Radical copolymerization of N‐phenylmaleimide and diene monomers in competition with diels–alder reaction

Radical copolymerization of N‐phenylmaleimide (PhMI) is carried out with various diene monomers including naturally occurring compounds and the copolymers are efficiently produced by the suppression of Diels–Alder reaction as the competitive side reaction. Diene monomers with an exomethylene moiety and a fixed s‐trans diene structure, such as 3‐methylenecyclopentene and 4‐isopropyl‐1‐methyl‐3‐methylenecyclohexene, exhibit high copolymerization reactivity to produce a high‐molecular‐weight copolymer in a high yield. The copolymerization of sterically hindered noncyclic diene monomers, such as 2,4‐dimethyl‐1,3‐pentadiene and 2,4‐hexadiene, also results in the formation of a high‐molecular‐weight copolymer in a moderate yield. The NMR spectroscopy reveals that the obtained copolymers consist of predominant 1,4‐repeating structures for the corresponding diene unit. The copolymers have excellent thermal stability, that is, an onset temperature of decomposition over 330 °C and a glass transition temperature over 130 °C. The copolymerization reactivity of these diene monomers is discussed based on the results of the DFT calculations. The efficient copolymer formation in competition with Diels–Alder addition is investigated under various conditions of the temperature, solvents, and initiators used for the copolymerization. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3616–3625.     

Morphological investigation of styrene and acrylamide polymer microspheres prepared by dispersion copolymerization

 The morphology of the styrene and acrylamide copolymer microspheres prepared by dispersion copolymerization in an ethanol/water medium was investigated. The effects of the styrene/acrylamide ratio, ethanol/water ratio and stabilizer concentration on the particle size and size distribution were studied. It was found that the initial solubility parameter of the system was the key factor in the process. The comonomer acrylamide also played an important role in the particle size and size distribution in the presence of cross-linking agent (divinylbenzene). Received: 29 October 1999 Accepted in revised form: 29 November 1999     

Radical copolymerization of cyclic diarsine with vinyl monomers

1,2,4,5‐Tetramethyltetrahydrodiarsenine ( 1 ), a cyclic diarsine compound, was stirred with styrene and a catalytic amount of 2,2′‐azobisisobutyronitrile (AIBN) as a radical initiator at 80 °C for 8 h in toluene to give a copolymer containing arsenic atoms in the backbone. The gel permeation chromatography (GPC) chromatogram of the copolymer showed a single peak. The number‐average molecular weight of the copolymer was estimated to be more than 10,000 by GPC analysis (CHCl₃, polystyrene standards). The structure of the copolymer was confirmed by the ¹H NMR and ¹³C NMR spectra. According to the integral ratio of peaks in the ¹H‐NMR spectrum, the content of 1 in the copolymer was smaller compared to the monomer feed ratio of 1 . Radical copolymerization of 1 with methyl methacrylate also provided the corresponding copolymer in the presence of AIBN, whereas copolymerization with vinyl acetate yielded no polymeric material. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3023–3028, 2004     

Poly(N,N‐diethylacrylamide) microspheres by dispersion polymerization

Poly(N,N‐diethylacrylamide)‐based microspheres were prepared by ammonium persulfate (APS)‐initiated and poly(vinylpyrrolidone) (PVP)‐stabilized dispersion polymerization. The effects of various polymerization parameters, including concentration of N,N′‐methylenebisacrylamide (MBAAm) crosslinker, monomer, initiator, stabilizer and polymerization temperature on their properties were elucidated. The hydrogel microspheres were described in terms of their size and size distribution and morphological and temperature‐induced swelling properties. While scanning electron microscopy was used to characterize the morphology of the microspheres, the temperature sensitivity of the microspheres was demonstrated by dynamic light scattering. The hydrodynamic particle diameter decreased sharply as the temperature reached a critical temperature ～ 30 °C. A decrease in the particle size was observed with increasing concentration of both the APS initiator and the PVP stabilizer. The microspheres crosslinked with 2–15 wt % of MBAAm had a fairly narrow size distribution. It was found that the higher the content of the crosslinking agent, the lower the swelling ratio. High concentration of the crosslinker gave unstable dispersions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6263–6271, 2008     

Dispersion copolymerization of styrene and other vinyl monomers in polar solvents

Dispersion polymerization is a very attractive method for preparing micrometer‐size monodisperse polymer particles. The applications of microspheres have been greatly expanded by the use of copolymers. Here, the dispersion copolymerization of styrene and seven other vinyl monomers was carried out in polar solvents. The effect of the different comonomers on the particle size was systematically investigated. The particle size first decreased and then increased with an increasing fraction of acrylamide in the monomer feed, and at a higher fraction of such a comonomer, only a gel‐like polymer was obtained. The particle size also increased with the increase in the contents of the hydrophilic comonomers in the monomer mixtures, and the copolymer molecular weight decreased meanwhile. Although the amount of the hydrophobic comonomer in the monomer mixture changed, the particle size was hardly affected. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 555–561, 2001     

Fundamental investigations into the free‐radical copolymerization of N‐phenylmaleimide and norbornene

A fundamental investigation into the copolymerization of N‐phenylmaleimide and norbornene via conventional free‐radical polymerization techniques was conducted. Reaction conditions were optimized for molecular weight and percent yield by tuning overall concentration and initiator loading. The copolymerization kinetics were monitored using in‐situ, variable temperature nuclear magnetic resonance and first‐order behavior was observed with respect to each monomer. Although the related copolymerization of norbornene and maleic anhydride was well‐known to proceed in a perfectly alternating manner, the copolymerization of norbornene and N‐phenylmaleimide was found to deviate from strictly alternating copolymerization behavior, producing significant amounts of sequentially enchained N‐phenylmaleimide units within the polymeric backbone. This deviation from perfectly alternating behavior was confirmed by analysis of individual monomer conversion rates and by measurement of monomer reactivity ratios using the Mayo–Lewis graphical analysis method. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 985–991     

Cationic copolymerization behavior of cyclic ether monomers with norbornene‐containing cyclic carbonate or spiro–orthoether structure

Cationic ring‐opening copolymerizations of various cyclic ether compounds with volume expanding monomers bearing norbornene backbones [norbornene‐spiro orthocarbonate (N‐SOC) and norbornene‐cyclic carbonate (N‐CC)] were carried out in the presence of a thermally latent initiator 1 . The 10% weight loss decomposition temperatures (T_d10) and the volume changes on the copolymerizations were measured for these resultant products. In the comparison between copolymerizations of bifunctional epoxide 2 with N‐SOC and with N‐CC, it was found that N‐CC served as a more useful volume controllable comonomer than N‐SOC. The copolymerizations with N‐CC yielded the products with a decrease in the volume change (volume shrinkage) and with an increase in the monomer feed ratio of N‐CC; T_d10 was relatively similar to the homopolymer of epoxide 2 and was observed except when the proportion of N‐CC was more than 20% in the monomer feed ratio of N‐CC. In contrast, similar copolymerizations with N‐SOC did not exhibit such tendencies, probably because of the low efficiency of the copolymerization derived from the low miscibility of N‐SOC for the epoxide. The other copolymerization systems of other bi‐ and monocyclic ether compounds ( 3 – 6 and phenyl glycidyl ether) with N‐CC also indicated an almost similar tendency toward that of the copolymerization with epoxide 2 . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5113–5120, 2004     

Electroinduced oxidative copolymerization of N‐vinyl carbazole with methyl ethyl ketone formaldehyde resin

In this study, a novel procedure to obtain the non‐crosslinked, photoconductive, white form of the linear copolymer of N‐vinyl carbazole (NVCz) and methyl ethyl ketone formaldehyde resin (MEKF‐R) is reported. A possible mechanism of copolymerization is suggested. The yield of the copolymer is increased almost 10 times by the addition of catalytic amounts of ceric ammonium nitrate as an oxidant during the electrochemical polymerization of NVCz in the presence of MEKF‐R in a divided electrochemical cell. Since cerium(III) is readily oxidized to cerium(IV) at the anode, the concentration of cerium(IV) remained constant and the deposition of green poly(NVCz) can be prevented. Copyright © 2004 John Wiley & Sons, Ltd.     

Stabilizer‐free dispersion copolymerization of maleic anhydride and vinyl acetate. I. Effects of principal factors on microspheres

A novel dispersion copolymerization of maleic anhydride (MAn) and vinyl acetate (VAc) without adding stabilizer is developed, which gives uniform copolymer microspheres with tunable sizes. Some principal factors affecting the microspheres, such as reaction time, monomer concentration and feed ratio, reaction media, and cosolvent, were investigated. It was found that the stabilizer‐free dispersion copolymerization of MAn and VAc is a rapid process, and the particle size grows in accordance with the evolution of polymerization. The chemical composition of the copolymer microspheres was characterized by FT‐IR and ¹³C NMR spectroscopies. Over a wide range of monomer concentrations, the microspheres can always be formed and stably dispersed, with uniform sizes ranging from 180 nm to 740 nm. The yield of copolymer microspheres reaches a maximum at 1:1 feed ratio of MAn to VAc, owing to the alternating copolymerization between the binary monomers by a known charge‐transfer‐complex mechanism. However, the diameter of microspheres drastically increases when MAn content is enhanced. Only some specific alkyl ester solvents, such as n‐butyl acetate, isobutyl acetate, n‐amyl acetate, are desirably fit for this unique stabilizer‐free dispersion polymerization. Furthermore, we found that when some acetone is added as a cosolvent, the copolymer microspheres can still be formed, with much larger diameters. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3760–3770, 2005     

Preparation of micron-size monodisperse polymer particles by dispersion copolymerization of styrene with poly(2-oxazoline) macromonomer

This article describes the preparation of micron-size monodisperse polymer particles by dispersion copolymerization of styrene with a poly(2-oxazoline) macromonomer in an aqueous ethanol solution. The macromonomer acted as a comonomer as well as a stabilizer. The diameter of the particles increased as the concentration of the macromonomer decreased. The higher the molecular weight of the macromonomer, the smaller the particle size. The copolymerization in the solvent containing higher water content gave smaller polymer particles. Under the condition giving the monodisperse particles, the particles volume increased linearly with the yield of the particles. From ESCA analysis of the particle surface, poly(2-oxazoline) chains were enriched on the surface. © 1993 John Wiley & Sons, Inc.     

Synthesis of cyclic olefin polymers with high glass transition temperature by ring‐opening metathesis copolymerization and subsequent hydrogenation

Novel cyclic olefin polymers (COPs) derived from bulky cyclic olefin, exo‐1,4,4a,9,9a,10‐hexahydro‐9,10(1′,2′)‐benzeno‐l,4‐methanoanthracene (HBMN), with high glass transition temperature (T_g), excellent thermal stability, high transparency, and improved mechanical performance, have been achieved by ring‐opening metathesis polymerization and subsequent hydrogenation. The “first‐generation Grubbs” catalyst, RuCl₂(PCy₃)₂(CHPh) (Cy = cyclohexyl) ( G1 ), displays very high activity for homo/copolymerization with complete conversion. Homopolymer of the HBMN after complete hydrogenation showed a highest T_g of 223.6 °C. Copolymerization of HBMN with tricyclo[4.3.0.12,5]deca‐3‐ene or 5‐n‐hexylnorbornene was also carried out. These two series of COPs were characterized by gel permeation chromatography, nuclear magnetic resonance, differential scanning calorimetry, and thermogravimetric analysis. The T_g of the resulted COPs linearly increased with HBMN content, which is easily controlled by changing feed ratios. The tensile test indicates that these copolymers have good mechanical performance as all these copolymers show a higher strain at break compared with commercial products (TOPAS^®). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2654‐2661     

Novel acrylic macromonomer with amphiphilic character derived from Triton X‐100: Radical copolymerization with methyl methacrylate and thermal properties

This article explores the synthesis of a novel methacrylic macromonomer with an amphiphilic character derived from poly(ethylene glycol) tert‐octylphenyl ether (MT) and its respective homopolymer. To know their reactivity in radical copolymerization reactions with methyl methacrylate (MMA), a model monomer (MTm) was synthesized to determine the reactivity ratios and compare them with the low molar fractions of copolymers of MT with MMA because they were difficult to isolate. They were r_MTm = 0.97 and r_MMA = 0.95. The compositional diagrams when representing the weight fraction of MT and MTm in the feed and the copolymer suggested that a clear correlation exists between the experimental points of the model monomer MTm and the macromonomer MT ones, suggesting that the length of the side poly(ethylene oxide) chain does not affect the reactivity of the methacrylic double bond in the prepared monomers for this type of polymerization reaction. The reactivity ratios of the copolymers have a tendency for the formation of random or Bernoullian copolymers. The glass‐transition temperatures (T_g's) of the prepared copolymers were determined by differential scanning calorimetry, deviated from the Fox equation, and discussed on the basis of treatments that consider the influence of the monomeric units along the copolymer chains, determining the T_g of the corresponding alternating dyads. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1641–1649, 2003     

Novel dialkyl vinyl ether phosphonate monomers: Their synthesis and alternated radical copolymerizations with electron‐accepting monomers

Three new vinyl ether monomers containing phosphonate moieties were synthesized from transetherification reaction. We showed that the yield was dependent on the spacer length between the vinyl oxy group and the phosphonate moieties: when the spacer is a single methylene side reaction may occur, leading to the formation of acetal compounds. Free‐radical copolymerizations of phosphonate‐containing vinyl ether monomers with maleic anhydride were carried out, leading to alternated copolymers of rather low molecular weights (from 1000 to 7000 g/mol). Both gel permeation chromatography and ³¹P NMR analyses enhanced possible intramolecular transfer reactions occurring from the phosphonate moieties. Kinetic investigation showed that the electron‐withdrawing character of the phosphonate moieties tends to decrease the rate of copolymerization. Nevertheless, almost complete monomers conversion was reached after 30 min of reaction with dimethyl vinyloxyethylphosphonate (VEC₂PMe). Then, radical copolymerization of VEC₂PMe with a series of electron‐accepting monomers, that is, dibutyl maleate, dibutylitaconate, itaconic anhydride, butyl maleimide, and methyl maleimide, led to a series of alternated copolymers. From kinetic investigation, we showed that the higher the electron‐accepting effect, the faster the vinyl ether consumption and the higher the molecular weights. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Effect of lithium perchlorate on the spontaneous copolymerization of 4‐vinylpyridine with various electron‐rich vinyl monomers

The spontaneous copolymerization of 4‐vinylpyridine (4‐VP) activated with lithium perchlorate (LiClO₄) with various electron rich monomers (p‐methoxystyrene, MeOSt; p‐methylstyrene, MeSt; styrene, St) was investigated in various solvent systems at 75°C. Increasing the LiClO₄ concentration and the nucleophilicity of the electron rich monomer increased the copolymer yields. Both ¹H‐NMR and elemental analysis confirmed the almost 1:1 copolymer structure for VP/MeOSt system which possessed high molecular weight and narrow polydispersity (PDI). Compared to 4‐VP activated with zinc chloride, LiClO₄ systems showed slightly lower yields and much narrower PDI. We also investigated the spontaneous copolymerization of 4‐VP activated with various protic acids in the reaction with various electron rich comonomers. However, generally protic salt forms showed less solubility in organic solvents and showed low molecular weight polymer products with low yields. The proposed initiation mechanism exhibits the formation of a σ‐bond between the β‐carbons of the two donor‐acceptor monomers, creating the 1,4‐tetramethylene biradical intermediate initiating the copolymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1709–1716, 1999     

Preparation and characterization of poly(2‐hydroxyethylme thacrylate)‐b‐P(N‐phenylmaleimide)‐ZnO and poly(2‐hydroxy ethylmethacrylate)‐b‐P(styrene)‐ ZnO micro/nanostructures: micro/nanocomposite particles with core‐shell morphology

The present work reports the incorporation of the ZnO doped diblock copolymer matrix and its conversion into a self‐assembled structure. The diblock P(HEMA)₈₀‐b‐P(N‐PhMI)₂₀ and P(HEMA)₉₀‐b‐P(St)₁₀ copolymers consist of a majority (HEMA) and minority (N‐PhMI or St) block. The copolymers were synthesized with a block repeat unit ratio by atom‐transfer radical polymerization (ATRP) using a poly(2‐hydroxyethylmethacrylate)‐Cl/CuBr/bipyridine initiating system. The P(HEMA)‐Cl was prepared by reverse ATRP¹. The average theoretical number molecular weight (M_n,th) was calculated from the feed capacity. The composite of the inorganic nanoparticles was achieved at room temperature in the liquid phase, using ZnCl₂ precursor dopant and wet chemical processing to convert to ZnO nanoparticle films. Thermal characterization was performed using differential scanning calorimetry (DSC) and thermogravimetry (TG). The proton/area relationship confirmed the block copolymer compositions calculated by elemental analysis, consisting of a majority and minority blocks. Morphology properties of the polymer samples were investigated by scanning electron microscopy (SEM). The microphotographs of the film's surfaces show that the film's upper surfaces were generally smooth with ordered structure morphology. FT‐IR spectroscopy confirmed the association of the ZnCl₂ precursor with the majority block and the formation of ZnO, the white SEM showed the morphology of ZnO nanoparticles' films when the surface relief changes principally due to surface loss rather than its orientation. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of novel cyclic olefin polymers with excellent transparency and high glass‐transition temperature via gradient copolymerization of bulky cyclic olefin and cis‐cyclooctene

Novel cyclic olefin polymers (COPs) with excellent transparency and high glass‐transition temperature (T_g) synthesized from bulky norbornene derivative, exo‐1,4,4a,9,9a,10‐hexahydro‐9,10(1',2')‐benzeno‐l,4‐methanoanthracene (HBMN), and cis‐cyclooctene (COE) by ring‐opening metathesis copolymerization utilizing the “first‐generation Grubbs” catalyst, RuCl₂(PCy₃)₂(CHPh), and subsequent hydrogenation was reported herein. To get amorphous copolymers, it was of great importance to control the feed ratios and the polymerization time for gradient copolymerization. All these copolymers showed very high T_gs (141.1–201.2 °C), which varied with the content of HBMN. The films of the gradient copolymers with only one T_g were highly transparent. On the contrary, all the block copolymers synthesized through sequential addition showed two thermal transition temperatures, T_g and melt temperature (T_m), and the films of these block copolymers were opaque. The mechanical performances of the COPs were also investigated. It is the first report that transparent COP could be prepared from bulky norbornene derivative and monocyclic olefin. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3240–3249