Ru‐doped TiO2 nanotubes: Improved performance in dye‐sensitized solar cells

In the present work we use a series of Ti–Ru alloys, with minor amounts of Ru (0.01, 0.02, 0.05 and 0.2 at%) to grow anodic self‐organized Ru‐doped TiO₂ nanotube layers. When used in dye‐sensitized solar cells (DSSCs), the nanotube layers with an optimum amount of Ru (0.02 at% Ru in the alloy) show a considerable increase in solar cell efficiency (η = 5.2%) under AM1.5 (100 mW/cm²) conditions compared with non‐doped TiO₂ nanotubes (η = 4.3%).

     

Antireflection ln2O3 coatings of self‐organized TiO2 nanotube layers prepared by atomic layer deposition

We report on the uniform anti‐reflection coating of TiO₂ nanotube layers with a secondary material – indium trioxide (In₂O₃) – by atomic layer deposition (ALD). We provide for the first time the detailed evidence of the ALD deposited coating inside nanotubes for three different tube layers with aspect ratio up to ≈80, which is so far the highest aspect ratio reported for ALD‐processed self‐organized anodic TiO₂ nanotubes. We show that uniform In₂O₃coating of the nanotubes strongly influences the overall reflectance of the layers due to intrinsic properties of In₂O₃. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Directed self‐assembly of single quantum dots for telecommunication wavelength optical devices

The ability to control the nucleation site of a single quantum dot will have a profound effect on the development of quantum dot‐based photonic devices. The deterministic approach will provide a truly scalable technology that can take full advantage of conventional semiconductor processing for device fabrication. In this review, we discuss the progress towards the integration of deterministically nucleated single quantum dots with top‐down quantum optical devices targeting telecommunication wavelengths. Advances in site‐controlled quantum dot nucleation using selective‐area epitaxy now makes it possible to position quantum dots at predetermined positions on a substrate in registry with alignment markers. This, in turn, has allowed for devices fabricated in subsequent processing steps to be aligned to individual quantum dots. The specific devices being targeted are gated‐single dots and coupled dot‐cavity systems which are key components of efficient sources of single photons and entangled photon pairs.     

Tunable and High Photoluminescence Quantum Yield from Self‐Decorated TiO2 Quantum Dots on Fluorine Doped Mesoporous TiO2 Flowers by Rapid Thermal Annealing

Herein a novel approach is reported to achieve tunable and high photoluminescence (PL) quantum yield (QY) from the self‐grown spherical TiO₂ quantum dots (QDs) on fluorine doped TiO₂ (F‐TiO₂) flowers, mesoporous in nature, synthesized by a simple solvothermal process. The strong PL emission from F‐TiO₂ QDs centered at ≈485 nm is associated with shallow and deep traps, and a record high PL QY of ≈5.76% is measured at room temperature. Size distribution and doping of F‐TiO₂ nanocrystals (NCs) are successfully tuned by simply varying the HF concentration during synthesis. During the post‐growth rapid thermal annealing (RTA) under vacuum, the arbitrary shaped F‐TiO₂ NCs transform into spherical QDs with smaller sizes and it shows dramatic enhancement (≈163 times) in the PL intensity. Electron spin resonance (ESR) and X‐ray photoelectron spectroscopy (XPS) confirm the high density of oxygen vacancy defects on the surface of TiO₂ NCs. Confocal fluorescence microscopy imaging shows bright whitish emission from the F‐TiO₂ QDs. Low temperature and time resolved PL studies reveal that the ultrafast radiative recombination in the TiO₂ QDs results in highly efficient PL emission. A highly stable, biologically inert, and highly fluorescent TiO₂ QDs/flowers without any capping agent demonstrated here is significant for emerging applications in bioimaging, energy, and environmental cleaning.     

Sb2S3 quantum dots: diffusion‐controlled growth and characterization

The quantum dots of antimony trisulphide, a potential semiconductor for various applications, are grown in glass matrix for the first time and are characterized by various techniques. The dependence of the average dot size on growth parameters like growth temperature and time is systematically studied for the dot size range of 5–80 nm. The linear blue shift of band gap of dots with inverse square of dot size clearly indicates the typical behavior of quantum dots in a strong quantum confinement regime. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis of high‐aspect‐ratio,top‐open and ultraflat‐surface TiO2 nanotubes through double‐layered configuration

In this Letter, a novel modified anodization was utilized to synthesize high‐aspect‐ratio, top‐open and ultraflat‐surface TiO₂ nanotubes. The interruption of voltage during anodization leads to the formation of a double‐layered structure. Due to the weak mechanical connection between the upper and the underlying layer, the two parts can be easily detached. Compared with the conventional ultrasonication method to remove the clusters of nanotubes where rough surfaces resulted, this efficient and reliable strategy may facilitate further applications of TiO₂ nanotubes in diverse conditions.

     

Increased open‐circuit voltage of ZnO nanowire/PbS quantum dot bulk heterojunction solar cells with solution‐deposited Mg(OH)2 interlayer

An ultrathin Mg(OH)₂ layer was solution‐deposited onto the ZnO nanowires to solve the problem of interfacial charge recombination, caused by the increase of interfacial area in bulk heterojunction (BHJ) PbS colloidal quantum dot solar cells (CQDSCs). This Mg(OH)₂ interlayer efficiently passivated the surface defects of ZnO nanowires and provided tunnel barrier at ZnO/PbS interface. As a result, the charge recombination at ZnO/PbS interface was largely suppressed, proved by the significantly elongated electron lifetime and the increased open‐circuit voltage of the Mg(OH)₂‐involved BHJ CQDSCs. Careful thickness optimization of Mg(OH)₂ interlayer finally brought a ～33% increase in V_oc and ～25% improvement in power conversion efficiency.     

Fabrication of open‐ended TiO2 nanotube arrays by a simple two‐step anodization

We report a two‐step anodizing approach for the fabrication of large‐scale open‐ended TiO₂ nanotube arrays (TNAs) on a conductive Au layer. In this method, a deposited Ti/Au bilayer film is initially anodized under a high potential to form and shape the TNAs. A following low potential is then in situ applied at a suitable time to slowly eliminate the remaining barrier layer at the bottom of the TNAs without further treatment. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Experimental observation of two‐layer TiO2 nanotube arrays prepared by stepping‐voltage anodization

Two‐layer TiO₂ nanotube arrays were produced by stepping down the anodic voltage during which three nanotube interface structures between the top layer and the second layer were observed by SEM. We detected a polygonal ring structure on the top surface of the second layer and offer direct evidence of the growth of this second tube layer both at the cell boundary and right beneath the bottom of the first tube layer. For these processes, a possible growth mechanism is presented. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A high efficiency 3D photovoltaic microwire with carbon nanotubes (CNT)‐quantum dot (QD) hybrid interface

An innovative hybrid QD sensitized photovoltaic carbon nanotubes microyarn has been developed using thermally‐stable and highly conductive carbon nanotubes yarns (CNYs). These CNYs are highly inter‐aligned, ultrastrong and flexible with excellent electrical conductivity, mechanical integrity and catalytic properties. The CNYs are coated with a QD‐incorporated TiO₂ microfilm and intertwined with a second set of CNYs as a counter electrode (CE). The maximum photon to current conversion efficiency (η_AM1.5) achieved with prolonged‐time stability was 5.93%. These cells are capable of efficiently harvesting incident photons regardless of direction and generating photocurrents with high efficiency and operational stability.

     

The effect of post‐growth thermal annealing on the emission spectra of GaAs/AlGaAs quantum dots grown by droplet epitaxy

We fabricated GaAs/AlGaAs quantum dots by droplet epitaxy, and obtained the geometries of the dots by scanning transmission electron microscopy. Post‐growth thermal annealing is essential for the optical activation of quantum dots grown by droplet epitaxy. We measured the emission energy shifts of the dots and the underlying superlattice by post‐ growth thermal annealing, and specified the emission from dots by selectively etching the structure down to a low layer of quantum dots. We studied the influence of the degree of annealing on the optical properties of the dots from the peak shifts of the superlattice, since the superlattice has a uniform and well‐defined geometry. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Resonance Raman spectroscopic study for radial vibrational modes in ultra‐thin walled TiO2 nanotubes

The study reports the observation of radial vibrational modes in ultra‐thin walled anatase TiO₂ nanotube powders grown by rapid breakdown anodization technique using resonant Raman spectroscopic study. The as‐grown tubes in the anatase phase are around 2–5 nm in wall thickness, 15–18 nm in diameter and few microns in length. The E_{g(ν1,ν5,ν6)} phonon modes with molecular vibrations in the radial direction are predominant in the resonance Raman spectroscopy using 325 nm He–Cd excitation. Multi‐phonons including overtones and combinational modes of E_{g(ν1,ν5,ν6)} are abundantly observed. Fröhlich interaction owing to electron–phonon coupling in the resonance Raman spectroscopy of ultra‐thin wall nanotubes is responsible for the observation of radial vibrational modes. Finite size with large surface energy in these nanotubes energetically favor only one mode, B_1g(ν4) with unidirectional molecular vibrations in the parallel configuration out of the three Raman modes with molecular vibration normal to the radial modes. Enhanced specific heat with increasing temperatures in these nanotubes as compared to that reported for nanoparticles of similar diameter may possibly be related to the presence of the prominent radial mode along with other energetic phonon mode. The findings elucidate the understanding of total energy landscape for TiO₂ nanotubes. Copyright © 2015 John Wiley & Sons, Ltd.     

A simple approach for synthesis of TiO2 nanotubes with through‐hole morphology

The present work reports a simple approach for fabrication of self‐standing titania (TiO₂) nanotube membranes with through‐hole morphology. The method is hydrofluoric acid free and the pore opening of TiO₂ nanotubes is performed by electrochemical thinning of the oxide barrier layer. A reduction of anodization voltage was applied at the end of the anodization process to cause a successful removal of the remaining barrier layer from the TiO₂ nanotubes during their detachment from the underlying titanium substrate. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Atomic layer deposition of TiO2 and Al‐doped TiO2 films on Ir substrates for ultralow leakage currents

TiO₂ and Al‐doped TiO₂ (ATO) films were grown on Ir substrates by atomic layer deposition using O₃ as the oxygen source. With increasing O₃ feeding time, the crystalline structure of the TiO₂ films was transformed from anatase to rutile. Above an O₃ feeding time of 35 s, the films crystallized as only rutile due to the formation of IrO₂ layer at the interface. The TiO₂ and ATO films showed higher dielectric constants of 78 and 51, respectively. The films on Ir showed superior leakage properties compared to the films on Ru due to the high work‐function of Ir. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Raman spectroscopy of very small Cd1−xCoxS quantum dots grown by a novel protocol: direct observation of acoustic‐optical phonon coupling

Glass‐embedded Cd_1−xCo_xS quantum dots (QDs) with mean radius of R ≈ 1.70 nm were successfully synthesized by a novel protocol on the basis of the melting‐nucleation synthesis route and herein investigated by several experimental techniques. Incorporation of Co²⁺ ions into the QD lattice was evidenced by X‐ray diffraction and magnetic force microscopy results. Optical absorption features with irregular spacing in the ligand field region confirmed that the majority of the incorporated Co²⁺ ions are under influence of a low‐symmetry crystal field located near to the Cd_1−xCo_xS QD surface. Electron paramagnetic resonance data confirmed the presence of Co²⁺ ions in a highly inhomogeneous crystal field environment identified at the interface between the hosting glass matrix (amorphous) and the crystalline QD. The acoustic‐optical phonon coupling in the Cd_1−xCo_xS QDs (x ≠ 0.000) was directly observed by Raman measurements, which have shown a high‐frequency shoulder of the longitudinal optical phonon peak. This effect is tuned by the size‐dependent sp‐d exchange interaction due to the magnetic doping, causing variations in the coupling between electrons and longitudinal optical phonon. Copyright © 2013 John Wiley & Sons, Ltd.     

A New Insight of the Photothermal Effect on the Highly Efficient Visible‐Light‐Driven Photocatalytic Performance of Novel‐Designed TiO2 Rambutan‐Like Microspheres Decorated by Au Nanorods

Photocatalyst‐assisted degradation of organic pollutants, which exhibits a novel strategy for solar‐energy utilization, possesses enormous potential in various applications. Extending the light‐absorption range in the spectrum of sunlight and improving light‐conversion efficiency are always primary issues to enhance the catalytic performance of these photocatalysts. Herein, a new structure of gold‐nanorod‐decorated TiO₂ rambutan‐like microspheres is designed, which exhibits superior photocatalytic ability toward Rhodamine B in the range of visible light due to the 3D distribution of the TiO₂ branches on the surface of the microspheres, which prompts the multireflection of photons. The absorption rate of photons is thereby tremendously enhanced. This is beneficial for the generation of hot electrons originating from the localized surface plasmonic resonance of Au nanorods, which can be used to both initiate the reaction and produce the photothermal effect. Hot electrons generated by a single Au nanorod in microspheres to initiate the degradation reaction can be as high as 2.5 times of those in the nanowires' counterpart. Moreover, the heating power of a single Au nanorod in microspheres reaches up to 4.4 times higher than that in nanowires, which further accelerates the degradation rate. The reaction pathway of visible‐light‐assisted RhB degradation catalyzed by Au/TiO₂ microspheres goes through an initial N‐deethylation process instead of the complete cycloreversion catalyzed by pure TiO₂ microspheres under UV irradiation. This strategy of structure design for improved photon absorption, which achieves high degradation rate and photothermal effect, is promising for the development of novel photocatalysts.