High vertical breakdown strength in with low specific on‐resistance AlGaN/AlN/GaN HEMTs on silicon

Off‐state and vertical breakdown characteristics of AlGaN/AlN/GaN high‐electron‐mobility transistors (HEMTs) on high‐resistivity (HR)‐Si substrate were investigated and analysed. Three‐terminal off‐state breakdown (BV_gd) was measured as a function of gate–drain spacing (L_gd). The saturation of BV_gd with L_gd is because of increased gate leakage current. HEMTs with L_gd = 6 µm exhibited a specific on‐resistance R_DS[ON] of 0.45 mΩ cm². The figure of merit (FOM = BV_gd²/R_DS[ON]) is as high as 2.0 × 10⁸ V² Ω^–1 cm^–2, the highest among the reported values for GaN HEMTs on Si substrate. A vertical breakdown of ～1000 V was observed on 1.2 µm thick buffer GaN/AlN grown on Si substrate. The occurrence of high breakdown voltage is due to the high quality of GaN/AlN buffer layers on Si substrate with reduced threading dislocations which has been confirmed by transmission electron microscopy (TEM). This indicates that the AlGaN/AlN/GaN HEMT with 1.2 µm thick GaN/AlN buffer on Si substrate is promising candidate for high‐power and high‐speed switching device applications. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

I18 – the microfocus spectroscopy beamline at the Diamond Light Source

The design and performance of the microfocus spectroscopy beamline at the Diamond Light Source are described. The beamline is based on a 27 mm‐period undulator to give an operable energy range between 2 and 20.7 keV, enabling it to cover the K‐edges of the elements from P to Mo and the L₃‐edges from Sr to Pu. Micro‐X‐ray fluorescence, micro‐EXAFS and micro‐X‐ray diffraction have all been achieved on the beamline with a spot size of ～3 µm. The principal optical elements of the beamline consist of a toroid mirror, a liquid‐nitrogen‐cooled double‐crystal monochromator and a pair of bimorph Kirkpatrick–Baez mirrors. The performance of the optics is compared with theoretical values and a few of the early experimental results are summarized.     

Enhanced piezoelectric properties of sodium bismuth titanate (Na0.5Bi4.5Ti4O15) ceramics with B‐site cobalt modification

The piezoelectric properties of the cobalt‐modified sodium bismuth titanate (Na_0.5Bi_4.5Ti₄O₁₅, NBT) piezoelectric ceramics were investigated. The piezoelectric properties of NBT ceramics were significantly enhanced by cobalt modification. The Curie temperature T_C and piezoelectric constant d₃₃ for the 0.3 wt% cobalt‐modified NBT ceramics (NBT‐C3) were found to be 663 °C and 30 pC/N, respectively. Thermal annealing studies presented that the cobalt‐modified NBT ceramics possess stable piezoelectric properties, demonstrating that the cobalt‐modified NBT‐based ceramics are promising candidates for high temperature piezoelectric applications. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synchrotron study of oxygen depletion in a Bi‐2212 whisker annealed at 363 K

Direct evidence is reported of structural and electronic effects induced on a single Bi₂Sr₂CaCu₂O_8+δ (Bi‐2212) whisker during a progressive annealing process. The crystal was investigated by micro X‐ray diffraction (µ‐XRD), micro X‐ray fluorescence and electrical characterization at the European Synchrotron Radiation Facility, during a series of three in situ thermal processes at 363 K. Each step increased the sample resistivity and decreased its critical temperature, up to a semiconducting behaviour. These data correlate with µ‐XRD analysis, which shows an increase of the c‐axis parameter from 30.56 Å to 30.75 Å, indicating an oxygen depletion mechanism. Mild temperature annealing could be an effective process to modulate the intrinsic Josephson junctions' characteristics in Bi‐2212 whiskers.     

The performances of silicon solar cell with core–shell p-n junctions of micro-nano pillars fabricated by cesium chloride self-assembly and dry etching

Silicon micro-nano pillars are cost-efficiently integrated using twice cesium chloride (CsCl) islands lithography technique and dry etching for solar cell applications. The micro PMMA islands are fabricated by inductively coupled plasma (ICP) dry etching with micro CsCl islands as masks, and the nano CsCl islands with nano sizes then are made on the surface of micro PMMA islands and silicon. By ICP dry etching with the mask of micro PMMA islands and nano CsCl islands, the micro-nano silicon pillars are made and certain height micro pillars are randomly positioned between dense arrays of nano pillars with different morphologies by controlling etching conditions. With 300 nm depth p-n junction detected by secondary-ion mass spectrometry (SIMS), the micro pillars of the diameter about 1 μm form the core–shell p-n junction to maximize utility of p-n junction interface and enable efficient free carrier collection, and the nano tapered pillars of 150 nm diameter are used to decrease reflection by a graded-refractive-index. Compared to single micro or nano pillar arrayed cells, the co-integrated solar cell with micro and nano pillars demonstrates improved photovoltaic characteristic that is a photovoltaic conversion efficiency (PCE) of 15.35 % with a short circuit current density (J _sc) of 38.40 mA/cm² and an open circuit voltage (V _oc) of 555.7 mV, which benefits from the advantages of micro-nano pillar structures and can be further improved upon process optimization.     

Characterization of tetragonal SAT0.3: LA0.075: CAT0.625 perovskite crystal: spectroscopic and microscopic investigations

We report room temperature measurements of X‐ray diffraction (XRD), optical transmission microscopy (OTM), atomic force microscopy (AFM), infrared‐absorption (IR), and micro‐Raman spectroscopy (µ‐RS) of the oriented SAT_0.3: LA_0.075: CAT_0.625 single crystal. The final structure refinement of SAT_0.3: LA_0.075: CAT_0.625 crystal was performed for I4/m space group at room temperature. Vibrational spectra of the crystal were discussed in terms of group‐theoretical predictions for untilted (Fm3 m) and tilted tetragonal (I4/m) perovskite structure. The confocal µ‐Raman measurements of depth profiling of SAT_0.3: LA_0.075: CAT_0.625 crystal suggest a relationship between sensitivities of the ordering‐related Raman‐active modes and the variation of order parameter η. Copyright © 2009 John Wiley & Sons, Ltd.     

Study on new magnetization property and its micro‐mechanism that occurred in anti‐ferromagnetic NiO nanoflowers with nearly uniform size

Temperature‐dependent magnetization and magnon Raman spectra were measured for anti‐ferromagnetic NiO‐nanoflowers. The results show several new magnetic behaviors, including the appearance of a ferromagnetic phase, a reduced Néel temperature (T_N) and a reduced Curie temperature (T_C). The temperature dependencies of the double magnon (2M) Raman wavenumber and intensity are similar to those of magnetization. A magnetic granules model (MGM) consisted of a crystalline core enclosed by a shell is proposed. The model suggests that the large quantity of spins induced by specific surface effect in the shell plays a key role in nano‐magnetism. Based on the MGM, the micro‐mechanism of the observed new magnetic behavior is understood by the magnon Raman spectra. The MGM is based on the general features of magnetic nano‐particles, and thus it should be generally applicable to common magnetic nano‐particles. Copyright © 2014 John Wiley & Sons, Ltd.     

Optimization of direct modulation rate for circular microlasers by adjusting mode Q factor

Semiconductor microcircular lasers have been investigated as potential light sources for photonic integrated circuits and optical interconnections for more than two decades. However, the direct modulation bandwidths of the circular microlasers remain a challenge, especially when being compared with other microlasers, such as photonic crystal lasers. In this paper, microcircular lasers connected to an output waveguide are investigated for high‐speed direct modulation with optimized mode Q factors. Small signal modulation with a resonance frequency of f_R = 12.5 GHz is realized for a AlGaInAs/InP circular microlaser with a radius of 10 µm at 290 K. Furthermore, clear eye diagrams are observed at 12.5 Gbit/s for a 15‐µm radius circular microlaser with f_R = 6.9 GHz.     

Simultaneous small‐ and wide‐angle scattering at high X‐ray energies

Combined small‐ and wide‐angle X‐ray scattering (SAXS/WAXS) is a powerful technique for the study of materials at length scales ranging from atomic/molecular sizes (a few angstroms) to the mesoscopic regime (～1 nm to ～1 µm). A set‐up to apply this technique at high X‐ray energies (E > 50 keV) has been developed. Hard X‐rays permit the execution of at least three classes of investigations that are significantly more difficult to perform at standard X‐ray energies (8–20 keV): (i) in situ strain analysis revealing anisotropic strain behaviour both at the atomic (WAXS) as well as at the mesoscopic (SAXS) length scales, (ii) acquisition of WAXS patterns to very large q (>20 Å^?1) thus allowing atomic pair distribution function analysis (SAXS/PDF) of micro‐ and nano‐structured materials, and (iii) utilization of complex sample environments involving thick X‐ray windows and/or samples that can be penetrated only by high‐energy X‐rays. Using the reported set‐up a time resolution of approximately two seconds was demonstrated. It is planned to further improve this time resolution in the near future.     

Improved performance of silicon‐nanoparticle film‐coated dye‐sensitized solar cells

Silicon (Si) nanoparticles with average size of 13 nm and orange–red luminescence under UV absorption were synthesized using electrochemical etching of silicon wafers. A film of Si nanoparticles with thickness of 0.75 µm to 2.6 µm was coated on the glass (TiO₂ side) of a dye‐sensitized solar cell (DSSC). The cell exhibited nearly 9% enhancement in power conversion efficiency (η) at film thickness of ～2.4 µm under solar irradiation of 100 mW/cm² (AM 1.5) with improved fill factor and short‐circuit current density. This study revealed for the first time that the Si‐nanoparticle film converting UV into visible light and helping in homogeneous irradiation, can be utilized for improving the efficiency of the DSSCs. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Capabilities of through‐the‐substrate microdiffraction: application of Patterson‐function direct methods to synchrotron data from polished thin sections

Some theoretical and practical aspects of the application of transmission microdiffraction (µXRD) to thin sections (≤30 µm thickness) of samples fixed or deposited on substrates are discussed. The principal characteristic of this technique is that the analysed micro‐sized region of the thin section is illuminated through the substrate (tts‐µXRD). Fields that can benefit from this are mineralogy, petrology and materials sciences since they often require in situ lateral studies to follow the evolution of crystalline phases or to determine new crystal structures in the case of phase transitions. The capability of tts‐µXRD for performing structural studies with synchrotron radiation is shown by two examples. The first example is a test case in which tts‐µXRD intensity data of pure aerinite are processed using Patterson‐function direct methods to directly solve the crystal structure. In the second example, tts‐µXRD is used to study the transformation of laumonite into a new aluminosilicate for which a crystal structure model is proposed.     

Surface and flexoelectric polarization in a nematic liquid crystal 5CB

The temperature dependence of the surface polarization has been measured for both the planar and homeotropic orientation of a nematic liquid crystal at a solid substrate. A conventional liquid crystal 5CB, pure and doped with an azo-dye, was used in cells with controlled asymmetry for light absorption. The measurements have been made by a pyroelectric technique using short pulses of a YAG laser to create a temperature increment. The latter, in turn, was measured independently by a novel time-resolved “optical thermometer” technique monitoring temperature-dependent birefringence by a He- Ne laser beam. In accordance with the symmetry of the order parameter, the surface polarization has different sign for the two orientations, its magnitude ranges from -4 to +2pC/m. The same technique has been used for the measurement of the flexoelectric polarization in hybrid cells. The sum of the flexoelectric coefficients is e ₁ + e ₃ = - 13pC/m at 25°C. Received 28 February 2000 and Received in final form 5 September 2000     

Microstructure,dielectric, and piezoelectric properties of Ce‐modified Na0.5Bi4.5Ti4O15 high temperature piezoceramics

The cerium modified sodium bismuth titanate (Na_0.5Bi_4.5Ti₄O₁₅, NBT) piezoelectric ceramics have been prepared by using the conventional mixed oxide method. X‐ray diffraction analysis revealed that the cerium modified NBT ceramics have a pure four‐layer Aurivillius phase structure. The piezoelectric activity of NBT ceramics was found significantly improved by the modification of cerium. The Curie temperature T_c, and piezoelectric coefficient d₃₃ for the NBT ceramics with 0.50 wt% cerium modification were found to be 655 °C, and 28 pC/N respectively. The Curie temperature gradually decreased from 668 °C to 653 °C with the increase of cerium modification. The dielectric spectroscopy showed that the samples possess stable piezoelectric properties, demonstrating practical potential that for high temperature applications. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Enhanced magnetoelectric properties in three-phase composites with 2-1-2 connectivity

An investigation is reported on a 2-1-2 magnetoelectric (ME) laminate composite having Metglas/PZNT/Metglas configuration with ferrite pillars embedded in the PZNT phase. The piezoelectric layer with composition 0.2Pb(Zn_1/3Nb_2/3)O₃–0.8Pb(Zr_0.5Ti_0.5)O₃ (PZNT) consisted of co-fired (Ni_0.6Cu_0.2Zn_0.2)Fe₂O₃ (NCZF) pillars. The top and bottom Metglas layers in the sandwich structure had a thickness of 100 µm, whereas the middle piezoelectric layer had thickness of 800 µm. This 2-1-2 composite was found to exhibit a ME coefficient of the order of 352 mV/cm Oe. Interestingly, the performance of the 2-1-2 composite is 15% higher than that of conventional 2-2 laminate composite.     

Lead‐free piezoelectric (Na0.5Bi0.5)0.94TiO3–Ba0.06TiO3 nanofiber by electrospinning

Lead‐free (Na_0.5Bi_0.5)_0.94TiO₃–Ba_0.06TiO₃ (NBT‐BT6) nanofibers were synthesized by the sol–gel process and electrospinning, and a butterfly‐shaped piezoelectric response was measured by scanning force microscopy. NBT‐BT6 nanofibers with perovskite phase were formed, after being cleaned at 700 °C for 1 hour, and the diameters are in the range of 150 nm to 300 nm. The average value of the effective piezoelectric coefficient d₃₃ is 102 pm/V. The high piezoelectricity may be attributed to the easiness for the electric field to tilt the polar vector of the domain and to the increase of the possible spontaneous polarization direction. There is a potential for the application of NBT‐BT6 nanofibers in nanoscale piezoelectric devices. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Detection of the contribution of the inverse flexoelectric effect to the photorefractive response in a bismuth titanium oxide single crystal

Relations determining the contribution of the inverse flexoelectric effect to the photorefractive response have been determined for the case of the interaction of a steady pump wave conserving left-hand circular polarization with a phase-modulated signal wave that has circular polarization of the opposite sign on the input face of a crystal that has the (100) orientation and symmetry group 23. The experimental studies of such an interaction in a Bi₁₂TiO₂0:Fe,Cu crystal make it possible to estimate its flexoelectric coefficient as f ₁₁ = 5.3 nC/m.     

Ageing of calcium silicate cements for endodontic use in simulated body fluids: a micro‐Raman study

To evaluate bioactivity properties, a calcium silicate experimental cement (wTC) and a phosphate‐doped wTC cement (wTC‐TCP) were aged for different times (1–180 days) at 37 °C in two simulated body fluids, i.e. Dulbecco's phosphate buffered saline (DPBS) and Hank's balanced salt solution (HBSS). The cements were analyzed by micro‐Raman spectroscopy to investigate the presence of calcium phosphate deposits and the composition changes as a function of the storage time (hydration of anhydrite/gypsum and formation of ettringite; hydration of belite/alite and formation of hydrated silicates). After 1 day of ageing in DPBS, the two cements already showed a different behavior: only the surface of wTC‐TCP cement showed the band at 965 cm⁻¹, suggesting the formation of a detectably thick calcium phosphate deposit. The trend of the I₉₆₅/I₉₉₀ Raman intensity ratio indicated the formation of a meanly thicker apatite deposit on the wTC‐TCP cement until 90 days. After 60 days of ageing in DPBS, the thickness of the apatite deposit on wTC and wTC‐TCP was about 200 and 500 µm, respectively, whereas at 180 days, the two cements did not appear significantly different (thickness of about 900 µm). The bioactivity of both cements in HBSS was less pronounced than in DPBS, according to the lower phosphate concentration of HBSS; at the same time, higher amounts of calcite were found on the surface of both cements. The wTC‐TCP cement showed a higher bioactivity in this medium also; after 180 days, the thickness of the apatite deposit on wTC and wTC‐TCP was < 50 µm and about 100 µm, respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

A study on red lead degradation in a medieval manuscript Lorvão Apocalypse (1189)

The mechanisms of red lead degradation were studied in a medieval Portuguese codex, Lorvão Apocalypse (1189), by Raman microscopy (µ‐Raman) and micro‐X‐ray diffraction (µ‐XRD). The range of pigments found for the illuminations is mainly limited to vermilion, orpiment and red lead. Micro‐Fourier transform infrared spectroscopy (µ‐FTIR) determined that the pigments were applied in a proteinaceous binding medium. In the red and orange colours, arsenic (As) was determined, by micro‐energy dispersive X‐ray fluorescence (µ‐EDXRF), to be ranging 1–4% (wt %). For those colours, lead white and calcium carbonate were found as fillers whereas orpiment was applied as a pure pigment. Raman microscopy identified, unequivocally, the degradation product of red lead as galena [lead (II) sulphide, PbS]. To determine the main factors affecting red lead degradation, a set of accelerating ageing experiments was designed to assess the influence of extenders and of the two other pigments, vermilion and orpiment. The experiments were followed by µ‐Raman, µ‐EDXRF and XRD. Raman microscopy results for the simulation of degradation of red lead, in the presence of orpiment, are in agreement to what was found in the Lorvão Apocalypse, galena being the main degradation product; also in common is a Raman band at ca. 810 cm⁻¹, which was attributed to a lead arsenate compound. It was concluded that in Lorvão Apocalypse, the degradation of red lead was a result of its reaction with orpiment. Copyright © 2009 John Wiley & Sons, Ltd.     

Low‐temperature photoluminescence studies of In‐rich InAlN nanocolumns

High‐quality In_x Al_1–xN (0.71 ≤ x_In ≤ 1.00) nanocolumns (NCs) have been grown on Si(111) substrates by rf‐plasma‐assisted molecular‐beam epitaxy (rf‐MBE). Low‐temperature photoluminescence (LT‐PL) spectra of various In‐rich InAlN NCs were measured at 4 K and single peak PL emissions were observed in the wavelength region from 0.89 µm to 1.79 µm. Temperature‐dependent PL spectra of In_0.92Al_0.08N NCs were studied and the so‐called “S‐shape” (decrease–increase–decrease) PL peak energy shift was observed with increasing temperature. This shift indicates the carrier localization induced by the In segregation effect and is different from the anomalous blue shift frequently observed in InN films and nanowires with high residual carrier concentra‐ tions. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)