One‐Step Preparation of Antimicrobial Polyrhodanine Nanotubes with Silver Nanoparticles

A simple synthetic method has been developed for the fabrication of antimicrobial polyrhodanine nanotubes with silver nanoparticles. Rhodanine monomer first forms one‐dimensional complexes with silver ions due to coordinative interactions and consecutively reduces the silver ions during chemical‐oxidation polymerization. The polymerization procedure is analyzed by transmission electron microscopy and scanning electron microscopy in situ. The synthesized silver nanoparticles/polyrhodanine nanotubes are applied as an antimicrobial agent against Gram‐negative bacteria, E. coli and Gram‐positive bacteria, S. aureus. The antimicrobial tests demonstrate that the silver/polyrhodanine nanotubes have superior antimicrobial properties to silver nanoparticles and rhodanine monomer.

     

Self‐Assembled Poly(N‐methylaniline)–Lignosulfonate Spheres: From Silver‐Ion Adsorbent to Antimicrobial Material

Self‐assembled poly(N‐methylaniline)–lignosulfonate (PNMA–LS) composite spheres with reactive silver‐ion adsorbability were prepared from N‐methylaniline by using lignosulfonate (LS) as a dispersant. The results show that the PNMA–LS composite consisted of spheres with good size distribution and an average diameter of 1.03–1.27 μm, and the spheres were assembled by their final nanofibers with an average diameter of 19–34 nm. The PNMA–LS composite spheres exhibit excellent silver‐ion adsorption; the maximum adsorption capacity of silver ions is up to 2.16 g g^?1 at an adsorption temperature of 308 K. TEM and wide‐angle X‐ray results of the PNMA–LS composite spheres after absorption of silver ions show that silver ions are reduced to silver nanoparticles with a mean diameter of about 11.2 nm through a redox reaction between the PNMA–LS composite and the silver ions. The main adsorption mechanism between the PNMA–LS composite and the silver ions is chelation and redox adsorption. In particular, a ternary PNMA–LS–Ag composite achieved by using the reducing reaction between PNMA–LS composite spheres and silver ions can be used as an antibacterial material with high bactericidal rate of 99.95 and 99.99 % for Escherichia coli and Staphylococcus aureus cells, respectively.     

Dialdehyde starch‐crosslinked chitosan films and their antimicrobial effects

For improved mechanical and water‐swelling properties of chitosan films, a series of transparent films were prepared with dialdehyde starch as a crosslinking agent. Fourier transform infrared and X‐ray analysis results demonstrated that the formation of Schiff's base disturbed the crystallization of chitosan. The mechanical properties and water‐swelling properties of the films were significantly improved. The best values of the tensile strength and breaking elongation were 113.1 MPa and 27.0%, respectively, when the dialdehyde starch content was 5%. All the crosslinked films still retained obvious antimicrobial effects toward S. aureus and E. coli, and they showed potential for biomedical applications. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 993–997, 2003     

Nature‐Inspired Bacterial Cellulose/Methylglyoxal (BC/MGO) Nanocomposite for Broad‐Spectrum Antimicrobial Wound Dressing

Bacterial cellulose (BC) is a natural material produced by Acetobacter xylinum, widely used in wound dressings due to the high water‐holding capacity and great mechanical strength. In this paper, a novel antimicrobial dressing made from BC/methylglyoxal (MGO) composite with a dip‐coating method inspired by naturally antimicrobial Manuka honey is proposed, which to our best knowledge, has not yet to be reported. Characterizations by scanning electron microscope and atomic force microscopy show the interconnected nanostructure of BC and MGO and increase surface roughness of the BC/MGO composite. Thermal analysis indicates high temperature stability of both BC and BC/MGO, while compared with BC, BC/MGO exhibits slightly weaker thermal stability possibly due to reduction of hydrogen bonding and increase of crystallinity. Mechanical test confirms the strong mechanical property of BC and BC/MGO nanocomposite. From the disk diffusion antimicrobial test, the BC/MGO nanocomposite with highest MGO concentration (4%) shows great zone inhibition diameter (around 14.3, 12.3, 17.1, and 15.5 mm against Micrococcus luteus, Pseudomonas aeruginosa, Staphylococcus aureus, and Escherichia coli). Compared with other antimicrobial wound dressing composite materials, the proposed BC/MGO nanocomposite has among the greatest antimicrobial property against broad‐spectrum bacteria, making it a promising antimicrobial dressing in chronic wounds care.     

Preparation,Characterization and Antimicrobial Properties of Nanosized Silver-Containing Carbon/Silica Composites from Rice Husk Waste

Rice husk, one of the main side products in the rice production, and its sustainable management represent a challenge in many countries. Herein, we describe the use of this abundant agricultural bio-waste as feedstock for the preparation of silver-containing carbon/silica nano composites with antimicrobial properties. The synthesis was performed using a fast and cheap methodology consisting of wet impregnation followed by pyrolysis, yielding C/SiO₂ composite materials doped with varying amounts of silver from 28 to 0.001 wt %. The materials were fully characterized and their antimicrobial activity against ESKAPE pathogens, namely E. faecium, S. aureus, K. pneumoniae, A. baumannii, P. aeruginosa, and E. coli, and the pathogenic yeast C. albicans was investigated. Sensitivities of these strains against the prepared materials were demonstrated, even with exceptional low amounts of 0.015 m% silver. Hence, we report a straightforward method for the synthesis of antimicrobial agents from abundant sources which addresses urgent questions like bio-waste valorization and affordable alternatives to increasingly fewer effective antibiotics.     

Antibacterial poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) fibrous membranes containing quaternary ammonium salts

In this study, antimicrobial membranes based on biodegradable material poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐4HB)] and quaternary ammonium salts (QASs) by two methods have been performed. Three QASs with varied alkyl chain lengths have been synthesized successfully and characterized by ¹H nuclear magnetic resonance and Fourier transform infrared. The synthesized QASs were blended with P(3HB‐4HB) and electrospun into composite fibrous membranes or casted into conventional membranes. Electrospun fibrous membranes with large surface areas are a superior type of antimicrobial biomaterials, and they exhibit preferable properties than solution casting membranes. Specifically, electrospun fibrous membranes are tougher and can inactivate both Gram‐positive Staphylococcus aureus and Gram‐negative Escherichia coli O157:H7 in a contact time of 30 min, whereas the solution casting membranes cannot. The length of alkyl chain in the quaternary ammonium groups on the modified P(3HB‐4HB) membranes is able to influence the antimicrobial activity. This type of antimicrobial material may have potential applications in biomaterial field. Copyright © 2016 John Wiley & Sons, Ltd.     

Novel Composite Plastics Containing Silver(I) Acylpyrazolonato Additives Display Potent Antimicrobial Activity by Contact

New silver(I) acylpyrazolonato derivatives displaying a mononuclear, polynuclear, or ionic nature, as a function of the ancillary azole ligands used in the synthesis, have been fully characterized by thermal analysis, solution NMR spectroscopy, solid‐state IR and NMR spectroscopies, and X‐ray diffraction techniques. These derivatives have been embedded in polyethylene (PE) matrix, and the antimicrobial activity of the composite materials has been tested against three bacterial strains (E. coli, P. aeruginosa, and S. aureus): Most of the composites show antimicrobial action comparable to PE embedded with AgNO₃. Tests by contact and release tests for specific migration of silver from PE composites clearly indicate that, at least in the case of the PE, for composites containing polynuclear silver(I) additives, the antimicrobial action is exerted by contact, without release of silver ions. Moreover, PE composites can be re‐used several times, displaying the same antimicrobial activity. Membrane permeabilization studies and induced reactive oxygen species (ROS) generation tests confirm the disorganization of bacterial cell membranes. The cytotoxic effect, evaluated in CD34⁺ cells by MTT (3‐(4,5‐dimethylthiazole‐2‐yl)‐2,5‐diphenyltetrazoliumbromide) and CFU (colony forming units) assays, indicates that the PE composites do not induce cytotoxicity in human cells. Studies of ecotoxicity, based on the test of Daphnia magna, confirm tolerability of the PE composites by higher organisms and exclude the release of Ag⁺ ions in sufficient amounts to affect water environment.     

The antimicrobial activity of the cotton fabric grafted with an amino-terminated hyperbranched polymer

An amino-terminated hyperbranched polymer (HBP-NH₂) was grafted to cotton fabric by a reaction between the aldehyde groups of oxidized cotton fabric and the amino groups of the HBP-NH₂ to provide cotton fabric with durable antimicrobial properties. The antimicrobial activities of the HBP-NH₂ aqueous solutions and the HBP-NH₂ grafted cotton fabrics were evaluated quantitatively against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The results indicated that the HBP-NH₂ grafted cotton fabric showed 92% of bacterial reduction to S. aureus and 95% of bacterial reduction to E. coli, respectively. The antimicrobial activities of the HBP-NH₂ grafted cotton fabrics were maintained at over 91% reduction level even after being exposed to 20 consecutive home laundering conditions. Several influence factors, which may affect the amount of HBP-NH₂ grafted onto the cotton fabrics, were also discussed.     

Telechelic,Antimicrobial Hydrophilic Polycations with Two Modes of Action

Telechelic antimicrobial poly(2‐oxazoline)s with quaternary ammonium (quat) end groups are shown to be potent antimicrobial polymers against Gram‐positive bacterial strains. In this study, the activity against the Gram‐negative bacterium Escherichia coli is additionally implemented by hydrolyzing the poly(2‐methyl‐2‐oxazoline) with two quart end groups to poly(ethylene imine) (PEI). The resulting telechelic polycations are active against Staphylococcus aureus and E. coli. The contribution of the PEI backbone is determined by measuring the antimicrobial activity in the presence of calcium ions. The influence of PEI on the overall activity strongly depends on the molecular weight and increases with higher mass. The PEI dominates the activity against E. coli at lower masses than against S. aureus. The quart end groups require an alkyl substituent of dodecyl or longer to dominate the antimicrobial activity. Additionally, PEI and quart end groups act synergistically.     

“Doubly Selective” Antimicrobial Polymers: How Do They Differentiate between Bacteria?

We have investigated how doubly selective synthetic mimics of antimicrobial peptides (SMAMPs), which can differentiate not only between bacteria and mammalian cells, but also between Gram‐negative and Gram‐positive bacteria, make the latter distinction. By dye‐leakage experiments on model vesicles and complementary experiments on bacteria, we were able to relate the Gram selectivity to structural differences of these bacteria types. We showed that the double membrane of E. coli rather than the difference in lipid composition between E. coli and S. aureus was responsible for Gram selectivity. The molecular‐weight‐dependent antimicrobial activity of the SMAMPs was shown to be a sieving effect: while the 3000 g mol^?1 SMAMP was able to penetrate the peptidoglycan layer of the Gram‐positive S. aureus bacteria, the 50000 g mol^?1 SMAMP got stuck and consequently did not have antimicrobial activity.     

Spectral Characterization and Antimicrobial Activity of Some Schiff Bases Derived from 4‐Chloro‐2‐aminophenol and Various Salicylaldehyde Derivatives

A series of N‐(5‐chloro‐2‐hydroxyphenyl)‐(3/4/5‐substituted)‐salicylaldimines ( I – XI ) were synthesized using appropriate synthetic route. Their structures were characterized by FT‐IR, UV‐Visible, ESI‐MS, ¹H and ¹³C NMR spectroscopic techniques and analytical methods. The crystal structure of N‐(5‐chloro‐2‐hydroxyphenyl)‐5‐bromosalicylaldimine ( V ) was determined by X‐ray diffraction at room temperature. Relationship between the melting points and the structures of the compounds was examined. Antimicrobial activity of the compounds was evaluated against Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa, Proteus mirabilis. Antifungal activities were reported for Candida albicans. Schiff bases showed considerable antimicrobial activity against S. aureus, S. epidermidis and C. albicans. N‐(5‐Chloro‐2‐hydroxyphenyl)‐3‐hydroxy‐salicylaldimine ( II ) has the broadest and highest antimicrobial activity according to the others.     

Dual‐Functional Dextran‐PEG Hydrogel as an Antimicrobial Biomedical Material

Microbial infections continually present a major worldwide public healthcare threat, particularly in instances of impaired wound healing and biomedical implant fouling. The development of new materials with the desired antimicrobial property to avoid and treat wound infection is urgently needed in wound care management. This study reports a novel dual‐functional biodegradable dextran‐poly(ethylene glycol) (PEG) hydrogel covalently conjugated with antibacterial Polymyxin B and Vancomycin (Vanco). The hydrogel is designed as a specialized wound dressing that eradicates existing bacteria and inhibits further bacteria growth, while, ameliorating the side effects of antibiotics and accelerating tissue repair and regeneration. The hydrogel exhibits potent antibacterial activities against both gram‐negative bacteria Escherichia coli (E. coli) and gram‐positive bacteria Staphylococcus aureus (S. aureus) with no observable toxicity to mouse fibroblast cell line NIH 3T3. These results demonstrate the immense potential of dextran‐PEG hydrogel as a wound dressing healthcare material in efficiently controlling bacteria growth in complex biological systems.     

A surfactant‐free synthesis of the silica nanosphere‐supported ultrafine silver nanoparticles and their antibacterial effects

In this study, a facile, efficient, and surfactant‐free method to synthesize silica nanosphere‐supported ultrafine silver nanoparticles (AgNPs) (~2.5 nm) was developed, and their antibacterial effects were investigated. In the synthesis process, the hydrolysis of 3‐mercaptopropyltrimethoxysilane was adopted to provide thiol groups and in situ reduce Ag⁺ to Ag⁰ for ultrafine AgNPs formation on the surface of the silica nanosphere. Electron microscopy characterization of the complex formed revealed that the ultrafine AgNPs were not agglomerated and grow without any surfactants because there were no excess electrons transported from the shell to reduce the silver ions to silver atoms. The antibacterial effects of the supported ultrafine AgNPs with the surfactant‐free surface were evaluated against the Escherichia coli even at very low dosage. After incubation with 20 μg/mL silica‐supported AgNPs up to 120 min, 99.7% of the E. coli were inactivated, according to the bacterial viability measured by flow cytometry.     

Synthesis and antibacterial activity of versatile substrate‐coated biocidal material via catechol chemistry

We report a potential coating material showing durable and significant antimicrobial activity for preserving the surfaces of a broad range of materials. The structure of the prepared antimicrobial adhesive material features a catechol moiety of dopamine hydrochloride conjugated to 4‐bromobutanoyl chloride as an adhesive material. Antimicrobial properties against a wide range of microorganism species are achieved by quaternizing a long hydrophobic chain (N,N'‐dimethyldecylamine) onto 3,4‐dihydroxyphenylalanine (Dopa) to afford the prepared material (Dopa‐decyl). The successful formation of Dopa‐decyl is confirmed by hydrogen nuclear magnetic resonance (¹H‐NMR) and attenuated total reflectance‐infrared (ATR‐IR) measurements. The chemical composition of the quaternized adhesive material (Dopa‐decyl) is characterized by X‐ray photoelectron spectroscopy (XPS). Investigation of the antimicrobial activity of the Dopa‐decyl‐coated film against both gram‐positive Staphylococcus aureus (S. aureus) and gram‐negative Escherichia coli (E. coli) stains reveals a highly efficient antimicrobial effect under both normal and extreme stress conditions due to the biocidal effect of the quaternized amine when the materials are applied on the surface of various substrates. Copyright © 2014 John Wiley & Sons, Ltd.     

Triclosan‐based antibacterial paper reinforced with nano‐montmorillonite: a model nanocomposite for the development of new active packaging

In this study, a suitable method is reported to produce reinforced antibacterial paper packaging using the antimicrobial triclosan (TC) and organically modified montmorillonite (OMMT) as “model” compounds. Direct incorporation of TC at a concentration of 1 wt% and OMMT at concentrations of 1, 4, 7, and 10 wt% into papers was performed via coating process, and the resulting materials were characterized by in vitro antimicrobial assays, thermogravimetric analysis, scanning electron microscopy, mechanical tests, and water vapor transmission rate determinations. It was demonstrated that the presence of 1% TC in the coated papers exhibited inhibitory effects against Staphylococcus aureus and Escherichia coli. It was also pointed out that increases of approximately 30% in the tensile strength of commercial paper are obtained by using the OMMT at a concentration of 1 wt%. Water barrier property and thermal stability of paper were also enhanced because of the coating process and the incorporation of OMMT. The results from this study demonstrate that OMMT has a great potential to be incorporated into coating formulations to obtain antibacterial‐coated papers with improved properties for various packaging applications. Copyright © 2011 John Wiley & Sons, Ltd.     

N‐Phenyl‐substituted carbene precursors and their silver complexes: synthesis,characterization and antimicrobial activities

A series of unsymmetrically substituted N‐heterocyclic carbene (NHC) precursors ( 1a , 1b , 1c , 1d , 1e ) were synthesized from the reaction of N‐phenylbenzimidazole with various alkyl halides. These compounds were used to synthesize NHC–silver(I) complexes ( 2a , 2b , 2c , 2d , 2e ). The five new 1‐phenyl‐3‐alkylbenzimidazolium salts ( 1a , 1b , 1c , 1d , 1e ) and their NHC–silver complexes ( 2a , 2b , 2c , 2d , 2e ) were characterized by the ¹H NMR, ¹³C NMR and FT‐IR spectroscopic methods and elemental analysis techniques. Also, the two NHC–silver complexes 2b and 2c were characterized by single‐crystal X‐ray crystallography, which confirmed the linear C―Ag―Cl arrangements. The antibacterial activities of the NHC precursor and NHC–silver complexes were tested against three Gram‐positive bacterial strains (Bacillus subtilis, Listeria monocytogenes and Staphylococcus aureus) and three Gram‐negative bacterial strains (Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa) using the microdilution broth method. The NHC–silver complexes showed higher antibacterial activity than the NHC precursors. In addition, silver complexes 2a , 2b , 2c , 2d showed high antibacterial activity against the Gram‐positive bacteria L. monocytogenes and S. aureus compared to the standard, tetracycline. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and properties of some 2,3‐disubstituted 6‐fluoro‐7‐(4‐methyl‐1‐piperazinyl)quinoxalines

The 2,3‐disubstituted 6‐fluoro‐7‐(4‐methyl‐1‐piperazinyl)‐quinoxalines ( 3–11 ) were synthesized for bioassay via reaction of 1.2‐diamino‐4‐fluoro‐5‐(4‐methyl‐1‐piperazinyl)benzene (2) with the appropriate 1,2‐dicarbonyl compounds. However, none of the tested compounds 3–11 showed significant in vitro activ ity against E. coli ATCC11229, S. aureus ATCC6538 and C.albicans SATCC10231.     

Porphyrin‐based,light‐activated antimicrobial materials

New light‐activated antimicrobial materials with a potentially wide range of possible uses in civilian settings were synthesized by the grafting of protoporphyrin IX and zinc protoporphyrin IX to nylon fibers. These fibers were shown to be active against Staphylococcus aureus at light exposures of 10,000 lux and greater and against Escherichia coli at 60,000 lux. They were ineffective against both strains in the absence of light. At 40,000 lux, these fibers showed increased antimicrobial activity against S. aureus with increasing exposure time. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2297–2303, 2003     

Synthesis and Antibacterial Activity of 3‐(Substituted arylmethyl)‐4‐acylaminomethyloxazolidin‐2‐ones and Derivatization to Symmetrical Twin‐Drug Type Molecules

In connection with our studies on antibacterial active compounds in the class of new oxazolidinones against Gram‐positive (Staphylococcus aureus) and Gram‐negative (Escherichia coli) strains, some molecular modifications were attempted. In this study, molecular modifications of 4‐aminomethyloxazolidin‐2‐ones ( 3a ) to the corresponding 4‐acylaminomethyloxazolidin‐2‐one derivatives ( 3c–d ) and preparations of the represented twin‐drug type molecules ( 10–14 ) were investigated. Some additional 4‐dialkylaminomethyloxazolidin‐2‐ones ( 2 ) were also synthesized. The synthesized compounds were evaluated for antibacterial activity with Gram‐positive (S. aureus) and Gram‐negative (E. coli) strains.     

The preparation and characterization of silver‐loading cellulose acetate hollow fiber membrane for water treatment

Silver‐loading asymmetric cellulose acetate (CA) hollow fiber membrane was spun via the dry jet‐wet spinning technique. The spinning solution was prepared by dissolving AgNO₃ and CA in N,N‐dimethylformamide (DMF). The silver ions were reduced in the spinning dope into silver nano‐particles. The morphology of the resulting hollow fibers was examined using a scanning electron microscope and the silver content in the fiber was measured using an inductively coupled plasma atomic emission spectrometer. The antibacterial activities were evaluated. These hollow fibers had a sponge‐like structure and dense inner and outer surfaces. At a 50 k magnification, the pore on the skin layer was not observable, while the nodule size was smaller than 10 nm. The residual silver content of as‐spun hollow fiber was about 60% of the original silver added in the polymer solution. After immersing in water bath for 180 days, the silver content in the bulk of the hollow fibers decreased to 60% and the silver content on the surface reduced to 10%, yet still showed antibacterial activity against Escherichia coli and Staphylococcus aureus. After permeating with water for 5 days, the silver content in the hollow fibers decreased, and did not show antibacterial activity against E. coli and S. aureus. Thus, silver content must be periodically replenished after permeation. The proper range of AgNO₃ in the spinning solution for CA hollow fiber should be about 100–1000 ppm. Copyright © 2005 John Wiley & Sons, Ltd.