C₅H₃‐1, 3‐tBu₂ (Cp′′), C₅Me₅ (Cp*)] and the corresponding bismuth halides. The single crystal X‐ray structure analyses of compounds 2 – 4 are reported. Comparison of their solubility demonstrates that the steric hindrance in this type of compounds is only slightly higher for compound 3 compared with compound 2 but significantly lower compared with the Cp* derivative 4 . Compounds 1 – 4 react with nucleophililic reagents such as KOtBu, NaOCH₂CH₂OCH₃, and NaOSiMe₃ as well as with water in the presence of an amine to give a mixture of [{Cp^x(CO)₂Fe}BiX] (X = Cl, Br) and [{Cp^x(CO)₂Fe}₃Bi]. In case of a reaction with nBu₄NCl and DMAP (dimethylaminopyridine) no such dismutation is observed. Instead the complexes [{Cp(CO)₂Fe}BiBr₂(DMAP)₂] ( 5 ), [NnBu₄]₂[{{Cp(CO)₂Fe}BiBr₃}₂] ( 6 ) and [NnBu₄]₂[{{Cp(CO)₂Fe}BiCl₃}₂] ( 7 ) were isolated and characterized by single‐crystal X‐ray diffraction.     

Simultaneous control of the stereospecificity and molecular weight in the ruthenium‐catalyzed living radical polymerization of methyl and 2‐hydroxyethyl methacrylates and sequential synthesis of stereoblock polymers

The stereospecific living radical polymerizations of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) were achieved with a combination of ruthenium‐catalyzed living radical and solvent‐mediated stereospecific radical polymerizations. Among a series of ruthenium complexes [RuCl₂(PPh₃)₃, Ru(Ind)Cl(PPh₃)₂, and RuCp*Cl(PPh₃)₂], Cp*–ruthenium afforded poly(methyl methacrylate) with highly controlled molecular weights [weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.08] and high syndiotacticity (r = 88%) in a fluoroalcohol such as (CF₃)₂C(Ph)OH at 0 °C. On the other hand, a hydroxy‐functionalized monomer, HEMA, was polymerized with RuCp*Cl(PPh₃)₂ in N,N‐dimethylformamide and N,N‐dimethylacetamide (DMA) to give syndiotactic polymers (r = 87–88%) with controlled molecular weights (M_w/M_n = 1.12–1.16). This was the first example of the syndiospecific living radical polymerization of HEMA. A fluoroalcohol [(CF₃)₂C(Ph)OH], which induced the syndiospecific radical polymerization of MMA, reduced the syndiospecificity in the HEMA polymerization to result in more or less atactic polymers (mm/mr/rr = 7.2/40.9/51.9%) with controlled molecular weights in the presence of RuCp*Cl(PPh₃)₂ at 80 °C. A successive living radical polymerization of HEMA in two solvents, first DMA followed by (CF₃)₂C(Ph)OH, resulted in stereoblock poly(2‐hydroxyethyl methacrylate) with syndiotactic–atactic segments. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3609–3615, 2006     

Highly Strained Heterometallacycles of Group 4 Metallocenes with Bis(diphenylphosphino)amide Ligands

A study regarding coordination chemistry of the bis(diphenylphosphino)amide ligand Ph₂P‐N‐PPh₂ at Group 4 metallocenes is presented herein. Coordination of N,N‐bis(diphenylphosphino)amine ( 1 ) to [(Cp₂TiCl)₂] (Cp=η⁵‐cyclopentadienyl) generated [Cp₂Ti(Cl)P(Ph₂)N(H)PPh₂] ( 2 ). The heterometallacyclic complex [Cp₂Ti(κ²‐P,P‐Ph₂P‐N‐PPh₂)] ( 3 Ti ) can be prepared by reaction of 2 with n‐butyllithium as well as from the reaction of the known titanocene–alkyne complex [Cp₂Ti(η²‐Me₃SiC₂SiMe₃)] with the amine 1 . Reactions of the lithium amide [(thf)₃Li{N(PPh₂)₂}] with [Cp₂MCl₂] (M=Zr, Hf) yielded the corresponding zirconocene and hafnocene complexes [Cp₂M(Cl){κ²‐N,P‐N(PPh₂)₂}] ( 4 Zr and 4 Hf ). Reduction of 4 Zr with magnesium gave the highly strained heterometallacycle [Cp₂Zr(κ²‐P,P‐Ph₂P‐N‐PPh₂)] ( 3 Zr ). Complexes 2 , 3 Ti , 4 Hf , and 3 Zr were characterized by X‐ray crystallography. The structures and bondings of all complexes were investigated by DFT calculations.     

Phosphine (oxide)‐(thio) phenolate palladium complexes: Synthesis,characterization and (co)polymerization of norbornene

A series of palladium complexes ( 2a–2g ) ( 2a : [6‐^tBu‐2‐PPh₂‐C₆H₃O]PdMe(Py); 2b : [6‐C₆F₅–2‐PPh₂‐C₆H₃O]PdMe(Py); 2c : [6‐^tBu‐2‐PPh^tBu‐C₆H₃O]PdMe(Py); 2d : [2‐PPh^tBu‐C₆H₄O] PdMe(Py); 2e : [6‐SiMe₃–2‐PPh₂‐C₆H₃O]PdMe(Py); 2f : [2‐^tBu‐6‐(Ph₂P=O)‐C₆H₃O]PdMe(Py); 2g : [6‐SiMe₃–2‐(Ph₂P=O)‐C₆H₃S]PdMe(Py)) bearing phosphine (oxide)‐(thio) phenolate ligand have been efficiently synthesized and characterized. The solid‐state structures of complexes 2d , 2f and 2g have been further confirmed by single‐crystal X‐ray diffraction, which revealed a square‐planar geometry of palladium center. In the presence of B(C₆F₅)₃, these complexes can be used as catalysts to polymerize norbornene (NB) with relatively high yields, producing vinyl‐addition polymers. Interestingly, 2a /B(C₆F₅)₃ system catalyzed the polymerization of NB in living polymerization manner at high temperature (polydispersity index 1.07, M_n up to 1.5 × 10⁴). The co‐polymerization of NB and polar monomers was also studied using catalysts 2a and 2f . All the obtained co‐polymers could dissolve in common solvent.     

Iron‐catalyzed living radical polymerization of acrylates: Iodide‐based initiating systems and block and random copolymerizations

A half‐metallocene iron iodide complex [Fe(Cp)I(CO)₂] induced living radical polymerization of methyl acrylate (MA) in conjunction with an iodide initiator [(CH₃)₂C(CO₂Et)I, 1 ] and Al(Oi‐Pr)₃ to give polymers of controlled molecular weights and narrow molecular weight distributions (MWDs) (M_w/M_n < 1.2). With the use of chloride and bromide initiators, the MWDs were broader, whereas the molecular weights were similarly controlled. Other acrylates such as n‐butyl acrylate (nBA) and tert‐butyl acrylate (tBA) can be polymerized with 1 /Fe(Cp)I(CO)₂ in the presence of Ti(Oi‐Pr)₄ and Al(Oi‐Pr)₃, respectively, to give living polymers. The 1 /Fe(Cp)I(CO)₂ initiating system is applicable for the synthesis of block and random copolymers of acrylates (MA, nBA, and tBA) and styrene of controlled molecular weights and narrow MWDs (M_w/M_n = 1.2–1.3). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2033–2043, 2002     

Stereospecific styrene polymerization and ethylene–styrene copolymerization with titanocenes containing a pendant amine donor

A series of monocyclopentadienyl titanium complexes containing a pendant amine donor on a Cp group ( A = CpTiCl₃, B = Cp^NTiCl₃, C = Cp^NTiCl₂TEMPO, for Cp = C₅H₅, Cp^N = C₅H₄CH₂CH₂N(CH₃)₂, and TEMPO = 2,2,6,6‐tetramethylpiperidine‐N‐oxyl) are investigated for styrene homopolymerization and ethylene–styrene (ES) copolymerization. When activated by methylaluminoxane at 70 °C, complexes with the amine group ( B and C ) are active for styrene homopolymerization and afford syndiotactic polystyrene (sPS). The copolymerizations of ethylene and styrene with B and C yield high‐molecular weight ES copolymer, whereas complex A yields mixtures of sPS and polyethylene, revealing the critical role that the pendant amine has on the polymerization behavior of the complexes. Fractionation, NMR, and DSC analyses of the ES copolymers generated from B and C suggest that they contain sPS. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1579–1585, 2010     

Reaction of Cp2ZrCl2 with Inorganic Amides

The reactions of [η⁵‐Cp₂ZrCl₂] (Cp = η⁵‐C₅H₅) with [K(THF)_n][N(PPh₂)₂] (n = 1.25—1.5) and K[CH(PPh₂NSiMe₃)₂] are reported. The first reaction led to the monoamido complex [η⁵‐Cp₂Zr(Cl)N(PPh₂)₂] in which the {(Ph₂P)₂N}^— ligand — via a phosphorous and the nitrogen atom — is coordinated to the zirconium atom in a chelating (η²) fashion. Reaction of the potassium methanide compound, K{CH(PPh₂NSiMe₃)₂} with zirconocene dichloride yield the carbene‐like mono cyclopentadienyl complex [η⁵‐CpZr(Cl){C(PPh₂NSiMe₃)₂}]. The complex is formed by a salt metathesis and concomitant a cyclopentadiene extrusion.     

2‐[(Diphenylphosphino)methyl]pyridine as ligand for iron‐based atom transfer radical polymerization

2‐[(Diphenylphosphino)methyl]pyridine (DPPMP) was successfully used as a bidentate ligand in the iron‐mediated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) with various initiators and solvents. The effect of the catalytic system on ATRP was studied systematically. Most of the polymerizations with DPPMP ligand were well controlled with a linear increase in the number‐average molecular weights (M_n) versus conversion and relatively low molecular weight distributions (M_w/M_n = 1.10–1.3) being observed throughout the reactions, and the measured molecular weights matched the predicted values. Initially added iron(III) bromide improved the controllability of the polymerization reactions in terms of molecular weight control. The ratio of ligand to metal influenced the controllability of ATRP system, and the optimum ratio was found to be 2:1. It was shown that ATRP of MMA with FeX₂/DPPMP catalytic system (X = Cl, Br) initiated by 2‐bromopropionitrile (BPN) was controlled more effectively in toluene than in polar solvents. The rate of polymerization increased with increasing the polymerization temperature and the apparent activation energy was calculated to be 56.7 KJ mol^?1. In addition, reverse ATRP of MMA was able to be successfully carried out using AIBN in toluene at 80 °C. Polymerization of styrene (St) was found to be controlled well by using the PEBr/FeBr₂/DPPMP system in DMF at 110 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2922–2935, 2008     

Structures and Properties of Spherical 90‐Vertex Fullerene‐Like Nanoballs

By applying the proper stoichiometry of 1:2 to [Cp^RFe(η⁵‐P₅)] and CuX (X=Cl, Br) and dilution conditions in mixtures of CH₃CN and solvents like CH₂Cl₂, 1,2‐Cl₂C₆H₄, toluene, and THF, nine spherical giant molecules having the simplified general formula [Cp^RFe(η⁵‐P₅)]@[{Cp^RFe(η⁵‐P₅)}₁₂{CuX}₂₅(CH₃CN)₁₀] (Cp^R=η⁵‐C₅Me₅ (Cp*); η⁵‐C₅Me₄Et (Cp^Et); X=Cl, Br) have been synthesized and structurally characterized. The products consist of 90‐vertex frameworks consisting of non‐carbon atoms and forming fullerene‐like structural motifs. Besides the mostly neutral products, some charged derivatives have been isolated. These spherical giant molecules show an outer diameter of 2.24 (X=Cl) to 2.26 nm (X=Br) and have inner cavities of 1.28 (X=Cl) and 1.20 nm (X=Br) in size. In most instances the inner voids of these nanoballs encapsulate one molecule of [Cp*Fe(η⁵‐P₅)], which reveals preferred orientations of π–π stacking between the cyclo‐P₅ rings of the guest and those of the host molecules. Moreover, π–π and σ–π interactions are also found in the packing motifs of the balls in the crystal lattice. Electrochemical investigations of these soluble molecules reveal one irreversible multi‐electron oxidation at E_p=0.615 V and two reduction steps (?1.10 and ?2.0 V), the first of which corresponds to about 12 electrons. Density functional calculations reveal that during oxidation and reduction the electrons are withdrawn or added to the surface of the spherical nanomolecules, and no Cu²⁺ species are involved.     

Silylium dual catalysis in living polymerization of methacrylates via In situ hydrosilylation of monomer

Silylium ions (“R₃Si⁺”) are found to catalyze both 1,4‐hydrosilylation of methyl methacrylate (MMA) with R₃SiH to generate the silyl ketene acetal initiator in situ and subsequent living polymerization of MMA. The living characteristics of the MMA polymerization initiated by R₃SiH (Et₃SiH or Me₂PhSiH) and catalyzed by [Et₃Si(L)]⁺[B(C₆F₅)₄]^– (L = toluene), which have been revealed by four sets of experiments, enabled the synthesis of the polymers with well‐controlled M_n values (identical or nearly identical to the calculated ones), narrow molecular weight distributions (? = 1.05–1.09), and well defined chain structures {H? [MMA]_n? H}. The polymerization is highly efficient too, with quantitative or near quantitative initiation efficiencies (I* = 96–100%). Monitoring of the reaction of MMA + Me₂PhSiH + [Et₃Si(L)]⁺[B(C₆F₅)₄]^– (0.5 mol%) by ¹H NMR provided clear evidence for in situ generation of the corresponding SKA, Me₂C?C(OMe)OSiMe₂Ph, via the proposed “Et₃Si^+”‐catalyzed 1,4‐hydrosilylation of monomer through “frustrated Lewis pair” type activation of the hydrosilane in the form of the isolable silylium‐silane complex, [Et₃Si? H? SiR₃]⁺[B(C₆F₅)₄]^–. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1895–1903     

Highly Strained Heterometallacycles of Group 4 Metallocenes with Bis(diphenylphosphino)methanide Ligands

A study of the coordination chemistry of different bis(diphenylphosphino)methanide ligands [Ph₂PC(X)PPh₂] (X=H, SiMe₃) with Group 4 metallocenes is presented. The paramagnetic complexes [Cp₂Ti{κ²‐P,P‐Ph₂PC(X)PPh₂}] (X=H ( 3 a ), X=SiMe₃ ( 3 b )) have been prepared by the reactions of [(Cp₂TiCl)₂] with [Li{C(X)PPh₂}₂(thf)₃]. Complex 3 b could also be synthesized by reaction of the known titanocene alkyne complex [Cp₂Ti(η²‐Me₃SiC₂SiMe₃)] with Ph₂PC(H)(SiMe₃)PPh₂ ( 2 b ). The heterometallacyclic complex [Cp₂Zr(H){κ²‐P,P‐Ph₂PC(H)PPh₂}] ( 4 aH ) has been prepared by reaction of the Schwartz reagent with [Li{C(H)PPh₂}₂(thf)₃]. Reactions of [Cp₂HfCl₂] with [Li{C(X)PPh₂}₂(thf)₃] gave the highly strained corresponding metallacycles [Cp₂M(Cl){κ²‐P,P‐Ph₂PC(X)PPh₂}] ( 5 aCl and 5 bCl ) in very good yields. Complexes 3 a , 4 aH , and 5 aCl have been characterized by X‐ray crystallography. Complex 3 a has also been characterized by EPR spectroscopy. The structure and bonding of the complexes has been investigated by DFT analysis. Reactions of complexes 4 aH , 5 aCl , and 5 bCl did not give the corresponding more unsaturated heterometallacyclobuta‐2,3‐dienes.     

Synthesis and Characterization of Multiferrocenyl‐Substituted Group 4 Metallocene Complexes

The reaction of different metallocene fragments [Cp₂M] (Cp=η⁵‐cyclopentadienyl, M=Ti, Zr) with diferrocenylacetylene and 1,4‐diferrocenylbuta‐1,3‐diyne is described. The titanocene complexes form the highly strained three‐ and five‐membered ring systems [Cp₂Ti(η²‐FcC₂Fc)] ( 1 ) and [Cp₂Ti(η⁴‐FcC₄Fc)] ( 2 ) (Fc=[Fe(η⁵‐C₅H₄)(η⁵‐C₅H₅)]) by addition of the appropriate alkyne or diyne to Cp₂Ti. Zirconocene precursors react with diferrocenyl‐ and ferrocenylphenylacetylene under C? C bond coupling to yield the metallacyclopentadienes [Cp₂Zr(C₄Fc₄)] ( 3 ) and [Cp₂Zr(C₄Fc₂Ph₂)] ( 5 ), respectively. The exchange of the zirconocene unit in 3 by hydrogen atoms opens the route to the super‐crowded ferrocenyl‐substituted compound tetraferrocenylbutadiene ( 4 ). On the other hand, the reaction of 1,4‐diferrocenylbuta‐1,3‐diyne with zirconocene complexes afforded a cleavage of the central C? C bond, and thus, dinuclear [{Cp₂Zr(μ‐η¹:η²‐C?CFc)}₂] ( 6 ) that consists of two zirconocene acetylide groups was formed. Most of the complexes were characterized by single‐crystal X‐ray crystallography, showing attractive multinuclear molecules. The redox properties of 3 , 5 , and 6 were studied by cyclic voltammetry. Upon oxidation to 3 ⁿ⁺, 5 ⁿ⁺, and 6 ⁿ⁺ (n=1–3), decomposition occured with in situ formation of new species. The follow‐up products from 3 and 5 possess two or four reversible redox events pointing to butadiene‐based molecules. However, the dinuclear complex 6 afforded ethynylferrocene under the measurement conditions.     

Titanium and Zirconium Complexes with Non‐Salicylaldimine‐Type Imine–Phenoxy Chelate Ligands: Syntheses,Structures, and Ethylene‐Polymerization Behavior

New Ti and Zr complexes that bear imine–phenoxy chelate ligands, [{2,4‐di‐tBu‐6‐(RCH=N)‐C₆H₄O}₂MCl₂] ( 1 : M=Ti, R=Ph; 2 : M=Ti, R=C₆F₅; 3 : M=Zr, R=Ph; 4 : M=Zr, R=C₆F₅), were synthesized and investigated as precatalysts for ethylene polymerization. ¹H NMR spectroscopy suggests that these complexes exist as mixtures of structural isomers. X‐ray crystallographic analysis of the adduct 1 ?HCl reveals that it exists as a zwitterionic complex in which H and Cl are situated in close proximity to one of the imine nitrogen atoms and the central metal, respectively. The X‐ray molecular structure also indicates that one imine phenoxy group with the syn C?N configuration functions as a bidentate ligand, whereas the other, of the anti C?N form, acts as a monodentate phenoxy ligand. Although Zr complexes 3 and 4 with methylaluminoxane (MAO) or [Ph₃C]⁺[B(C₆F₅)₄]^?/AliBu₃ displayed moderate activity, the Ti congeners 1 and 2 , in association with an appropriate activator, catalyzed ethylene polymerization with high efficiency. Upon activation with MAO at 25 °C, 2 displayed a very high activity of 19900 (kg PE) (mol Ti)^?1 h^?1, which is comparable to that for [Cp₂TiCl₂] and [Cp₂ZrCl₂], although increasing the polymerization temperature did result in a marked decrease in activity. Complex 2 contains a C₆F₅ group on the imine nitrogen atom and mediated nonliving‐type polymerization, unlike the corresponding salicylaldimine‐type complex. Conversely, with [Ph₃C]⁺[B(C₆F₅)₄]^?/AliBu₃ activation, 1 exhibited enhanced activity as the temperature was increased (25–75 °C) and maintained very high activity for 60 min at 75 °C (18740 (kg PE) (mol Ti)^?1 h^?1). ¹H NMR spectroscopic studies of the reaction suggest that this thermally robust catalyst system generates an amine–phenoxy complex as the catalytically active species. The combinations 1 /[Ph₃C]⁺[B(C₆F₅)₄]^?/AliBu₃ and 2 /MAO also worked as high‐activity catalysts for the copolymerization of ethylene and propylene.     

Novel catalyst system of MCl2/FeCl3·6H2O/PPh3 (M = Ni,Co, or Mn) for the atom transfer radical polymerization of methyl methacrylate

MCl₂ (M = Ni, Co, Sn, or Mn) and PPh₃ together acted as a catalyst for the radical polymerization of methyl methacrylate (MMA) in the presence of ethyl 2‐bromoisobutyrate as an initiator. The four systems all led to conventional radical polymerizations, which yielded polymers with a weight‐average molecular weight/number‐average molecular weight (M_w/M_n) ratio greater than 2.0 and became well controlled when a certain amount of FeCl₃·6H₂O was added. The polymerizations of MMA catalyzed by these four FeCl₃‐modified catalyst systems provided well‐defined polymers with low polydispersities (M_w/M_n < 1.28). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2625–2631, 2005     

Synthesis,characterization and reactions of the transition metal halogenoalkyl carbocation complexes [Cp(CO)2M{η2-CH2CH(CH2)nX}]PF6 (n = 1–8, 10, M = Fe; n = 3, 4 M = Ru; X = Br,I)

The halogenoalkyl complexes [Cp(CO)₂M{(CH₂)_nX}] (n = 3–10, 12, M = Fe; n = 5, 6, M = Ru, X = Br, I) react with Ph₃CPF₆ in dry CH₂Cl₂ to give the corresponding carbocation complexes [Cp(CO)₂M{η²-(CH₂CH(CH₂)_n?2X}]PF₆ in high yields. NMR evidence indicates that the metals form metallacyclopropane type structures with the carbocation ligand. The reactions of some of the cationic complexes with NaI, PPh₃, Na[Cp(CO)₂Fe] and Et₃N are discussed. NaI and Na[Cp(CO)₂Fe] displace the halogeno-olefin, while PPh₃ adds at the β-CH^δ+ giving the unstable phosphonium adducts [Cp(CO)₂Fe{CH₂CH(PPh₃)(CH₂)_n?2X}]PF₆ which decompose to the halogeno-olefins and the cationic PPh₃ complex [Cp(CO)₂Fe(PPh₃)]⁺. Et₃N causes allylic deprotonation forming internal olefin complexes of the type [Cp(CO)₂Fe{CH₂CHCH(CH₂)_n?3X}]PF₆.     

Lanthanide borohydrido complexes for MMA polymerization: syndio‐ vs iso‐ stereocontrol

This paper presents an extensive study of the polymerization of MMA with borohydrido lanthanide complexes for the first time. Catalytic systems are made from a lanthanide derivative bearing zero one, or two bulky ligands: substituted cyclopentadienyl (Cp^*′ = C₅Me₄nPr, Cp⁴ⁱ = C₅HiPr₄, Cp^Ph3 = H₂C₅Ph₃‐1,2,4), and/or diketiminate ([(p‐tol)NN] = [(p‐CH₃C₆H₄)N(CH₃)C]₂CH), in the presence of variable quantities of alkylating agent. With BuLi in apolar medium, highly isotactic polymer (up to 95.6%) is formed. In THF, syndiotactic‐rich PMMA is obtained whatever the nature of the co‐catalyst (BuLi or MgⁿBu₂). The presence of an electron‐withdrawing ligand such as Cp^Ph3 allows high syndioregularity, up to 81.8% at 0 °C, together with the highest conversion. There is quite good concordance between calculated and experimental molecular data in THF. Divalent Cp^*′₂Sm^II(THF) and (Cp^Ph3)₂Sm^II(THF) are active as single‐component initiators; the former affords PMMA 88% syndiotactic at 0 °C. Copyright © 2005 John Wiley & Sons, Ltd.     

The ligand effect in Ti‐mediated living radical styrene polymerizations initiated by epoxide radical ring opening. 1. Alkoxide and bisketonate Ti complexes

Bisketonate and alkoxide Ti(III) complexes derived from Zn reduction of Ti(IV) precursors were evaluated as catalysts for the living radical polymerization (LRP) of styrene initiated by Ti‐catalyzed epoxide radical ring opening and mediated by reversible termination with Ti(III). No polymerization occurred with tris(2,2,6, 6‐tetramethyl‐3,5‐heptanedionato)titanium (III), whereas dichlorobis(2,2,6,6‐tetramethyl‐3,5‐heptanedionato)titanium (IV) affords only a free radical polymerization. Preliminary living features were displayed by (ⁱPrO)₂TiCl₂. Investigations of the effect of epoxide/Ti/Zn ratios, temperature, and nature of the epoxide demonstrated that (ⁱPrO)₃TiCl provides a linear dependence of M_n on conversion over a wide range of conditions with an optimum for [Sty]/[epoxide group]/[Ti]/[Zn] = 50/1/2/4 at 90 °C. However, the polydispersity could not be reduced below 1.4–1.5, with an initiator efficiency of 0.15. These results were rationalized in terms of a combination of decreased Ti oxophilicity and ligand exchange. The lowered oxophilicity decreases the initiation rate and broadens M_w/M_n. The fast alkoxide exchange promotes a weak dependence of the polymerization on reaction conditions and generates macromolecular Ti species with reduced ability to mediate LRP. Thus, while monofunctional epoxides provide homogeneous polymerizations and narrower M_w/M_n, difunctional initiators may lead to gel formation at high conversion. Nonetheless, all polymerizations were light gray to colorless and afforded white polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6028–6038, 2005     

[CpR(OC)Mo(μ‐η2:2‐P2)2FeCpR′] als Edukt für heterobimetallische Zweikerncluster mit P2‐ und CnRnP4‐n‐Liganden (n = 1, 2)

[Cp^R(OC)Mo(μ‐η^2:2‐P₂)₂FeCp^R′] as Educt for Heterobimetallic Dinuclear Clusters with P₂ and C_nR_nP_4‐n Ligands (n = 1, 2) The cothermolysis of [Cp^R(OC)Mo(μ‐η^2:2‐P₂)₂FeCp^R′] ( 1 ) and tBuC≡P ( 2 ) as well as PhC≡CPh ( 3 ) affords the heterobimetallic triple‐decker like dinuclear clusters [(Cp'''Mo)(Cp*′Fe)(P₃CtBu)(P₂)] ( 4 ), Cp''' = C₅H₂tBu₃‐1,2,4, Cp*′ = C₅Me₄Et, and [(Cp*Mo)(Cp*Fe)(P₂C₂Ph₂)(P₂)] ( 5 ) with a bridging tri‐ and diphosphabutadiendiyl ligand. 4 and 5 have been characterized additionally by X‐ray crystallography.