Electrospun core–sheath fibers for integrating the biocompatibility of silk fibroin and the mechanical properties of PLCL

In the process of preparing core–sheath fibers via coaxial electrospinning, the relative evaporation rates of core and sheath solvents play a key role in the formation of the core–sheath structure of the fiber. Both silk fibroin (SF) and poly(lactide‐co‐ε‐caprolactone) (PLCL) have good biocompatibility and biodegradability. SF has better cell affinity than PLCL, whereas PLCL has higher breaking strength and elongation than SF. In this work, hexafluoroisopropanol (HFIP)‐formic acid (volume ratio 8:2), HFIP and HFIP–dichloromethane (volume ratio 8:2) were used to dissolve PLCL as the core solutions, and HFIP was used to dissolve SF as the sheath solution. Then, core–sheath structured SF/PLCL (C‐SF/PLCL) fibers were prepared by coaxial electrospinning with the core and sheath solutions. Transmission electron microscopy images indicated the existence of the core–shell structure of the fibers, and energy dispersive X‐ray analysis results revealed that the fiber mat with the greatest content of core–shell structure fibers was obtained when the core solvent was HFIP–dichloromethane (volume ratio 8:2). Tensile tests showed that the C‐SF/PLCL fiber mat displayed improved tensile properties, with strength and elongation that were significantly higher than those of the pure SF mat. The C‐SF/PLCL fiber mat was further investigated as a scaffold for culturing EA.hy926 cells, and the results showed that the fiber mat permitted cellular adhesion, proliferation and spreading in a manner similar to that of the pure SF fiber mat. These results indicated that the coaxial electrospun SF/PLCL fiber mat could be considered a promising candidate for tissue engineering scaffolds for blood vessels. Copyright © 2014 John Wiley & Sons, Ltd.     

Advanced design of t and pH dual‐responsive PDEAEMA–PVCL core–shell nanogels for siRNA delivery

The synthesis, characterization, and potential application as gene delivery systems of biodegradable dual‐responsive core–shell nanogels based on poly(2‐diethylaminoethyl) methacrylate (PDEAEMA) and poly(N‐vinylcaprolactam) (PVCL) are reported. These core–shell nanogels, having a PDEAEMA‐based core and a PVCL‐based shell, were synthesized by batch seeded emulsion polymerization. An indepth study of their swelling behavior was carried out, which presented a dual‐dependent thermo‐ and pH sensitivity. Core–shell nanogels synthesized formed complexes spontaneously through electrostatic interactions when mixing with small interfering RNA (siRNA) molecules. Moreover, the core–shell nanogel/siRNA complexes showed higher polyanion exchange resistance compared to that of the PDEAEMA‐based nanogel/siRNA complexes, indicating that the PVCL‐based shell enhanced the stability of the complexes. In vitro siRNA release profiles showed that siRNA release was controlled by the pH of the medium as well as by the crosslinking density of the PVCL‐based shell. These results indicate that dual‐responsive core–shell nanogels synthesized could be potentially useful as gene delivery systems. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3203–3217     

Preparation and characterization of polytetrafluoroethylene‐polyacrylate core–shell nanoparticles

Polytetrafluoroethylene (PTFE)‐polyacrylate core–shell nanoparticles were produced by using PTFE micropowder and acrylate via seeded emulsion polymerization in the presence of fluorosurfactant. The properties of emulsion under various polymerization conditions were investigated and optimized. The chemical composition of the PTFE‐polyacrylate nanoparticles was characterized by Fourier‐transform infrared spectrometry (FTIR). The particle size and core–shell structure of the resulting PTFE‐polyacrylate nanoparticles were confirmed by transmission electron microscopy (TEM). Wettability of the PTFE‐polyacrylate core–shell particles was higher than the pristine PTFE. The formation of this kind of PTFE‐polyacrylate core–shell nanoparticles could improve the compatibility of PTFE with other materials because PTFE is covered by polyacrylate shell, which make them promising in various fields. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation of polyacrylate–polysiloxane core–shell latex particles

Crosslinked polymer seed latexes of butyl acrylate, methyl methacrylate and methacrylic acid were synthesized with ethylene glycol dimethacrylate as a crosslinking agent in a first step. Three different processes of seeded emulsion polymerization were used to prepare an outlayer of polysiloxane on the above seed latex particles: (A) direct anionic polymerization of D₄ (octamethyl tetracyclosiloxane) catalyzed by potassium hydroxide; (B) direct cationic polymerization of D₄ onto the seed catalyzed by dodecylbenzene sulfonic acid; (C) a vinyl-containing polysiloxane prepared by copolymerization of D₄ and vinyl septamethyl tetracyclosiloxane was added before the D₄ cationic polymerization. Characterization by transmission electron microscopy showed that only process C provided satisfactory results. Film hardness was measured, and the latex film from process C demonstrated the lowest hardness of all the films. The mechanism of polymerization is discussed.     

Fabrication of novel core–shell PLGA and alginate fiber for dual‐drug delivery system

Biodegradable fibers for the controlled delivery of anti‐inflammatory agent dexamethasone were developed and studied. Mono and core–shell structure fiber are prepared by wet‐spinning solutions of hydrophobic poly (lactide‐co‐glycolide) and hydrophilic alginic acid shell. The two model drugs, dexamethasone and dexamethasone‐21‐phosphate, were entrapped in core and shell, respectively. These fibers were characterized in terms of morphology, diameters, mechanical properties, in vitro degradation, and drug release. The optical microscopy and scanning electron microscopy photos revealed directly that fibers possessed core–shell structure. The release of dexamethasone and dexamethasone‐21‐phosphate was investigated, and the results showed that alginate shell retarded dexamethasone release significantly in both early and late stages. The core–shell structure fiber release shows a two stage release of dexamethasone and dexamethasone‐21‐phosphate with distinctly different release rates, and minimal initial burst release is observed. The results indicated that the prepared fibers are efficient carrier for both types of dexamethasone. Copyright © 2016 John Wiley & Sons, Ltd.     

Morphological analysis of bead–string shaped and core–shell attapulgite@polystyrene (ATP@PS) particles via emulsion polymerization

A convenient method for the preparation of bead–string shaped and core–shell attapulgite@polystyrene (ATP@PS) composite particles through emulsion polymerization from needle‐shaped attapulgite is reported. The pretreatment of attapulgite with cetyltrimethylammonium bromide (CTAB) in ultrasonic is essential for successful encapsulation and for creating strong interfacial interaction between attapulgite and polystyrene (PS). The different morphologies of the ATP@PS particles, bead–string shaped and core–shell shaped, obtained with different amounts of styrene charges, were characterized by transmission electron microscopy (TEM). Encapsulation mechanisms of the two morphologies were also developed. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis and structure–property relationships of acrylic core–shell particle-toughened epoxy networks

The use of emulsion polymerization to prepare core–shell rubber (CSR) toughening particles with different shell thickness-to-core diameter ratios is described. The conditions leading to controlled particle size and morphology are discussed. The particle shell is crosslinked during the synthesis so that its integrity and morphology are maintained upon curing of the epoxy network. The mixing of the CSR particles with the reactive epoxy and the processing of toughened-epoxy networks are described. The characteristics of each phase and the mechanical properties of the materials are reported. The fracture parameters (K_lc, G_lc) are discussed in relation to the structure of the CSR-particles.     

Preparation of poly(methyl methacrylate)–poly(acrylonitrile‐co‐butadiene) core–shell nanoparticles

Poly(methyl methacrylate)–poly(acrylonitrile‐co‐butadiene) (PMMA–NBR) core–shell structured nanoparticles were prepared using a two‐stage semibatch microemulsion polymerization system with PMMA and NBR as the core and shell, respectively. The Gemini surfactant 12‐3‐12 was used as the emulsifier and found to impose a pronounced influence on the formation of core–shell nanoparticles. The spherical morphology of core–shell nanoparticles was observed. It was found that there exists an optimal MMA addition amount, which can result in the minimized size of PMMA–NBR core–shell nanoparticles. The formation mechanism of the core–shell structure and the interaction between the core and shell domains was illustrated. The PMMA–NBR nanosize latex can be used as the substrate for the following direct latex hydrogenation catalyzed by Wilkinson's catalyst to prepare the PMMA–HNBR (hydrogenated NBR) core–shell nanoparticles. The hydrogenation rate is rapid. In the absence of any organic solvent, the PMMA–HNBR nanoparticles with a size of 30.6 nm were obtained within 3 h using 0.9 wt % Wilkinson's catalyst at 130 °C under 1000 psi of H₂. This study provides a new perspective in the chemical modification of NBR and shows promise in the realization of a “green” process for the commercial hydrogenation of unsaturated elastomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of polymer particles possessing radical initiating sites on the surface by emulsion copolymerization and construction of core–shell structures by a photoinduced atom transfer radical polymerization approach

The crosslinked polystyrene particles possessing photofunctional N,N‐diethyldithiocarbamate groups on their surface were prepared by free‐radical emulsion copolymerization of a mixture of styrene, divinylbenzene and 4‐vinylbenzyl N,N‐diethyldithiocarbamate with redox system as an initiator under UV irradiation. In this copolymerization, the inimer 4‐vinylbenzyl N,N‐diethyldithiocarbamate acted the formation of hyperbranched structures by living radical photopolymerization. The particle sizes (number‐average particle diameter = 214–523 nm) were controlled by varying the feed amount of surfactant and size distributions were relatively narrow. Subsequently, core–shell particles were synthesized by photoinduced atom transfer radical polymerization approach of methyl methacrylate initiated by photofunctional polystyrene particles as a macroinitiator. Such core–shell particles were stabilized sterically by grafted chains in organic solvents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1771–1777, 2007     

Synthesis and characterization of fluorine‐containing polyacrylate latex with core–shell structure by UV‐initiated seeded emulsion polymerization

A core–shell fluorine‐containing polyacrylate emulsion was successfully prepared by UV‐initiated seeded emulsion polymerization in two stages in the presence of two photoinitiators. The water‐soluble photoinitiator for the core polymerization and the oil‐soluble photoinitiator was used for the shell polymerization. Both of the two stage polymerizations could be completed within 15 min and displayed a conversion above 94%. The emulsion and the films were characterized by Fourier transformed infrared spectrometry, transmission electron microscopy, dynamic light scattering, X‐ray photoelectron spectroscopy (XPS), contact angle (CA), and thermogravimetry analysis, respectively. The analysis results indicated that the fluorine‐containing latex particles had very small particle size (40 nm) with a core–shell structure and a narrow particle size distribution. XPS analysis revealed that a gradient concentration of fluorine excited in fluorine‐containing emulsion film from the film–air interface to the film–glass interface. In addition, the film formed from the fluorine‐containing emulsion exhibited not only higher thermal stability but also better hydrophobicity than that of the fluorine‐free emulsion. Copyright © 2010 John Wiley & Sons, Ltd.     

Epoxy composites with ceramic core–shell fillers for thermal management in electrical devices

In this work, a novel core–shell material has been manufactured in order to enhance the thermal conductivity of epoxy‐based composites. The polymer derived ceramics technique has been used to produce fillers whose core is composed of a standard material – silica, and whose outer layer consists of a boron nitride or silicon nitride shell. The synthesized filler was characterized by infrared spectroscopy, X‐ray diffraction, and scanning electron microscopy coupled with an energy dispersive spectroscopy analysis. The successful formation of core–shell structure was proven. Composite samples based on an epoxy resin filled with 31 vol% of synthetized core–shell filler have been investigated in order to determine the effective thermal conductivity of the modified system. The resulting core–shell composite samples exhibited improvements in thermal conductivity of almost 30% in relation to standard systems, making them a promising material for heat management applications. Additionally, the temperature dependence of the thermal conductivity was investigated over a broad temperature range indicating that the thermal behavior of the composite with incorporated core–shell filler is stable. This stability is a crucial factor when considering the potential of using this technology in applications such as electronics and power systems. Copyright © 2017 John Wiley & Sons, Ltd.     

Determining the temperature dependence of the emulsion particle size of polyacrylate core–shell and polystyrene by photon correlation spectroscopy

The dependence of the particle size of a polyacrylate core-shell emulsion on temperature has been investigated in the temperature range of 10–55°C by photon correlation spectroscopy. To compare, the dependence of the particle size of an aqueous suspension of a polystyrene standard on temperature has been also investigated under the same conditions. This showed that as the temperature increases, the particle size of both samples decreases, but the rate of size decrease of the polystyrene standard is larger than that of the polyacrylate core–shell emulsion. By linear regression analysis, two regression equations of both samples have been set up. Furthermore, the apparent moving activation energy has been worked out from the size–temperature data.     

Preparation and properties of thermoresponsive and conductive composite fibers with core‐sheath structure

In this research, thermoresponsive and conductive fibers with core‐sheath structure were fabricated by coaxial electrospinning. For preparing the spinning sheath solution, poly‐(N‐isopropylacrylamide‐co‐N‐methylolacrylamide) (PNN) copolymer having thermoresponsive and cross‐linkable properties was synthesized by free‐radical polymerization using redox initiators; it was then mixed with the conductive poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) at different weight ratios in water. On the other hand, poly(butyl acrylate‐co‐styrene) (PBS) copolymer synthesized by emulsion polymerization was dissolved in chloroform and used as the spinning core solution. After electrospinning, the fibers were treated at 110 °C for 1 h to cross‐link the PNN portion in the sheath for strengthening the fibers. Well‐defined core‐sheath fibers were observed from SEM pictures; the outside and inside (core) diameters were 568 ± 24 and 290 ± 40 nm, respectively, as determined from TEM pictures. The fiber mats were further doped by DMSO to enhance their conductivity. For the fiber mat with the weight ratio of PEDOT:PSS/PNN at 0.20 in the sheath, its surface conductivity could reach 29.4 S/cm. In addition, the fiber mats exhibited thermoresponsive properties that both swelling ratio and electric resistance decreased with temperature. Furthermore, the fiber mats exhibited improved flexibility as evaluated via bending test. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1299–1307     

Methods for the surface functionalization of γ‐Fe2O3 nanoparticles with initiators for atom transfer radical polymerization and the formation of core–shell inorganic–polymer structures

Carboxylic acid capped γ‐Fe₂O₃ nanoparticles were prepared by the standard decomposition of Fe(CO)₅ in di‐n‐octyl ether and oleic acid. Two methods were employed to introduce surface functionality to the nanoparticles. First, a thermally stable, tert‐butyldiphenylsilyl‐protected hydroxyl group was incorporated into the carboxylic acid surfactant used during the synthesis. Subsequent deprotection and transformation installed a 2‐bromopropionyl ester group on the particle surface (the functional‐group‐interchange method). The resulting nanoparticles were 4.53 nm in average diameter and were characterized with IR spectroscopy, transmission electron microscopy (TEM), selected area electron diffraction, and elemental analysis. Second, a 2‐bromopropionyl ester group was installed on the particle surface after synthesis via the exchange of the surface oleic acid with a carboxylic acid containing the desired 2‐bromopropionyl ester unit (the ligand‐exchange method). The resulting nanoparticles were 4.30 nm in average diameter and were characterized with IR spectroscopy, TEM, and elemental analysis. Monitoring the percentage of bromine incorporated into the nanoparticle sample versus the ligand‐exchange reaction time indicated that the number of initiator‐containing carboxylic acids that could be exchanged onto the surface was limited, presumably by the steric size of the 2‐bromopropionyl ester group. Styrene was then polymerized directly off γ‐Fe₂O₃ nanoparticles, and this yielded hybrid core–shell structures. The measurements of the magnetic properties of the samples demonstrated that the magnetism of the core γ‐Fe₂O₃ nanoparticle did not change during the performance of the chemical transformations. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3675–3688, 2005     

Gold‐loading magnetic core–shell organic/inorganic nanocomposites: facile preparation and multiple properties

Magnetic composite nanospheres (MCS) were first prepared via mini‐emulsion polymerization. Subsequently, the hybrid core–shell nanospheres were used as carriers to support gold nanoparticles. The as‐prepared gold‐loading magnetic composite nanospheres (Au‐MCS) had a hydrophobic core embed with γ‐Fe₃O₄ and a hydrophilic shell loaded by gold nanoparticles. Both the content of γ‐Fe₃O₄ and the size of gold nanoparticles could be controlled in our experiments, which resulted in fabricating various materials. On one hand, the Au‐MCS could be used as a T₂ contrast agent with a relaxivity coefficient of 362 mg^?1 ml S^?1 for magnetic resonance imaging. On the other hand, the Au‐MCS exhibited tunable optical‐absorption property over a wavelength range from 530 nm to 800 nm, which attributed to a secondary growth of gold nanoparticles. In addition, dynamic light scattering results of particle sizing and Zeta potential measurements revealed that Au‐MCS had a good stability in an aqueous solution, which would be helpful for further applications. Finally, it showed that the Au‐MCS were efficient catalysts for reductions of hydrophobic nitrobenzene and hydrophilic 4‐nitrophenol that could be reused by a magnetic separation process. Copyright © 2014 John Wiley & Sons, Ltd.     

An emulsifier‐free core–shell polyacrylate/diacetone acrylamide emulsion with nano‐SiO2 for room temperature curable waterborne coatings

An emulsifier‐free core–shell polyacrylate emulsion, containing nano‐SiO₂ nanoparticles in the core and diacetone acrylamide (DAAM) in the shell, has been successfully prepared by emulsifier‐free seeded emulsion polymerization. The effects of reaction temperature, dropping time, nano‐SiO₂ and initiator contents, and variation of the composition of core monomers on the amount of coagulum, particle size, and monomer conversion have been investigated. The particle morphology and the distribution of emulsion particles have been measured by transmission electron microscopy (TEM) and dynamic light scattering. The keto‐carbonyl groups on the surface of the polyacrylate emulsion nanoparticles reacted with adipic dihydrazide (ADH) to form a film with a cross‐linked network structure at room temperature. Therefore, the emulsifier‐free core–shell emulsion could be used as a two‐component room temperature curable waterborne coating. It was also found that the properties of the coating were clearly superior after using the cross‐linker. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation and application of a novel core–shell‐particle‐supported zirconocene catalyst

The use of functional groups bearing silica/poly(styrene‐co‐4‐vinylpyridine) core–shell particles as a support for a zirconocene catalyst in ethylene polymerization was studied. Several factors affecting the behavior of the supported catalyst and the properties of the resulting polymer, such as time, temperature, Al/N (molar ratio), and Al/Zr (molar ratio), were examined. The conditions of the supported catalyst preparation were more important than those of the ethylene polymerization. The state of the supported catalyst itself played a decisive role in both the catalytic behavior of the supported catalyst and the properties of polyethylene (PE). IR and X‐ray photoelectron spectroscopy were used to follow the formation of the supports. The formation of cationic active species is hypothesized, and the performance of the core–shell‐particle‐supported zirconocene catalyst is discussed as well. The bulk density of the PE formed was higher than that of the polymer obtained from homogeneous and polymer‐supported Cp₂ZrCl₂/methylaluminoxane catalyst systems. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2085–2092, 2001     

Synthesis and characterization of silica–polyvinyl imidazole core–shell nanoparticles via combination of RAFT polymerization and grafting‐to method

The silica–polyvinyl imidazole core–shell nanoparticles (silica/PVI NPs) with controlled shell thickness and narrow distribution size were fabricated via “grafting‐to” method. First, O‐ethyl xanthate terminated PVI with various chain lengths was produced via the reversible addition–fragmentation chain transfer (RAFT) polymerization using O‐ethyl‐S‐phenyl dithiocarbonate (EPDC) as RAFT agent. Next, three synthesized PVI of different molecular weights (3.4, 6.6, and 11 kg/mol) were successfully grafted to the methacrylate modified silica NPs from solution by radical mediated grafting‐to method. These core–shell NPs were then characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectrum measurements (XPS), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Polyvinyl imidazole molecular weight, reaction time, polymer concentration, and reaction temperature were all used to control the grafting reaction for PVI grafting densities and shell thicknesses. The highest grafting density obtained was close to 1.2 chains/nm² and was achieved for 3.4 kg/mol PVI at 80°C. The prepared silica/PVINP displayed efficient antifouling properties and stability in concentrated sodium chloride aqueous solutions over a broad pH range for a period of at least 7 days. Copyright © 2017 John Wiley & Sons, Ltd.     

Hyaluronic Acid (HA)‐Based Silk Fibroin/Zinc Oxide Core–Shell Electrospun Dressing for Burn Wound Management

Burn injuries represent a major life‐threatening event that impacts the quality of life of patients, and places enormous demands on the global healthcare systems. This study introduces the fabrication and characterization of a novel wound dressing made of core–shell hyaluronic acid–silk fibroin/zinc oxide (ZO) nanofibers for treatment of burn injuries. The core–shell configuration enables loading ZO—an antibacterial agent—in the core of nanofibers, which in return improves the sustained release of the drug and maintains its bioactivity. Successful formation of core–shell nanofibers and loading of zinc oxide are confirmed by transmission electron microscopy, Fourier‐transform infrared spectroscopy, and energy dispersive X‐ray. The antibacterial activity of the dressings are examined against Escherichia coli and Staphylococcus aureus and it is shown that addition of ZO improves the antibacterial property of the dressing in a dose‐dependent fashion. However, in vitro cytotoxicity studies show that high concentration of ZO (>3 wt%) is toxic to the cells. In vivo studies indicate that the wound dressings loaded with ZO (3 wt%) substantially improves the wound healing procedure and significantly reduces the inflammatory response at the wound site. Overall, the dressing introduced herein holds great promise for the management of burn injuries.     

Electrospun Heparin‐Loaded Core–Shell Nanofiber Sutures for Achilles Tendon Regeneration In Vivo

Achilles tendon reconstruction surgery is the primary clinical method for repairing acute Achilles tendon ruptures. However, the efficacy of the postoperative healing process and the recovery of physiological function are inadequate. This study examines the healing mechanism of ruptured rat Achilles tendons seamed with heparin‐loaded core–shell fiber sutures fabricated via near‐field electrospinning. High‐heparin‐concentration sutures (PPH3.0) perform better than the low‐heparin‐concentration sutures and commercial sutures (CSs). The PPH3.0 suture recruits fewer inflammatory cells and shows good histocompatibility in peritoneal implantation experiments. Staining of the Achilles tendon rupture repair zone demonstrates that a high heparin concentration in sutures reduces immune‐inflammatory responses. Immunohistochemical analysis reveals that the transforming growth factor‐β staining scores of the PPH3.0 sutures are not significantly different from those of the corresponding control group but are significantly different from those of the CSs and non‐heparin‐loaded‐suture groups. According to vascular endothelial growth factor (VEGF) analysis, the concentration of VEGF in the group treated with the PPH3.0 suture increases by 37.5% compared with that in its control group. No significant difference in tension strength is observed between the PPH3.0 group and healthy Achilles tendons. These findings illustrate that this novel method effectively treats Achilles tendon rupture and promotes healing and regeneration.