Novel diblock copolymer‐grafted multiwalled carbon nanotubes via a combination of living and controlled/living surface polymerizations

Diels–Alder cycloaddition reactions were used to functionalize multiwalled carbon nanotubes (MWNTs) with 1‐benzocylcobutene‐1′‐phenylethylene (BCB‐PE) or 4‐hydroxyethylbenzocyclobutene (BCB‐EO). The covalent functionalization of the nanotubes with these initiator precursors was verified by FTIR and thermogravimetric analysis (TGA). After appropriate transformations/additions, the functionalized MWNTs were used for surface initiated anionic and ring opening polymerizations of ethylene oxide and ε‐caprolactone (ε‐CL), respectively. The OH‐end groups were transformed to isopropylbromide groups by reaction with 2‐bromoisobutyryl bromide, for subsequent atom transfer radical polymerization of styrene or 2‐dimethylaminoethyl methacrylate to afford the final diblock copolymers. ¹H NMR, differential scanning calorimetry (DSC), TGA, and transmission electron microscopy (TEM) were used for the characterization of the nanocomposite materials. TEM images showed the presence of a polymer layer around the MWNTs as well as the dissociation of MWNT bundles. Consequently, this general methodology, employing combinations of different polymerization techniques, increases the diversity of diblocks that can be grafted from MWNTs. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1104–1112, 2010     

Living free‐radical polymerization (reversible addition–fragmentation chain transfer) of 6‐[4‐(4′‐methoxyphenyl)phenoxy]hexyl methacrylate: A route to architectural control of side‐chain liquid‐crystalline polymers

Side‐chain liquid‐crystalline polymers of 6‐[4‐(4′‐methoxyphenyl)phenoxy]hexyl methacrylate with controlled molecular weights and narrow polydispersities were prepared via reversible addition–fragmentation chain transfer (RAFT) polymerization with 2‐(2‐cyanopropyl) dithiobenzoate as the RAFT agent. Differential scanning calorimetry studies showed that the polymers produced via the RAFT process had a narrower thermal stability range of the liquid‐crystalline mesophase than the polymers formed via conventional free‐radical polymerization. In addition, a chain length dependence of this stability range was found. The generated RAFT polymers displayed optical textures similar to those of polymers produced via conventional free‐radical polymerization. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2949–2963, 2003     

Synthesis of aromatic oxazolyl‐ and carboxyl‐functionalized polymers: Atom transfer radical polymerization of styrene initiated by 2‐[(4‐bromomethyl)phenyl]‐4,5‐dihydro‐4,4‐dimethyloxazole

The synthesis of a new compound, 2‐[(4‐bromomethyl)phenyl]‐4,5‐dihydro‐4,4‐dimethyloxazole ( 1 ), and its utility in the synthesis of oxazoline‐functionalized polystyrene by atom transfer radical polymerization (ATRP) methods are described. Aromatic oxazolyl‐functionalized polymers were prepared by the ATRP of styrene, initiated by ( 1 ) in the presence of copper(I) bromide/2,2′‐bipyridyl catalyst system, to afford the corresponding α‐oxazolyl‐functionalized polystyrene ( 2 ). The polymerization proceeded via a controlled free radical polymerization process to produce the corresponding α‐oxazolyl‐functionalized polymers with predictable number‐average molecular weights, narrow molecular weight distributions in high‐initiator efficiency reactions. Post‐ATRP chain end modification of α‐oxazolyl‐functionalized polystyrene ( 2 ) to form the corresponding α‐carboxyl‐functionalized polystyrene ( 3 ) was achieved by successive acid‐catalyzed hydrolysis and saponification reactions. The polymerization processes were monitored by gas chromatography analyses. The unimolecular‐functionalized initiator and functionalized polymers were characterized by thin layer chromatography, spectroscopy, size exclusion chromatography, and nonaqueous titration analysis. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis and characterization of photosensitive benzocyclobutene‐functionalized siloxane thermosets

Two methylphenylsiloxane monomers with crosslinkable benzocyclobutene functionalities at the terminal positions, 1,1,5,5‐dimethyldiphenyl‐1,1,5,5‐di[2′‐(4′‐benzocyclobutenyl)vinyl]‐3,3‐diphenyltrisiloxane (BCB‐1) and 1,1,3,3‐dimethyl‐diphenyl‐1,1,3,3‐di[2′‐(4′‐benzocyclobutenyl)vinyl]disiloxane (BCB‐2) were prepared and characterized. By heating the solution of BCB‐1 and BCB‐2 in mesitylene, two partially polymerized resins of BCB‐1B and BCB‐2B with high molecular weight were also achieved. The monomers and their oligomers fully cured at temperatures above 250 °C. Cured BCB‐1 and BCB‐2 exhibited high T_g (257 and 383 °C) and good thermal stability (T_5% > 472 °C both in N₂ and in air). They also demonstrated low dielectric constants (2.69 and 2.66), low dissipation factors (2.36 and 2.23), and low water absorptions (0.20% and 0.17%). Moreover, a negative photosensitive formulation derived from BCB‐1B in combination with 2,6‐bis(4‐azidobenzylidene)‐4‐methylcyclohexanone (BAC‐M) as a photosensitive agent has been developed. The photosensitive composition, BCB‐1B containing 5 wt % BAC‐M, showed a sensitivity of 550 mJ/cm² and a contrast of 1.96 when it was exposed to a 365 nm light (i‐line) and developed with cyclohexanone at 25 °C. A fine negative image of 10 μm line‐and‐space pattern was also printed in a film which was exposed to 700 mJ/cm² of i‐line by contact‐printing mode. The negative image can be maintained without any pattern deformation in the curing process. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6246–6258, 2009     

A photo‐degradable helix: Synthesis,structure, and photolysis of optically active poly[2,7‐bis(4‐t‐butylphenyl)‐9‐methylfluoren‐9‐yl acrylate]

2,7‐Bis(4‐t‐butylphenyl)‐9‐methylfluoren‐9‐yl acrylate ( BBPMFA ) was synthesized and polymerized using α,α′‐azobisisobutyronitrile or n‐Bu₃B‐air as a radical initiator and using the complex of 9‐fluorenyllithium with (S)‐(+)‐1‐(2‐pyrrolidinylmethyl)pyrrolidine as an optically active anionic initiator. Although the radical polymerization led to rather low‐molecular‐weight products at low yields, the anionic polymerization afforded polymers with higher molecular weights in higher yields. The poly( BBPMFA ) obtained by the anionic polymerization was slightly rich in isotacticity (meso diad 57%) and showed an intense circular dichroism (CD) spectrum and large dextrorotation. The intensity of the CD spectrum and magnitude of optical activity increased with an increase in M_n, suggesting that the polymer possesses a preferred‐handed helical conformation. The CD spectrum disappeared within 1 s on irradiation to the polymer in a CHCl₃ solution using a 500‐W Hg‐Xe lamp. This was ascribed to fast photolysis of the ester linkage leading to a loss of helical conformation of the entire chain. Photolysis products of poly( BBPMFA ) were poly(acrylic acid) and 2,7‐bis(4‐t‐butylphenyl)‐9‐methylenefluorene (2,7‐bis(4‐t‐butylphenyl)dibenzofulvene). The photolysis reaction seemed to proceed through the “unzipping” mechanism. The rate constant of photolysis of poly( BBPMFA ) under irradiation at monochromated 325 nm was around 0.01 s^?1 independent of molecular weight. Photolysis at 325 nm was approximately 2400 times faster than that for chemical ester solvolysis under a neutral condition in the dark. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of a novel block copolymer poly(ethylene oxide)‐block‐poly(4‐vinylpyridine) by combination of anionic ring‐opening and controllable free‐radical polymerization

The block copolymer poly(ethylene oxide)‐b‐poly(4‐vinylpyridine) was synthesized by a combination of living anionic ring‐opening polymerization and a controllable radical mechanism. The poly(ethylene oxide) prepolymer with the 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy end group (PEO_T) was first obtained by anionic ring‐opening polymerization of ethylene oxide with sodium 4‐oxy‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy as the initiator in a homogeneous process. In the polymerization UV and electron spin resonance spectroscopy determined the 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy moiety was left intact. The copolymers were then obtained by radical polymerization of 4‐vinylpyridine in the presence of PEO_T. The polymerization showed a controllable radical mechanism. The desired block copolymers were characterized by gel permeation chromatography, Fourier transform infrared, and NMR spectroscopy in detail. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4404–4409, 2002     

R‐RAFT approach for the polymerization of N‐isopropylacrylamide with a star poly(ε‐caprolactone) core

Reversible addition‐fragmentation chain transfer (RAFT) polymerization is a more robust and versatile approach than other living free radical polymerization methods, providing a reactive thiocarbonylthio end group. A series of well‐defined star diblock [poly(ε‐caprolactone)‐b‐poly(N‐isopropylacrylamide)]₄ (SPCLNIP) copolymers were synthesized by R‐RAFT polymerization of N‐isopropylacrylamide (NIPAAm) using [PCL‐DDAT]₄ (SPCL‐DDAT) as a star macro‐RAFT agent (DDAT: S‐1‐dodecyl‐S′‐(α, α′‐dimethyl‐α″‐acetic acid) trithiocarbonate). The R‐RAFT polymerization showed a controlled/“living” character, proceeding with pseudo‐first‐order kinetics. All these star polymers with different molecular weights exhibited narrow molecular weight distributions of less than 1.2. The effect of polymerization temperature and molecular weight of the star macro‐RAFT agent on the polymerization kinetics of NIPAAm monomers was also addressed. Hardly any radical–radical coupling by‐products were detected, while linear side products were kept to a minimum by careful control over polymerization conditions. The trithiocarbonate groups were transferred to polymer chain ends by R‐RAFT polymerization, providing potential possibility of further modification by thiocarbonylthio chemistry. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Anionic polymerization of 4‐phenyl‐1‐buten‐3‐yne derivatives bearing electron‐withdrawing groups

The anionic polymerization of derivatives of 4‐phenyl‐1‐buten‐3‐yne was carried out to investigate the effect of substituents on the polymerization behavior. The polymerization of 4‐(4‐fluorophenyl)‐1‐buten‐3‐yne and 4‐(2‐fluorophenyl)‐1‐buten‐3‐yne in tetrahydrofuran at −78 °C with n‐BuLi/sparteine as an initiator gave polymers consisting of 1,2‐ and 1,4‐polymerized units in quantitative yields with ratios of 80/20 and 88/12, respectively. The molecular weights of the polymers were controlled by the ratio of the monomers to n‐BuLi, and the distribution was relatively narrow (weight‐average molecular weight/number‐average molecular weight < 1.2), supporting the living nature of the polymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1016–1023, 2001     

Synthesis and characterization of liquid crystalline side‐chain block copolymers containing luminescent 4,4′‐bis(biphenyl)fluorene pendants

A series of new liquid crystalline homopolymers, copolymers, and block copolymers were polymerized from styrene‐macroinitiator ( SMi ) and methacrylates with pendent 4,4′‐bis(biphenyl)fluorene ( M1 ) and biphenyl‐4‐ylfluorene ( M2 ) groups through atom transfer radical polymerization (ATRP). The number‐average molecular weights (Mn) of polymers P1 ‐ P4 were 10,007, 14,852, 6,275, and 10,463 g mol^?1 with polydispersity indices values of 1.21, 1.15, 1.31, and 1.22, respectively. All polymers exhibit the nematic phase. The thermal, mesogenic, and photoluminescent properties of all polymers were investigated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4564–4572, 2007     

Synthesis of well‐defined second‐generation dendritic polymers of isoprene (I) and styrene (S): (S2I)3, (SI′I)3, (I″I′I)3, and (I′2I)4

The synthesis of second‐generation (G‐2) dendritic polymers of isoprene (I) and styrene (S) was achieved with anionic polymerization high‐vacuum techniques and by performing the following steps: (1) selective reaction of a living chain with the chlorosilane group of 4‐(chlorodimethylsilyl)styrene (a dual‐functionality compound) to produce a macromonomer, (2) addition of a second living chain (same or different) to the double bond of the macromonomer, (3) polymerization of I with the anionic sites, and (4) reaction of the produced off‐center living species with trichloromethyl silane or tetrachlorosilane (CH₃SiCl₃ or SiCl₄). The combined characterization results showed that the G‐2 dendritic macromolecules synthesized—(S₂I)₃, (SI′I)₃, (I″I′I)₃, (I′₂I)₄—have a high molecular and compositional homogeneity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1519–1526, 2002     

Synthesis of nitroxide‐containing block copolymers for the formation of organic cathodes

This contribution describes the polymerization of 2,2,6,6‐tetramethylpiperidin‐4‐yl methacrylate by atom transfer radical polymerization (ATRP). Different catalytic systems are compared. The CuCl/4,4′‐dinonyl‐2,2′‐dipyridyl catalytic system allows a good control over the polymerization and provides polymers with a polydispersity index below 1.2. The successful polymerization of styrene from PTMPM‐Cl macroinitiators by ATRP is then demonstrated. Successful quantitative oxidation of PTMPM‐b‐PS block copolymers leads to poly(2,2,6,6‐tetramethylpiperidinyloxy‐4‐yl‐methacrylate)‐b‐poly(styrene) (PTMA‐b‐PS). The cyclic voltammogram of PTMA‐b‐PS indicates a reversible redox reaction at 3.6 V (vs. Li⁺/Li). Such block copolymers open new opportunities for the formation of functional organic cathode materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Direct through anionic,cationic, and radical active species: Terminal carbon–halogen bond for “controlled”/living polymerizations of styrene

In this work, we examined the synthesis of novel block (co)polymers by mechanistic transformation through anionic, cationic, and radical living polymerizations using terminal carbon–halogen bond as the dormant species. First, the direct halogenation of growing species in the living anionic polymerization of styrene was examined with CCl₄ to form a carbon–halogen terminal, which can be employed as the dormant species for either living cationic or radical polymerization. The mechanistic transformation was then performed from living anionic polymerization into living cationic or radical polymerization using the obtained polymers as the macroinitiator with the SnCl₄/n‐Bu₄NCl or RuCp^*Cl(PPh₃)/Et₃N initiating system, respectively. Finally, the combination of all the polymerizations allowed the synthesis block copolymers including unprecedented gradient block copolymers composed of styrene and p‐methylstyrene. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 465–473     

Anionic synthesis and detection of fluorescence‐labeled polymers with a terminal anhydride group

To monitor polymer–polymer coupling reactions between two different monofunctional polymers in dilute polymer blends, fluorescence‐labeled anhydride‐functional polystyrene (PS) and poly(methyl methacrylate) (PMMA) were prepared by conventional anionic polymerization. Sequential trapping of lithiopolystyrene by 1‐(2‐anthryl)‐1‐phenylethylene (APE) and then di‐t‐butyl maleate (4) provided, after pyrolysis, anhydride‐functional fluorescent PS. Fluorescent PMMA anhydride (8) was synthesized with sec‐butyllithium/APE as an initiator for the anionic polymerization of methyl methacrylate, trapping by 4, and pyrolysis. These polymers could be reacted with amine‐functional polymers by melt blending, and the reaction progress could be monitored by gel permeation chromatography coupled with fluorescence detection. This technique not only allows monitoring of the coupling reaction with high sensitivity (ca. 100 times more sensitive than refractive index detection) but also permits selective detection because unlabeled polymers are invisible to fluorescence detection. This highly sensitive and selective detection methodology was also used to monitor the coupling reaction of 8 with PS‐NH₂ at a thin‐film interface, which was otherwise difficult to detect by conventional methods. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2177–2185, 2000     

Synthesis of comb‐branched polyacrylamide with cationic poly[(2‐dimethylamino)ethyl methacrylate dimethylsulfate] quat

Comb‐branched polyelectrolytes with polyacrylamide backbones and poly[(2‐dimethylamino)ethyl methacrylate methylsulfate] (polyDMAEMA‐DMS) side chains were prepared by free‐radical macromonomer polymerization. PolyDMAEMA‐DMS macromonomers bearing terminal styrenic moieties were synthesized by living anionic polymerization with lithium 4‐vinylbenzylamide (LiVBA) and lithium N‐isopropyl‐4‐vinylbenzylamide (LiPVBA) as initiators. In the presence of LiCl, LiPVBA initiated a living polymerization of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and produced polymers with well‐controlled molecular weights and low polydispersities. LiVBA could not directly initiate DMAEMA polymerization. After being capped with two units of dimethylacrylamide, DMAEMA polymerized with an initiator efficiency of 63%. The quaternization of the poly[(2‐dimethylamino)ethyl methacrylate] macromonomer with dimethyl sulfate yielded the cationic polyDMAEMA‐DMS macromonomer. The polyDMAEMA‐DMS macromonomer had a much higher reactivity than acrylamide in free‐radical polymerization. This might have been due to the formation of polyDMAEMA‐DMS micelles in the polymerization system. The high macromonomer reactivity caused composition drift in a batch process. A semibatch method with a constant polyDMAEMA‐DMS feed rate was used to control the copolymer composition. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2394–2405, 2002     

Polymers derived from N‐isopropylacrylamide and azobenzene‐containing acrylamides: Photoresponsive affinity to water

N‐Isopropylacryamide was copolymerized by free‐radical polymerization with N‐[2‐(4‐phenylazophenoxy)ethyl]acrylamide derivatives that were substituted at their 4′‐position with ethoxy, methoxyethoxy, or isopropyl units, or with N‐{2‐[4‐(pyridin‐2‐ylazo)phenoxy]ethyl}acrylamide. The polymers were soluble in cold water and possessed lower critical solution temperatures (LCSTs). The value of the LCST rose a few degrees after UV irradiation and dropped after irradiation with visible light, reversibly, in processes that corresponded to the isomerization of the azobenzene units. The polymers became increasingly hydrophobic after increasing their azobenzene content. The difference of hydrophobicity correlates with the absorption band height at about 400 nm. The structure of the substituent on the azobenzene unit affected both the transition temperature and the hydrophobicity. A change in photoinduced wettability for water was observed to occur on a prepared film at a temperature different from the LCST determined in water. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5200–5214, 2004     

New polyphenylene‐g‐polystyrene and polyphenylene‐g‐polystyrene/poly(ε‐caprolactone) copolymers by combined controlled polymerization and cross‐coupling processes

1,4‐Dibromo‐2‐(bromomethyl)benzene and 1,3‐dibromo‐5‐(bromomethyl)benzene were used as initiators in the atom transfer radical polymerization of styrene in conjunction with CuBr/2,2′‐bipyridine as a catalyst. The resulting polystyrene (PSt)‐based macromonomers, possessing at one end a 2,5‐dibromophenylene or 3,5‐dibromophenylene moiety, were used in combination with 2,5‐dihexylbenzene‐1,4‐diboronic acid for Suzuki coupling in the presence of Pd(PPh₃)₄ as a catalyst or with the system NiCl₂/2,2′‐bipyridine/triphenylphosphine/Zn for Yamamoto polymerization. Polyphenylenes (PPs) with PSt chains as substitution groups were obtained. The same macromonomers were used in Yamamoto copolycondensation reactions, in combination with a poly(ε‐caprolactone) (PCL) macromonomer, and this resulted in PPs with PSt/PCL side chains. The obtained PPs had good solubility properties in common organic solvents at room temperature similar to those of the starting macromonomers. The new polymers were characterized with ¹H (¹³C) NMR, IR, and gel permeation chromatography. The optical properties of the polymers were monitored with UV and fluorescence spectroscopy. The thermal behaviors of the macromonomers and final PPs were investigated with differential scanning calorimetry and compared. The morphology of PPs containing PSt and PCL blocks was characterized with atomic force microscopy, and a microphase‐separated layered morphology was observed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 879–896, 2005     

Preparation and photoinduced isomerization study of a homopolymer and a copolymer based on 4′‐(6‐acryloxy)hexyloxy‐4‐methoxyazobenzene and acrylic acid

The synthesis and characterization of a copolymer based on 4′‐(6‐acryloxy)hexyloxy‐4‐methoxyazobenzene (MAB6) and acrylic acid (AA) are reported. A reaction was carried out by free‐radical polymerization, yielding an MAB6 homopolymer and an AA–MAB6 copolymer with an MAB6 concentration of 16–80%. A nematic phase was observed in the copolymer when the MAB6 content was 44% or higher. Both nematic and smectic phases were observed in the MAB6 homopolymer. All of the polymers were investigated for trans–cis–trans isomerization in a solid film. The samples were irradiated with nonpolarized ultraviolet light (385 nm) before absorption measurements were taken with an ultraviolet–visible spectrometer. The copolymer and homopolymer exhibited a thermal cis–trans isomerization, which could be described by a double‐exponential relaxation process (fast and slow). The relaxation experiment suggested that the hydrogen bonding may have hindered the slow process but had no effect on the fast process. A film of a copolymer sample with a high MAB6 content could be optically aligned by the exposure of the sample to polarized light (385 nm). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 4017–4024, 2003     

Synthesis of graft copolymers with “V‐shaped” and “Y‐shaped” side chains via controlled radical and anionic polymerizations

A combination of nitroxide‐mediated radical polymerization and living anionic polymerization was used to synthesize a series of well‐defined graft (co)polymers with “V‐shaped” and “Y‐shaped” branches. The polymer main chain is a copolymer of styrene and p‐chloromethylstyrene (PS‐co‐PCMS) prepared via nitroxide‐mediated radical polymerization. The V‐shaped branches were prepared through coupling reaction of polystyrene macromonomer, carrying 1,1‐diphenylethylene terminus, with polystyryllithium or polyisoprenyllithium. The Y‐shaped branches were prepared throughfurther polymerization initiated by the V‐shaped anions. The obtained branches, carrying a living anion at the middle (V‐shaped) or at the end of the third segment (Y‐shaped), were coupled in situ with pendent benzyl chloride of PS‐co‐PCMS to form the target graft (co)polymers. The purified graft (co)polymers were analyzed by size exclusion chromatography equipped with a multiangle light scattering detector and a viscometer. The result shows that the viscosities and radii of gyration of the branched polymers are remarkably smaller than those of linear polystyrene. In addition, V‐shaped product adopts a more compact conformation in dilute solution than the Y‐shaped analogy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4013–4025, 2007     

A copper‐based reverse atom‐transfer radical polymerization process for the living radical polymerization of polyacrylonitrile

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living radical polymerization of acrylonitrile (AN). A hexasubstituted ethane thermal iniferter, diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS), was firstly used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 57.4 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 226–231, 2006     

Synthesis of asymmetrically substituted head‐to‐head polyacetylenes from 2,3‐disubstituted‐1,3‐butadienes

Asymmetrically substituted head‐to‐head polyacetylenes with phenyl and triphenylamine, thienyl or pyrenyl side groups were synthesized through anionic or controlled radical polymerization of 2,3‐disubstituted‐1,3‐butadienes and subsequent dehydrogenation process. Anionic polymerizations of the designed monomers bearing pendent triphenylamine and thienyl group gave narrow disperse disubstituted precursor polybutadienes with exclusive 1,4‐ or 4,1‐structure, which were confirmed by GPC and NMR measurements. In addition, the monomers possessing pyrenyl group were polymerized via nitroxide mediated radical polymerization and the resulting polymers were obtained with controlled molecular weight and low polydispersities. These polybutadiene precursors were then dehydrogenated in the presence of 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone. Thus asymmetrically substituted head‐to‐head polyacetylenes were obtained as indicated by ¹H NMR. The properties of polybutadiene precursors and the corresponding polyacetylenes were analyzed by UV–vis, DSC, and TGA. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 395–402