Covalent surface functionalization of multiwalled carbon nanotubes through bergman cyclization of enediyne‐containing dendrimers

A method for covalent functionalization of multiwalled carbon nanotubes (MWCNTs) was developed using the free radicals generated through Bergman cyclization of enediyne‐containing compounds. Four enediyne‐bearing Frechet type dendrimers were synthesized in good quantities and characterized. Then, the enediyne‐containing molecules were reacted with MWCNTs in N‐methyl‐2‐pyrrolidinone at 206 °C under nitrogen. The structure and morphology of the resulting products were characterized by thermogravimetric analysis, ultraviolet–visible spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, and transmission electron microscopy. The dendrimer‐functionalized MWCNTs showed good solubility/dispersibility in common organic solvents and polymer solutions. They were used in the formation of polymer composites through electrospinning with polycaprolactone. The results confirmed the surface functionalization of MWCNTs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and self‐assembly of amphiphilic dendronized conjugated polymers

Two kinds of amphiphilic dendronized conjugated polymers, polyfluorene (PF) and poly(binaphthyl‐alt‐fluorene) (PBF), were synthesized by Suzuki polycondensation of hydrophobic macromonomers with two nonpolar octyloxy chains and hydrophilic macromonomers with two polar oligo(ethylene oxide) chains. In these polymers, PF possesses a linear rod‐like backbone structure, and PBF adopts a folded rigid backbone structure. The different configurations in the conjugated main chains result in different supramolecular self‐assembly morphologies. The optical and thermal properties of PF and PBF were also studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 574–584, 2008     

Synthesis of narrow‐polydispersity degradable dendronized aliphatic polyesters

The divergent dendronization of an ?‐caprolactone‐based polymer has been performed to provide access to dendronized polymers with sufficient biocompatibility and degradability for use as drug‐delivery scaffolds. The synthesis was performed through the tin(II) 2‐ethylhexanoate‐catalyzed polymerization of a γ‐functionalized ?‐caprolactone monomer, followed by the divergent growth of pendant polyester dendrons at each repeat unit. The resulting dendronized polymers were obtained up to the fourth generation with molecular weights as high as 80,000 Da and with polydispersities between 1.11 and 1.22. The fourth‐generation hydroxyl‐terminated dendronized polymer was degradable under a variety of aqueous conditions. A comparison of the dendronization approach with a procedure involving the ring‐opening polymerization of a second‐generation dendritic macromonomer reveals that the former procedure is best suited for the preparation of this family of dendronized polyesters because it requires shorter reaction times and affords materials with higher degrees of polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3563–3578, 2004     

Synthesis of porphyrin‐embedded dendronized polymers by Suzuki polycondensation

Porphyrin‐embedded high molecular weight dendronized polymers up to fourth generation have been synthesized by Suzuki polycondensation of Fréchet‐type dendritic dibromo macromonomers and porphyrin diboronic pinacol ester. Higher generation lateral dendritic wedges not only endow the dendronized polymers with good solubility in commonly used organic solvents, but also prevent planar porphyrins and conjugated polymer backbones from aggregating by their “site isolation” effect. This type of porphyrin‐embedded dendronized polymers can be used as saturated red light‐emitting materials. With the increase of the generation of the lateral dendrons, the quantum yields of the dendronized polymers also gradually increased. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4030–4037, 2008     

Dendronized supramolecular polymers self‐assembled from dendritic ionic liquids

The synthesis, structural, and retrostructural analysis of a library of self‐assembling dendrons containing triethyl and tripropyl ammonium, pyridinium and 3‐methylimidazolium chloride, tetrafluoroborate, and hexafluorophosphate at their apex are reported. These dendritic ionic liquids self‐assemble into supramolecular columns or spheres which self‐organize into 2D hexagonal or rectangular and 3D cubic or tetragonal liquid crystalline and crystalline lattices. Structural analysis by X‐ray diffraction experiments demonstrated the self‐assembly of supramolecular dendrimers containing columnar and spherical nanoscale ionic liquid reactors segregated in their core. Both in the supramolecular columns and spheres the noncovalent interactions mediated by the ionic liquid provide a supramolecular polymer and therefore, these assemblies represent a new class of dendronized supramolecular polymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4165–4193, 2009     

Synthesis of dendronized polymer brushes containing metallo‐supramolecular polymer side chains

A new kind of dendronized polymer brush with metallo‐supramolecular polymer side chains was fabricated by a combination of macromonomer and graft‐to approach. The alternating copolymers of maleic anhydride and styryl macromonomers pendant with Fréchet‐type dendrons of three generations were reported previously. In this article, terpyridine groups were introduced along the backbone of the dendronized polymers through the amidolysis of anhydride groups. The terpyridine functionalized PEO linear chains were then incorporated through the complexation of terpyridine and Ru(II) ion. Thus, dendronized polymer brushes with amphiphilic properties were synthesized. AFM analysis showed worm‐like single molecular morphologies of the polymers of three generations, and ¹H NMR analysis indicated that such molecular brushes had an amphiphilic nature in solution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3303–3310, 2007     

Light harvesting and energy transfer within coumarin‐labeled polymers

Linear copolymers that have pendant coumarin‐2 and coumarin‐343 chromophores were prepared as analogues to previously synthesized light‐harvesting dendrimers. The chromophore ratios within these polymers were maintained similar to those of the various generation dendrimers to investigate the effect of polymer architecture on the energy‐transfer efficiency between the coumarin‐2 donors and coumarin‐343 acceptors. Both physical and photophysical properties of these polymers were analyzed and compared to those of the analogous dendrimers. Energy‐transfer efficiencies were relatively high in the polymers; however, deleterious excimer formation between the coumarin‐343 chromophores diminished the quantum yield of fluorescence of the polymers when compared to the analogous dendrimers. Overall, it was found that the ultimate performance of the dendritic light‐harvesting antennae was superior to that of the polymeric analogues, but the polymers were more practical in terms of synthetic accessibility. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1366–1373, 2001     

Synthesis of dendrimers through divergent iterative thio‐bromo “Click” chemistry

The development of a novel nucleophilic thio‐bromo “Click” reaction, specifically base‐mediated thioetherification of thioglycerol with α‐bromoesters, is reported. Combination of this thio‐bromo click reaction with subsequent acylation with 2‐bromopropionyl bromide provides an iterative two‐step divergent growth approach to the synthesis of a new class of poly(thioglycerol‐2‐propionate) (PTP) dendrimers. This approach is demonstrated in the rapid preparation of four generation (G1–G4) of PTP dendrimers with high‐structural fidelity. The isolated G1–G4 bromide‐terminated dendrimers can be used directly as dendritic macroinitiators for the synthesis of star‐polymers via SET‐LRP. Additionally, the intermediate hydroxy‐terminated dendrimers are analogs of other water‐soluble polyester and polyether dendrimers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3931–3939, 2009     

End‐functionalization of semiconducting species with dendronized terpyridine–Ru(II)–terpyridine complexes

Semiconducting oligomers and polymers decorated with two or one dendronized tpy‐Ru(II)‐tpy metallocomplexes are presented. Initially, free terpyridine end‐functionalized semiconducting oligomers (distyrylanthracene, quinquephenylene, mono‐ and trifluorenes) were prepared while in a second approach, atom transfer radical polymerization was employed for the preparation of side‐chain oligomeric and polymeric (oxadiazole)s using a terpyridine initiator. These terpyridine‐bearing oligomers and polymers were complexated with a Percec‐type first‐generation (G1) dendronized terpyridine–Ru(III)Cl₃ monocomplex, having two dodecyloxy groups. All oligomeric and polymeric metallocomplexes were characterized via NMR spectroscopies for their structural perfection and via UV‐Vis and PL spectroscopies for their optical properties. The existence of the organic semiconducting blocks in combination with the terpyridine–Ru(II)–terpyridine groups afforded hybrid metallo‐semiconducting species presenting the optical features of both their components. Moreover, their thin‐film morphologies were investigated through atomic force microscopy, revealing, in some cases, an organization tendency in the nanometer scale. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1939–1952, 2009     

Synthesis and characterization of poly(fluorene‐co‐alt‐phenylene) containing 1,3,4‐oxadiazole dendritic pendants

A series of poly(fluorene‐co‐alt‐phenylene)s containing various generations of dendritic oxadiazole (OXD) pendent wedges were synthesized by the Suzuki polycondensation of OXD‐functionalized 1,4‐dibromophenylene with 9,9‐dihexylfluorene‐2,7‐diboronic ester. The obtained polymers possessed excellent solubility in common solvents and good thermal stability. Photophysical studies showed that the dendronized polymers appended with higher generations of OXD dendrons exhibited enhanced photoluminescence efficiencies and narrower values of the full width at half‐maximum. This was attributed to the shielding effect induced by the bulky dendritic OXD side chains, which prevented self‐quenching and suppressed the formation of aggregates/excimers. The energy transfer from the OXD dendrons to the polymer backbones was very efficient when excitation of the peripheral OXD dendrons resulted mainly in the polymer backbone emission alone. In particular, the photoluminescence emission intensities by the sensitized excitations of OXD dendrons in solid films of the polymers were all stronger than those by the direct excitations of their polymer conjugated backbones. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6765–6774, 2006     

New polymers derived from 4‐vinylsilylbenzocyclobutene monomer with good thermal stability,excellent film‐forming property,and low‐dielectric constant

A series of benzocyclobutene (BCB) polymers derived from a new readily available monomer, 4‐(1′,1′‐dimethyl‐1′‐vinyl) silylbenzocyclobutene (4‐DMVSBCB), were conveniently prepared by radical and anionic polymerization. The homo‐ and co‐polymerization results show that the reactivity of 4‐DMVSBCB in anionic polymerization is relatively higher compared with radical polymerization. The molecular weight of 4‐DMVSBCB polymers and content of 4‐DMVSBCB can be controlled by anionic copolymerization. The introduction of rigid and crosslinkable BCB building blocks in side chains and carbosilanes in molecule gives rise to insulating materials with good film‐forming property, smooth and flat film surface, and low‐dielectric constants of 2.41–2.45, as preserving good thermal stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of aromatic oxazolyl‐ and carboxyl‐functionalized polymers: Atom transfer radical polymerization of styrene initiated by 2‐[(4‐bromomethyl)phenyl]‐4,5‐dihydro‐4,4‐dimethyloxazole

The synthesis of a new compound, 2‐[(4‐bromomethyl)phenyl]‐4,5‐dihydro‐4,4‐dimethyloxazole ( 1 ), and its utility in the synthesis of oxazoline‐functionalized polystyrene by atom transfer radical polymerization (ATRP) methods are described. Aromatic oxazolyl‐functionalized polymers were prepared by the ATRP of styrene, initiated by ( 1 ) in the presence of copper(I) bromide/2,2′‐bipyridyl catalyst system, to afford the corresponding α‐oxazolyl‐functionalized polystyrene ( 2 ). The polymerization proceeded via a controlled free radical polymerization process to produce the corresponding α‐oxazolyl‐functionalized polymers with predictable number‐average molecular weights, narrow molecular weight distributions in high‐initiator efficiency reactions. Post‐ATRP chain end modification of α‐oxazolyl‐functionalized polystyrene ( 2 ) to form the corresponding α‐carboxyl‐functionalized polystyrene ( 3 ) was achieved by successive acid‐catalyzed hydrolysis and saponification reactions. The polymerization processes were monitored by gas chromatography analyses. The unimolecular‐functionalized initiator and functionalized polymers were characterized by thin layer chromatography, spectroscopy, size exclusion chromatography, and nonaqueous titration analysis. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Hypervalent iodine‐mediated direct azidation of polystyrene and consecutive click‐type functionalization

Polystyrene was directly azidated in 1,2‐dichloroethane or chlorobenzene using a combination of trimethylsilyl azide and a hypervalent iodine (III) compound, (diacetoxyiodo)benzene. 2D NMR HMBC experiments indicated that the azide groups were attached to the polymer backbone and also possibly to the aromatic pendant groups. The amount of introduced azide groups was estimated by semi‐quantitative IR spectroscopy and elemental analysis. Approximately 1 in every 11 styrene units could be modified by using a ratio of hypervalent iodine compound to trimethylsilyl azide to styrene units of 1:2.1:1 at 0 °C for 4 h followed by heating to 50 °C for 2 h in chlorobenzene. The azidated polymers were further used as backbone precursors in the synthesis of polymeric brushes with hydrophilic side chains via a copper‐catalyzed click grafting‐onto reaction with poly(ethylene oxide) monomethyl ether 4‐pentynoate. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 966–974, 2010     

Synthesis,characterization, and self‐assembly of comb‐dendronized amphiphilic block copolymers

Novel amphiphilic comb‐dendronized diblock copolymers composed of hydrophobic Percec‐type dendronized polystyrene block and hydrophilic comb‐like poly(ethylene oxide) grafted polymethacrylate P(PEOMA) block were designed and synthesized via two steps of atom transfer radical polymerization (ATRP). The comb‐like P(PEOMA) prepared by ATRP of macromonomers (PEOMA) with two different molecular weights (M_n = 300 and 475) were used to initiate the sequent ATRP of dendritic styrene macromonomer (DS). The molecular weights and compositions of the obtained block copolymers were determined by ¹H NMR analysis. The copolymers with relatively narrow polydispersities (1.27–1.38) were thus obtained. The bulk properties of comb‐dendronized block copolymers were studied by using differential scanning calorimetry, polarized optical microscopy and wide‐angle X‐ray diffraction (WAXD). Similar to dendronized homopolymers, the block copolymers exhibited hexagonal columnar liquid‐crystalline phase structure. By using such amphiphilic comb‐dendronized block copolymers as building blocks, the rich self‐assembly morphologies, such as twisted string, vesicle, and large compound micelle (LCM), were obtained in a mixture of CH₃OH and THF. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4205–4217, 2008     

Precise synthesis of well‐defined dendrimer‐like star‐branched polymers by iterative methodology based on living anionic polymerization

Dendrimer‐like star‐branched polymers recently developed as a new class of hyperbranched polymers, which resemble well‐known dendrimers in branched architecture, but comprise polymer chains between junctions, are reviewed in this highlight article. In particular, we focus on the precise synthesis of various dendrimer‐like star‐branched polymers and block copolymers by the recently developed methodology based on iterative divergent approach using living anionic polymers and 1,1‐bis(3‐tert‐butyldimethylsilyloxymethylphenyl)ethylene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6659–6687, 2006     

Synthesis and polymerization of first‐generation dendritic methacrylate macromonomers

First‐generation dendritic macromonomers with a methacryloyl end group on one side, long alkyl chains on the other side, and a biuret system with two urethane groups in the core have been synthesized. The synthesis comprises three steps with hexamethylene diisocyanate uretdione as the starting material. The branching points were introduced via biuret groups and the prepared macromonomers were polymerized by free and controlled radical polymerization. Depending on the reaction conditions linear dendronized polymers as well as branched dendronized polymers and microgels with long alkyl chains were obtained. Scanning force microscopy was used to visualize high molecular weight molecules spincoated on highly oriented pyrolytic graphite. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 614–628, 2007     

Spacer‐length‐dependent association in polymers with multiple‐hydrogen‐bonded end groups

Herein, we investigate the influence of spacer length on the homoassociation and heteroassociation of end‐functionalized hydrogen‐bonding polymers based on poly(n‐butyl acrylate). Two monofunctional ureido‐pyrimidinone (UPy) end‐functionalized polymers were prepared by atom transfer radical polymerization using self‐complementary UPy‐functional initiators that differ in the spacer length between the multiple‐hydrogen‐bonding group and the chain initiation site. The self‐complementary binding strength (K_dim) of these end‐functionalized polymers was shown to depend critically on the spacer length as evident from ¹H NMR and diffusion‐ordered spectroscopy. In addition, the heteroassociation strength of the end‐functionalized UPy polymers with end‐functionalized polymers containing the complementary 2,7‐diamido‐1,8‐naphthyridine (NaPy) hydrogen‐bond motif is also affected when the aliphatic spacer length is too short. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Comb‐like polymers pendanted with elastin‐like peptides showing sharp and tunable thermoresponsiveness through dynamic covalent chemistry

Comb‐like polymers carrying two elastin‐like polypeptide (ELP) pendants in each repeat unit were synthesized. The densely attached peptide chains afford these polymers with sharp thermally induced phase transitions, and their lower critical solution temperature (LCST) can be varied with molecular weights, solution pH and salt concentrations. Through amino terminals in ELP pendants, oligoethylene glycol (OEG)‐based dendrons cored with aldehyde were attached to the polymers through dynamic covalent imines. By virtue of dynamic characteristics of these novel dendronized polymers, their LCSTs can be tuned significantly by dendron coverage to shift from that dominated by ELPs to that dominated by OEG dendrons. Furthermore, dendron coverage can be enhanced obviously by the thermally induced phase transitions or greatly by freezing the polymer aqueous solutions. The work provides a convenient methodology to improve thermoresponsiveness of ELPs through polymer topology and to switch their properties through dynamic covalent chemistry. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3379–3387     

Photovoltaic response to structural modifications on a series of conjugated polymers based on 2‐aryl‐2H‐benzotriazoles

The synthesis, characterization, and photovoltaic properties of a series of four conjugated polymers containing 2‐aryl‐2H‐benzotriazoles and “bis(thiopheno)dialkylfluorenes” is described. The polymers were obtained via Suzuki‐polycondensation and comprise alternating electron rich and electron poor building blocks. The impact of systematic structural changes on the electronic and morphological properties and device efficiencies were studied. Application of these polymers as light‐harvesting and electron‐donating materials in organic solar cells using PCBM derivatives as electron accepting materials resulted in power conversion efficiencies up to 1.8%. Both the properties of the pristine polymers and the device performance show that the impact of the substitution farther‐off the backbone is negligible while substitution directly on the backbone has a major impact. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Highly stable rigid main‐chain nonlinear optical polymers with nematic phase: Effect of liquid‐crystalline phase on nonlinear optical response

Nonlinear optical (NLO) rigid main‐chain polyesters containing azobenzene mesogens with high thermal and temporal stabilities were synthesized from derivatives of hydroxyphenylazobenzoic acid. The NLO properties of the homopolymer, poly[4‐(4‐hydroxy‐3‐methyl phenyl)azo]benzoic acid, and copolymers of 4‐[(4‐hydroxy‐3‐methylphenyl)azo]benzoic acid, 4‐[(4‐hydroxy‐2‐methylphenyl)azo]benzoic acid, and 4‐[(4‐hydroxy‐2‐pentadecyl phenyl)azo]benzoic acid (PSCpHBA) with p‐HBA were measured by the Maker fringe technique. The thermal and liquid‐crystalline (LC) phase behaviors of the polymers were examined by differential scanning calorimetry, a thermal‐stimulated polarization current, and polarized light microscopy. The polymers except PSCpHBA exhibited nematic‐threaded and Schlieren textures. The LC orientations give rise to an enhanced NLO response. The polymers had high thermal and temporal stabilities for second‐harmonic generation activity because of their rigid aromatic backbone. This study suggests that the rigid aromatic main chain exhibiting an LC phase is a promising simple method to synthesize highly stable NLO polymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1527–1535, 2003