Synthesis of supramolecular precision polymers: Crystallization under conformational constraints

Placing artificial folding elements into precision polymers is an important strategy to systematically study structure formation in self‐assembly, particularly in the semicrystalline state. To this purpose, a series of precision polymers bearing either a N‐ protected or N‐ unprotected diaminopyridine (DAP) unit after every 16th, 18th, and 20th carbon as well as a urea unit after every 20th carbon along a polyethylene‐like polymer were synthesized via acyclic diene metathesis polymerization and subsequent hydrogenation. The polymers thus contain either H‐bonds (urea/DAP), π–π‐elements (DAP), or no H‐bonds (respective N? protected urea/DAP‐units) in their main chain, able to consequently study the crystallization behavior under influence of such supramolecular moieties. Therefore, the thermal properties and crystallization behavior were analyzed via differential scanning calorimetry (DSC) as well as wide angle X‐ray diffraction. The obtained crystalline polymer is influenced by the different supramolecular interactions existing between adjacent polymer chains and the varying defect size exerted by the incorporated functional groups. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3736–3748     

Effect of thermal history on the free volume properties of semi‐crystalline poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) membranes by positron annihilation lifetime spectroscopy

Free volume properties of a series of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) membranes, which were produced by various nonisothermal crystallization processes (rapid‐, step‐, and slow‐cooling processes), were investigated using positron annihilation lifetime (PAL) spectroscopy over a temperature range of 25–90 °C. From the annihilation lifetime parameters, the temperature dependence of free volume size, amount, size distribution, and fractional free volume and thermal expansion properties of free volume were discussed. A model which assumed that amorphous phase was subdivided into mobile and rigid amorphous fractions (MAF and RAF) in the semicrystalline polymer was considered to interpret the temperature dependence of those free volume properties. Morphological observation of the semicrystalline polymer by small‐angle X‐ray scattering (SAXS) indicated that the rapid‐cooled (cold‐crystallized) membranes showed a much thinner thickness of the repeating lamellar/amorphous layers and most likely higher amount of RAF, which restrained the chain motion, than the step‐ and slow‐cooled (melt‐crystallized) membranes. The difference of free volume properties among various PHBV membranes was created according to the crystalline structure of the polymer from different thermal history. The polymer crystallized with slower cooling rate induced higher crystallinity and resulted in less free volume amount and lower fractional free volume. In addition, the thermal expansion coefficients of free volume size were affected by the crystallization rate of PHBV polymer. Larger distribution of the free volume size of melt‐crystallized membranes was observed as a result of the bimodal distribution of the lamellar periodicity and less amount of RAF than that of the cold‐crystallized membranes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 855–865, 2009     

Synthesis and thermal crosslinking of carbosiloxane and oligo(oxyethylene) polymers

Acyclic diene metathesis (ADMET) polymerization has been used in the synthesis of telechelic materials using alkoxy‐functionalized carbosiloxane or oligo(oxyethylene)‐based polymers, varying from internal to terminal cured materials or the combination of them. Previous investigations demonstrated that introduction of chain‐end crosslinking improves the stress–strain behavior of such materials. A series of saturated and unsaturated carbosiloxane and oligo(oxyethylene)‐based polymers were synthesized by ADMET polymerization using silacyclobutane as chain‐end, thermally induced crosslinker. The carbosiloxane derivatives presented pure amorphous behavior, whereas the oligo(oxyethylene) polymers were semicrystalline. The thermal curing process was monitored by differential scanning calorimetry via the exotherm between 160 and 210 °C. Mechanical properties on thermoset polymers were measured, where cured polymers showed moduli from 0.6 to 9.3 MPa, tensile strengths from 0.3 to 1.0 MPa, and elongations from 12 to 76%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Phosphorus‐containing renewable polyester‐polyols via ADMET polymerization: Synthesis,functionalization, and radical crosslinking

An α,ω‐diene containing hydroxyl groups was prepared from plant oil‐derived platform chemicals. The acyclic diene metathesis copolymerization (ADMET) of this monomer with a phosphorus‐containing α,ω‐diene (DOPO II), also plant oil derived, afforded a series of phosphorus containing linear polyesters, which have been fully characterized. The backbone hydroxyls of these polyesters have been acrylated and radically polymerized to produce crosslinked polymers. The thermomechanical and mechanical properties, the thermal stability, and the flame retardancy of these phosphorus‐based thermosets have been studied. Moreover, methyl 10‐undecenoate has been used as chain stopper in selected ADMET polymerizations to study the effect of the prepolymers' molecular weights on the different properties of the final materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1649–1660, 2010     

A tailor‐made polymethacrylate bearing a reactive diene in reversible diels–alder reaction

A tailor‐made polymethacrylate bearing a pendant furfuryl group was prepared by atom transfer radical polymerization (ATRP), an important method of recent advances in controlled radical polymerization. It was otherwise difficult to prepare via conventional radical polymerization, because of several side reactions involving the reactive diene functionality of the furfuryl group. Successful Diels–Alder (DA) chemistry was carried out using this reactive furfuryl group of the tailor‐made polymer as diene and a bismaleimide as a dienophile. Interestingly, the resultant material was observed to be thermoreversible as evidenced by FT‐IR and DSC studies. This example of application of a tailor‐made polymer having controlled molecular architecture and with reactive diene functionality in DA chemistry will open new possibilities to prepare newer tailor‐made reversible materials. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4441–4449, 2007     

Synthesis of poly(p‐phenylene sulfide) from bis(4‐bromophenyl) disulfide

Improved reaction conditions for the preparation of poly(p‐phenylene sulfide) (PPS) directly from bis(4‐bromophenyl) disulfide (BBD) have been established. Heating BBD with magnesium metal afforded only a low molecular weight polymer. PPS with a melting temperature around 280 °C was obtained from BBD in the presence of sodium carbonate or zinc metal. The best results were obtained with the addition of a catalytic amount of KI to the zinc–BBD mixture. Polymers prepared by the above methods are semicrystalline and dissolve in 1‐chloronaphthalene and have properties comparable to commercial PPS. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 900–904, 2006     

Electron spin resonance study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent. V. Comparison with polypropylene and ethylene‐propylene copolymer

We studied the chemical reaction process of polypropylene (PP), ethylene‐propylene copolymer (EPM), and ethylene‐propylene‐diene copolymer (EPDM) crosslinking induced by dicumyl peroxide (DCP) using electron spin resonance (ESR). Free radicals appeared at an elevated temperature of around 120 °C and the behavior and kinetics of the reaction process were observed at 180 °C. The radical species detected in PP were alkyl type radicals, formed by the abstraction of hydrogen atoms from the tertiary carbon of polymer chains. For EPDM containing a diene component, the radicals were trapped at double bonds in this diene component to form allyl radicals. The resolutions of these spectra were extremely clear; hence, isotropic spectra of these polymer radicals were obtained. We measured the ESR at high temperatures and confirmed that the process of crosslinking induced by DCP was a free radical reaction. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3383–3389, 2000     

A model for charge transport in semicrystalline polymer thin films

A model for simulating the charge transport properties of semicrystalline polymer (SCrP) using Monte Carlo simulation is reinvented. The model is validated by reproducing the experimentally observed field and temperature dependence of mobility in Poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) thin films. This study also provides a new physical insight to the origin of much debated negative field dependence of mobility (NFDM) observed at low electric field strengths in P3HT thin films. The observed NFDM, which is not explainable with the mechanisms proposed earlier, is attributed to the weak dependence of transit time on the applied electric field strengths. In the semicrystalline films, the charge transport takes place mostly through the crystalline regions, in which the charge transport is weakly dependent on the strength of the applied electric field. In addition, a possible explanation for the origin of Arrhenius temperature dependence of mobility (lnμ ∝ 1/T) commonly observed in SCrP thin films is also proposed. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 137–141     

Understanding Creep Behavior of Semicrystalline Polymer via Coarse‐Grained Modeling

Understanding the deformational and failure behaviors of thermoplastic semicrystalline polymers is crucial due to the practical usages in various engineering applications. Taking isotactic polypropylene (iPP) as a semicrystalline polymer model system, atomistically informed coarse‐grained (CG) molecular dynamics (MD) simulations are employed to investigate the creep behavior of iPP. The simulations reveal that there exists a threshold stress of about 20.0 MPa, above which the maximum strain of iPP within the simulation time span increases dramatically. From the strain‐time analysis, it is observed that the iPP exhibits an initial elastic deformation stage and a subsequent plastic stage at lower stress levels, while a three‐stage creep behavior including a third fracture stage is observed at higher stress levels. Specifically, at lower stress levels, the bonded energy increases continuously as the chains stretch steadily, while the nonbonded energy shows an initial increase followed by a steady decrease due to the interchain sliding. At higher stress levels, both bonded and nonbonded energies change dramatically at the third stage, resulting from accelerated chain stretching, unfolding, sliding, and breaking. This study provides physical insight into the creep behavior of iPP at a fundamental molecular level and highlights the important role of microstructural evolution of chains in the deformation of semicrystalline polymer materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1779–1791     

Organic solvent‐free catalytic hydrogenation of diene‐based polymer nanoparticles in latex form. Part II. Kinetic analysis and mechanistic study

The central challenge that has limited the development of catalytic hydrogenation of diene‐based polymer latex (i.e., latex hydrogenation) in large‐scale production pertains to how to accomplish the optimal interplay of accelerating the hydrogenation rate, decreasing the required quantity of catalyst, and eliminating the need for an organic solvent. Here, we attempt to overcome this dilemma through decreasing the dimensions of the polymer substrate (such as below 20 nm) used in the hydrogenation process. Very small diene‐based polymer nanoparticles were synthesized and then used as the substrates for the subsequent latex hydrogenation. The effects of particle size, temperature, and catalyst concentration on the hydrogenation rate were fully investigated. An apparent first‐order kinetic model was proposed to describe the rate of hydrogen uptake with respect to the concentration of the olefinic substrate (C?C). Mass transfer of both the hydrogen and catalyst involved in this solid (polymer)–liquid (water)–gas (hydrogen) three‐phase latex system is discussed. The competitive coordination of the catalyst between the C?C and acrylonitrile units within the copolymer was elucidated. It was found that (1) using very small diene‐based polymer nanoparticles as the substrate, the hydrogenation rate of polymer latex can be increased vastly to achieve a high conversion of 95% while a quite low level of catalyst loading is required; (2) this latex hydrogenation process was completely free of organic solvent and no cross‐linking was found; (3) the mass transfer of hydrogen is not a rate‐determining step in the present hydrogenation reactions; (4) the catalyst was dispersed homogeneously within the polymer nanoparticles; (5) for the reaction that has reached about 95 mol % conversion, the kinetic study shows that the reaction is chemically controlled with an apparent activation energy of 100–110 kJ/mol; (6) the strong coordination of C[tbond]N to the catalytically active species RhH₂Cl(PPh₃)₂ imposed a negative effect on the hydrogenation activity. The present research provides a comprehensive study to appreciate the underlying chemistry of latex hydrogenation of diene‐based polymer nanoparticles and more importantly shows great promise toward the commercialization of a “green” catalytic hydrogenation operation of a diene‐based polymer latex in industry. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of oligo(oxyethylene)/carbosilane copolymers for thermoset elastomers via ADMET

Acyclic diene metathesis (ADMET) polymerization has been used to synthesize latent reactive processable elastomers constructed of carbosilane and polyether segments. Two types of latent modes have been introduced: “chain‐internal” and “chain‐end” sites through the use of labile silicon methoxy functionalities. These latent reactive groups are inert when exposed to metathesis conditions allowing formation of the linear copolymer; subsequently exposure to moisture triggers hydrolysis of the methoxy groups and formation of a chemically crosslinked thermoset. The thermoset's mechanical response can be potentially varied from plastic to elastic behavior, depending on the ratio of carbosilane and oligooxyethylene monomers employed. Different lengths of glycols and numbers of methylene groups between them in the polymer backbone have been investigated to explore structure/property relationship. Polymers composed of oligooxyethylenes with eight methylene groups in between them exhibited fully amorphous character, while the ones with up to 20 methylene groups between glycol units showed their semicrystalline nature. The concentration of “chain‐internal” and “chain‐end” crosslink sites enhances strength; modification to the run length and structure of the soft phase enhances elasticity. Resultant materials have been subjected to mechanical tests using Instron; generated stress/strain curves have shown plastic and elastic behavior. Depending on the composition obtained samples have shown moduli from 0.3 to 115 MPa, tensile strengths from 0.6 to 10 MPa and elongations from 20 to 700%. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3992–4011, 2008     

Molecular design of diene monomers containing an ester functional group for the synthesis of poly(diene sulfone)s by radical alternating copolymerization with sulfur dioxide

Functional poly(diene sulfone)s are prepared by the radical alternating copolymerization of 1,3‐diene monomers containing an ester substituent with sulfur dioxide. Methyl 3,5‐hexadienoate (MH) and methyl 5,7‐octadienoate (MO) with both an alkylene spacer and a terminal diene structure are suitable to produce a high‐molecular‐weight copolymer in a high yield, while the copolymerization of 5,7‐nonadienoic acid, ethyl 2,4‐pentadienoate, and ethyl 4‐methyl‐2,4‐pentadienoate including either an alkylene spacer or a terminal diene structure lead to unsuccessful results. The ¹³C NMR chemical shift values of MH and MO suggest a high electron density at their reacting α‐carbon for exhibiting a high copolymerization reactivity. Fluorene‐containing diene monomers, 9‐fluorenyl 3,5‐hexadienoate (FH) and 9‐fluorenyl 5,7‐octadienoate (FO), are also prepared and copolymerized with sulfur dioxide. The thermal and optical properties of the poly(diene sulfone)s containing the methyl and fluorenyl ester substituents in the side chain are investigated. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1000–1009     

Chemo‐ and stereoselective polymerization of 3‐methylenehepta‐1,6‐Diene and Its thiol‐ene modification

Here we report on the coordination polymerization of a vinyl‐functionalized butadiene monomer, 3‐methylenehepta‐1,6‐diene (MHD) with exclusive conjugated diene chemoselectivity, high 1,2‐regioselectivity and moderate isotacticity (1,2‐selectivity > 99%, mm triad = 93%). Random copolymers of MHD and other conjugated diene (isoprene or myrcene) are also synthesized. The pendent vinyl groups of MHD homo or copolymers could be quantitatively converted into various functional groups via thiol‐ene click reaction. The resulting functionalized polybutadiene‐based material display versatile thermal and surface properties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1031–1039     

Modeling the mechanical properties of highly oriented polymer films: A fiber/gel composite theory approach

Controlling the extent of orientation is of great interest in polymer processing and is effected by the choice of polymer, the fabrication technique and the processing conditions. Understanding the crystalline transitions that form highly oriented fibrils is necessary for modeling the changes in physical properties, relative to degree of orientation. A model is proposed to describe the mechanical properties of drawn semicrystalline polymer films based on structural transitions. With a minimal amount of experimental data (requiring testing on only two drawn films samples), this model can be used to predict film properties. These properties include the critical and maximum draw ratios, the moduli at the maximum draw ratio, the moduli of the fiber, the modulus of the nonfibrous gel relative to draw ratio, the volume fraction of fibers, and the rate of fibrillation. Where high degrees of uniaxial orientation are required, the polymer is typically drawn in the solid state, meaning the polymer is stretched in a single direction at temperatures below the melting point. During this process, pre‐existing crystallites are transformed into fiber‐like structures with large aspect ratios. The presence of these rigid asymmetric structures significantly enhances the moduli and break strength of the polymer. This work presents a model that describes the formation of fiber‐like structures. The volume fraction of fibers is predicted to be linear in draw ratio. The derived relationship between volume fraction of fibers and draw ratio can then be used for the prediction of the various properties of the oriented film. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 607–618, 2008     

Micromechanisms involved in the atypical tensile behavior observed in polyamide 11 at high temperature

Even far above the glass transition temperature, the amorphous phase in semicrystalline polymers is known to be constrained by crystals and less mobile than a pure amorphous polymer close to its equilibrium rubbery state. The aim of this paper devoted to Polyamide 11 was to investigate the existence and significance of a relaxed state in the amorphous phase of a semicrystalline polymer far above T_g. It focuses on the high temperatures, low strain‐rates, and small deformation ranges. A nonstrain‐rate dependent tensile curve (called “asymptotic curve”) was evidenced below a critical strain‐rate, consistently with reaching a fully relaxed state of the rubbery amorphous phase. Nevertheless, paradoxical mechanical features were observed at the same time (nonstrain‐rate dependent but hysteretic unloading, relaxation, and creep involving same strain‐rates as the asymptotic loading regime). Micromechanisms (orientation of primary crystals, creation of local hexagonal arrangements, orientation, and relaxation of the amorphous phase) were analyzed from DSC and X‐ray experiments. It suggested distinct amorphous and crystalline contributions depending on the loading path and therefore highlighted paradox of the mechanical behavior. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3046–3059, 2007     

Two‐dimensional polymer synthesis through the topochemical polymerization of alkylenediammonium muconate as a multifunctional monomer

Here we demonstrate a unique two‐dimensional polymer synthesis through topochemical polymerization via polymer crystal engineering, which is useful for controlling and designing the polymerization reactivity as well as the polymer chain and crystal structures. We have succeeded in the synthesis of a sheet polymer through the polymerization of alkylenediammonium (Z,Z)‐muconate as a multifunctional 1,3‐diene monomer in the crystalline state under the irradiation of UV and γ‐rays or upon heating in the dark. The photopolymerization reactivity of several muconates and the structural control of the obtained polymer are described. The stereochemical structure of the polymer and the polymerization mechanism are discussed on the basis of the results of IR and NMR spectroscopy, thermogravimetric measurements, and solid‐state hydrolysis for the transformation into poly(muconic acid). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3922–3929, 2004     

Understanding the effect of skin formation on the removal of solvents from semicrystalline polymers

The effect of glassy skin formation on the drying of semicrystalline polymers was investigated with a comprehensive mathematical model developed for multicomponent systems. Polymers with high glass‐transition temperatures can become rubbery at room temperature under the influence of solvents. As the solvents are removed from the polymer, a glassy skin can form and continue to develop. The model takes into account the effects of diffusion‐induced polymer crystallization as well as glassy–rubbery transitions on the overall solvent content and polymer crystallinity. A Vrentas–Duda free‐volume‐based diffusion scheme and crystallization kinetics were used in our model. The polymer–solvent system chosen was a poly(vinyl alcohol) (PVA)–water–methanol system. The drying kinetics of PVA films were obtained by gravimetric methods with swollen films with known water/methanol concentrations. The overall drying behaviors of the polymer system determined by our model and experimental methods were compared and found to match well. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3191–3204, 2005     

Semicrystalline blends of polyethylene and isotactic polypropylene: Improving mechanical performance by enhancing the interfacial structure

The low‐temperature mechanical behavior of semicrystalline polymer blends is investigated. Isotactic polypropylene (iPP) is blended with both Zeigler–Natta polyethylene (PE) and metallocene PE. Transmission electron microscopy (TEM) on failed tensile bars reveals that the predominate failure mode in the Zeigler–Natta blend is interfacial, while that in the metallocene blend is failure of the iPP matrix. The observed change in failure mode is accompanied by a 40% increase in both tensile toughness and elongation at −10 °C. We argue that crystallite anchoring of interfacially entangled chains is responsible for this dramatic property improvement in the metallocene blend. The interfacial width between PE and iPP melts is approximately 40 Å, allowing significant interfacial entanglement in both blends. TEM micrographs illustrate that the segregation of low molecular weight amorphous material in the Zeigler–Natta blend reduces the number and quality of crystallite anchors as compared with the metallocene blend. The contribution of anchored interfacial structure was further explored by introducing a block copolymer at the PE/iPP interface in the metallocene blend. Small‐angle X‐ray scattering (SAXS) experiments show the block copolymer dilutes the number of crystalline anchors, decoupling the interface. Increasing the interfacial coverage of the block copolymer reduces the number of anchored interfacial chains. At 2% block copolymer loading, the low‐temperature failure mode of the metallocene blend changes from iPP failure to interfacial failure, reducing the blend toughness and elongation to that of the Zeigler–Natta blend. This work demonstrates that anchored interfacial entanglements are a critical factor in designing semicrystalline blends with improved low‐temperature properties. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 108–121, 2000     

A bicyclic conjugated diene monomer,tetrahydroindene, for cationic polymerization and a novel alicyclic hydrocarbon polymer with heat resistance

This study was directed toward the cationic polymerization of tetrahydroindene (i.e., bicyclo[4.3.0]‐2,9‐nonadiene), a bicyclic conjugated diene monomer, with a series of Lewis acids, especially focusing on the synthesis of high‐molecular‐weight polymers and subsequent hydrogenation for novel cycloolefin polymers with high service temperatures. EtAlCl₂ or SnCl₄ induced an efficient and quantitative cationic polymerization of tetrahydroindene to afford polymers with relatively high molecular weights (number‐average molecular weight > 20,000) and 1,4‐enchainment bicyclic main‐chain structures. The subsequent hydrogenation of the obtained poly(tetrahydroindene) with p‐toluenesulfonyl hydrazide resulted in a saturated alicyclic hydrocarbon polymer with a relatively high glass transition (glass‐transition temperature = 220 °C) and improved pyrolysis temperature (10% weight loss at 480 °C). The new diene monomer was randomly copolymerized with cyclopentadiene at various feed ratios in the presence of EtAlCl₂ to give novel cycloolefin copolymers, which were subsequently hydrogenated into alicyclic copolymers with variable glass‐transition temperatures (70–220 °C). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6214–6225, 2006     

Synthesis and characterization of ion‐conducting polymer systems based on EPDM blends

This work reports the preparation and characterization of new polymeric ionomers based on etylene–propylene–diene copolymer (EPDM) with a high norbornene content. The sulfonation level was determined with X‐ray photoelectron spectroscopy, and the microstructural characterization was obtained through differential scanning calorimetry and dynamic mechanical analysis. In addition, the effects of certain plasticizers and polymers on the microstructures and conducting properties of these materials were studied, with special attention paid to the latter because of the interest aroused by these materials as membranes in polymer fuel cells. On the basis of the results, some of the synthesized membranes could be used for fuel cells because of their high conductivity (≥10^?2 S/cm) and good dimensional stability (any shrinkage observed). © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1017–1026, 2001