Molecular design,synthesis, and properties of Y‐type nonlinear optical polyester containing tricyanovinylthiophene with enhanced thermal stability of second harmonic generation

1‐{3,4‐Di‐(2‐hydroxyethoxy)phenyl}‐2‐(2‐thiophenyl)ethene (5) was prepared and condensed with terephthaloyl chloride to yield polyester (6). Polymer 6 was reacted with tetracyanoethylene to give a new Y‐type polyester (7) containing 1‐(3,4‐dioxyethoxy)phenyl‐2‐{5‐(2,2,3‐tricyanovinyl)‐2‐thiophenyl)}ethenyl groups as NLO‐chromophores, which are components of the polymer backbones. Polyester 7 is soluble in common organic solvents such as N,N‐dimethylformamide and acetone. Polymer 7 showed a thermal stability up to 300 °C in thermogravimetric analysis with glass transition temperature (T_g) obtained from differential scanning calorimetry near 126 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at the 1560 nm fundamental wavelength was around 6.57 × 10^?9 esu. The dipole alignment exhibited high thermal stability up to the T_g, and there was no SHG decay below 125 °C due to the partial main‐chain character of polymer structure, which is acceptable for NLO device applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1911–1919, 2009     

Synthesis and nonlinear optical properties of novel Y‐type polyurethane containing tricyanovinylthiazole with enhanced thermal stability of second harmonic generation

A novel Y‐type poly[iminocarbonyloxyethyl‐5‐methyl‐4‐{2‐thiazolylazo‐4‐(1,2,2‐tricyanovinyl)}resorcinoxyethyloxycarbonylimino‐(3,3′‐dimethoxy‐4,4′‐biphenylene)] 4 containing 5‐methyl‐4‐{5‐(1,2,2‐tricyanovinyl)‐2‐thiazolylazo}resorcinoxy groups as nonlinear optical (NLO) chromophores, which constitute part of the polymer backbone, was prepared and characterized. Polyurethane 4 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It showed a thermal stability up to 250 °C in thermogravimetric analysis thermogram and the glass‐transition temperature (T_g) obtained from differential scanning calorimetry thermogram was around 118 °C. The second harmonic generation coefficient (d₃₃) of poled polymer films at 1560 nm fundamental wavelength was around 8.43 × 10^?9 esu. The dipole alignment exhibited a thermal stability even at 12 °C higher than T_g, and there was no SHG decay below 130 °C due to the partial main‐chain character of the polymer structure, which is acceptable for NLO device applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1166–1172, 2010     

Synthesis and electro‐optic properties of novel X‐type polyurethane containing nitrophenylazonitroresorcinoxy group with highly enhanced thermal stability of dipole alignment

Novel X‐type polyurethane 4 containing 4‐(4‐nitrophenylazo)‐6‐nitroresorcinoxy groups as nonlinear optical (NLO) chromophores, which are parts of the polymer main chains, was prepared and characterized. Polyurethane 4 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It shows thermal stabilities up to 270 °C from thermogravimetric analysis with glass transition temperature obtained from differential scanning calorimetry of about 134 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at 1064 nm fundamental wavelength is 5.37 × 10^?9 esu. Polymer 4 exhibits a thermal stability up to T_g, and no significant SHG decay is observed below 135 °C, which is acceptable for NLO device applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 760–766     

Synthesis and properties of novel Y‐type nonlinear optical polyimides with high thermal stability of second harmonic generation

2,4‐Bis‐(3,4‐dicarboxyphenylcarboxyethoxy)‐1‐(2,2‐dicyanovinyl)benzene dianhydride (4) was prepared and reacted with 4,4′‐oxydianiline, 4,4′‐diaminobenzanilide and 4,4′‐(hexafluoroisopropylidene)dianiline to yield novel Y‐type polyimides 5‐7 containing 2,4‐dioxybenzylidenemalononitrile groups as nonlinear optical (NLO) chromophores, which constitute parts of the polymer backbone. The resulting polyimides 5‐7 are soluble in polar solvents such as dimethylsulfoxide and N,N‐dimethylformamide. Polymers 5‐7 showed a thermal stability up to 330 °C in thermogravimetric analysis thermograms with T_g values obtained from differential scanning calorimetry thermograms in the range 179–194 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at the 1064 nm fundamental wavelength were around 5.56 × 10^?9 esu. The dipole alignment exhibited exceptionally high thermal stability even at 20 °C higher than the glass‐transition temperature there was no SHG decay below 215 °C because of the partial main‐chain character of polymer structure, which is acceptable for NLO device applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3078–3087, 2008     

The design,synthesis, and nonlinear optical properties of novel X‐type polyurethane containing dicyanovinylnitroresorcinoxy group with enhanced SHG thermal stability

Novel X‐type polyurethane 5 containing 4‐(2′,2′‐dicyanovinyl)‐6‐nitroresorcinoxy groups as nonlinear optical (NLO) chromophores, which constitute parts of the polymer backbone, was prepared and characterized. Polyurethane 5 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It shows thermal stability up to 280 °C from thermogravimetric analysis with a glass transition temperature (T_g) obtained from differential scanning calorimetry thermogram of around 120 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at 1064‐nm fundamental wavelength is around 6.12 × 10^?9 esu. The dipole alignment exhibits a thermal stability even at 5 °C higher than T_g, and there was no SHG decay below 125 °C due to the partial main chain character of the polymer structure, which is acceptable for NLO device applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and nonlinear optical properties of novel Y-type polyimides with enhanced thermal stability of dipole alignment

2,3-Bis-(3,4-dicarboxyphenylcarboxyethoxy)-4′-nitrostilbene dianhydride (4) was prepared and reacted with 1,4-phenylenediamine, 4,4′-oxydianiline, 4,4′-diaminobenzanilide and 4,4′-(hexafluoroisopropylidene)dianiline to yield novel polyimides 5-8 containing 2,3-dioxynitrostilbenyl groups as NLO-chromophores, which constituted parts of the polymer backbones. The resulting polyimides 5-8 were soluble in polar solvents such as acetone and DMF. Polymers 5-8 showed a thermal stability up to 300 °C in TGA thermograms with T_g values obtained from DSC thermograms in the range of 135-160 °C. The SHG coefficients (d₃₃) of poled polymer films at the 1064 cm⁻¹ fundamental wavelength were around 5.26 × 10⁻⁹ esu. The dipole alignment exhibited exceptionally high thermal stability even at 30 °C higher than T_g and there was no SHG decay below 170-190 °C due to the partial main chain character of polymer structure, which was acceptable for NLO device applications.     

Molecular design,synthesis, and nonlinear optical properties of novel T‐type polyimides with exceptionally high thermal stability of the second harmonic generation

2,5‐Bis‐(3,4‐dicarboxyphenylcarboxyethoxy)‐4′‐nitrostilbene dianhydride was prepared and reacted with 1,4‐phenylenediamine, 4,4′‐oxydianiline, 4,4′‐diaminobenzanilide, and 4,4′‐(hexafluoroisopropylidene)dianiline to yield unprecedented novel T‐type polyimides ( 4 – 7 ) containing 2,5‐dioxynitrostilbenyl groups as nonlinear optical chromophores, which constituted parts of the polymer backbones. 4 – 7 were soluble in polar solvents such as acetone and N,N‐dimethylformamide. They showed thermal stability up to 300 °C in thermogravimetric analysis thermograms; the glass‐transition temperatures obtained from differential scanning calorimetry thermograms were around 153 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at the 1064‐cm^?1 fundamental wavelength were around 4.35 × 10^?9 esu. The dipole alignment exhibited exceptionally high thermal stability even at 45 °C higher than the glass‐transition temperature, and there was no SHG decay below 200 °C because of the partial main‐chain character of the polymer structure, which was acceptable for nonlinear optical device applications. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3189–3199, 2004     

Synthesis and characterization of Y‐type polymers for second‐order nonlinear optical applications

A series of dicyanomethylene‐substituted polymers having Y‐type molecular architecture were synthesized by Knoevenagel condensation reaction. The polymers were found to be soluble in organic solvents like tetrahydrofuran and chloroform. From gel permeation chromatography, the molecular weights of the polymers were found to be in the range of 15,300–33,800 g/mol. Thermal analysis showed that the polymers were stable up to 350 °C with glass transition temperature (T_g) in the range of 129–212 °C. These polymers were found to form good optical quality films. The order parameter was calculated to be in the range of 0.01–0.48. Atomic force microscopy indicated prominent morphology changes due to alignment of dipoles after poling. By using Nd:YAG laser of 1064 nm, angular dependence and temperature dependence of second‐harmonic generation intensity were investigated. The geometry optimization, shape of polymers, and restricted torsion angle between acceptor and donor substituents (push–pull system) were calculated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Preparation and nonlinear optical properties of novel Y-type polyesters with highly enhanced thermal stability of second harmonic generation

3,4-Di-(2′-hydroxyethoxy)benzylidenemalononitrile (3) was prepared and condensed with terephthaloyl chloride and adipoyl chloride to yield novel Y-type polyesters (4-5) containing 3,4-dioxybenzylidenemalononitrile groups as NLO-chromophores, which constituted parts of the polymer main-chains. The resulting polymers 4-5 are soluble in common organic solvents such as acetone and N,N-dimethylformamide. They showed thermal stability up to 300 °C in thermogravimetric analysis with glass-transition temperatures obtained from differential scanning calorimetry in the range 89-91 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at the 1064 nm fundamental wavelength were around 2.47 pm/V. The dipole alignment exhibited high thermal stability even at 10 °C higher than T_g, and there is no SHG decay below 100 °C due to the partial main-chain character of polymer structure, which is acceptable for NLO device applications.     

Synthesis and properties of novel polyurethanes containing 3,4‐dioxybenzylidenecyanoacetate group as a nonlinear optical chromophore

Methyl 3,4‐di‐(2′‐hydroxyethoxy)benzylidenecyanoacetate ( 3 ) was prepared by hydrolysis of methyl 3,4‐di‐(2′‐vinyloxyethoxy)benzylidenecyanoacetate ( 2 ). Diol 3 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate, and 1,6‐hexamethylenediisocyanate to yield polyurethanes 4 – 6 containing the nonlinear optical chromophore 3,4‐dioxybenzylidenecyanoacetate. The resulting polyurethanes 4 – 6 were soluble in common organic solvents such as acetone and dimethylformamide. Polymers 4 – 6 indicated thermal stability up to 300 °C in thermogravimetric thermograms with glass‐transition temperature values obtained from differential scanning calorimetric thermograms in the range of 78–102 °C. The second‐harmonic generation coefficients (d₃₃) of the poled polymer films were around 6.9 × 10^?9 esu. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1742–1748, 2002     

Synthesis and characterization of interpenetrating polymer networks with nonlinear optical properties

We report the synthesis and characterization of interpenetrating polymer networks (IPNs) exhibiting nonlinear optical (NLO) properties. The network consists of aliphatic polycarbonate urethane (PCU) and poly(methyl methacrylate-co-N,N-disubstituted urea), with a nonlinear optical (NLO) chromophore incorporated into N,N-disubstituted urea. The full IPNs have only one T_g, as determined by differential scanning calorimetry (DSC), together with scanning electron microscopy (SEM) observations, suggest a single phase morphology. The thin films of IPNs are transparent and the unpoled samples produced second harmonic generation (SHG) signals at room temperature. This result indicates that the NLO chromophore is oriented noncentrosymmetrically during the IPN formation process and is tightly held between the permanent entanglements of the two component networks of the IPN. © 1996 John Wiley & Sons, Inc.     

Characterization of a side chain polymer for second‐order nonlinear optical properties

We report the characterization of copolymers of methyl methacrylate (MMA) and 2‐propenoic acid, 2‐methyl‐, 2‐[[[[4‐methyl‐3‐[[(2‐methyl‐4‐nitrophenyl)amino]carbonyl]aminophenyl]carbonyl]oxy]ethyl ester (PAMEE) exhibiting nonlinear optical (NLO) properties. The linear copolymer, poly(MMA‐co‐PAMEE), with a NLO chromophore incorporated into PAMME exhibits a high glass transition temperature of 131°C, as determined by DSC. The thin films of copolymers, which were cast on microscopic glass slides, were optically transparent, and the corona poled polymers produced relatively large and stable second harmonic generation (SHG) signals at room temperature. The nonlinear coefficient d₃₃ of the crosslinked copolymer containing 30 wt % PAMEE was 30.8 pm/V. The SHG signal strength remained unchanged, even after 120 days, and exhibited excellent thermal stability at 65°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1245–1254, 1999     

Synthesis and nonlinear optical properties of polyester containing 4‐di‐(2′‐hydroxyethoxy)‐4‐diphenyl‐hydrazonomethyl chromophore

The nonlinear optical property of new polyester has been studied via second harmonic generation (SHG). The values of electro‐optic coefficients, d₃₃ and d₃₁, of the poled polymer film were 3.15 × 10 ^?7 and 1.5 × 10^?7 esu, respectively. Thermal behavior of this polyester was studied through thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). 4‐di‐(2′‐hydroxyethoxy)‐4‐diphenyl‐hydrazonomethyl was synthesized from the reaction of 3,4‐dihydroxy‐4‐diphenyl‐hydrazonomethyl with 2–chloro–1‐ethanol in a 1:2 mole ratio and subsequently reacted with terephthaloyl chloride (TPC) in the presence of pyridine, as catalyst, to produce the new nonlinear polyester. The chemical structures of the resulting monomers and polymer were characterized by CHN analysis, ¹H‐NMR, FT‐IR, and UV–Vis spectroscopy. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of chromophores and polyimides with a green chemistry approach for second‐order nonlinear optical applications

This article presents the synthesis of nonlinear optical responsive chromophores by adopting a green chemistry approach by coupling N‐methyl‐N‐(2‐hydroxyethyl)‐4‐amino benzaldehyde with barbituric acid, 1,3‐indanedione, and 1,3‐diethyl‐2‐thiobarbituric acid as the acceptors through stilbene linkage. We performed the synthesis in less than 10 minutes at room temperature with water as a solvent without catalyst. Two different side‐chain polyimides were synthesized from poly(hydroxy‐imide)s with chromophores by Mitsunobu reaction. The chromophores were characterized by Fourier transform infrared, ¹H NMR, ¹³C NMR, and elemental analysis. However, the polyimides were characterized by Fourier transform infrared and ¹H NMR. The inherent viscosities (η_inh) of polyimides were determined by Ubbelohde viscometer, which ranged between 0.1793 and 0.1890 dL/g. The molecular weights of the polyimides were determined using gel permeation chromatography and were in range of 23 000 to 26 000. Polyimides demonstrated an excellent solubility in polar aprotic solvents, indicating good processability. Thermal behavior of these polyimides was studied by differential scanning calorimetry and thermogravimetric analysis. The T_g's were in the range of 185°C to 255°C. The change in the molecular orientation in the polymer films after electrical poling was ascertained using ultraviolet‐visible spectrophotometer and atomic force microscopy. The thicknesses and refractive indices of the thin films were determined by an ellipsometer. The second harmonic generation coefficients of the corona‐poled polymer films at T_opt's, determined by the Maker fringe technique, ranged between 59.33 and 77.82 pm/V. High thermal endurance observed for the polyimides is attributed to the extensive hydrogen bonds in the matrix. The developed polyimides showed no decay in second harmonic generation signals below 110°C, indicating the acceptance for nonlinear optical devices.     

Synthesis and characterization of copolymaleimides containing 4‐cyanobiphenyl‐based side groups for nonlinear optical applications

We report the synthesis of a nematic copolymer, P(CBMS‐co‐M₃), prepared by free radical polymerization of an equimolecular mixture of p‐(4‐cyanobiphenyl‐4′‐yloxy)methylstyrene (CBMS) and N‐[3‐(4‐cyanobiphenyl‐4′‐yloxy)propyl]maleimide (M₃) and two isotropic alternating copolymers, P(S‐alt‐M_n) (n = 3,6) prepared by chemical modification of poly(styrene‐alt‐maleimide), P(S‐alt‐M), by n‐(4‐cyanobiphenyl‐4′‐yloxy)alkan‐1‐ol. These copolymaleimides were characterized by NMR, DSC, and optical microscopy. Some corona poling experiments were performed and the second harmonic coefficients d₃₁ and d₃₃ were measured. It was shown that one can gain in net polar ordering by starting with a liquid crystalline system. The ratio d₃₃/d₃₁ was much larger than 3, in agreement with the molecular statistical models for electric field poling of liquid crystals. At ambient conditions, changes of d₃₃ and d₃₁ are 15% over 325 days. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 513–524, 1999     

Click chemistry‐based synthesis of azo polymers for second‐order nonlinear optics

Four linear polymers containing pendant azo moiety were synthesized through click chemistry for second‐order nonlinear optical study. The polymers were found soluble in most of the polar organic solvents such as tetrahydrofuran (THF), chloroform, and dimethyl formamide (DMF). The polymers showed thermal stability up to 300 °C and glass transition temperatures (T_g) in the range of 120–140 °C. The molecular weights (M_w) of these polymers (measured by gel permeation chromatography) were in the range 37,900–55,000 g/mol. The polymers were found to form optically transparent films by solution casting from THF solution. Order parameters were calculated from UV–vis absorption spectra. The morphology changes in the films after poling were characterized by atomic force microscopy. The angular dependence, temperature dependence, and time dependence of second harmonic generation (SHG) intensity were obtained by using 1064 nm Nd:YAG laser. The SHG intensity remained unchanged up to 95 °C. At room temperature, it remained stable up to 8 days after initial drop of about 14%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and nonlinear optical properties of hyperbranched polytriazole containing second‐order nonlinear optical chromophore

The hyperbranched polytriazole (hb‐PTA) containing second‐order nonlinear optical chromophore was synthesized through “A₂ + B₃” approach based on “click reaction.” Its corresponding linear analogue (l‐PTA) was prepared for comparison. The hb‐PTA has better solubility in common organic solvents than the l‐PTA. Both the polymers exhibit good thermal stability with 5% weight loss temperatures over 260 °C. The poled film of hb‐PTA exhibits much higher second‐harmonic coefficient (96.8 pm/V) than that of l‐PTA (23.5 pm/V). The three‐dimensional spatial isolation effect resulting from the highly branched structure and the crosslinking of the terminal acetylene groups at moderate temperature play important roles in the enhancement of optical nonlinearity. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1140–1148, 2008     

Synthesis of POSS–polyurethane hybrids using octakis(m‐isoprenyl‐α,α′‐dimethylbenzylisocyanato dimethylsiloxy) octasilsesquioxane (Q8M8TMI) as a crosslinking agent

A series of polyurethane hybrid networks have been synthesized using octakis(m‐isoprenyl‐α,α′‐dimethylbenzylisocyanato dimethylsiloxy) octasilsesquioxane (Q₈M₈^TMI) as a crosslinking agent. The formation of the urethane linkages within the polyurethane hybrids was confirmed by photoacoustic FTIR spectroscopy. The TGA and DSC studies demonstrated that the incorporation of the POSS crosslinking agents altered the thermal properties of the polyurethanes, and that this was dependent on the length of the polyethylene glycol chain. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5038–5045     

Synthesis and properties of a second‐order nonlinear optical side‐chain polyimide

A thermal stable aromatic polyimide (PI) with side‐chain second‐order nonlinear optical (NLO) chromophores has been developed. The PI was prepared by the ring‐opening polyaddition of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride with a new diamine having two N‐ethyl‐N‐[4‐[(6‐chlorobenzothiazol‐2‐yl)diazenyl]phenyl]‐2‐aminoethanol units as the NLO chromophore, followed by poling during or after the thermal imidization process. The resulting PI had number and weight‐average molecular weights (M_n, M_w) of 25,000 and 80,000, respectively, and a relatively high glass transition temperature of 180°C. The second harmonic coefficient (d₃₃) of PI at the wavelength of 1.064 μm was 138 pm/V (329.6 × 10⁻⁹ esu) and remained unchanged at elevated temperatures. The corona poling process of the NLO‐substituted poly(amic acid) to the PI was also studied in detail by measuring the second harmonic generation (SHG) from the polymer films. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1321–1329, 1999     

Synthesis and thermal stability of xylene-formaldehyde resins

o-,p- andm-xylene have been condensed with formaldehyde using paratoluene sulphonic acid as a catalyst and acetic acid/acetic anhydride as a solvent. The xylene-formaldehyde resins thus obtained have been characterised by IR and NMR spectra. The average molecular weight of the resin samples was determined by vapour pressure osmometry. Kinetic parameters were determined by differential thermal analysis, thermogravimetry and differential scanning calorimetry.