Radical addition‐coupling polymerization with various nitroso compounds

Four nitroso esters were prepared by oxidation of 4,4‐dimethyl dihydro‐1,3‐oxazine or 4,4‐dimethyl‐2‐oxazoline with two equiv of m‐chloroperoxybenzoic acid. All of them can be applied in radical addition‐coupling polymerization to produce periodic polymer together with introduction of ester group at side chain. Compared with 2‐methyl‐2‐nitrosopropane, 2‐nitroso‐2‐methyl‐4‐acetoxypentane and 2‐methyl‐2‐nitrosopropyl hexanoate present good stability at high temperature up to 70 °C and can result polymer with high molecular weight. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 810–815     

A novel polymerization approach via thiol‐yne addition

The ability of thiyl radicals to add to terminal unsaturations in an efficient way made them considered being one of the click reactions. Recently, thiol‐yne addition reactions have been used extensively for the synthesis of crosslinked networks and dendrimers and postpolymerization functionalization protocols. Herein, we report a novel step‐growth type reaction for highly functional linear polymers using a monoalkyne and dithiol compound. First, we investigated the model reaction between 1‐octyne and 1‐octanethiol as well as 1,4‐butanedithiol compounds, which were initiated via self‐, thermal‐, and UV‐initiation; the UV‐initiation was found to be the most efficient method and completed within 2‐h reaction time. The same conditions were applied for the polymerization of four different functional alkynes bearing different functional groups with two dithiol compounds. All polymerizations resulted in highly functional linear polymers with number averaged molecular weights ranging from 5 to 30 kDa, except for propargylic acid and its methyl ester, where only oligomers formed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Degradable multisegmented polymers synthesized by consecutive radical addition‐coupling reaction of α,ω‐macrobiradicals and nitroso compound

A consecutive radical addition‐coupling reaction induced by spin‐trapping agent is applied to produce degradable multisegmented polymer using α,ω‐dibromo polymer as a precursor. The macroradical generated by single electron transfer process catalyzed by Cu/PMDETA from α,ω‐dibromo polymer can be efficiently captured by 2‐methyl‐2‐nitrosopropane (MNP), which results in nitroxide radical. The in situ formed nitroxide radical immediately undergoes cross‐coupling reaction with polymeric radical, generating block polymer bridged with alkoxyamine moiety. The consecutive radical addition‐coupling reaction generates multisegmented polymer via step‐growth mechanism. Different multisegmented polymers have been prepared from α,ω‐dibromo‐PS, PtBA, and PtBA‐PS‐PtBA. The block number of multisegmented polymers can be tailored by varying the feed ratio of α,ω‐dibromo precursor to MNP. The multisegmented polymer can be degraded in the presence of hydrogen atom donor or air, and the molecular weight distribution transformed back into shape of its original precursor as it is conjugated by alkoxyamine moieties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Scalable ambient synthesis of water‐soluble poly(β‐hydroxythio‐ether)s

Proton transfer polymerization through thiol‐epoxy “click” reaction between commercially available and hydrophilic di‐thiol and di‐epoxide monomers is carried out under ambient conditions to furnish water‐soluble polymers. The hydrophilicity of monomers permitted use of aqueous tetrahydrofuran as the reaction medium. A high polarity of this solvent system in turn allowed for using a mild catalyst such as triethylamine for a successful polymerization process. The overall simplicity of the system translated into a simple mixing of monomers and isolation of the reactive polymers in an effortless manner and on any scale required. The structure of the resulting polymers and the extent of di‐sulfide defects are studied with the help of 13C‐ and ¹H‐NMR spectroscopy. Finally, reactivity of the synthesized polymers is examined through post‐polymerization modification reaction at the backbone sulfur atoms through oxidation reaction. The practicality, modularity, further functionalizability, and water solubility aspects of the described family of new poly(β‐hydroxythio‐ether)s is anticipated to accelerate investigations into their potential utility in bio‐relevant applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3381–3386     

Preparation of H‐shaped ABCAB terpolymers by atom transfer radical coupling

H‐shaped ABCAB terpolymers composed of polystyrene (PS) (A), poly(ethylene oxide) (PEO) (B), and poly(tert‐butyl acrylate) (PtBA) (C) were prepared by atom transfer radical coupling reaction using ABC star terpolymers as precursors, CuBr and N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as catalysts, and nanosize copper as the reducing agent. The synthesis of 3‐miktoarm star terpolymer PS‐PEO‐(PtBA‐Br) involved following steps: (1) the preparation of PS with an active and an ethoxyethyl‐ptotected hydroxyl group at the same end; (2) the preparation of diblock copolymer PS‐b‐PEO with ethoxyethyl‐protected group at the junction point through the ring‐opening polymerization (ROP) of EO; (3) after de‐protection of ethoxyethyl group and further modification of hydroxyl group, tBA was polymerized by atom transfer radical polymerization using PS‐b‐PEO with 2‐bromoisobutyryl functional group as macroinitiator. The H‐shaped terpolymer could be successfully formed by atom transfer radical coupling reaction in the presence of small quantity of styrene, CuBr/PMDETA, and Cu at 90 °C. The copolymers were characterized by SEC, ¹H NMR, and FTIR in detail. The optimized coupling temperature is 90 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 59–68, 2009     

Synthesis of H‐shaped complex macromolecular structures by combination of atom transfer radical polymerization,photoinduced radical coupling,ring‐opening polymerization,and iniferter processes

Three controlled/living polymerization processes, namely atom transfer radical polymerization (ATRP), ring‐opening polymerization (ROP) and iniferter polymerization, and photoinduced radical coupling reaction were combined for the preparation of ABCBD‐type H‐shaped complex copolymer. First, α‐benzophenone functional polystyrene (BP‐PS) and poly(methyl methacrylate) (BP‐PMMA) were prepared independently by ATRP. The resulting polymers were irradiated to form ketyl radicals by hydrogen abstraction of the excited benzophenone moieties present at each chain end. Coupling of these radicals resulted in the formation of polystyrene‐b‐poly(methyl methacrylate) (PS‐b‐PMMA) with benzpinacole structure at the junction point possessing both hydroxyl and iniferter functionalities. ROP of ε‐caprolactone (CL) by using PS‐b‐PMMA as bifunctional initiator, in the presence of stannous octoate yielded the corresponding tetrablock copolymer, PCL‐PS‐PMMA‐PCL. Finally, the polymerization of tert‐butyl acrylate (tBA) via iniferter process gave the targeted H‐shaped block copolymer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4601–4607     

9‐Bromoanthracene photodimers as initiators in controlled radical polymerization: Silane radical atom abstraction coupled with nitroxide mediated polymerization

Slow initiation relative to propagation has previously prevented photodimers of 9‐bromoanthracene or 9‐chloroanthracene, formed by [4 + 4] photocyclization reactions of the analogous 9‐haloanthracene, from being viable initiators in atom transfer radical polymerization (ATRP) reactions. The resulting polymers were found to possess high polydispersity index (PDI) values, much higher than expected number average molecular weight (M_n) values, with the reaction displaying a nonlinear relationship between monomer conversion and M_n. We report here the use of silane radical atom abstraction (SRAA) to create initiating bridgehead radicals in the presence of 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) to mediate the polymerization. When using SRAA coupled with nitroxide mediated polymerization, a dramatic decrease in PDI values was observed compared with analogous ATRP reactions, with M_n values much closer to those anticipated based on monomer‐to‐initiator ratios. Analysis using UV‐Vis spectroscopy indicated only partial anthracene labeling (～ 25%) on the polymers, consistent with thermolysis of the anthracene photodimer coupled with competition between initiation from the bridgehead photodimer radical and silane‐based radical. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6016–6022, 2008     

Orthogonal multiple click reactions in synthetic polymer chemistry

This review highlights the concept of multiple click reaction strategy which is utilized for design and synthesis of well‐defined complex macromolecular structures as well as multifunctionalization of well‐defined polymers. This review examines the click combinations mainly from double to quadruple and additionally from the most frequently used to the least. The present review may also be regarded as an update for recent reviews dealing with specifically double and triple click reaction combinations in synthetic polymer chemistry. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3147–3165     

Copper‐mediated radical polymerization on a microcellular monolith surface

High‐capacity microcellular monoliths were prepared by a two‐step process, including the synthesis of a bromoester‐functionalized scaffold by the copolymerization of a highly concentrated emulsion and an in situ surface polymerization of methyl methacrylate with atom transfer radical polymerization. The influence of various parameters, such as the feed ratio, the concentration of immobilized bromoester groups, and the presence of a spacer group on the poly(methyl methacrylate) loading, was studied. Monoliths with capacities of up to 7 mmol g^?1 were obtained. Thermogravimetric analyses, scanning electron microscopy experiments, and mercury intrusion porosimetry measurements were used for the characterization of the final materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1216–1226, 2004     

Atom transfer radical polymerization synthesis and photoresponsive solution behavior of spiropyran end‐functionalized polymers as simplistic molecular probes

Poly(methyl methacrylate)s (PMMAs) of two different molecular weights having a single photochromic benzospiropyran (BSP) end‐group were synthesized by atom transfer radical polymerization (ATRP). Polymer characterization by ¹H NMR and matrix‐assisted laser desorption/ionitiation time of flight‐mass spectroscopy confirms that using an ATRP initiator equipped with BSP, a near quantitative functionalization of the PMMA with the BSP was achieved. Both polymers exhibit photochroism characterized by the UV‐induced transition from BSP to benzomerocyanine (BMC) in acetonitrile. However, a strong molecular weight dependence of the thermal relaxation kinetic of the BMC was found with a significantly faster temperature‐dependent transition for the higher molecular weight polymer. Thermodynamic analysis of the process revealed a higher gain in the entropy of activation ΔS^± for the transition process in the higher molecular weight polymer. This suggests an energetically unfavorable nonpolar environment of the BMC group in the higher molecular weight polymers, although a higher solvation of the BMC in the lower molecular weight polymer contributes to its stabilization. The ability of the BMC polymer end‐groups to organize was shown in metal ion‐binding experiments forming bivalently linked complexes with Co ions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Facile synthesis of dopa‐functional polycarbonates via thiol‐Ene‐coupling chemistry towards self‐healing gels

Since extraction of the naturally occurring mussel‐foot proteins is expensive and time‐consuming, routes towards synthetic analogues are continuously being explored. Often, these methods involve several protection and deprotection steps, making the synthesis of synthetic analogues time‐consuming and expensive as well. Herein, we show that UV‐initiated thiol‐ene coupling between a thiol‐functional dopamine derivative and an allyl‐functional aliphatic polycarbonate can be used as a fast and facile route to dopa‐functional materials. Different thiol‐to‐allyl ratios and irradiation protocols were used and it was found that nearly 50% of the allyl groups could be functionalized with dopa within short reaction times, without the need of protecting the catechol. It is also demonstrated herein that the dopa‐functional polymers can be used to form self‐healing gels through complexation with Fe³⁺ ions at increased pH. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2370–2378     

Thermodegradable multisegmented polymer synthesized by consecutive radical addition‐coupling reaction of α,ω‐macrobiradicals and dithioester

A consecutive radical addition‐coupling reaction involving dithioester is applied to produce thermodegradable multisegmented polymer using α,ω‐dibromo polymer as precursor. The macroradical generated by single electron transfer process promoted by Cu/ligand from α,ω‐dibromo polymer can efficiently add to ethyl dithiobenzoate, which results intermediate adduct radical. The in situ formed adduct radical immediately undergoes crosscoupling reaction with macroradical, generating segmented polymer bridged with C? S bond. The consecutive radical addition‐coupling reaction generates multisegmented polymer linked by C? S bond following step‐growth mechanism. The multisegmented polymer can be thermodegraded in the presence of hydrogen atom donor or air. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Modification of carboxyl‐functionalized single‐walled carbon nanotubes with biocompatible,water‐soluble phosphorylcholine and sugar‐based polymers: Bioinspired nanorods

We report here the successful functionalization of single‐walled carbon nanotubes with bioinspired sugar and phosphocholine polymeric structures via surface‐initiated atom transfer radical polymerization. The surface‐polymer‐coated carbon nanotubes have been systematically analyzed by Raman, infrared, ultraviolet–visible, and nuclear magnetic resonance spectroscopy and high‐resolution transmission electron microscopy, which give strong evidence of successful functionalization. The successful aqueous dispersion of the functionalized carbon nanotubes also indicates that functionalization has been achieved. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6558–6568, 2006     

Free radical and nitroxide mediated polymerization of hydroxy–functional acrylates prepared via lipase–catalyzed transacylation reactions

3‐Hydroxypropyl acrylate, 4‐hydroxybutyl acrylate, 2‐methyl‐3‐hydroxypropyl acrylate, 2‐hydroxypropyl acrylate, neopentyl glycol acrylate, glyceryl acrylate, and dihydroxyhexyl acrylate were prepared via transacylation reaction of methyl acrylate with diols and triols catalyzed by Candida antarctica lipase B. After removal of the enzyme by filtration and the methyl acrylate by distillation, the monomers were polymerized via free radical polymerization (FRP) with azobisisobutyronitrile as initiator and nitroxide mediated polymerization (NMP) employing Blocbuilder? alkoxyamine initiator and SG‐1 free nitroxide resulting in hydroxy functional poly(acrylates). The NMP kinetics are discussed in detail. In addition, the polymers obtained by FRP and NMP are compared and the results are related to the amount of bisacrylates that are present in the initial monomer mixtures resulting from the transacylation reactions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2610–2621, 2010     

Construction of hydroxyl‐terminated poly(N‐isopropylacrylamide) brushes on silicon wafer via surface‐initiated atom transfer radical polymerization

Surface‐initiated atom transfer radical polymerization (SI‐ATRP) of N‐isopropylacrylamide (NIPAM) on silicon wafer in the presence of 2‐mercaptoethanol (ME) chain transfer agent was conducted in attempt to create controllable hydroxyl‐terminated brushes. The initiator‐immobilized substrate, was prepared by the esterification of hydroxyl groups on silicon wafer with 2‐bromopropionyl bromide (2‐BPB); followed by the ATRP of NIPAM using a catalyst system, that is, Cu(I)Br/2,2′‐bipyridine (2,2′‐bpy) and a chain transfer agent, that is, ME. The formation of homogeneous tethered poly(N‐isopropylacrylamide) (poly(NIPAM) brushes with hydroxyl end‐group, whose thickness can be tuned by chancing ME concentration, is evidenced by using the combination of grazing angle attenuated total reflectance‐Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, ellipsometry, atomic force microscopy, gel permeation chromatography, and water contact‐angle measurements. The calculation of grafting parameters from experimental measurements indicated the synthesis of densely grafted poly(NIPAM) films with hydroxyl end‐group on silicon wafer and allowed us to predict a ME concentration for forming a “brush” conformation for the chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3880–3887, 2010     

Fast and effective copper(0)‐mediated simultaneous chain‐ and step‐growth radical polymerization at ambient temperature

Vinyl‐conjugated monomer (methyl acrylate, MA) and allyl 2‐bromopropanoate (ABP)‐possessing unconjugated C?C and active C? Br bonds were polymerized via the Cu(0)‐mediated simultaneous chain‐ and step‐growth radical polymerization at ambient temperature using Cu(0) as catalyst, N,N,N′,N″,N″‐pentamethyldiethylenetriamine as ligand and dimethyl sulfoxide as solvent. The conversion was reached higher than 98% within 20 h. The obtained polymers showed block structure consisting of polyester and vinyl polymer moieties. The Cu(0)‐catalyzed simultaneous chain‐ and step‐growth radical polymerization mechanism was demonstrated by NMR, matrix‐assisted laser desorption ionization time‐of‐flight, and GPC analyses. Furthermore, the obtained copolymers of MA and ABP were further modified with poly(N‐isopropylamide) through radical thiol‐ene “click” chemistry from the terminal double bond. The thermoresponsive behavior of this block copolymer was investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3907–3916     

Unexpected reactions associated with the xanthate‐mediated polymerization of N‐vinylpyrrolidone

The monomer N‐vinylpyrrolidone (NVP) undergoes side reactions in the presence of R group functional xanthates and impurities. The fate of the monomer NVP and a selection of six O‐ethyl xanthates during xanthate‐mediated polymerization were studied via NMR spectroscopy. A high number of by‐products were identified. Significant side reactions affecting NVP include the formation of an unsaturated dimer and hydration products in bulk or in solution in C₆D₆. In addition, the xanthate adjacent to a NVP unit was found to undergo elimination at moderate temperature (60–70 °C), resulting in unsaturated species and the formation of new xanthate species. The presence of the chlorinated compound α‐chlorophenyl acetic acid, ethyl ester, a precursor in the synthesis of the xanthate S‐(2‐ethyl phenylacetate) O‐ethyl xanthate, resulted in a dramatic increase in the rate of side reactions such as unsaturated dimer formation and a high ratio of unsaturated chain ends. The conditions for the occurrence of such side reactions are discussed in this article, with relevance to increasing the control over the polymerization kinetics, endgroup functionality, and control over the molar mass distribution. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6575–6593, 2008     

Development of organotellurium‐mediated and organostibine‐mediated living radical polymerization reactions

Organotellurium‐mediated living radical polymerizations (TERPs) and organostibine‐mediated living radical polymerizations (SBRPs) provide well‐defined polymers with a variety of polar functional groups via degenerative chain‐transfer polymerization. The high controllability of these polymerizations can be attributed to the rapid degenerative‐transfer process between the polymer‐end radicals and corresponding dormant species. The versatility of the methods allows the synthesis of AB diblock, ABA triblock, and ABC triblock copolymers by the successive addition of different monomers. This review summarizes the current status of TERP and SBRP. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1–12, 2006     

Direct synthesis of tetrazine functionalities on polymer backbones

Tetrazine mediated inverse Electron Demand Diels–Alder Reaction (IEDDA) is an important modification technique due to its high selectivity and super‐fast kinetics. Incorporation of tetrazine moieties on polymer chains requires multistep synthetic pathways and a post‐polymerization step leading to functional polymeric materials. Such approaches involve separate syntheses of polymer and the molecule which will be employed in modification. Herein, we introduce a straightforward synthetic approach for direct synthesis of tetrazine groups on polymers as side chains. As model systems, tetrazine functional poly(N‐isopropylacrylamide)‐and poly(ethylene glycol)‐based polymers from corresponding precursor polymers with nitrile moieties as pendant groups are prepared and IEDDA Click Reaction is achieved with trans‐cyclooctene derivatives. The click reaction is monitored by both NMR and UV–vis spectroscopies. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 673–680