Water‐mediated transport in ion‐containing polymers

Water‐mediated ion conduction enables high conductivity in hydrated polymer membranes commonly used in electrochemical devices. Understanding the coupling of the absorbed water with the polymer matrix and the dynamics of water inside the polymer network across the full range of length scales in the membrane is important for unraveling the structure–property relationships in these materials. By considering the water behavior in ion‐containing polymers, next‐generation fuel cell membranes are being designed that exceed the conductivity of the state‐of‐the‐art materials and have optimized conductivity and permeability that may be useful in other types of devices such as redox flow batteries. Water–polymer associations can be exploited to tune the transport and mechanical property tradeoffs in these polymers. Measurements of water motion provide important criteria for assessing the factors that control the performance of these types of materials. This review article discusses current understanding of water behavior in ion‐containing polymers and the relationship between water motion and ion and molecular transport. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Moisture–absorption,dielectric relaxation,and thermal conductivity studies of polymer composites

In the search for new packaging materials for the electrical/electronics industry, three types of polymer composites have been studied. Silicone/boron nitride powders, polyurethane/alumina powders, and polyurethane/carbon fibers have all been synthesized to study the moisture–absorption kinetics, thermal conductivities, and the dielectric loss spectra under various levels of humidity. The water uptake data indicate that water molecules are absorbed not only by the polymer matrix, but also by the interfaces introduced by the fillers. For all materials, the dielectric relaxation spectroscopy shows the presence of a peak in the 175–200 K range, which is largely due to absorbed water. The silicone/boron nitride samples absorbed the least amount of moisture. Incorporating this result with the thermal conductivity data of the three types of polymer composites, it is concluded that silicone polymers embedded with boron nitride can best serve as the coating for the electronic devices that require heat dissipation and moisture resistance, in addition to electrical insulation. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 2259–2265, 1998     

Interactions of hydrophilic plasticizer molecules with amorphous starch biopolymer—an investigation into the glass transition and the water activity behavior

In this article, we demonstrated that within a hydrophilic biopolymer–plasticizer system, the molecular “activity” of the plasticizer also influenced the extent of these interactions. We demonstrated through an analysis of crystallinity and calorimetry results that the equilibrium moisture content within the starch matrix can preferentially interact with the hydrophilic plasticizers and modify the polymer recrystallization process to an extent that the commonly acknowledged relationship between the crystallinity and the glass transition behavior is disrupted. Two plasticizers, glycerol (three ? OH groups) and xylitol (five ? OH groups), were selected. The water sorption isotherm of polymer samples with 5–20 wt % (dry basis) plasticizers were examined across a water activity range from ～0.11 to ～0.95 and using Guggenheim‐Anderson‐de Boer analysis, we compared the molar sorption enthalpies of various starch–plasticizer mixtures. Finally, the competitive plasticization between water and plasticizer molecules at different water activities was also discussed using known glass transition models. The analyses validated the antiplasticization limit for glycerol to be ～10–15 wt %, but for xylitol, its antiplasticization behavior did not manifest till 20 wt %. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Precipitation polymerization of aniline in the presence of water‐soluble organic acids

The precipitation polymerization of aniline in the presence of organic acids, including toluene‐4‐sulfonic acid, phenylphosphonic acid, 4‐aminophenylphosphonic acid, and acetophosphonic acid, led in one step to conductive polyaniline. The polyaniline showed very good affinity for water and was easily modified to be water‐soluble. In comparison with the widely studied postpolymerization of doped polyaniline, this reaction allowed reasonably good conductivity to be achieved at a lower acid/polyaniline ratio. Moreover, the easy in situ incorporation of the dopant into the polymer structure caused high stability of the created salt; that is, no dedoping was observed after it was washed with water, methanol, or other solvents. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3562–3569, 2002     

Equilibrium statistics of weakly slip‐linked Gaussian polymer chains

We calculate the free energy and the pressure of a weakly slip‐linked Gaussian polymer chains. We show that the equilibrium statistics of a slip‐linked system is different from one of the corresponding ideal chain system without any constraints by slip‐links. It is shown that the pressure of a slip‐linked system decreases compared with the ideal system, which implies that slip‐linked chains spontaneously form aggregated cluster‐like compact structures. These are qualitatively consistent with previous theoretical analyses or multichain simulations. We also show that repulsive potentials between chains, which have been phenomenologically utilized in simulations, can cancel the artificial pressure decrease. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

New polyimides incorporated with diphenylpyrenylamine unit as fluorophore and redox‐chromophore

A series of novel polyimides based on N,N‐di(4‐aminophenyl)‐1‐aminopyrene and aromatic or alicyclic tetracarboxylic dianhydrides were synthesized. The polymers exhibited good solubility in many polar organic solvents and could afford robust films via solution casting. The polyimides derived from aromatic dianhydrides exhibited high thermal stability and high glass‐transition temperatures (333–364 °C). Cyclic voltammetry studies of the polymer films showed that these polyimides are both p and n dopable and have multicolored electrochromic states. For the polyimides derived from alicyclic dianhydrides, they revealed a strong blue‐light emission with high fluorescence quantum yields (?_PL > 45%) and a marked solvatochromic behavior. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Combining renewable gum rosin and lignin: Towards hydrophobic polymer composites by controlled polymerization

Rosin polymer–grafted lignin composites were prepared via “grafting from” atom transfer radical polymerization (ATRP) with the aid of 2‐bromoisobutyryl ester‐modified lignin as macroinitiators. Three different monomers derived from dehydroabietic acid (DA) were used for execution of grafting from ATRP, while DA was separately attached onto lignin by a simple esterification reaction. Kinetic studies indicated controlled and “living” characteristics of all monomer polymerizations. Thermal studies indicated that rosin polymer–grafted lignin composites exhibited glass transition temperatures in a broad temperature range from ～20 to 100°C. The grafting of both DA and rosin polymers significantly enhanced hydrophobicity of lignin. Static contact angle measurement of water droplets showed ～90° for all these rosin modified lignin composites. X‐ray photoelectron spectroscopy demonstrated that the surface of rosin–lignin composites was dominated with chemical compositions originating from the hydrocarbon rich rosin moiety. The impartation of hydrophobicity of rosin into lignin provided excellent water resistance of this class of renewable polymers, as all rosin‐modified lignin composites showed water uptake below 1.0 wt %. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Water sorption characteristics of poly(2‐hydroxyethyl acrylate)/silica nanocomposite hydrogels

Water sorption in hydrogels based on nanocomposites of poly(2‐hydroxyethyl acrylate) (PHEA) and silica, prepared by simultaneous polymerization and sol‐gel process, were studied gravimetrically over wide ranges of silica content, both below and above the percolation threshold of about 15% wt for the formation of a continuous inorganic network interpenetrated with the organic network. Measurements were performed at room temperature from the vapor phase, both at equilibrium and dynamic, for selected values of water activity α_w between 0 and 0.95, and from the liquid phase. In the nanocomposite hydrogels, the overall water uptake from the vapor phase is practically the same as in pure PHEA below the percolation threshold, whereas it is reduced above the percolation threshold, in particular at high α_w values where swelling becomes significant. Water clustering sets in at around 14 vol % (10 wt %) of water independently of composition, whereas the mean value of water molecules in a cluster decreases at high silica contents. In immersion experiments water uptake decreases as silica content increases to the percolation threshold of about 15 wt % and is then almost independent of composition. A scheme is proposed, which explains these results in terms of the existence of micelles, where a number of hydrophilic hydroxy groups are linked together, and their disentaglement by immersion into water. Diffusion coefficients of water depend on water content and are reduced on addition of silica above the percolation threshold. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

The preparation of polyaniline/polypyrrole conductive polymer films on polycarbonate‐coated Pt electrodes

In this study, free‐standing polymer films were obtained first with an electrochemical coating of polyaniline and then with a coating of polypyrrole on an insulating polycarbonate‐coated Pt electrode. The films contained varying amounts of polyaniline and polypyrrole obtained by varying the electrolysis time, and their conductivities were determined. The Raman spectra of the films taken from the electrode side were similar to those of pure polyaniline, whereas the spectra of the solution side were identical to those of pure polypyrrole. The resistance change in the films between −15 and +120°C revealed that the films were sensitive to temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 51–59, 2000     

Tuning the mechanical properties in model nanocomposites: Influence of the polymer‐filler interfacial interactions

This article presents a study of the polymer‐filler interfacial effects on filler dispersion and mechanical reinforcement in Polystyrene (PS)/silica nanocomposites by direct comparison of two model systems: ungrafted and PS‐grafted silica dispersed in PS matrix. The structure of nanoparticles has been investigated by combining small angle neutron scattering measurements and transmission electronic microscopic images. The mechanical properties were studied over a wide range of deformation by plate–plate rheology and uni‐axial stretching. At low silica volume fraction, the particles arrange, for both systems, in small finite size nonconnected aggregates and the materials exhibit a solid‐like behavior independent of the local polymer‐fillers interactions suggesting that reinforcement is dominated by additional long range effects. At high silica volume fraction, a continuous connected network is created leading to a fast increase of reinforcement whose amplitude is then directly dependent on the strength of the local particle–particle interactions and lower with grafting likely due to deformation of grafted polymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Water‐resistant conducting hybrids from electrostatic interactions

Conductive hybrids were prepared in a water/ethanol solution via the sol–gel process from an inorganic sol containing carboxyl groups and water‐borne conductive polyaniline (cPANI). The inorganic sol was prepared by the hydrolysis and condensation of methyltriethoxysilane with the condensed product of maleic anhydride and aminopropyltriethoxysilane as a catalyst, for which the carboxyl counterion along the cPANI backbone acted as an electrostatic‐interaction moiety. The existence of this electrostatic interaction could improve the compatibility of the two components and contribute to the homogeneous dispersion of cPANI in the silica phase. The electrostatic‐interaction hybrids displayed a conductivity percolation threshold as low as 1.1 wt % polyaniline in an emeraldine base, showing 2 orders of magnitude higher electrical conductivity than that without electrostatic interactions. The electrostatic‐interaction hybrids also showed good water resistance; the electrical conductivity with a cPANI loading of 16 wt % underwent a slight change after 14 days of soaking in water. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1424–1431, 2007     

Application of free‐volume theory to self diffusion of solvents in polymers below the glass transition temperature: A review

Theories based on free‐volume concepts have been developed to characterize the self and mutual‐diffusion coefficients of low molecular weight penetrants in rubbery and glassy polymer‐solvent systems. These theories are applicable over wide ranges of temperature and concentration. The capability of free‐volume theory to describe solvent diffusion in glassy polymers is reviewed in this article. Two alternative free‐volume based approaches used to evaluate solvent self‐diffusion coefficients in glassy polymer‐solvent systems are compared in terms of their differences and applicability. The models can correlate/predict temperature and concentration dependencies of the solvent diffusion coefficient. With the appropriate accompanying thermodynamic factors they can be used to model concentration profiles in mutual diffusion processes that are Fickian such as drying of coatings. The free‐volume methodology has been found to be consistent with molecular dynamics simulations. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Polyaniline/iron nanocomposites prepared by cryomilling

The polyaniline/iron nanocomposites with both conducting and magnetic properties have been prepared by cryomilling (high‐energy ball milling under cryogenic temperature), in which the average size of iron grains attains 20 nm. Enhanced coercivity of 206 Oe and decreased conductivity of 0.1 S cm^?1 at room temperature have been obtained for the nanocomposites containing 10% volume fraction of iron in polyaniline after cryomilling for 20 h. The high value of the coercivity could be considered due to the presence of a fraction of single‐domain particles in the nanocomposites. The low value of the conductivity could be considered due to the dedoping of conducting polyaniline with the cryomilling time. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3157–3164, 2006     

Absorption and engulfing transitions in nanoparticle infiltration into a polymer brush: A monte carlo simulation

We study the structure of an infiltrating hard spherical nanoparticle into a polymer brush using extensive off‐lattice Monte Carlo simulations of a basic theoretical model. We show that as long as the spherical particle is coated with a surface layer that interacts attractively with brush monomers, it can penetrate deeply into a dense polymer brush near the grafting surface. The infiltration process contains two stages: diffusing nanoparticle absorbing onto the surface of the polymer brush and engulfing of the nanoparticle by polymer chains. After the nanoparticle fully immerses in the dense polymer brush region, the buoyant forces levels off because of symmetric repulsions that endows increasing nanoparticle mobility and encourages the second transition. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Thermodynamics of interaction between sodium bis(2‐ethylhexyl) sulfosuccinae and polymers in aqueous solutions by isothermal titration microcalorimetry

The interactions between sodium bis(2‐ethylhexyl) sulfosuccinae (AOT) and two nonionic water‐soluble polymers, including polyvinyl pyrrolidone (PVP) and polyethylene glycol (PEG) have been investigated by using isothermal titration microcalorimetry in aqueous solutions at 298.15 K. The results show that the critical aggregation concentration, which corresponding to the first turning point in the curve of experimental interaction heat versus concentration of the surfactant, is lower than the critical micellar concentration (cmc), confirming the existence of polymer‐surfactant interactions. The value of cac is not sensitive to the relative amount of polymer in low concentration range of the polymer. The mono‐layer saturated adsorption concentration, which corresponding to the second turning point, rises as the polymer concentration is increased. The interaction between PVP and AOT is stronger than that between PEG and AOT. The results also indicate that the aggregation of AOT in water and polymers solutions is entropically driven. The observed thermal effects have been interpreted in terms of the interactions of the polymer molecules with AOT monomers or the molecular clusters. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 275–283, 2006     

Stability of polyaniline in air and acidic water

Polyaniline is a member of the class of electrically conducting polymers, having possible commercial applications such as coatings. Aqueous‐based polyaniline coatings are preferred over organic solvent or concentrated strong acid based coatings because water is not a pollutant. The overall goal of this study was to further the development of water‐based polyaniline coatings by an examination of the effect of acidic water (pH 1.18) and air on polyaniline. Knowledge of the effect of water on the structure, molecular weight, electrical conductivity, and diffusion of the dopant assisted in ascertaining whether polyaniline degraded with water exposure. Knowledge of how Fourier transform infrared (FTIR) spectra would be affected by dry air was important for determining if polyaniline was chemically stable with time. The results showed that the molecular weight, ultraviolet–visible and FTIR spectra, and carbon‐to‐nitrogen molar ratio in the polymer backbone all remained unchanged during acidic water immersion. The constant nature of these physical parameters showed a high degree of water stability. A chloride ion diffusion coefficient of 2.8 to 85 × 10^?9 cm²/h, the chloride concentration, and the electrical conductivity were also measured with the water immersion time. Aging polyaniline powders in a desiccator for 5 years showed no effect on the molecular structure, as indicated by the FTIR spectrum. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 807–822, 2003     

Near‐infrared spectroscopy investigation of water effects on the cationic photopolymerization of vinyl ether systems

Real‐time Fourier transform near‐infrared spectroscopy has been used to monitor monomer and water concentrations simultaneously during cationic vinyl ether photopolymerization. The use of near‐infrared peak area methods allows the water content to be conveniently and nondestructively determined in any monomer or polymer for which the water peak has previously been calibrated by gravimetric analysis. Although the shape of the absorption band due to absorbed water in a monomer changes with the quantity of water, the integrated intensity from about 5350 to 4900 cm^?1 can be correlated directly to the water concentration, and this region is well removed from the vinyl‐based absorption at approximately 6190 cm^?1. This approach provides a highly informative, dynamic technique for examining the influence of moisture on polymerization reactions. Significant differences have been observed in the effects of absorbed water on the cationic photopolymerization kinetics of vinyl ether monomers with or without an ? OH group. Along with the rapid consumption of water coupled to vinyl ether polymerization, acid‐catalyzed hydrolysis reactions have also been spectroscopically observed, giving rise to the formation of aldehyde groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1985–1998, 2004     

Origin and influence of water‐induced chain relaxation phenomena in chitosan biopolymers

Chain dynamics, probed by dielectric spectroscopy, provide a route to further understanding of the molecular interactions induced by hydration, degree of crosslinking, and microstructural changes occurring on swelling of biopolymers such as chitosan, which is becoming a focus for biomedical engineering and therapeutic delivery. The basis of the β‐wet relaxation peak is established as segmental chain relaxation between chitosan water bridges and related to its hysteresis induced by microstructural changes during wetting and dewetting cycles. Linear expansion probes the hysteresis arising from bridging water interactions during the hydration–dehydration paths which is also shown in the resultant ionic conductivity. β‐wet relaxation and ionic conductivity exhibit identical hysteresis behavior with both degrees of chemical crosslinking and water contents. X‐ray diffraction shows that the degree of crosslinking and hydration also influences the degree of disorder of the polymer chains changing both the crystalline phase fraction and lattice dimensions. These molecular interactions provide power law behavior between β‐wet relaxation dynamics and ionic mobility over five orders of magnitude for all degrees of chemical crosslinking and water bridging which is independent of the significant hysteresis in these properties indicative of scaling behavior within the noncrystalline gel phase. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

A molecular dynamics simulation study of three polysulfones in dry and hydrated states

Molecular dynamics (MD) simulations of three polysulfones (poly(ether sulfone) PESU, poly(phenylene sulfone) PPSU and polysulfone PSU) in dry and hydrated states were undertaken in order to study the specific interactions between water and glassy polymer matrices of the same structural family. Dry polysulfone models were generated using a hybrid pivot Monte Carlo‐MD single‐chain sampling technique and the resulting relaxed densities were found to be in close agreement with experimental data. Hydrated systems are found to reproduce quite well volumetric changes experimentally observed. The concentrations of sulfonic groups can explain qualitatively their different water solubilities. Water is preferentially hydrogen‐bonded to two sites which either link two polymer sites, or one polymer site and another water, or two other waters. A detailed analysis of these water bridges that are formed is presented. Only a small quantity of potential bridging sites are occupied for water contents near the experimental saturation. The free fractional volumes, the probe accessible volumes, the swelling of the polymers, the water‐polymer interactions and the hydrogen bond lifetimes, are also presented for these polysulfones. Water‐water interactions and water clusters are found to be more important in the more hydrophilic PESU in comparison to the less hydrophilic PSU. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010