Radical addition fragmentation chain transfer (RAFT) polymerization of ferrocenyl (Meth)acrylates

We report on the controlled free radical homopolymerization of 1‐ferrocenylethyl acrylate as well as of three new ferrocene bearing monomers, namely 4‐ferrocenylbutyl acrylate, 2‐ferrocenylamido‐2‐methylpropyl acrylate, and 4‐ferrocenylbutyl methacrylate, by the RAFT technique. For comparison, the latter monomer was polymerized using ATRP, too. The ferrocene containing monomers were found to be less reactive than their analogues free of ferrocene. The reasons for the low polymerizability are not entirely clear. As the addition of free ferrocene to the reaction mixture did not notably affect the polymerizations, sterical hindrance by the bulky ferrocene moiety fixed on the monomers seems to be the most probable explanation. Molar masses found for 1‐ferrocenylethyl acrylate did not exceed 10,000 g mol^?1, while for 4‐ferrocenylbutyl (meth)acrylate molar masses of 15,000 g mol^?1 could be obtained. With PDIs as low as 1.3 in RAFT polymerization of the monomers, good control over the polymerization was achieved. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Successive SET‐LRP and ATRP synthesis of ferrocene‐based PPEGMEA‐g‐PAEFC well‐defined amphiphilic graft copolymer

A series of ferrocene‐based well‐defined amphiphilic graft copolymers, consisting of hydrophilic poly[poly(ethylene glycol) methyl ether acrylate] (PPEGMEA) backbone and hydrophobic poly(2‐acryloyloxyethyl ferrocenecarboxylate) (PAEFC) side chains were synthesized by successive single‐electron‐transfer living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was prepared by SET‐LRP of PEGMEA macromonomer, and it was then treated with lithium di‐isopropylamide and 2‐bromopropionyl bromide at ?78 °C to give PPEGMEA‐Br macroinitiator. The targeted well‐defined graft copolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.32) were synthesized via ATRP of AEFC initiated by PPEGMEA‐Br macroinitiator, and the molecular weights of the backbone and side chains were both controllable. The electro‐chemical behaviors of graft copolymers were studied by cyclic voltammetry, and it was found that graft copolymers were more difficult to be oxidized, and the reversibility of electrode process became less with raising the content of PAEFC segment. The effects of the preparation method, the length of hydrophobic PAEFC segment, and the initial water content on self‐assembly behavior of PPEGMEA‐g‐PAEFC graft copolymers in aqueous media were investigated by transmission electron microscopy. The morphologies of micelles could transform from cylinders to spheres or rods with changing the preparation condition and the length of side chains. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Spacer‐length‐dependent association in polymers with multiple‐hydrogen‐bonded end groups

Herein, we investigate the influence of spacer length on the homoassociation and heteroassociation of end‐functionalized hydrogen‐bonding polymers based on poly(n‐butyl acrylate). Two monofunctional ureido‐pyrimidinone (UPy) end‐functionalized polymers were prepared by atom transfer radical polymerization using self‐complementary UPy‐functional initiators that differ in the spacer length between the multiple‐hydrogen‐bonding group and the chain initiation site. The self‐complementary binding strength (K_dim) of these end‐functionalized polymers was shown to depend critically on the spacer length as evident from ¹H NMR and diffusion‐ordered spectroscopy. In addition, the heteroassociation strength of the end‐functionalized UPy polymers with end‐functionalized polymers containing the complementary 2,7‐diamido‐1,8‐naphthyridine (NaPy) hydrogen‐bond motif is also affected when the aliphatic spacer length is too short. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Enzymatic‐ and light‐degradable hybrid nanogels: Crosslinking of polyacrylamide with acrylate‐functionalized Dextrans containing photocleavable linkers

Enzymatically cleavable and light‐degradable hybrid nanogels were prepared by free radical inverse miniemulsion copolymerization of acrylamide (AAm) with a newly synthesized functional dextran crosslinker containing acrylate moieties attached to the backbone via a photolabile linker, that is, dextran‐photolabile linker‐acrylate (Dex‐PL‐A). The Dex‐PL‐A/AAm feed ratio was systematically varied to investigate the influence of the particle composition on the gel properties. The resulting hydrogel nanoparticles were examined with regard to their degradation behavior upon the appliance of the two orthogonal stimuli by turbidity measurements in combination with dynamic light scattering. Although continuous photolytic cleavage of the photolabile linkers between polyacrylamide chains and dextran molecules was found to proceed fast and quantitatively yielding completely disintegrated networks, stepwise irradiation resulted in partial degradation of crosslinking points. Thus, nanogels of a desired specific degree of swelling (DGS) can be obtained by adjusting the irradiation time accordingly. Partial enzymatic cleavage of the dextran backbones of the Dex‐PL‐A crosslinking molecules resulted in an increase in the DGS of the nanogels up to a constant value. Subsequent irradiation of those swollen hydrogel particles was used to fully degrade the network structure in a second step. Hence, a two‐step degradation profile was realized by the combination of the two orthogonal stimuli. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Synthesis and polymerization of phosphorus‐containing acrylates

Novel phosphorus‐containing acrylate monomers were synthesized by two different routes. The first involved the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with diethylphosphonoacetic acid. The monomers were bulk‐ and solution‐polymerized at 56–64 °C with 2,2′‐azobisisobutyronitrile. The ethyl ester monomer showed a high crosslinking tendency under these conditions. The selective hydrolysis of the ethyl ester phosphonic ester compound was carried out with trimethylsilyl bromide, producing a phosphonic acid monomer. In the second route, ethyl α‐hydroxymethyl acrylate and t‐butyl α‐hydroxymethyl acrylate were reacted with diethylchlorophosphate. The bulk homopolymerization and copolymerization of these monomers with methyl methacrylate and 2,2′‐azobisisobutyronitrile gave soluble polymers. The attempted hydrolysis of the monomers was unsuccessful because of the loss of the diethylphosphate group. The relative reactivities of the monomers in the photopolymerizations were also compared. The ethyl α‐hydroxymethyl acrylate/diethylphosphonic acid monomer showed higher reactivity than the other monomers, which may explain the crosslinking during the polymerization of this monomer. The reactivities of other derivatives were similar, but the rates of polymerization were slow in comparison with those of methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3221–3231, 2002     

Main chain 1,1′‐ferrocene‐containing polyelectrolytes exhibiting thermotropic liquid‐crystalline and fluorescent properties

A series of 1,1′‐ferrocene‐containing polyelectrolytes ( 3, 4 ) were prepared when 1,1′‐bis(N,N‐dimethylaminomethyl)ferrocene ( 1a ) or 1, 1′‐bis{[1‐(2‐methyl)imidazol‐1‐yl]methyl}ferrocene ( 1b ) was quaternized with 1,4‐dibromobutane or α, α′‐dibromo‐p‐xylene. The counterion was bromide or bis(trifluoromethanesulfonyl)‐amide formed after metathesis with the lithium salt. Their chemical structures were determined by IR and NMR spectra. Molecular weights in the range of ～5400 ( 4a )– ～14,700 ( 4c ) for number‐average molecular weights (M_n) over narrow molecular weight distributions were determined for polymers 4 by gel permeation chromatography. Thermal properties of these materials were obtained by differential scanning calorimetry and thermogravimetric analysis that showed the polymers had thermal stabilities ranging between 172 and 330 °C. Liquid‐crystalline behavior was investigated on a hot stage polarizing optical microscope. Polymers 3a , 4b , and 4d formed either a high‐order or a low‐order smectic phase above their melting or fusion temperatures, and exhibited smectic‐to‐isotropic transitions. The ranges of the liquid‐crystalline phases for these materials were 22, 46, and >55 °C. Compounds 3b , 4a , and 4c are crystalline before melting or decomposing. All of the polymers exhibited absorption bands at ～430 nm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 974–983, 2005     

Double-stranded ladderphanes with C2-symmetric planar chiral ferrocene linkers

Eight ladderphanes with C₂-symmetric planar chiral ferrocene linkers are synthesized by ring opening metathesis polymerization of bisnorbornene monomers using Grubbs-I catalyst. The aminobenzoate in both monomers and polymers shows absorption maximum around 320 nm. Both monomers and polymers are Circular dichroism (CD) active. Little enhancements of CD profiles around 320 nm are observed for ladderphanes having chiral chloro- or phenyl-substituted ferrocene linkers. However, ladderphanes with a phenyl substituent on the cyclopendienyl ring exhibits enhancement of CD curves aound 240–300 nm. The congested phenyl moieties in adjacent linkers in this polymer might be well oriented such that interactions between these aromatic substituents on different monomeric units might provoke the enhancement of the CD curves in this region. When the methyl-substituted cyclopendienyl ligand is used for chiral ferrocene linkers, the ladderphanes exhibit two-fold enhancement of CD spectrum around 320 nm. This enhancement is further increased when the cyclopentadienyl ligand contains an additional phenyl substituent, owing to exciton coupling between aminobenzoate moieties in adjacent monomeric units. Moreover, the intensity of the CD curves in the region of 240–300 nm is significantly increased. These results suggest that the later polymer may adopt a posible helical structure. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2999–3010     

Synthesis of well‐defined amphiphilic graft copolymer bearing poly(2‐acryloyloxyethyl ferrocenecarboxylate) side chains via successive SET‐LRP and ATRP

A series of well‐defined ferrocene‐based amphiphilic graft copolymers, consisting of poly(N‐isopropylacrylamide)‐b‐poly(ethyl acrylate) (PNIPAM‐b‐PEA) backbone and poly(2‐acryloyloxyethyl ferrocenecarboxylate) (PAEFC) side chains, were synthesized by the combination of single‐electron‐transfer living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). A new ferrocene‐based monomer, 2‐(acryloyloxy)ethyl ferrocenecarboxylate (AEFC), was prepared first and it can be polymerized via ATRP in a controlled way using methyl 2‐bromopropionate as initiator and CuBr/PMDETA as catalytic system in DMF at 40 °C. PNIPAM‐b‐PEA backbone was synthesized by sequential SET‐LRP of NIPAM and HEA at 25 °C using CuCl/Me₆TREN as catalytic system followed by the transformation into the macroinitiator by treating the pendant hydroxyls with α‐bromoisobutyryl bromide. The targeted well‐defined graft copolymers with narrow molecular weight distributions (M_w/M_n < 1.20) were synthesized via ATRP of AEFC initiated by the macroinitiator. The electro‐chemical behaviors of PAEFC homopolymer and PNIPAM‐b‐(PEA‐g‐PAEFC) graft copolymer were studied by cyclic voltammetry. Micellar properties of PNIPAM‐b‐(PEA‐g‐PAEFC) were investigated by transmission electron microscopy and dynamic light scattering. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4346–4357, 2009     

Synthesis of statistical and block copolymers containing adamantyl and norbornyl moieties by reversible addition‐fragmentation chain transfer polymerization

The synthesis of statistical and block copolymers, consisting of monomers often used as resist materials in photolithography, using reversible addition‐fragmentation chain transfer (RAFT) polymerization is reported. Methacrylate and acrylate monomers with norbornyl and adamantyl moieties were polymerized using both dithioester and trithiocarbonate RAFT agents. Block copolymers containing such monomers were made with poly(methyl acrylate) and polystyrene macro‐RAFT agents. In addition to have the ability to control molecular weight, polydispersity, and allow block copolymer formation, the polymers made via RAFT polymerization required end‐group removal to avoid complications during the photolithography. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 943–951, 2010     

Ferrocene‐Donor and 4,5‐Dicyanoimidazole‐Acceptor Moieties in Charge‐Transfer Chromophores with π Linkers Tailored for Second‐Order Nonlinear Optics

A series of new nonlinear optical chromophores ( 1 – 15 ) that were comprised of ferrocene‐donor and 4,5‐dicyanoimidazole‐acceptor moieties and various π linkers of different length were synthesized. Support for the presence of significant D ? A interactions in these NLO‐phores was obtained from the evaluation of the quinoid character of the 1,4‐phenylene moieties and their electronic absorption spectra, which featured intense high‐energy (HE) bands that were accompanied by less‐intense low‐energy (LE) bands. The redox behavior of these compounds was investigated by cyclic voltammetry (CV) and by rotating‐disc voltammetry (RDV); their electrochemical gaps decreased steadily from 2.64 to 2.09 V. In addition to the experimentally obtained data, DFT calculations of their absorption spectra, HOMO/LUMO levels, and second‐order polarizabilities (β) (?2ω,ω,ω) were performed. A structure–property relationship study that was performed by systematically altering the π linker revealed that the intramolecular charge‐transfer and nonlinear optical properties of these inorganic–organic hybrid D? π? A systems ( 1 – 15 ) were primarily affected by: 1) The presence of olefinic/acetylenic subunits; 2) the length of the π linker; and 3) the spatial arrangement (planarity) of the π linker.     

Photoinitiating monomers based on di‐ and triacryloylated hydroxylamine derivatives

The purpose of our study was to design a new class of acrylate‐based monomers with an UV‐cleavable heteroatom bond, offering the possibility to initiate radical polymerization upon irradiation with UV‐light. A method to derive the double bond conversion from the ATR‐IR spectra of the monomers and the cured polymers was employed, that enabled us to calculate the theoretical polymerization heats of the new monomers. Their photopolymerization properties were determined by Photo Differential Scanning Calorimetry. Surprisingly, some of these new compounds exhibited high photoinitiation activity, comparable to well‐established Type II photoinitiator systems like benzophenone/triethanolamine. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 392–403, 2009     

Synthesis of well‐defined pH‐responsive PPEGMEA‐g‐P2VP double hydrophilic graft copolymer via sequential SET‐LRP and ATRP

A series of well‐defined double hydrophilic graft copolymers containing poly(poly(ethylene glycol) methyl ether acrylate) (PPEGMEA) backbone and poly(2‐vinylpyridine) (P2VP) side chains were synthesized by successive single electron transfer living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was first prepared by SET‐LRP of poly(ethylene glycol) methyl ether acrylate (PEGMEA) macromonomer using CuBr/tris(2‐(dimethylamino)ethyl)amine as catalytic system. The obtained homopolymer then reacted with lithium diisopropylamide and 2‐chloropropionyl chloride at ?78 °C to afford PPEGMEA‐Cl macroinitiator. poly(poly(ethylene glycol) methyl ether acrylate)‐g‐poly(2‐vinylpyridine) double hydrophilic graft copolymers were finally synthesized by. ATRP of 2‐vinylpyridine initiated by PPEGMEA‐Cl macroinitiator at 25 °C using CuCl/hexamethyldiethylenetriamine as catalytic system via the grafting‐ from strategy. The molecular weights of both the backbone and the side chains were controllable and the molecular weight distributions kept relatively narrow (M_w/M_n ≤ 1.40). pH‐Responsive micellization behavior was investigated by ¹H NMR, dynamic light scattering, and transmission electron microscopy and this kind of double hydrophilic graft copolymer aggregated to form micelles with P2VP‐core while pH of the aqueous solution was above 5.0. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Embedding multiple site‐specific functionalities into polymer chains via nitrone‐mediated radical coupling reactions

A facile method to generate polymer materials with embedded functional groups at known and precise positions along the polymer backbone is described. In the presented approach, well‐defined bifunctional poly(isobornyl acrylate)s preformed via atom transfer radical polymerization (ATRP) containing α,ω‐bromo end groups are reactivated and subsequently coupled in a stepwise manner via the nitrone‐mediated radical coupling (NMRC) technique. The generated polymers contain on average four nitrone moieties at evenly spaced locations. The number of embedded functionalities, and thus, the size of the polymer is limited by disproportionation reactions occurring during the nitroxide termination sequence. Using the nitrone as a functional carrier, secondary functionalities can be incorporated into the polymer with ease. To exemplify such an approach, an alkyne‐functionalized nitrone is used to construct a multisegment structure via NMRC reactions followed by postmodification of the obtained polymers with 3‐mercaptopropionic acid via UV‐induced thiol‐yne reactions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of dendronized polymers through bergman cyclization of enediyne‐containing Frechet‐type dendrimers

In this article, dendronized polymers with rigid backbones were synthesized from enediyne‐containing Frechet‐type dendrimers. Two generations of dendrimers were conically incorporated with 3‐(2‐(2‐(trimethylsilyl)ethynyl)phenyl)prop‐2‐yn‐1‐ol. The trimethylsilyl protection groups of enediyne units were subsequently removed, and two types of brush polymers with rigid conjugated backbone were prepared through Bergman cyclization polymerization at elevated temperature under vacuum. The dendronized polymers were characterized with GPC, IR, UV–vis, and NMR spectroscopy. Furthermore, the morphology of the dendronized polymer was revealed by atomic force microscopy. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Convenient synthesis of thermo‐responsive PtBA‐g‐PPEGMEMA well‐defined amphiphilic graft copolymer without polymeric functional group transformation

A series of well‐defined amphiphilic graft copolymers bearing hydrophobic poly(tert‐butyl acrylate) backbone and hydrophilic poly[poly(ethylene glycol) methyl ether methacrylate)] (PPEGMEMA) side chains were synthesized by sequential reversible addition fragmentation chain transfer (RAFT) polymerization and single‐electron‐transfer living radical polymerization (SET‐LRP) without any polymeric functional group transformation. A new Br‐containing acrylate monomer, tert‐butyl 2‐((2‐bromoisobutanoyloxy)methyl)acrylate (tBBIBMA), was first prepared, which can be homopolymerized by RAFT to give a well‐defined PtBBIBMA homopolymer with a narrow molecular weight distribution (M_w/M_n = 1.15). This homopolymer with pendant Br initiation group in every repeating unit initiated SET‐LRP of PEGMEMA at 45 °C using CuBr/dHbpy as catalytic system to afford well‐defined PtBBIBMA‐g‐PPEGMEMA graft copolymers via the grafting‐from strategy. The self‐assembly behavior of the obtained graft copolymers in aqueous media was investigated by fluorescence spectroscopy and TEM. These copolymers were found to be stimuli‐responsive to both temperature and ions. Finally, poly(acrylic acid)‐g‐PPEGMEMA double hydrophilic graft copolymers were obtained by selective acidic hydrolysis of hydrophobic PtBA backbone while PPEGMEMA side chains kept inert. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Steric effect and mobility of the alkyl chain in regio‐irregular poly‐3‐alkylthiophenes

The physicochemical properties of polyalkylthiophenes with various side‐chain length were widely investigated in order to reveal the functions of alkyl side‐chains in these polymers. The effects of the side‐chains on the properties of polyalkylthiophenes can be explained by their steric hindrance and mobility. The steric hindrance of alkyl chain affected not only the polymerization mechanism of the monomers but also the redox potential, interchain distance, charge transport properties, and film morphology. The mobility of the side‐chain influences the rate of dedoping, heat of transitions of polymers. The structure regio‐regularity, stability of polarons/bipolarons, film morphologies, and interchain interactions determine the optical and electric properties of polyalkylthiophenes. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1763–1772, 1999     

Progress on the synthesis and catalytic and anti‐migration properties of ferrocene‐based burning rate catalysts

Burning rate catalysts are of great importance in solid composite propellants for their unique property of accelerating combustion speed. Among various kinds of burning rate catalysts, ferrocene and its derivatives exhibit excellent catalytic effects and have become the most widely used burning rate catalysts. However, these simple ferrocenyl compounds trend to migrate in solid composite propellants during storage, which causes great damage to the propellants, equipment and environment and can even affect personal safety. The exploration of novel anti‐migratory ferrocene‐based compounds has become an advanced research hotspot in the field of burning rate catalysis. This review focuses on recent progress on the synthesis and catalytic properties of ferrocene‐based polymers and ferrocene derivatives as burning rate catalysts. Two main aspects of anti‐migratory exploration, i.e. synthesis of ferrocene‐based polymers and modification of the side groups of ferrocene, are summarized. Ferrocene‐based polymers can be obtained via condensation polymerization, addition polymerization, ring‐opening polymerization, polymer reactions, etc. Ferrocenyl compounds with active groups and ferrocene‐based metal coordination compounds were developed instead of the methods of lengthening the carbon chain of side groups and improving molecular polarity. Also, possible mechanisms of burning rate catalytic activity and migration are discussed and analyzed. Finally, the key points of the development of ferrocene‐based burning rate catalysts and solid composite propellants are proposed. Copyright © 2016 John Wiley & Sons, Ltd.     

Photovoltaic response to structural modifications on a series of conjugated polymers based on 2‐aryl‐2H‐benzotriazoles

The synthesis, characterization, and photovoltaic properties of a series of four conjugated polymers containing 2‐aryl‐2H‐benzotriazoles and “bis(thiopheno)dialkylfluorenes” is described. The polymers were obtained via Suzuki‐polycondensation and comprise alternating electron rich and electron poor building blocks. The impact of systematic structural changes on the electronic and morphological properties and device efficiencies were studied. Application of these polymers as light‐harvesting and electron‐donating materials in organic solar cells using PCBM derivatives as electron accepting materials resulted in power conversion efficiencies up to 1.8%. Both the properties of the pristine polymers and the device performance show that the impact of the substitution farther‐off the backbone is negligible while substitution directly on the backbone has a major impact. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Multisensitive polymers based on 2‐vinylpyridine and N‐isopropylacrylamide *

Poly(2‐vinylpyridine) (P2VP) containing functionalized end groups was synthesized using nitroxyl‐mediated radical polymerization with a hydroxy‐functionalized stable free radical. It was shown that P2VP could be synthesized with variable molar masses and low polydispersities. The transformation of the hydroxy groups to an acrylic ester led to the formation of macromonomers. A free‐radical copolymerization of these macromonomers with N‐isopropylacrylamide gave a graft copolymer with a poly(N‐ispopropylacrylamide) backbone and P2VP side chains. Polymers containing different amounts of the monomers were synthesized. It was possible to vary both the amount of P2VP side chains at a constant chain length of the macromonomer and the chain length at a nearly constant chain number. The behavior of the multifunctional macromolecules at different temperatures and pH values was investigated using dynamic light scattering and DSC. The macromolecules were found to retain the specific properties of the homopolymers. The hydrodynamic radii of the synthesized graft copolymers were both dependent on the temperature and pH value. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3797–3804, 2001