一步法制备PNIPAAm-g-PAN/PSt载银复合微球及其抗菌性能研究

以AgNO3为金属源,通过乙醇将与聚N-异丙基丙烯酰胺接枝聚丙烯腈/聚苯乙烯（PNIPAAm-g-PAN/PSt）聚合物微球表面酰胺基团配位的银离子（Ag+）还原,一步法制备了PNIPAAm-g-PAN/PSt载银复合微球。通过傅立叶变换红外（FTIR）和紫外-可见光光谱表征发现,由Ag+还原所得的Ag纳米颗粒被成功地固载在PNIPAAm-g-PAN/PSt 微球上;用透射电子显微镜（TEM）对载银微球的大小和形态进行了表征;热重分析（TGA）结果表明,固载在微球表面的银纳米颗粒的含量（质量分数）为12%;抗菌实验结果表明,所制备的载银微球具有抗革兰氏阴性菌的活性。     

Preparation of photocrosslinked sol‐gel composites based on urethane‐acrylic matrix,silsesquioxane sequences,TiO2, and Ag/Au Nanoparticles for use in photocatalytic applications

An acid urethane oligodimethacrylate based on poly(ethylene glycol) was synthesized and used in the preparation of hybrid composites containing silsesquioxane sequences and titania domains formed through sol‐gel reactions along with silver/gold nanoparticles (Ag/Au NPs) in situ photogenerated during the UV‐curing process. The photopolymerization kinetics studied by Fourier transform infrared spectroscopy and photoDSC showed that the photoreactivity of the investigated formulations depends on the amount of titanium butoxide (5–20 wt %) added in the system subjected to UV irradiation. The introduction of 1 wt % AgNO₃/AuBr₃ in formulations slightly improved the degree of conversion but diminished the polymerization rates. The formation of hybrid materials comprising predominantly amorphous TiO₂/SiO₂ NPs, with or without Ag/Au NPs, was confirmed through specific analyses. The evaluation of photocatalytic activity demonstrated that the synthesized hybrid films are suitable for the complete removal of organic pollutants (phenolic compounds) from water under UV irradiation (200–350 min) at low intensity (found in the solar radiation). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1189–1204     

In situ formation of silver nanoparticles within an amphiphilic graft copolymer film

Silver nanoparticles were prepared by UV irradiation from silver salts, such as AgBF₄ or AgNO₃, when dissolved in an amphiphilic film of poly((oxyethylene)₉ methacrylate)‐graft‐poly((dimethyl siloxane)_n methacrylate), POEM‐g‐mPDMS. The in situ formation of silver nanoparticles in the graft copolymer film was confirmed by transmission electron microscopy (TEM), UV‐visible spectroscopy, and wide angle X‐ray scattering (WAXS). The results demonstrated that the use of AgBF₄ yielded silver nanoparticles with a smaller size (～5 nm) and narrower particle distribution when compared with AgNO₃. The formation of silver nanoparticles was explained in terms of the interaction strength of the silver ions with the ether oxygens of POEM, as revealed by differential scanning calorimetry (DSC) and X‐ray photoelectron spectroscopy (XPS). It was thus concluded that a stronger interaction of silver ions with the ether oxygens results in a more stable formation of silver nanoparticles, which produces uniform and small‐sized nanoparticles. DSC and small angle X‐ray scattering (SAXS) data also showed the selective incorporation and in situ reduction of the silver ions within the hydrophilic POEM domains. Excellent mechanical properties of the nanocomposite films (3–5 × 10⁵ dyn/cm²) were observed, mostly because of the confinement of silver nanoparticles in the POEM chains as well as interfaces created by the microphase separation of the graft copolymer film. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1283–1290, 2007     

A Facile Preparation of Highly Thermally Stable Silver Nanoparticles Using PS‐b‐P4VP‐b‐PS Triblock Copolymer as Multidentate Ligand

Silver nanoparticles (Ag NPs) of improved thermal stability against long‐term aggregation were prepared using the polystyrene‐b‐poly(4‐vinylpyridine)‐b‐polystyrene (PS‐b‐P4VP‐b‐PS) triblock copolymer as a multidentate ligand. First, PS‐b‐P4VP‐b‐PS was synthesized by sequential reversible addition–fragmentation transfer (RAFT) polymerization of styrene and 4‐vinylpydine using a trithiocarbonate chain transfer agent (CTA). Then Ag NPs were obtained by in situ reduction of silver nitrate using PS‐b‐P4VP‐b‐PS as a multidentate ligand. The obtained Ag NPs were stable in solution for at least 24 h while being heated at 110°C. The effect of the molar ratio of N atoms of the P4VP chain segment and AgNO₃ on the stability of Ag NPs was studied, and the results suggested that Ag NPs were very stable even if the molar ratio of N atoms of the P4VP chain segment and AgNO₃ was very low. This method is promising to scale up the preparation of metal NPs with good dispersibility and thermal stability, which still remains challenging. To further improve its thermal stability, 1,4‐dibromobutane was used to chemically crosslink the P4VP chain segment in solution. However, the results proved that the crosslink method is infeasible to further improve the thermal stability of Ag NPs in this system.     

Antibacterial ultrafiltration membrane with silver nanoparticle impregnation by interfacial polymerization for ballast water

Interfacial polymerization technology was employed to immobilize silver (Ag) nanoparticles on the surface of commercial polyethersulfone (PES) membrane to develop antibacterial and antifouling ultrafiltration membrane. Ag nanoparticles were prepared from the reduction of silver nitrate (AgNO₃) by sodium borohydride in the presence of polyethyleneimine (PEI) as the stabilizer. The encapsulated Ag nanoparticles in the PEI solution were embedded into the PEI membrane when trimesoyl chloride solution was used to crosslink the PEI solution with the PES membrane, forming Ag-polyamide (PA) networks through the interfacial polymerization reaction. Experimental results showed that the membrane prepared with 50 mmol/L of AgNO₃ and 20 mmol/L of PEI had the optimized antibacterial effect against Escherichia coli. Bacterial concentration and species were also investigated. Exiguobacterium aestuarii and Staphylococcus aureus which are gram-positive bacteria, needed significantly more time for the Ag-PA/PES membrane to kill the bacteria completely when compared to E.coli and Vibrio coralliilyticus which are gram-negative bacteria. This study showed that Ag nanoparticles impregnated in membrane surfaces were 100% effective in killing various types of marine bacteria and bacteria in the seawater collected off Sentosa Island in Singapore. These membranes exhibit excellent antibacterial and antifouling properties which can be used to kill bacteria in ballast water and seawater.     

The preparation and characterization of silver‐loading cellulose acetate hollow fiber membrane for water treatment

Silver‐loading asymmetric cellulose acetate (CA) hollow fiber membrane was spun via the dry jet‐wet spinning technique. The spinning solution was prepared by dissolving AgNO₃ and CA in N,N‐dimethylformamide (DMF). The silver ions were reduced in the spinning dope into silver nano‐particles. The morphology of the resulting hollow fibers was examined using a scanning electron microscope and the silver content in the fiber was measured using an inductively coupled plasma atomic emission spectrometer. The antibacterial activities were evaluated. These hollow fibers had a sponge‐like structure and dense inner and outer surfaces. At a 50 k magnification, the pore on the skin layer was not observable, while the nodule size was smaller than 10 nm. The residual silver content of as‐spun hollow fiber was about 60% of the original silver added in the polymer solution. After immersing in water bath for 180 days, the silver content in the bulk of the hollow fibers decreased to 60% and the silver content on the surface reduced to 10%, yet still showed antibacterial activity against Escherichia coli and Staphylococcus aureus. After permeating with water for 5 days, the silver content in the hollow fibers decreased, and did not show antibacterial activity against E. coli and S. aureus. Thus, silver content must be periodically replenished after permeation. The proper range of AgNO₃ in the spinning solution for CA hollow fiber should be about 100–1000 ppm. Copyright © 2005 John Wiley & Sons, Ltd.     

A Simple and Fast Aqueous‐Phase Synthesis of Ultra‐Highly Concentrated Silver Nanoparticles and Their Catalytic Properties

A simple and fast synthetic route to ultra‐highly concentrated silver nanoparticles with long‐term stability by reducing AgNO₃ with ascorbic acid in the presence of polyethyleneimine (PEI) as a stabilizer in an aqueous phase is reported. The concentration of silver precursor was as high as 2000 mm (200 g of Ag nanoparticle per liter of water) and the reaction time was less than 10 min. The resulting silver nanoparticles show long‐term stability after two months of storage at room temperature without any signs of particle aggregation or precipitation in an aqueous phase. The successful ligand exchange of PEI‐stabilized silver nanoparticles to polyethylene glycol (PEG) and polyvinylpyrrolidone (PVP) without particle aggregation is also demonstrated. In addition, the catalytic activities of silver nanoparticles stabilized by various stabilizers prepared by the ligand exchange method was investigated. The PEI‐stabilized silver nanoparticles exhibited a higher stability than those of PEG‐ and PVP‐stabilized silver nanoparticles in the diffusion‐controlled catalytic reduction of 4‐nitrophenol to 4‐aminophenol by NaBH₄.     

Effect of amine groups on the synthesis and antibacterial performance of Ag nanoparticles dispersed in aminosilanes-modified silicate

Nanocomposites based on silver (Ag) and organically-modified silicate (Ormosil) were prepared by an in situ reduction method, in which silver nitrate, tetraethoxysilane (TEOS) and aminosilanes with different amine groups acted as precursor, linker and colloidal suspension stabilizers, respectively. The objective of the study was to develop and evaluate aminosilanes-modified silicate impregnated with Ag nanoparticles, in which Ag dispersion is stabilized, to create a composite that protects against biological warfare agents. The physical properties of the Ormosil/Ag nanocomposites were examined using NMR, ESR and SEM spectroscopy, the results of which indicated that the extent of the reduction reaction increases with aminosilanes with a higher number of amine groups. The number of amine groups in the aminosilane has also a strong effect on the size of the resulting Ag particles. The antibacterial effects of the Ormosil/Ag nanocomposites were assessed by the zone of inhibition and plate-counting methods, and an excellent antibacterial performance was discovered.     

Durable antibacterial Ag/polyacrylonitrile (Ag/PAN) hybrid nanofibers prepared by atmospheric plasma treatment and electrospinning

Durable antibacterial Ag/polyacrylonitrile (Ag/PAN) hybrid nanofibers were prepared by atmospheric plasma treatment and electrospinning. Atmospheric helium plasma treatment was first used to reduce the AgNO₃ precursor in pre-electrospinning solutions into metallic silver nanoparticles, followed by electrospinning into continuous and smooth nanofibers with Ag nanoparticles embedded in the matrix. SEM, TEM, and EDX spectra were used to study the structure and surface elemental composition of the nanofibers. Silver nanoparticles, with diameters ranging between 3 and 6 nm, were found to be uniformly dispersed in the nanofiber matrix. The Ag/PAN nanofibers exhibited slow and long-lasting silver ion release, which provided robust antibacterial activity against both Gram-positive Bacillus cereus and Gram-negative Escherichia coli microorganisms.     

Antibacterial Effectiveness of Rice Water (Starch)‐Capped Silver Nanoparticles Fabricated Rapidly in the Presence of Sunlight

Green synthesized silver nanoparticles (AgNPs) have enormous applications. Hence, there is an increasing demand to explore diverse bioresources for AgNP fabrication to make the process more cost‐effective and rapid as possible. Due to the abundantly present hydroxyl groups of rice starch, it provides ideal sites for metal ion complexation and thereby synthesis of nanoparticles with promising activity. So the study was designed to develop rapid, eco‐friendly and cost‐effective method for green AgNP synthesis using boiled rice water starch in the presence of sunlight irradiation. The starch‐capped nanoparticles (sAgNPs) formed in the study were found to have the surface plasmon absorbance at 439 nm. The study showed optimum yield of sAgNPs when 25% rice starch was treated with aqueous 1 mM AgNO₃ for 15 min in the presence of sunlight. Fourier transform infrared spectroscopy analysis provided mechanistic insight into the role of –OH groups of starch in the reduction of AgNO₃ to sAgNPs. On further characterization by X‐ray diffraction analysis, the sAgNPs were identified to have FCC crystal structure. At the same time, high‐resolution transmission electron microscopic analysis showed majority of sAgNPs to have spherical morphology, and dynamic light scattering study revealed the average particle size as 36.3 nm. Further confirmation on presence of AgNPs was carried out by energy‐dispersive X‐ray spectroscopy. Moreover, the sAgNPs exhibited promising antibacterial activity against foodborne pathogens, Salmonella Typhimurium and Staphylococcus aureus.     

Ag nanoparticle-embedded one-dimensional β-CD/PVP composite nanofibers prepared via electrospinning for use in antibacterial material

Ag nanoparticle-embedded one-dimensional β-CD (β-cyclodextrin)/PVP composite nanofibers were prepared using a one-step electrospinning technique. Ag nanoparticles were obtained in the AgNO₃/β-CD/DMF solution, in which silver nitrate been introduced as the precursor, DMF as solvent, β-CD as reducing and capping agent. After electrospinning of the composite solution at room temperature, the β-CD/PVP nanofibers containing Ag nanoparticles were obtained. The electrospun composite solution containning Ag nsnopsrticles were confirmed by UV-visible absorption spectra; the resulting composite nanofibers were characterized by scanning electron microscopy , transmission electron microscopy, and X-ray diffraction. Ag-β-CD/PVP nanofiber exhibits good antibacterial property for Escherichia coli and Staphylococcus aureus. Consequently, we propose that these Ag nanoparticle-embedded 1D-nanostructures prepared via electrospinning may be used as antibacterial material.     

Simultaneous synthesis of silver nanoparticles and poly(2,5‐dimethoxyaniline) in poly(styrene sulfonic acid)

Silver nanoparticles were formed in situ along with poly(2,5‐dimethoxyaniline) (PDMA) in an interconnected network matrix (reactor), comprising the electronic conductive polymer, PDMA, and a polyelectrolyte, poly(styrene sulfonic acid) (PSS), through the simultaneous reduction of Ag⁺ ions and polymerization of 2,5‐dimethoxyaniline. In situ ultraviolet‐visible spectroscopy showed that peaks corresponding to the plasmon resonance of silver nanoparticles at 411 nm and the polaronic transition of PDMA at 438 nm provided evidences for the simultaneous formation of silver nanoparticles and PDMA. Transmission electron microscopy and size distribution analysis revealed the presence of spherical silver nanoparticles with an average diameter of 12 nm in the composite. X‐ray photoelectron spectroscopy showed that the amine units in PDMA changed to imine units upon the formation of silver nanoparticles. A comprehensive mechanism for the formation of the PDMA‐PSS‐Ag nanocomposite is proposed. A 10‐fold increase in the conductivity was noticed for the PDMA–PSS–Ag nanocomposite (1 S/cm) in comparison with the PDMA–PSS composite (0.1 S/cm). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3843–3852, 2006     

Synthesis of core‐shell silver–polyaniline nanocomposites by gamma radiolysis method

Core‐shell silver (Ag)–polyaniline (PAni) nanocomposites have been synthesized by the in‐situ gamma radiation‐induced chemical polymerization method. Aqueous solution of aniline, a free‐radical oxidant, and/or silver metal salt were irradiated by γ‐rays. Reduction of the silver salt in aqueous aniline leads to the formation of silver nanoparticles which in turn catalyze oxidation of aniline to polyaniline. The resultant Ag‐PAni nanocomposites were characterized by using different spectroscopy analyses like X‐ray photoelectron, UV–visible, and infrared spectroscopy. The optical absorption bands revealed that the bands at about 400 nm are due to the presence of nanosilver and the blue‐shifted peak at ～ 555 nm is due to the presence of metallic silver within the PAni matrix. X‐ray diffraction pattern clearly indicates the broad amorphous polymer and the sharp metal peaks. Scanning electron microscopy and transmission electron microscopy of the nanocomposite showed a uniform size distribution with spherical and granular morphology. Thermogravimetric analysis revealed that the composites have a higher degradation temperature than polyaniline alone. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5741–5747, 2007     

Green synthesis of colloidal silver nanoparticles using natural rubber latex extracted from Hevea brasiliensis

Colloidal silver nanoparticles were synthesized by an easy green method using thermal treatment of aqueous solutions of silver nitrate and natural rubber latex (NRL) extracted from Hevea brasiliensis. The UV–Vis spectra detected the characteristic surface plasmonic absorption band around 435 nm. Both NRL and AgNO₃ contents in the reaction medium have influence in the Ag nanoparticles formation. Lower AgNO₃ concentration led to decreased particle size. The silver nanoparticles presented diameters ranging from 2 nm to 100 nm and had spherical shape. The selected area electron diffraction (SAED) patterns indicated that the silver nanoparticles have face centered cubic (fcc) crystalline structure. FTIR spectra suggest that reduction of the silver ions are facilitated by their interaction with the amine groups from ammonia, which is used for conservation of the NRL, whereas the stability of the particles results from cis-isoprene binding onto the surface of nanoparticles. Therefore natural rubber latex extracted from H. brasiliensis can be employed in the preparation of stable aqueous dispersions of silver nanoparticles acting as a dispersing and/or capping agent. Moreover, this work provides a new method for the synthesis of silver nanoparticles that is simple, easy to perform, pollutant free and inexpensive.     

Preparation of polypyrrole‐graft‐poly(N‐isopropylacrylamide)/silver nanocomposites from pyrrolyl‐capped macromonomer by AgNO3 and their stimuli responsibility of light emission

Pyrrolyl‐capped poly(N‐isopropylacrylamide) macromonomers (Py‐PNIPAM) were prepared through reversible addition‐fragmentation‐transfer polymerization with benzyl 1‐pyrrolylcarbodithioate as chain‐transfer agent. Polymerizations of Py‐PNIPAM with/without pyrrole using AgNO₃ as oxidizing agent and dimethylforamide as solvent resulted in graft copolymers of polypyrrole‐graft‐poly(N‐isopropylacrylamide) (PPy‐g‐PNIPAM) as well as silver nanoparticles, leading to the formation of PPy‐g‐PNIPAM/silver nanocomposites. The resulting nanocomposites were soluble in water when the content of PPy was low, and when the molar ratio of Py/Py‐PNIPAM increased to 30, the resulting products became insoluble in water. The resulting nanocomposites had special optical properties because of PPy as well as the temperature‐responsible PNIPAM. The chemical structure and composition of nanocomposite were characterized by ¹H nuclear magnetic resonance spectroscopy, gel permeation chromatograms, fourier transform infrared spectroscopy, and X‐ray diffraction. Their optical properties were characterized by UV–vis and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6950–6960, 2008     

Preparation of siloxane‐based urethane dimethacrylates carrying carboxylic groups and the effect of silver nanoparticles on the properties of composite polymer films

This work reports on the synthesis of three acid oligosiloxane‐urethane dimethacrylates and their use to obtain hybrid nanocomposite films, in which the presynthesized silver nanoparticles (NPs) were incorporated before photopolymerization, or produced via in situ photoreduction of the silver nitrate (AgNO₃) precursor into the formulation, without any conventional reducing agent. All samples were characterized by ¹H NMR, FT‐infrared and UV spectroscopies, photodifferential scanning calorimetry (photo‐DSC), transmission electron microscopy (TEM), and energy‐dispersive X‐ray (EDX) analysis. Fourier transformed infrared spectroscopy and photo‐DSC results showed that dimethacrylates having hydrophilic segment of poly(ethylene oxide) type in structure are more reactive than the acid oligosiloxane dimethacrylate. When another urethane dimethacrylate is taken as a comonomer, the photopolymerization rate (0.112–0.132 s^?1) and the degree of conversion (82–93%) significantly increased. Experimental evidence of the existence of nanosilver into the polymer matrix generated upon UV irradiation has been supported by UV spectroscopy, EDX and TEM analysis, the last allowing a visualization of the formation of silver NPs with size between 2 and 15 nm. Mechanical parameters and wettability of the photocrosslinked films are also discussed in the prospect of further potential applications in the biomedical field. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Single‐chain nanoparticles with well‐defined structure via intramolecular crosslinking of linear polymers with pendant benzoxazine groups

Controlled intramolecular collapse of linear polymer chains with crosslinkable groups is an efficient way to prepare single‐chain nanoparticles in the size range of 5–20 nm. However, the nature of the crosslinking group is critical. In present study, poly(styrene‐co‐chloromethyl styrene) [P(St‐co‐CMS)] was synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization and then was converted into polystyrene azide (PS? N₃). Polystyrene containing benzoxazine side groups [P(St‐co‐BS)], which can be used as the precusor for the later intramolecular collapse, was obtained from PS? N₃ and 3‐(4‐(prop‐2‐ynyloxy)phenyl)‐3,4‐dihydro‐2H‐benzo[e][1,3]oxazine (P‐APPE) via the method of click chemistry. The sub‐20 nm polymeric nanoparticles with well‐defined structure via thermally intramolecular crosslinking of P(St‐co‐BS) were prepared. The structure change from the linear polymers to the single‐chain nanoparticles was confirmed by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), and gel permeation chromatography (GPC). The morphology and the dimension of the nanoparticles were characterized by using transmission electron microscope (TEM), atomic force microscopy (AFM), as well as dynamic light scattering (DLS). The results reveal that the size of the nanoparticles can be regulated by changing the molecular weight of the precursors and the amount of pendant benzoxazine groups by the use of controlled polymerization techniques. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of Ag/C fiber with nanostructure through in situ thermally induced redox reaction between PVA and AgNO3 and its catalysis for 4‐nitrophenol reduction

A novel synthesized Ag/C fibrous catalyst based on in situ thermally induced redox reaction of PVA/AgNO₃ composite fibers was proposed. Utilizing the plasticization and complexation of AgNO₃ solution, the melt spinning of PVA/AgNO₃ composites was accomplished. Through the in situ thermally induced redox reaction on PVA/AgNO₃ composite fibers combined with carbonization of PVA and reduction of Ag+, the synthesized Ag/C fibrous catalyst was prepared with nanosilver particles with average diameter of 130 nm immobilized on the loose microstructural carbon layers. The synthesized Ag/C fibrous catalyst exhibited excellent catalytic activity and reused for at least five cycles for the reduction of 4‐nitrophenol, which may hold great promise in effective and eco‐friendly waste water treatment.     

The oxidative polymerization of p‐phenylenediamine with silver nitrate: Toward highly conducting micro/nanostructured silver/conjugated polymer composites

The oxidative polymerization of p‐phenylenediamine with silver nitrate by using various oxidant/monomer mole ratios in aqueous solutions of both acetic and nitric acid was studied experimentally and computationally. The produced micro/nanostructured conducting poly(p‐phenylenediamine)–silver composites, reaching the conductivities >10⁴ S/cm, were characterized by conductivity and density measurements, gel permeation chromatography, transmission electron microscopy, UV–visible, FTIR, and Raman spectroscopies. The highest conductivity was 31,700 S/cm for poly(p‐phenylenediamine) base–silver (81.4 wt % Ag). The unexpected increase of conductivity after deprotonation of polymer component is discussed on the basis of interfacial electrical barriers and their removal. Theoretical study of the mechanism of p‐phenylenediamine oxidation has been based on the AM1 semi‐empirical quantum chemical computations of the heat of formation of the reaction intermediates, taking into account the influence of pH and solvation effects. Quantum chemical predictions of molecular structure of poly(p‐phenylenediamine) were correlated with spectroscopic findings. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of Ag nanoparticles termini‐protected side‐chain liquid crystalline azobenzene polymers by RAFT polymerization

A new synthetic approach to prepare Ag nanoparticles protected side‐chain liquid crystalline (LC) azobenzene polymers was reported. It is based on the reduction of silver ions in presence of a LC polymer polymerized by RAFT. The formation of Ag colloidal nanoparticles was confirmed by TEM and UV analysis. At the same time, according to the results of DSC, XPS, and FTIR spectra, Ag nanoparticles were protected by the side‐chain LC azobenzene polymers through surface attachment interactions between thiol groups and Ag. The out‐plane orientation of side‐chain LC is confirmed by surface‐enhanced Raman spectra analysis and scanning near‐field optical microscope, resulting from the large electromagnetic field arising from the excitation of surface plasmon polariton of Ag nanoparticles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5380–5386, 2007