Low‐temperature tris(tert‐butyl 3‐oxo­butan­oato)­iron(III)

The low‐temperature (173 K) structure of the title complex, [Fe(C₈H₁₃O₃)₃], a metal–organic chemical vapour deposition (MOCVD) precursor, has been analyzed. The Fe atom is octahedrally coordinated and the three chelate rings are found to be significantly non‐planar, adopting a half‐chair conformation with the Fe atom out of the plane.     

Gas–liquid partition coefficients and Henry's law constants of methyl mercaptan in aqueous solutions of Fe(II)–CDTA chelate complex

Utilization of ferric chelate complex of trans-1,2-cyclohexanediaminetetraacetic acid (CDTA) for the oxidative scrubbing of H₂S and CH₃SH in Kraft mill streams can be beneficial from the standpoints of iron protection against precipitation and oxygen-mediated regenerative oxidation of the ferrous chelate CDTA. The physical solubility of methyl mercaptan in CDTA–Fe(III) complex cannot be measured directly because of oxidation of the sulfur-bearing gaseous species with the ferric chelate. Therefore, this investigation was carried out to determine the gas–liquid partition coefficients and Henry's law constants of methyl mercaptan in aqueous iron-free CDTA solutions and non-reacting ferrous chelate solutions (CDTA–Fe(II) complex), using the static headspace method with an estimated accuracy of about 2%. Experiments with aqueous solutions of chelate concentrations varying between 38 and 300 mol m⁻³ were carried out at temperatures between 298 and 333 K and atmospheric pressure. It was shown that the methyl mercaptan solubility decreases with increasing temperature for all systems but was not much influenced, in the studied conditions, by the chelate concentration especially at larger temperatures.     

Solubility of dimethyldisulfide (DMDS) in aqueous solutions of Fe(III) complexes of trans-1,2-cyclohexanediaminetetraacetic acid (CDTA) using the static headspace method

Total reduced sulfurs quartet (H₂S, CH₃SH, CH₃SCH₃ and CH₃S₂CH₃) is part of a well-known environmental problem afflicting pulp mills exploiting the Kraft mill sulfate-pulp process. Utilization of ferric chelate complex of trans-1,2-cyclohexanediaminetetraacetic acid (CDTA) for the oxidative scrubbing of H₂S and CH₃SH in Kraft mill streams is beneficial from the standpoints of iron protection against precipitation and oxygen-mediated regenerative oxidation of the ferrous chelate CDTA. The remaining two sulfur-bearing compounds, considered not oxidizable by CDTA–Fe(III), undergo only physical absorption in such solutions, so their solubility in aqueous CDTA–Fe(III) alkaline solutions is a crucial parameter for designing the complete scrubbing-absorption process. This investigation was carried out to determine the Henry's law constants of dimethyldisulfide (DMDS) in pure water, in aqueous iron-free CDTA solutions and CDTA–Fe(III) complex solutions using the static headspace method with an estimated accuracy of 2%. Experiments with aqueous solutions of chelate concentrations varying between 38 and 300 mol m⁻³ were carried out at temperatures between 298 and 333 K and atmospheric pressure. It was shown that DMDS solubility decreases with increasing temperature for all systems and is not much influenced by the CDTA concentration and solution pH.     

Influence of the Size of Aromatic Chelate Ligands on the Structures of Cadmium(II) Tetracarboxylates Polymers: From 2D Layered Network to 3D Metal‐Organic Framework

To determine the influence of the size of the aromatic chelate ligands on the frameworks of metal tretracarboxylate polymers, two new coordination polymers [Cd(btc)_0.5 (2,2′‐bpy)] ( 1 ) and [Cd(btc)_0.5(phen)]·H₂O ( 2 ) (H₄btc = biphenyl‐3,3′,4,4′‐tetracarboxylic acid, 2,2′‐bpy = 2,2′‐bipyridine, phen = 1,10‐phenanthroline) have been synthesized under similar hydrothermal conditions. In complex 1 , the dimeric Cd₂ units are linked by bridging btc^4? ligand to form a 2D layered network, whereas complex 2 possesses a 3D metal‐organic framework consisting of the dimeric Cd₂ units. The differences of two metal‐organic frameworks demonstrate that the size of the rigid aromatic chelate ligands have an important effect on the structures of their complexes. Additionally, the two complexes show strong fluorescence in the solid state at room temperature.     

Crystal structures of two copper(II) complexes with <Emphasis Type="Italic">N,N</Emphasis>-diethylbenzhydrazide

The copper(II) complexes with N,N-diethylbenzhydrazide, [Cu(C₆H₅CONHN(C₂H₅)₂)]Cl₂ (I) and Cu(C₆H₅CONN(C₂H₅)₂)₂ (II), have been studied by X-ray diffraction analysis. In the both compounds, the reactant acts as a bidentate (O, N(2)) ligand, forming five-membered chelate rings with copper. In cationic complex I, the O→Cu and N→Cu bond lengths are 1.954(2) and 2.070(3) Å, respectively, and the O(1)CuN(2) chelate angle is 81.89(10°. The Cl^? ions are in the coordination sphere of copper (Cu-Cl, 2.1974(11) and 2.2178(10) Å). The chelate ring has an envelope conformation with the copper atom in the flap position. The coordination polyhedron of the copper atom is a strongly distorted tetrahedron. Neutral complex II is an inner complex salt. The reactant forms with copper two planar chelate rings. The Cu-O and N→Cu bond lengths are 1.8901(9) and 2.0175(11) Å, respectively, and the O(1)CuN(2) chelate cycle is 83.70(4)°. Complex II is planar, and the coordination polygon of the copper atom is a parallelogram. The thermal stability of complexes I and II has been studied.     

Quantum-chemical modeling of the molecular structures of (555)macrotricyclic chelates in M(II) ion–thiooxamide–glyoxal ternary systems (M = Mn,Fe, Co,Ni, Cu,Zn)

The thermodynamic and geometric parameters of isomeric macrotricyclic Mn(II), Fe(II), Co(II), Ni(II), Cu(II), and Zn(II) complexes that can form upon the complexation of the corresponding hexacyanoferrates( II) with thiooxamide H₂N–C(=S)–C(=O)–NH₂ and glyoxal HC(=O)–CH(=O) in gelatin-immobilized matrices have been calculated by the OPBE/TZVP DFT method with the use of the Gaussian09 program package. It has been found that a complex with the MN₄ chelate core is most stable for M = Mn, Fe, Co, Ni, and Zn, and the MN₂S₂ core is most stable for M = Cu. Bond lengths and bond angles have been reported, and it has been noted that in all complexes, except the Zn(II) one, the chelate core and three fivemembered chelate rings are almost planar.     

Large‐ring P/O chelate nickel complex catalyzed oligomerization of ethylene to linear α‐olefins

1,1‐(Bicyclononyl‐9‐phosphino)hendecanoic acid and potassium 1,1‐(biscyclohexylphosphino)­hendecylate were synthesized. A model nickel complex [η³−C₈H₁₃]Ni[(C₈H₁₄)P(CH₂)₁₀COO] containing a 14‐membered chelate ring was also synthesized. The catalytic activity of this large chelate ring nickel complex for the oligomerization of ethylene was studied and compared with that of six‐membered ring chelate nickel complexes. The influence of the chelate ring was rationalized in terms of intramolecular rotation. The 14‐membered ring P/O chelate nickel complex was shown to have efficient catalytic activity for the oligomerization of ethylene to α‐olefins. Copyright © 2000 John Wiley & Sons, Ltd.     

Metal-acetylacetonate chelate crosslinked gels

Polymers containing pendant acetylacetonate (acac) groups suitable for crosslinking through metal complex formation are described. Diene-based copolymers, polystyrene, and polydimethylsiloxane, each containing a measurable number of acac groups distributed along the chains, were synthesized. The polymers were studied both for the amount of acac ligand and for their crosslinking reactions with selected transition metals by ultraviolet (UV) second-derivative spectroscopy. The UV analyses of the polymer systems were compared with their monomer analogs, and the results confirm that the crosslinking chelation reactions of polymer compounds are similar to those of model compounds. Homogeneous chelate crosslinking conditions were developed by using transition-metal salts such as Cu(laurate)₂, Fe(laurate)₃, and Cr(laurate)₃ in solvents such as chloroform and benzene. Polymeric ligands containing 1–5% acac in solution at various concentrations were reacted to form both inter- and intramolecular crosslinkages. The kinetic stability of the chelate crosslinks has been studied by a unique ligand exchange–gel solubility relationship.     

Thiosemicarbazone complexes of the platinum metals. A story of variable coordination modes

Salicylaldehyde thiosemicarbazone (H₂saltsc) reacts with [M(PPh₃)₃X₂] (M = Ru, Os; X = Cl, Br) to afford complexes of type [M(PPh₃)₂(Hsaltsc)₂], in which the salicylaldehyde thiosemicarbazone ligand is coordinated to the metal as a bidentate N,S-donor forming a four-membered chelate ring. Reaction of benzaldehyde thiosemicarbazones (Hbztsc-R) with [M(PPh₃)₃X₂] also affords complexes of similar type, viz. [M(PPh₃)₂(bztsc-R)₂], in which the benzaldehyde thiosemicarbazones have also been found to coordinate the metal as a bidentate N,S-donor forming a four-membered chelate ring as before. Reaction of the Hbztsc-R ligands has also been carried out with [M(bpy)₂X₂] (M = Ru, Os; X = Cl, Br), which has afforded complexes of type [M(bpy)₂(bztsc-R)]⁺, which have been isolated as perchlorate salts. Coordination mode of bztsc-R has been found to be the same as before. Structure of the Hbztsc-OMe ligand has been determined and some molecular modelling studies have been carried out determine the reason for the observed mode of coordination. Reaction of acetone thiosemicarbazone (Hactsc) has then been carried out with [M(bpy)₂X₂] to afford the [M(bpy)₂(actsc)]ClO₄ complexes, in which the actsc ligand coordinates the metal as a bidentate N,S-donorformingafive-membered chelate ring. Reaction of H₂saltsc has been carried out with [Ru(bpy)₂Cl₂] to prepare the [Ru(bpy)₂(Hsaltsc)]ClO₄ complex, which has then been reacted with one equivalent of nickel perchlorate to afford an octanuclear complex of type [Ru(bpy)₂(saltsc-H)₄Ni₄](ClO₄)₄.     

A new organopolymolybdate polymer for linking metal-organic moiety through Mo–N bonds

A new organopolymolybdate polymer, [Zn₂(H₂biim)₄(Hbiim)₂][H₂(γ-Mo₈O₂₆)]·8H₂O (1) (H₂biim?=?2,2′–biimidazole), was synthesized under hydrothermal conditions. In 1, H₂biim has chelate and linking roles. Three H₂biim chelate one Zn to form a cationic metal-organic subunit; two subunits link one octamolybdate through Mo–N bonds, forming a two-supporting anion. There are abundant π…π stacking interactions between these anions inducing a 1-D supramolecular chain. The electrochemical behavior and photoluminescence of 1 have been studied.     

Effect of Cu(II)/H2 Salen complex on the non-conventional initiated emulsion polymerization of acrylonitrile

Radical polymerization of acrylonitrile was carried out in an emulsifier-free condition initiated by KHSO₅ catalyzed with Cu(II)/bis-salicylidene ethylene diamine (H₂ Salen) complex. The Cu(II) salt alone, Cu(II)/salicylaldehyde and Cu(II)/ethylene diamine have a retarding effect on the polymerization reaction, while the chelate of Cu(II) with the tetradentate Schiff base ligand, H₂ Salen has a catalytic effect. Prior to this, the catalytic effect of various bivalent transition metal salts and their couple with the Schiff base, H₂ Salen on the polymerization reaction has been examined to be not significant. The in situ developed complex produces the stable emulsion leading to high conversion. In the polymerization, the variables studied were the concentration of monomer, initiator, Cu(II), H₂ Salen and temperature. The overall activation energy was computed to be 13.1 kcal/mol. From the kinetic and spectral analyses, the mechanism of the initiator decomposition and initiation of polymerization by Cu(II)/H₂ Salen complex were suggested. The rate of polymerization (R_p) was found to be dependent on the monomer, initiator, Cu(II) ion, H₂ Salen concentrations to the 1.4, 0.3, 1.6, 1.5 power respectively. The polymers are characterized by IR and molecular weight by viscosity and GPC methods.     

Chromium(III) chelate of deoxyalliin and its bioactivity

Chromium(III) chelate of deoxyalliin has been prepared and characterized using physical and spectral means and its bioactivity has been determined. FT-IR showed the coordination of amino and carboxylate groups of the amino acid to the metal. Elemental analysis, mass spectrometry, and TGA suggested its formula to be Cr(C₆H₁₀O₂NS)₃. UV-Vis spectroscopy and magnetic moment proved octahedral geometry. Conductivity measurement showed it to be a non-ionic compound. Bioactivity analysis showed that the complex is active against Gram-positive and Gram-negative bacteria and yeast as well.     

Synthesis, structure and spectral characterisation of a hydrogen-bonded polymeric manganese(III) Schiff base complex

A new hydrogen-bonded polymeric Mn(III) complex C₁₉H₂₀Mn₁N₃O₃S₁ (1) has been synthesised by conventional procedure with a new Schiff base ligand (2Z,3Z)-N ¹,N ²-bis(1-(2-hydroxyphenyl)ethylidene)ethane-1,2-diamine (H ₂ L) bearing a tetradentate N₂O₂ donor site. The complex has been characterised with several spectroscopic techniques like FT-IR, UV/Vis and EPR and also well supported by variable temperature magnetic susceptibility study. The structure of the co-ordination complex has been unequivocally confirmed from single crystal X-ray diffraction study. The redox stability of the metal chelate complex has been investigated with a slow scan cyclic voltammetry.     

Minimalistic Ditopic Ligands: An α‐S,N‐Donor‐Substituted Alkyne as Effective Intermetallic Conjugation Linker

The capability of donor‐substituted alkynes to link different metal ions in a side‐on carbon donor‐chelate coordination mode is extended from the donor centers S and P to the second period element N. The complex [Tp′W(CO)₂{η²‐C₂(S)(NHBn)}] (Tp′=hydrido‐tris(3,5‐dimethylpyrazolyl)borate, Bn=benzyl) bearing a terminal sulfur atom and a secondary amine substituent is accessible by a metal‐template synthesis. Subsequent deprotonation allowed the formation of remarkably stable heterobimetallic complexes with the [(η⁵‐C₅H₅)Ru(PPh₃)] and the [Ir(ppy)₂] moiety. Electrochemical and spectroscopic investigations (cyclic voltammetry, IR, UV/Vis, luminescence, EPR), as well as DFT calculations, and X‐ray structure determinations of the W–Ru complex in two oxidation states reveal a strong metal–metal coupling but also a limited delocalization of excited states.     

Preconcentration and separation of copper (II) with solvent extraction using N,N′-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane

Preconcentration and separation with solvent extraction of Cu(II) from aqueous solution using N,N′-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane (H₂L) as the new extractant has been studied. Separation of Cu(II) from other metal ions such as Cd(II), Ni(II), Zn(II), Pb(II), Cr(III), Co(II) and Mn(II) at aqueous solutions of various pH values and complexing agent H₂L, has been described. The possible extraction mechanism and the compositions of the extracted species have been determined. The separation factors for these metals using this reagent are reported while efficient methods for the separation of Cu(II) from other metal ions are proposed. From the loaded organic phase, Cu(II) stripping was carried out in one stage with different mineral acid solutions. The stripping efficiency was found to be quantitative in case of HNO₃ and HCl. From quantitative evaluation of the extraction equilibrium data, it has been deduced that the complex extracted is the simple 1:1 chelate, CuL. The extraction constant has a value of logK_ex=−4.05±0.04.     

Synthesis,characterization and cytotoxicity of new 2‐isonicotinoyl‐N‐phenylhydrazine‐1‐carbothioamide and its metal complexes

The reaction of the newly synthesized ligand, 2‐isonicotinoyl‐N‐phenylhydrazine‐1‐carbothioamide (H₃L), with acetate salt of Co (II), Cu (II),Ni (II) and Zn (II) led to isolation of four solid complexes. The ligand and complexes structure elucidation were based on elemental analyses, spectral analyses (IR, UV–Visible, ¹H and¹³C‐NMR, MS and ESR), TGA, molar conductivity and magnetic moments measurements. The results indicated that the ligand exists in the thioketo form, while on coordination to the metal ions; it behaves as mono‐negative bidentate chelate and exists in enol form. The optical band gap measurements of the ligand and its metal complexes are in the range 3.83–4.48 eV indicating their semi‐conducting character. The cytotoxicity examination of H₃L and its Zn (II) complex showed that the ligand have very strong cytotoxicity against both HCT‐116 and HEPG‐2 cell lines while, Zn (II) complex has moderate activity.     

Metal chelates in vinyl polymerization. I. Ferric dipivaloylmethide as an initiator

The behavior of the chelate, ferric dipivaloylmethide, Fe(DPM)₃, in vinyl polymerization systems was investigated. The polymerization was found to be of free-radical nature. The rate of polymerization was proportional to the square root of the concentration of the chelate. The monomer exponent was close to 1.5 for the Fe(DPM)₃-initiated polymerization of styrene and methyl methacrylate. The kinetic and transfer constants and activation energies for these systems have been evaluated. Spectral studies revealed the possibility of a complex formation between the chelate and the monomer. A kinetic scheme for the Fe(DPM)₃-initiated polymerization is derived based on this initial complex formation.     

Synthesis,IR-spectroscopic study and crystal structure of tris(benzohydrazide)nickel(II) dichloride dihydrate [Ni(L)<Subscript>3</Subscript>]Cl<Subscript>2</Subscript> · 2H<Subscript>2</Subscript>O

Coordination compound [Ni(L)₃]Cl₂ · 2H₂O (L is benzohydrazide) has been synthesized and studied by IR spectroscopy and X-ray diffraction analysis. According to X-ray diffraction, one of the Cl^– ions is disordered over two nonequivalent positions. The crystals are monoclinic, a = 15.423(3) Å, b = 9.697(2) Å, c = 18.893(4) Å, ß = 105.99(3)°, space group P2₁/c, Z = 4. The structural units of the crystal are complex cations [Ni(L)3]2+, in which ligands L are coordinated to the central atom bidentately chelating the metal atoms through the O and N atoms of the hydrazide moiety (Ni–O 2.036(4), 2.051(5), 2.047(5); Ni–N 2.095(5), 2.089(6), 2.097(6) Å). The structural units of the crystal are joined together by cation–anion electrostatic interactions and hydrogen bonds, which involve both H₂O molecules, both Cl^– anions and the N atoms of chelate rings of the complex cation.     

Complexation of TiF<Subscript>4</Subscript> with PhP(O)[CH<Subscript>2</Subscript>C(O)NMe<Subscript>2</Subscript>]<Subscript>2</Subscript> in CH<Subscript>2</Subscript>Cl<Subscript>2</Subscript>: Appearance of a Chiral Center at Chelate Coordination

The reaction of TiF₄ with PhP(O)[CH₂C(O)NMe₂]₂ in CH₂Cl₂ has been studied by ¹⁹F NMR spectroscopy. It has been found that the major reaction products are chelate tetrafluoro complex (η²-L)TiF₄ where the ligand is coordinated to the titanium ion through the P=O and C=O groups and cis-TiF₄(ОР···L)₂ where both ligands are coordinated to the central ion through the more basic P=O groups. Spectral features of the tetrafluoro chelate have been studied, which have been attributed for the first time to the appearance of a chiral center at chelate coordination. The character of manifestation of conformational isomerism of the chelate ring and chiral center in the chelating ligand in mixed octahedral complexes of d⁰ transition metal fluorides in ¹⁹F NMR spectra is discussed.     

Synthesis,spectral, and biological studies of transition metal chelates of N-[1-(3-aminopropyl)imidazole]salicylaldimine

Tridentate chelate complexes M[LX?·?2H₂O], where M?=?Co(II), Ni(II), Cu(II), Zn(II), and Cd(II) have been synthesized from the Schiff base L?=?N-[1-(3-aminopropyl)imidazole]salicylaldimine and X?=?Cl. Microanalytical data, UV-Vis, magnetic susceptibility, IR, ¹H-NMR, mass, and EPR techniques were used to confirm the structures. Electronic absorption spectra and magnetic susceptibility measurements suggest square-planar geometry for copper complex and octahedral for other metal complexes. EPR spectra of copper(II) complex recorded at 300?K confirm the distorted square-planar geometry of the copper(II) complex. Biological activities of the ligand and metal complexes have been studied on Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Candida albicans by the well diffusion method. The activity data show the metal complexes to be more potent than the parent ligand against two bacterial species and one fungus. The electrochemical behavior of the copper complex was studied by cyclic voltammetry.