Preparation,characterization, and properties of polyamic acid nano‐emulsion

A facile method was developed to prepare polyamic acid (PAA) nano‐emulsion using a non‐aqueous emulsification. The resultant PAA nano‐emulsion was characterized by light‐scattering particle size analysis, transmission electron microscopy (TEM), zeta potential, and conductivity analyses. It was found that polyamic acid salt (PAS), formed by partially neutralizing PAA at the carboxylic groups using triethyl amine (TEA), was of great importance for nano‐emulsification. The effect factors on the formation of PAA nano‐emulsion were investigated. To get a stable PAA nano‐emulsion in methanol (precipitant), the following ratios are required: amine/COOH (molar ratio) = 0.6–0.7, precipitant/solvent (mass ratio) = 1.5–2.25. A PAA nano‐emulsion with droplets ranging in size from 50 to 100 nm was obtained under optimized conditions. The driving force for the formation of PAA nano‐emulsion was also discussed. Copyright © 2011 John Wiley & Sons, Ltd.     

A novel approach for preparation of conductive hybrid elastomeric nano‐composites

Since the discovery of carbon nanotubes (CNTs) and intrinsically conductive polymers, such as polyaniline (PANI) some research has focused on the development of novel hybrid materials by combining CNT and PANI to achieve their complementary properties. Electrically conductive elastomer nano‐composites containing CNT and PANI are described in the present investigation. The synthesis procedure includes in‐situ inverse emulsion polymerization of aniline doped with dodecylbenzene sulfonic acid in the presence of CNT and dissolved styrene‐isoprene‐styrene (SIS) block copolymer, followed by a precipitation–filtration step. The synthesis step is carried out under ultrasonication. The resulting uniform SIS/CNT/PANI dispersions are stable for long time durations. The incorporation of CNT/PANI in the SIS elastomeric matrix improves thermal, mechanical and electrical properties of the nano‐composites. The formation of continuous three‐dimensional CNT/PANI network, assumed to be responsible for enhancement of the resulting nano‐composite properties, is observed by HRSEM. A relatively low percolation threshold of 0.4 wt.% CNT was determined. The Young's modulus of the SIS/CNT/PANI significantly increases in the presence of CNT. High electrical conductivity levels were obtained in the ternary component systems. Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation of polyaniline‐sulfate salt ­by emulsion and aqueous ­polymerization pathway without using ­protonic acid

Aniline was polymerized directly into polyaniline‐sulfate salt without using protonic acid in this work. Polyaniline‐sulfate salt was prepared by emulsion and aqueous polymerization pathways. The dopant i.e. sulfate ion in polyaniline‐sulfate salt was generated from ammonium persulfate which was used for oxidizing aniline. Ammonium persulfate acts both as oxidizing agent as well as protonating agent in the polymerization process of aniline to polyaniline salt. The efficiency of oxidizing and protonating power of ammonium persulfate is increased by the use of surfactant. The activity of ammonium persulfate is further increased by the use of sulfuric acid as protonic acid. It may be necessary to consider the effect of sulfate ion which is generated during the oxidation process of aniline in the chemical polymerization of aniline to polyaniline salt by ammonium persulfate either aqueous or emulsion polymerization pathway in the presence of protonic acid/functionalized protonic acid. Copyright © 2001 John Wiley & Sons, Ltd.     

苯胺乳液聚合条件的研究

以（ＮＨ４）２Ｓ２Ｏ８为氧化剂、在非极性溶剂－功能质子酸－水三相体系中,采用乳液聚合方法合成聚苯胺乳液和粉末。对乳液聚合与化学氧化溶液聚合合成的聚苯胺性能进行了比较,研究了掺杂酸、氧化剂、反应时间、温度和水相浓度等聚合条件对聚苯胺导电性、溶解性、乳液粘度等性能的影响。结果表明,乳液聚合产率大于８０％,聚苯胺电导率大于１Ｓ／ｃｍ,在有机溶剂中的溶解性与用化学氧化合成的聚苯胺相比有明显提高。     

Highly conductive soluble terpolymers of aniline,toluidine, and o‐aminobenzoic acid/m‐aminobenzenesulfonic acid

Two series of terpolymers, one of o‐/m‐toluidine and aniline with o‐aminobenzoic acid and the other of o‐/m‐toluidine and aniline with m‐aminobenzenesulfonic acid, have been synthesized by oxidative polymerization via an emulsion method with ammonium persulfate as the oxidant and HCl as the external dopant. The terpolymers exhibit excellent solubility and retain the high conductivity (∼1 S cm⁻¹) characteristic of the unsubstituted homopolymer, polyaniline. The terpolymers also possess higher thermal stability than polyaniline. This can be attributed to the presence of internal doping groups and substituents, which introduce flexibility to the otherwise rigid polyaniline backbone. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3040–3048, 2005     

Synthesis of polyaniline/multiwall carbon nanotube composite via inverse emulsion polymerization

The composite of polyaniline (PANI) and multiwall carbon nanotube carboxylated through acid treatment (c‐MWCNT) was synthesized by chemical oxidative polymerization in an inverse emulsion system. The resultant composites were compared with products from aqueous emulsion polymerization to observe the improvements in electrical conductivity, structural properties, and thermal stability obtained by this synthetic method. Prior to the inverse emulsion polymerization, MWCNT was treated with a strong acid mixture to be functionalized with carboxylic acid groups. Carboxylic acid groups on surfaces induced selective dispersibility between polar and nonpolar solvents because of the increase of hydrophilicity. As the content of c‐MWCNT was increased, the electrical conductivity was increased by a charge transport function from the intrinsic electrical conductivity of MWCNT and the formation of a highly ordered dense structure of PANI molecules on the surface of c‐MWCNT. The images observed with electron spectroscopy showed the capping of c‐MWCNT with PANI. The growth of additional ordered structures of PANI/c‐MWCNT composite, which was observed through wide‐angle X‐ray diffraction patterns, supported the capping by PANI. It was observed that the doping of the composite had a significant relationship with the concentration of dodecylbenzenesulfonic acid (DBSA). The thermal stability of PANI composite was improved by the addition of c‐MWCNT; this was thought to be related with structure ordering by inverse emulsion polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2255–2266, 2008     

An emulsifier‐free core–shell polyacrylate/diacetone acrylamide emulsion with nano‐SiO2 for room temperature curable waterborne coatings

An emulsifier‐free core–shell polyacrylate emulsion, containing nano‐SiO₂ nanoparticles in the core and diacetone acrylamide (DAAM) in the shell, has been successfully prepared by emulsifier‐free seeded emulsion polymerization. The effects of reaction temperature, dropping time, nano‐SiO₂ and initiator contents, and variation of the composition of core monomers on the amount of coagulum, particle size, and monomer conversion have been investigated. The particle morphology and the distribution of emulsion particles have been measured by transmission electron microscopy (TEM) and dynamic light scattering. The keto‐carbonyl groups on the surface of the polyacrylate emulsion nanoparticles reacted with adipic dihydrazide (ADH) to form a film with a cross‐linked network structure at room temperature. Therefore, the emulsifier‐free core–shell emulsion could be used as a two‐component room temperature curable waterborne coating. It was also found that the properties of the coating were clearly superior after using the cross‐linker. Copyright © 2009 John Wiley & Sons, Ltd.     

Carbon nanotubes in emulsion‐templated porous polymers: Polymer nanoparticles,sulfonation, and conductivity

Sulfonated polymers are of interest for ion exchange resins, reaction supports, and membranes for separation, filtration, fuel cells, and electrochemical devices. Sulfonic groups have been introduced into polystyrene (PS) through exposure to sulfuric acid, and carbon nanotubes (CNTs) have been added to polymers to enhance proton conductivity without creating an electronic percolation pathway. PolyHIPEs, emulsion‐templated porous polymers with highly interconnected hierarchical open‐cell porous structures, are synthesized through polymerization in the external phases of high internal phase emulsions (HIPEs). In this article, the synthesis of PS‐based CNT‐filled polyHIPEs, their structure, sulfonation, and conductivity are described. Adding CNT dispersions to the HIPEs produced polymer nanoparticle–covered polyHIPEs from polymerization within the water‐soluble surfactant micelles in the internal aqueous phase droplets. The CNTs migrated from the HIPE's aqueous phase droplets into the HIPE's organic phase and formed interconnected bundles within the polyHIPE walls, reflecting a reduction in the surfactant's ability to disperse the CNTs. The water adsorption in the hygroscopic sulfonated polyHIPEs increased the conductivity by several orders of magnitude. The conductivity of the sulfonated polyHIPE containing CNTs was more than an order of magnitude greater than that of the sulfonated polyHIPEs with no CNTs. The CNTs act as “bridges,” enhancing the connection between existing conductive pathways. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4369–4377     

Characterization and anticorrosive properties of poly(2,3‐dimethylaniline)/nano‐Al2O3 composite synthesized by emulsion polymerization

Poly(2,3‐dimethylaniline)/nano‐Al₂O₃ composite (PAC) was synthesized by emulsion polymerization using dodecyl benzene sulfonic acid as emulsifier and dopant. The structure of PAC was characterized by Fourier fransformation infrared spectroscopy, UV–visible adsorption spectroscopy, and field emission scanning electron microscopy. The thermal stability was studied by thermogravimetric analysis, and the electrochemical performances were studied by cyclic voltammetry measurements. Epoxy coatings containing PAC and poly(2,3‐dimethylaniline) (P(2,3‐DMA)), respectively, were painted on steel, and accelerated immersion tests were performed to evaluate the anticorrosion property of the coatings in 3.5% NaCl solution. The results showed that the addition of PAC and P(2,3‐DMA) could improve the anticorrosion performance of epoxy coating significantly and the PAC coating had higher corrosion resistance than that of P(2,3‐DMA). Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and characterization of electrically conducting poly(o‐/m‐toluidine‐co‐o‐/m‐aminoacetophenone) copolymers

A series of poly(o‐/m‐toluidine‐co‐o‐/m‐aminoacetophenone) copolymers combining the features of high conductivity and processibility are synthesized and characterized by a number of techniques including ¹H NMR; thermogravimetry; IR, Raman, and UV–visible spectroscopy; scanning electron microscopy; and X‐ray diffraction. The copolymers are synthesized by the emulsion and inverse emulsion methods using conventional ammonium persulfate and a new oxidant, benzoyl peroxide, respectively. The influence of the polymerization conditions such as the monomer feed ratios, solvent, and the nonsolvent is investigated. The composition of the resulting copolymers is determined by ¹H NMR analysis. The conductivity of the copolymers varies with the aminoacetophenone content in the feed and the polymerization conditions. It is interesting that the conductivity of the copolymers is higher than that of the corresponding homopolymers. The results are rationalized on the basis of the effect of the ? COCH₃ substituent on the polymer structure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4300–4310, 2004     

Influence of the stirring speed and CaCl2 concentration on the nano‐object morphologies obtained via RAFT‐mediated aqueous emulsion polymerization in the presence of a water‐soluble macroRAFT agent

Aqueous emulsion polymerizations of styrene were performed in the presence of a macromolecular reversible addition‐fragmentation chain transfer (RAFT) agent (macroRAFT) composed of acrylic acid (AA) and poly(ethylene oxide) methyl ether acrylate (PEOA), end‐capped by a reactive dodecyl trithiocarbonate group (P(AA‐co‐PEOA)‐TTC). The influence of the stirring speed or the presence of different amounts of a divalent salt, CaCl₂, were investigated in this polymerization‐induced self‐assembly process, in which spherical and nonspherical nano‐objects were formed upon the synthesis of amphiphilic diblock copolymers in situ. It appeared that the addition of CaCl₂ led to the controlled formation of different nano‐objects such as spheres, fibers or vesicles, whereas an appropriate stirring speed was required for the formation of nanofibers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Fabrication of composite polyaniline/CNT nanofibers using an ultrasonically assisted dynamic inverse emulsion polymerization technique

This communication describes an ultrasonically assisted in‐situ dynamic inverse emulsion polymerization process of aniline in the presence of multi‐walled carbon nanotubes (MWNT) in toluene. During polymerization, MWNT are coated with polyaniline (PANI), forming a core‐shell structure of nano‐wires observed by high‐resolution scanning electron microscopy (HRSEM). The PANI coating of MWNT leads to a remarkable improvement in separation and dispersion of MWNT in toluene, which otherwise would have rapidly coagulated and settled. The presented dynamic polymerization process is very fast and produces stable clear dispersions. CNT enhances both the mechanical properties and electrical conductivity of PANI. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of water‐soluble conductive copolymer based on polyaniline

Synthesis and characterization of polyaniline‐grafted poly(styrene‐alt‐maleic anhydride) (PANI‐g‐PSMA) was carried out to obtain conductive comb copolymers with highly improved processability. First, polyaniline (PANI) was prepared in nano‐scale by chemical synthesis under ultrasonic irradiation. Then the poly(styrene‐alt‐maleic anhydride) (PSMA) was synthesized by free radical polymerization. Moreover, the PANI was grafted on the PSMA backbone to prepare a comb‐like conductive copolymer for improving its processability as a new method. The products were characterized by Fourier transform infrared, ultraviolet–visible spectroscopy and X‐ray diffraction patterns. Morphology of the samples was also investigated by scanning electron microscopy images. Finally, the solubility and conductivity of the products were studied, and it resulted in high solubility of the products in water and other common organic solvents in comparison to the pure PANI. Copyright © 2015 John Wiley & Sons, Ltd.     

Surface imprinted polymers for oil denitrification with the combination of computational simulation and multi‐template molecular imprinting

Multi‐template molecular imprinting technique was employed for the theoretical study about industrial oil denitrification. Prior to the preparation of multi‐template molecularly imprinted polymers (MT‐MIPs), density functional theory was used for simulating the imprinted pre‐assembly systems composed of template (aniline, indole, or 3‐methylinndole) and monomer [methacrylic acid, acrylamide (AM), and 4‐vinylpyridine]. MT‐MIPs were synthesized as surface MIPs simply and successively by seeded emulsion polymerization or two‐stage precipitation polymerization. The experimental results were consistent with the simulative results, which demonstrated that AM was more suitable monomer together. In addition, seeded emulsion polymerization synthesized MT‐MIPs with better performance compared with two‐stage precipitation polymerization. The adsorption kinetics and adsorption isotherm of MT‐MIP prepared with AM using seeded emulsion polymerization were fitted with different models. The fitting results indicated that pseudo‐second‐order kinetics model and Freundlich isotherm model were suitable for describing the adsorption process of AM seeded emulsion polymerization. This study will provide a certain guidance and theoretical basis for introducing the combination of multi‐template molecular imprinting technique and computational simulation into the field of industrial denitrification. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of high oil‐absorption resins of poly(methyl methacrylate‐butyl methacrylate) by suspended emulsion polymerization

The synthesis of high oil‐absorption resins by suspended emulsion polymerization process for the first time with butyl methacrylate (BMA) and short‐chain methyl methacrylate (MMA) as the monomers was studied. And the effects of different polymerization technological parameters, such as the comonomer, initiator, crosslinker, emulsifier, dispersant agent, and the agitation rate, on the oil absorbency of high oil‐absorption resins were discussed in detail. The optimum polymerization conditions were obtained. With the increasing contents of these factors, the oil absorbency increased first, and then decreased. The highest oil absorbency to toluene was 17.6 g/g. The particle morphology of the high oil‐absorption resins was observed by scanning electron microscopy (SEM). The resins were determined by FTIR spectrometry. Compared with the high oil‐absorption resins prepared by suspension polymerization process and emulsion polymerization process, the high oil‐absorption resins prepared by suspended emulsion polymerization process had the higher oil absorbency, faster oil‐adsorbing rate, better oil‐retention, and regeneration property. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and characterization of conducting poly(aniline‐co‐o‐aminophenethyl alcohol)s

Poly(o‐aminophenethyl alcohol) and its copolymers containing the aniline unit were synthesized in aqueous hydrochloric acid medium by chemical oxidative polymerization. The chemical composition of these novel polymers was determined spectroscopically, and their viscosities were measured. These polymers exhibit good solubility in organic solvents that is attributed mainly to the polar hydroxyethyl side groups. Their structures (chain conformation and morphological structure) and properties (conductivity, electrochemical characteristics, glass transition, and degradation behavior) were characterized and then interpreted on the basis of the chemical composition along with the electronic and steric hindrance effects associated with the hydroxyethyl side group. Overall, the side group has a significant effect on the polymerization and influences the structure, chain conformation, and properties of the resultant polymer. The poly(aniline‐co‐o‐aminophenethyl alcohol)s containing 20–40 mol % o‐aminophenethyl alcohol units are potential conducting materials for microelectronic and electromagnetic shielding applications because they are easier to process than polyaniline but retain its beneficial properties. These polymers can also be used as a functional conducting polymer intermediate owing to the reactivity of the side group. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 983–994, 2002     

β‐cyclodextrin‐based polymeric nano‐receptor: the self‐assembly of cyclodextrin‐appended comb‐copolymer

Well‐defined β‐cyclodextrin (β‐CD)‐appended biocompatible comb‐copolymer ethyl cellulose‐graft‐poly (ε‐caprolactone) (EC‐g‐PCL) was synthesized via the combination of ring‐opening polymerization (ROP) and click chemistry. The resulting products were characterized by ¹H NMR, FT‐IR spectroscopy, and GPC. The synthesized comb‐copolymer could assemble to micelles, with the surface covered by β‐CD. The inclusion with ferrocene derivation was investigated by cyclic voltammetric (CV) experiments, which indicated the potential application of the micelles as nano‐receptors for molecule recognization and controlled drug release. Copyright © 2011 John Wiley & Sons, Ltd.     

One‐step preparation of solution processable conducting polyaniline by inverted emulsion polymerization using didecyl ester of 4‐sulfophthalic acid as multifunctional dopant

A new one‐step method of preparation of solution processable conductive polyaniline (PANI) is reported using didecyl ester of 4‐sulfophthalic acid (DESPA) as multifunctional material. It consists of inversed emulsion polymerization of aniline in water/chloroform mixture with benzoyl peroxide initiator, maleic acid (MA) as a codopant and DESPA as protonating agent, surfactant, and plasticizer. The resulting product combines reasonable conductivity (ca.0.03 S/cm) with solubility in common solvents such as tetrahydrofuran and chloroform. Elemental analysis together with spectroscopic studies show that the protonation level of emulsion polymerized PANI (0.47 per mer involving one ring and one nitrogen) is very close to that predicted for PANI in the oxidation state of emeraldine (0.5). MA is incorporated into the polymer matrix as a co‐dopant in the ratio 1:4 with respect to the DESPA dopant. PANI‐DESPA‐MA three components system shows a highly ordered, layer‐type supramolecular structure, in which planes of regularly π‐stacked PANI chains are separated by a double layer of dopants. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1051–1057, 2008     

Design of New Reaction Fields for Spherical Polypyrrole Particle Synthesis

Summary: Polypyrrole conducting polymers have been investigated widely for various applications because of their thermal and environmental stability and good electrical conductivity. Using chemical oxidative polymerization for the synthesis of polypyrrole particles, the reaction rate is very fast. In this study, we designed two new reaction fields for the synthesis of spherical polypyrrole nanoparticles. In the first system, oxidative polymerization of monomer droplets infused in a water/oil (W/O) emulsion reaction field was investigated. The second system employed dispersed monomer in an aqueous solution with a low concentration of oxidant in which polymerization was augmented by ultrasonic irradiation. Effective control of the reaction rate was important for enabling the synthesis of fine spherical polypyrrole particles.     

Polyurea nanocapsules obtained from nano‐emulsions prepared by the phase inversion temperature method

We describe here a new and simple method for preparation of polyurea nanocapsules from nanodroplets that were obtained by the phase inversion temperature (PIT) method. In the first stage, a nano‐emulsion was prepared, by a heating–cooling cycle, in which the oil phase contained an oil soluble monomer (toluene 2 , 4 ‐diisocyanate (TDI)). In the second stage, a water‐soluble monomer and crosslinker (diethylenetriamine (DETA)) was added, leading to formation of a polymeric shell by an interfacial polycondensation reaction. The new method was demonstrated for obtaining nanocapsules of about 100 nm, in which hexadecane, dodecane, or decane were the core materials, without using any special equipment. The morphology and structure of the nanocapsules were evaluated by attenuated total reflection Fourier transform infrared (ATR‐FTIR) measurements and electron microscopy. The thermal behavior of the nanocapsules containing hexadecane was studied by Differential Scanning Calorimetry (DSC) measurements, indicating that such nanocapsules can be utilized in thermal energy storage. Copyright © 2010 John Wiley & Sons, Ltd.