Convenient synthetic route to tetraarylphosphonium polyelectrolytes via palladium‐catalyzed P–C coupling of aryl triflates and diphenylphosphine

A series of eight tetraarylphosphonium polyelectrolytes (TPELs) has been successfully synthesized by polymerization of diphenylphosphine and bis(aryl triflate)s. The bis(aryl triflate)s are readily prepared from bisphenols, some of which are commodity feedstocks such as bisphenol A. The polymerization via palladium catalyzed P–C bond formation produces degrees of polymerization up to 65. All polymeric triflates have reasonable thermal stability in the range of 350–450 °C. The stability of the TPELs to alkaline solution is strongly depending on the spacer between adjacent phosphonium sites. Polymers with electron‐releasing and bulky substituent para‐ to the phosphonium site have improved stability while those with electron‐withdrawing substituent para‐ to phosphonium site have decreased alkaline stability due to decomposition via a nucleophilic aromatic substitution pathway. These findings have important ramifications for the design of ionomers for alkaline exchange membrane fuel cells and related electrochemical energy conversion devices. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1984–1990     

Addition polymerization of nitrile compounds by organotin catalysts

A study was made of the polymerization of NC(CH₂)_nCN (n = 1?4), fumaronitrile and tetracyanoethylene (TCNE) by organotin compounds such as, oxides and alkoxides, as catalysts. It was found that polymerization occurred with malononitrile, succinonitrile, fumaronitrile and TCNE, but not with glutaronitrile and adiponitrile. Initiation of the polymerization is by addition of the tin compounds to the CN bond leading to the formation of a SnN bond, and propagation is probably by insertion of this bond to CN bonds. Addition of the tin compounds occurred only to nitrile groups that were sufficiently activated by proximity to electron withdrawing groups. The mutual electron withdrawing effect of one nitrile on the other is sufficient to permit this addition if the nitriles are geminal or vicinal, otherwise no reasonable polymerization occurred. The polymerization of the nitrile bond leads to the formation of highly conjugated systems, which give a black colour to the polymers.     

Substituent effects of N‐alkyl groups on thermally induced polymerization behavior of 1,3‐benzoxazines

Thermally induced polymerizations of a series of 1,3‐benzoxazines with a variety of substituents on the nitrogen atom were investigated in detail, particularly in the following three aspects of the polymerization: (1) N‐alkyl‐1,3‐benzoxazines are much more reactive than N‐phenyl‐1,3‐benzoxazine. (2) The polymerization rate depended on the bulkiness of the N‐substituent. The bulkier the substituent was, the slower the polymerization was. (3) The polymerizations accompanied weight loss due to the elimination of the corresponding imine (R‐N = CH₂), and its extent became larger when R was more bulky. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2777–2782, 2010     

Substituent effect on electron affinity,gas‐phase basicity,and structure of monosubstituted propynyl radicals and their anions: A theoretical study

The substituent effect of electron‐withdrawing groups on electron affinity and gas‐phase basicity has been investigated for substituted propynl radicals and their corresponding anions. It is shown that when a hydrogen of the α‐CH₃ group in the propynyl system is substituted by an electron‐withdrawing substituent, electron affinity increases, whereas gas‐phase basicity decreases. These results can be explained in terms of the natural atomic charge of the terminal acetylene carbon of the systems. The calculated electron affinities are 3.28 eV (?C?C? CH₂F), 3.59 eV (?C?C? CH₂Cl) and 3.73 eV (?C?C? CH₂Br), and the gas‐phase basicities of their anions are 359.5 kcal/mol (^?:C?C? CH₂F), 354.8 kcal/mol (:C?C? CH₂Cl) and 351.3 kcal/mol (^?:C?C? CH₂Br). It is concluded that the larger the magnitude of electron‐withdrawing, the greater is the electron affinity of radical and the smaller is the gas‐phase basicity of its anion. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2009     

Polymerization of 4‐methylpentene and vinylcyclohexane by amine bis(phenolate) titanium and zirconium complexes

The polymerization of the substituted olefins 4‐methylpentene and vinylcyclohexane by dibenzyl titanium and zirconium complexes of three amine bis(phenolate) ligands is reported. The ligands featured a dimethylamino side‐arm donor and either electron‐withdrawing (Cl and Br) or methyl phenolate substituents. After activation with B(C₆F₅)₃, the zirconium catalysts exhibited a higher activity than the titanium catalysts toward these bulky olefins. Very high weight‐average molecular weight poly(4‐methylpentene) was obtained with the zirconium catalysts. The zirconium catalysts were employed in 1‐hexene polymerization, and their activity was found to be the highest ever reported for catalysts of the amine bis(phenolate) family. The catalysts featuring methyl phenolate substituents showed a higher activity toward these substituted olefins than the electron‐poor catalysts; this trend was opposite to their activity toward 1‐hexene. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1136–1146, 2006     

A comparative computational study of the homolytic and heterolytic bond dissociation energies involved in the activation step of ATRP and SET‐LRP of vinyl monomers

A quantum‐chemical calculation of the homolytic and heterolytic bond dissociation energies of the model compounds of the monomer and dimer is reported. These model compounds include the dormant chloride, bromide, and iodide species for representative activated and nonactivated monomers containing electron‐withdrawing groups as well as for a nonactivated monomer containing an electron‐donor group. Two examples of sulfonyl and N‐halide initiators are also reported. The homolytic inner‐sphere electron‐transfer bond dissociation is known as atom transfer and is responsible for the activation step in ATRP. The heterolytic outer sphere single electron transfer bond dissociation is responsible for the activation step in single electron transfer mediated living radical polymerization (SET‐LRP). The results of this study demonstrated much lower bond dissociation energies for the outer sphere single electron transfer processes. These results explain the higher rate constant of activation, the higher apparent rate constant of propagation, and the lower polymerization temperature for both activated and nonactivated monomers containing electron‐withdrawing groups in SET‐LRP. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1607–1618, 2007     

Synthesis of hydroxy‐terminated,oligomeric poly(silarylene disiloxane)s via rhodium‐catalyzed dehydrogenative coupling and their use in the aminosilane–disilanol polymerization reaction

A series of oligomeric, hydroxy‐terminated silarylene–siloxane prepolymers of various lengths were prepared via dehydrogenative coupling between 1,4‐bis(dimethylsilyl)benzene [H(CH₃)₂SiC₆H₄Si(CH₃)₂H] and excess 1,4‐bis(hydroxydimethylsilyl)benzene [HO(CH₃)₂SiC₆H₄Si(CH₃)₂OH] in the presence of a catalytic amount of Wilkinson's catalyst [(Ph₃P)₃RhCl]. Attempts to incorporate the diacetylene units via dehydrogenative coupling polymerization between 1,4‐bis(dimethylsilyl)butadiyne [H(CH₃)₂Si? C?C? C?C? Si(CH₃)₂H] and the hydroxy‐terminated prepolymers were unsuccessful. The diacetylene units were incorporated into the polymer main chain via aminosilane–disilanol polycondensation between 1,4‐bis(dimethylaminodimethylsilyl)butadiyne [(CH₃)₂N? Si(CH₃)₂? C?C? C?C? (CH₃)₂SiN(CH₃)₂] and the hydroxy‐terminated prepolymers. Linear polymers were characterized by Fourier transform infrared, ¹H and ¹³C NMR, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis, and they were thermally crosslinked through the diacetylene units, producing networked polymeric systems. The thermooxidative stability of the networked polymers is discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1334–1341, 2002     

Oligo‐ and poly(fullerene)s for photovoltaic applications: Modeled electronic behaviors and synthesis

The atom transfer radical addition polymerization (ATRAP) of fullerene to give poly(fullerene)s (PFs) for organic electronics is explored. Quantum chemistry maps the expected electronic behavior of PFs with respect to common electron acceptors, namely fullerene, phenyl‐C₆₁‐butyric acid methyl ester and its bis‐adduct, and mono‐ and bis‐indine‐fullerene derivatives. Surprisingly, it is found that PFs should demonstrate electron affinities and LUMO energy levels closer to the bis‐derivatives than the mono‐adducts, even though only one C₆₀ double‐bond is used in PF chain formation. A self‐consistent library of PFs is synthesized and a correlation between structural characteristics and molecular weights is found. While comonomers with –OC₁₆H₃₃ linear side‐chains lead to the highest known ATRAP molecular weights of 21000 g mol ^{? 1}, like‐for‐like, branched side‐chains permit syntheses of higher molecular weights and more soluble polymers. Of the series, however, PFs with ‐OC₁₂ side‐chains are expected to be of the greatest interest for opto‐electronic applications due to their ease of handling and highest regioregularity. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1345–1355     

Synthesis,characterization, and self‐assembly of ion‐bonded A2B rod‐coil copolymer with oligo(para‐phenyleneethynylene) as rod segment

Supramolecular A₂B rod‐coil copolymer, composed of two polystyrene (PSt) arms and one oligo(para‐phenyleneethynylene) (OPE) arm linked via ionic bond, has been designed and successfully synthesized. First, a trifunctional initiator, methyl 1,3‐bis(bromomethyl)benzonate, was prepared and used to initiate the polymerization of styrene under atom transfer radical polymerization (ATRP) condition to provide polystyrene (PSt) carrying monoester group at the middle of polymer chain. Then, the ester group was transferred into tertiary amino group to give amino‐functionalized PSt, (PSt)₂? N(CH₃)₂. Subsequently, the ion‐bonded rod‐coil copolymer, (PSt)₂? OPE, was obtained by the reaction of (PSt)₂? N(CH₃)₂ with carboxy‐terminated OPE (OPE? COOH). The resulting copolymer was characterized by nuclear magnetic resonance (NMR), Fourier transformer infrared (FTIR), and gel permeation chromatography (GPC) techniques. Vesicles and spherical micelles were generated from this supramolecular rod‐coil copolymer through the manipulation of the initial polymer concentration in toluene. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7667–7676, 2008     

Bifunctional benzoxazines: Synthesis and polymerization of resorcinol based single isomers

Aside from their outstanding properties such as thermal and chemical stability and excellent mechanical performance, benzoxazines suffer from high polymerization temperatures. Isomeric mixtures of bifunctional benzoxazines based on resorcinol proved already to be highly reactive monomers enabling polymerizations at lower temperatures. This contribution describes the polymerization behavior of single benzoxazine isomers and furthermore the influence of different substituents at the aniline moiety on the curing temperature. Single isomers of bifunctional benzoxazines are now accessible in a straightforward one‐pot synthesis starting from resorcinol and the appropriate N‐phenyl functionalized aniline component. The asymmetric benzoxazine monomers bearing no (R‐a: T_peak = 179 °C) or electron‐donating substituents in meta position to N (R‐3,5dma: T_peak = 183 °C) succeed in lowering the polymerization temperature. Additionally, the impact of several initiating systems was studied resulting in a decrease of the polymerization temperature for all studied resorcinol derived benzoxazine isomers (down to 144 °C). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1243–1251     

Efficient zinc initiators supported by NNO‐tridentate ketiminate ligands for cyclic esters polymerization

A series of zinc benzylalkoxide complexes, [LⁿZn(μ‐OBn)]₂ (L = L ¹ H – L ⁵ H ), supported by NNO‐tridentate ketiminate ligands with various electron withdrawing‐donating subsituents have been synthesized and characterized. X‐ray crystal structural studies revealed that complexes 2b and 4b are dinuclear bridging through the benzylalkoxy oxygen atoms with penta‐coordinated metal centers. All the metal complexes have acted as efficient initiators for the ring‐opening polymerization of L ‐lactide (within 12 min, 0 °C). Remarkably, a molecular weight of PLLA up to 580,000 can be achieved using [(L⁵Zn(μ‐OBn)]₂ ( 5b ) as an initiator. The kinetic studies for the polymerization of L ‐lactide with complex 3b at ?10 °C corresponded to first‐order reactions in the monomer. The ring‐opening polymerization (ROP) of ε‐caprolactone, ε‐decalactone, β‐butyrolactone and their copolymer with complex 3b was investigated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Functional 1,3‐benzoxazine bearing 4‐pyridyl group: Synthesis and thermally induced polymerization behavior

1,3‐benzoxazine 1 , bearing 4‐pyridyl moiety on the nitrogen atom, was synthesized from p‐cresol, 4‐aminopyridine, and paraformaldehyde. The efficient synthesis was achieved by adding acetic acid to suppress the strong basicity caused by the presence of 4‐aminopyridine derivatives. Upon heating 1 at 180 °C, it underwent the thermally induced ring‐opening polymerization. The resulting polymer was composed of two types of repeating unit, i.e., (1) Mannich‐type one (‐phenol‐CH₂‐NR‐CH₂‐) that can be expected from the general ring‐opening polymerization of conventional benzoxazines and (2) a typical phenolic resin‐type one (‐phenol‐CH₂‐phenol‐) induced by release of 4‐aminopyridine and paraformaldehyde (unit B). Another structural feature of the polymer was that it possessed a benzoxazine moiety at the chain end. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 410–416     

Synthesis of poly(m‐phenylene) and poly(m‐phenylene)‐block‐ poly(3‐hexylthiophene) with low polydispersities

Well‐defined poly(m‐phenylene) (PMP), which is poly(1,3‐dibutoxy‐m‐phenylene), was successfully synthesized via Grignard metathesis polymerization. PMP with a reasonably high number‐average molecular weight (M_n) of 25,900 and a very low polydispersity index of 1.07 was obtained. The polymerization of a Grignard reagent monomer, 1‐bromo‐2,4‐dibutoxy‐5‐chloromagnesiobenzene, proceeded in a chain‐growth manner, probably due to the meta‐substituted design producing a short distance between the MgCl and Br groups and thereby making a smooth nickel species (? C? Ni? C? ) transfer to the intramolecular chain end (? C? Ni? Br) over a benzene ring. PMP showed a good solubility in the common organic solvents, such as tetrahydrofuran, CH₂Cl₂, and CHCl₃. Furthermore, a new block copolymer comprised of PMP and poly(3‐hexylthiophene) was also prepared. The tapping mode atomic force microscopy image of the surface of the block copolymer thin film on a mica substrate showed a nanofibril morphology with a clear contrast. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Skewered reactions in free‐radical crosslinking (co)polymerizations of liquid polybutadiene as internal olefinic multivinyl crosslinker

As an extension of our continuing studies concerned with the mechanistic discussion of network formation in the free‐radical crosslinking (co)polymerization of multivinyl monomers, this work refers to the skewered reactions in the crosslinking (co)polymerizations of liquid polybutadiene rubber (LBR) as an internal olefinic multivinyl monomer or crosslinker, especially focused on the competitive occurrence of both addition or skewered reaction to internal carbon–carbon (CC) double bonds and abstraction reaction of allylic hydrogens in LBR by growing polymer radical. Thus, LBR is regarded as an internal olefinic multiallyl monomer‐linked allyl groups (? CH?CH? CH₂? ) with methylene units (? CH₂? ). First, gelation in the polymerization of LBR was explored in detail, especially at elevated temperatures. The occurrence of intermolecular crosslinking was easier in the order LBR > LBR containing 20 mol % of 1,2‐structural units > liquid polyisoprene rubber. Then, we pursued the polymerization of LBR using dicumyl peroxide (DCPO) as typical organic peroxide used at elevated temperatures. The primary cumyloxy radical generated by the thermal decomposition of DCPO may add to CC double bond or abstract allylic hydrogen or undergo β‐scission to generate a secondary methyl radical. The initiation by the cumyloxy radical was omitted. The ratio of allylic hydrogen abstraction to β‐scission reaction was estimated; thus, only 39% of cumyloxy radical was used for the allylic hydrogen abstraction reaction. The addition of methyl radical to CC double bond was clearly observed. Finally, we pursued the intermolecular and intramolecular skewered reactions in free‐radical crosslinking LBR/vinyl pivalate copolymerizations. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

BF3·OEt2 in alcoholic media,an efficient initiator in the cationic polymerization of phenyl‐1,3‐benzoxazines

3‐Phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazine ( m ₁ ) underwent cationic ring opening polymerization using BF₃·OEt₂ in alcoholic solution under mild conditions. The polymerization of m ₁ proceeds through an intermediate hemiaminal ether leading mainly to the formation of polybenzoxazines with diphenylmethane bridges, and not only the classical Mannich‐type ones. During the first stages of the reaction, low‐molecular weight soluble oligomers containing benzoxazine rings are formed. At longer polymerization times, the propagation proceeds conventionally through the phenolic active sites. This polymerization mechanism is extensible to other substituted 3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazines but fails in the case of 3‐alkyl‐3,4‐dihydro‐2H‐1,3‐benzoxazines or when the phenyl group in Position 3 have a substituent in the p‐position. Spectroscopic studies and kinetic experiments using model reactions and deuterium labeled benzoxazines, allow proposing a plausible different polymerization mechanism. These soluble benzoxazine‐containing polymers can be conveniently processed and impregnated on appropriate substrates before underwent crosslinking producing materials with comparable properties to those of conventional bis‐benzoxazines. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5075–5084     

Methylol‐functional benzoxazines as precursors for high‐performance thermoset polymers: Unique simultaneous addition and condensation polymerization behavior

A new class of high‐performance resins of combined molecular structure of both traditional phenolics and benzoxazines has been developed. The monomers termed as methylol‐functional benzoxazines were synthesized through Mannich condensation reaction of methylol‐functional phenols and aromatic amines, including methylenedianiline (4,4′‐diaminodiphenylmethane) and oxydianiline (4,4′‐diaminodiphenyl ether), in the presence of paraformaldehyde. For comparison, other series of benzoxazine monomers were prepared from phenol, corresponding aromatic amines, and paraformaldehyde. The as‐synthesized monomers are characterized by their high purity as judged from ¹H NMR and Fourier transform infrared spectra. Differential scanning calorimetric thermograms of the novel monomers show two exothermic peaks associated with condensation reaction of methylol groups and ring‐opening polymerization of benzoxazines. The position of methylol group relative to benzoxazine structure plays a significant role in accelerating polymerization. Viscoelastic and thermogravimetric analyses of the crosslinked polymers reveal high T_g (274–343 °C) and excellent thermal stability when compared with the traditional polybenzoxazines. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Equilibrium polymerization behavior in the cationic single ring‐opening polymerization of bicyclo orthoesters

The synthesis and cationic polymerization of the following bicyclo orthoesters were examined: 4‐ethyl‐2,6,7‐trioxabicyclo[2.2.2]octane, 1,4‐diethyl‐2,6,7‐trioxabicyclo[2.2.2]octane, 4‐ethyl‐1‐phenyl‐2,6,7‐trioxabicyclo[2.2.2]octane, 4‐ethyl‐1‐(4‐methoxyphenyl)‐2,6,7‐trioxabicyclo[2.2.2]octane, and 4‐ethyl‐1‐(4‐nitrophenyl)‐2,6,7‐ trioxabicyclo[2.2.2]octane. All the monomers underwent equilibrium polymerization, which was confirmed by the relationships between the polymerization temperature and monomer conversion. The obtained polymers afforded the original monomers via an acid‐catalyst treatment with a low reagent concentration in CH₂Cl₂ at 20 °C. The equilibrium monomer concentration was constant, regardless of the initial reagent concentration, in both polymerization and depolymerization. The bicyclo orthoesters with a bulky and electron‐withdrawing substituent showed a larger equilibrium monomer concentration. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3159–3167, 2001     

Molecular structure determination of Ni(II) diimine complex and DMA analysis of Ni(II) diimine‐based polyethenes

Dynamic mechanical thermoanalysis showed that polyethene, prepared under suitable polymerization conditions with the Brookhart‐type catalyst dibromo‐N,N′‐1,2‐acenaphthylenediylidenebis[2,6‐bis(1‐methylethyl)benzeneamine]Ni(II)/methylaluminoxane (MAO), behaved like an elastomer, even though no comonomer was added. A structural characterization showed that the polymers contained methyl to hexyl branches and some longer branches. The effect of the polymerization conditions on branching was investigated through variations in the pressure and temperature of the polymerization. Depending on the degree and type of branching, polyethene was either quite amorphous or highly crystalline with a high melting temperature. The solid‐state structure of the catalyst dibromo‐N,N′‐1,2‐acenaphthylenediylidenebis[2,6‐bis(1‐methylethyl)benzeneamine]Ni(II) consisted of two centrosymmetrically related monomeric moieties, where Ni atoms were bridged by two bromide ligands. The Ni atom was five‐coordinated, with a square pyramidal coordination polyhedron. The sixth coordination site of the octahedral geometry was effectively blocked by the isopropyl groups of the 2,6‐C₆H₃(i‐Pr) substituents of the diimine ligand. In solution in the presence of MAO, the longer bridging Ni? Br bonds broke, and the complex dissociated to a monomeric species. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1426–1434, 2001     

Synthesis,kinetic study,and application of Ti[O(CH2)4OCHCH2]4 in ring‐opening polymerization of ε‐caprolactone and radical polymerization

Ti[O(CH₂)₄OCH?CH₂]₄, used for the ring‐opening polymerization (ROP) of ε‐caprolactone, was synthesized through the ester‐exchange reaction of titanium n‐propoxide and 1,4‐butanediol vinyl ether, and its chemical structure was confirmed by nuclear magnetic resonance (¹H NMR) and thermogravimetric analysis (TGA). The mechanism and kinetics of Ti[O(CH₂)₄OCH?CH₂]₄‐initiated bulk polymerization of ε‐caprolactone were investigated. The results demonstrate that Ti[O (CH₂)₄OCH?CH₂]₄‐initiated polymerization of ε‐caprolactone proceeds through the coordination‐insertion mechanism, and all the four alkoxide arms in Ti[O (CH₂)₄OCH?CH₂]₄ share a similar activity in initiating ROP of ε‐caprolactone. The polymerization process can be well predicted by the obtained kinetic parameters, and the activation energy is 106 KJ/mol. Then, the rheological method was employed to investigate the feasibility of producing the crosslinked poly(ε‐caprolactone)‐poly (n‐butyl acrylate) network by using Ti[O(CH₂)₄OCH?CH₂]₄ as the ROP initiator. The tensile test demonstrates that the in situ generated crosslinked PCL‐PBA network in PMMA matrix provides the possibility of ameliorating the tensile properties of PMMA. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7773–7784, 2008     

Functional benzoxazines containing ammonium salt of carboxylic acid: Synthesis and highly activated thermally induced ring‐opening polymerization

1,3‐Benzoxazine monomers having ammonium salt of carboxylic acid have been developed. These 1,3‐benzoxazines 1a and 1b were easily synthesized from the corresponding tetrabutylammonium salts of glycine and β‐alanine, respectively. The glycine‐derived benzoxazine 1a exhibited remarkably high reactivity, which allowed its thermally induced ring‐opening polymerization in bulk at 100 °C, at which N‐methyl‐1,3‐benzoxazine 1d did not undergo the polymerization at all. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011