Synergistic effect of cocondensed nanosilica in intumescent flame‐retardant polypropylene

Amino‐functionalized nanosilica (SiO₂‐NH₂) was prepared through cocondensation method using aminopropyltriethoxysilane as comonomer to hydrolyze and cocondense with tetraethylorthosilicate. The synergistic effect of combination of ammonium polyphosphate and pentaerythritol with SiO₂‐NH₂ on the thermal and flame‐retardant properties of intumescent flame‐retardant (IFR) polypropylene (PP) has been investigated by thermogravimetric analysis (TGA), scanning electron microscopy, Raman spectra, X‐ray diffraction (XRD), limiting oxygen index (LOI), and UL 94 tests. When 1.0 wt.% SiO₂‐NH₂ was added, the LOI value of the PP/IFR composite with 25 wt.% of IFR increased from 26.6% to 31.7%, while the UL 94 rating raised from not classified to V‐0. The TGA data demonstrated that the SiO₂‐NH₂ nanoparticles increased the charred residue of the PP/IFR composites. The morphological structures and the orderliness of the charred residue proved that SiO₂‐NH₂ promoted the formation of compact intumescent charred layer, which effectively protected the underlying polymer from burning. The XRD patterns of the charred residue indicated that nanosilica reacted with APP to form SiP₂O₇ crystal structure during combustion, which was beneficial to the formation of compact charred layers. In comparison with the inorganic SiO₂‐cal nanoparticles, the amino‐functionalized nanosilica revealed much more efficient synergistic flame‐retardant effect due to the difference of surface properties.     

Joint‐aggregation intumescent flame‐retardant effect of ammonium polyphosphate and charring agent in polypropylene

In order to explore the structure mode of intumescent flame retardants (IFRs) with higher efficiency, IFR particles with joint‐aggregation structure (@IFR) were obtained through the treatment of ammonium polyphosphate (APP) and a charring agent (PT‐Cluster) in their aqueous solution. Then, the joint‐aggregation IFR effect was researched using its application in polypropylene. In case of 20 wt% IFR loading, the limiting oxygen index (LOI) value of @IFR/PP was 1.1% higher than that of 15APP/5PT‐Cluster/PP mixture, and a 1.6 mm‐thick @IFR/PP composite passed the UL 94 V‐2 rating test, while 15APP/5PT‐Cluster/PP demonstrated no flame‐retardant rating in UL 94 vertical burning tests. In a cone calorimeter test, @IFR also had a better inhibition effect on heat release. The average heat release rate (av‐HRR) value during 0 to 120 seconds of @IFR/PP was only 41 kW m^?2, which was 33.9% lower than that of the 15APP/5PT‐Cluster/PP. Furthermore, the peak heat release rate (pk‐HRR) of @IFR/PP was 20.5% lower than that of 15APP/5PT‐Cluster/PP, and the time to pk‐HRR of @IFR/PP was 710 seconds, while that of 15APP/5PT‐Cluster/PP was 580 seconds. The better inhibition effect on HRR and the delay of time to pk‐HRR were caused by the joint‐aggregated structure of @IFR, which can rapidly react to form stable and efficient char layers. This kind of join‐aggregation IFR effect has great significance in suppressing the spread of fire in reality. In addition, @IFR also increased the mechanical properties of PP composites slightly compared with the APP/PT‐Cluster mixture.     

Effects of metal oxides on intumescent flame‐retardant polypropylene

Variable amounts of transition metal oxides (MO), such as MnO₂, ZnO, Ni₂O₃, etc., were incorporated into blends of polypropylene (PP)/ammonium polyphosphate (APP)/dipentaerythritol (DPER) with the aim of studying and comparing their effects with main‐group MO on intumescent flame retardance (IFR). The PP/IFR/MO composites were prepared using a twin‐screw extruder, and the IFR behavior was evaluated through oxygen index and vertical burning tests. The progressive enhancement of flame retardancy has proved to be strongly associated with the interaction between APP and MO. With the aid of thermogravimetry (TG) analysis, Fourier transform infrared (FTIR) spectra and scanning electron microscopy, Ni₂O₃ has been shown to be the most effective among the aforementioned three MO. The flame‐retardant mechanism of the IFR system is also discussed in terms of catalytic charring, which relates to complex formation through the d‐orbitals of the transition metal elements. It is considered that the melt viscosity of a PP/APP/DPER blend containing Ni₂O₃ corresponds well to the gas release with increasing temperature. Copyright © 2009 John Wiley & Sons, Ltd.     

Fire hazard suppression of intumescent flame retardant polypropylene based on a novel Ni‐containing char‐forming agent

Reducing the fire hazard of polypropylene (PP) is an important research direction in the fields of fire safety materials. In this article, a novel Ni‐containing char‐forming agent (TTPN) was successfully synthesized, using tris(2‐hydroxyethyl) isocyanurate (THEIC), terephthalic acid, and nickel dihydrogen phosphate. Then, TTPN was combined with the silica‐gel microencapsulated ammonium polyphosphate (OS‐MCAPP) to prepare intumescent flame retardant PP composites. From the results of the limiting oxygen index (LOI) test and cone calorimeter, the composite containing 30% IFR (OS‐MCAPP: TTPN = 3:2) shows the highest LOI value of 33.5%, and its peak heat release rate is 275.5 kWm^?2, decreased by 79.0% and 37.4% than those of pure PP and the composite containing the char‐forming agent without Ni. Meanwhile, the composite containing TTPN present the best smoke and CO₂/CO suppression. The results indicate that TTPN has an excellent ability to dramatically reduce the fire hazard of PP.     

The synergistic flame‐retardant effect of O‐MMT on the intumescent flame‐retardant PP/CA/APP systems

The flame retardancy of a novel intumescent flame‐retardant polypropylene (IFR‐PP) system, which was composed of a charring agent (CA), ammonium polyphosphate (APP), and polypropylene (PP), could be enhanced significantly by adding a small amount (1.0 wt%) of an organic montmorillonite (O‐MMT). The synergistic flame‐retardant effect was studied systematically. The thermal stability and combustion behavior of the flame‐retarded PP were also investigated by thermogravimetric analysis (TGA), limiting oxygen index (LOI), vertical burning test (UL‐94), scanning electronic microscopy (SEM), and cone calorimeter test (CCT). TGA results demonstrated that the onset decomposition temperatures of IFR‐PP samples, with or without O‐MMT, were higher than that of neat PP. Compared with IFR‐PP, the LOI value of IFR‐PP containing 1.0 wt% O‐MMT was increased from 30.8 to 33.0, and the UL‐94 rating was also enhanced to V‐0 from V‐1 when the total loading of flame retardant was the same. The cone calorimeter results showed that the IFR‐PP with 1.0 wt% of O‐MMT had the lowest heat release rate (HRR), total heat release (THR), total smoke production (TSP), CO production (COP), CO₂ production (CO₂P), and mass loss (ML) of all the studied IFR‐PP samples, with or without O‐MMT. All these results indicated that O‐MMT had a significantly synergistic effect on the flame‐retardancy of IFR‐PP at a low content of O‐MMT. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation of piperazine cyanurate by hydrogen‐bonding self‐assembly reaction and its application in intumescent flame‐retardant polypropylene composites

Piperazine cyanurate (PCA) is designed and synthesized via hydrogen‐bonding self‐assembly reactions between piperazine and cyanuric acid. Chemical structure and morphology of PCA are investigated by Fourier transform infrared spectroscopy and scanning electron microscopy, respectively. The prepared PCA is combined with ammonium polyphosphate (APP) to prepare flame‐retardant polypropylene (PP) composites. Thermostability, flammability, and combustion characteristics of PP composites are analyzed. The maximum thermal decomposition rate of flame‐retarded PP composites has an apparent reduction compared with that of pure PP, and obvious char is left for this intumescent flame retardant (IFR) system of APP and PCA. A high limiting oxygen index value and UL‐94 V‐0 rating are achieved with addition of APP and PCA. In cone calorimetry test, heat and smoke releases of PP are significantly decreased by this IFR system. Gaseous decomposition products during the thermal decomposition of flame‐retardant composites are studied. Chemical structure and morphology of char residues are analyzed. The results illustrate that APP and PCA have a superb synergistic action in the aspect of improvement in fire safety of PP. A possible flame‐retardant mechanism is concluded to reveal the synergism between APP and PCA.     

A new intumescent flame‐retardant: preparation,surface modification,and its application in polypropylene

Melamine salt of tripentaerythriol phosphate (MTP), as a new intumescent flame‐retardant, was prepared from tripentaerythritol (TPE), polyphosphoric acid, phosphoric pentoxide, and melamine, and then incorporated into polypropylene (PP) to obtain flame‐retarded PP‐MTP. FT‐IR analysis showed that MTP was in the form of cage structure. The flammability, combustion behavior, and thermal degradation and stability of flame‐retarded PP were characterized by using LOI, UL‐94 test, cone calorimetry, and TGA, respectively. By SEM, the char structure of PP‐MTP was analyzed. XRD diffraction tests showed that PP‐matrix of PP‐MTP presented better crystallized phases, when MTP was modified by methyl hydrogen siloxane. The relations of the dispersion of MTP in PP matrix to the compatibility between PP and MTP, and to the flame retardancy were discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of a novel ionic liquid containing phosphorus and its application in intumescent flame retardant polypropylene system

A novel ionic liquid containing phosphorus ([PCMIM]Cl) was synthesized and characterized by FTIR, ¹H NMR, ¹³C NMR and ³¹P NMR. Moreover, a new intumescent flame retardant (IFR) system, which was composed of [PCMIM]Cl and ammonium polyphosphate (APP), was used to impart flame retardancy and dripping resistance to polypropylene (PP). The flammability and thermal behaviors of intumescent flame‐retarded PP (PP/IFR) composites were evaluated by limiting oxygen index (LOI), UL‐94 test, thermogravimetric analysis (TGA) and cone calorimeter test. It was found that there was an obvious synergistic effect between [PCMIM]Cl and APP. When the weight ratio of [PCMIM]Cl and APP was 1:5 and the total amount of IFR was kept at 30 wt%, LOI value of PP/IFR composite reached 31.8, and V‐0 rating was obtained. Moreover, both the peak heat release rate and the peak mass loss rate of PP/IFR composites decreased significantly relative to PP and PP/APP composite from cone calorimeter analysis. The TGA curves suggested that [PCMIM]Cl had good ability of char formation, and when combined with APP, it could greatly promote the char formation of PP/IFR composites, hence improved the flame retardancy. Additionally, the rheological behaviors and mechanical properties of PP/IFR composites were also investigated, and it was found that [PCMIM]Cl could also serve as an efficient lubricant and compatibilizer between APP and PP, endowing the materials with satisfying processability and mechanical properties. Copyright © 2013 John Wiley & Sons, Ltd.     

Flame retardancy and thermal degradation of intumescent flame retardant polypropylene material

The flame retardancy and thermal degradation properties of polypropylene (PP) containing intumescent flame retardant additives, i.e. melamine pyrophosphate (MPyP) and charring‐foaming agent (CFA) were characterized by limiting oxygen index (LOI), UL 94, cone calorimeter, microscale combustion calorimetry, and thermogravimetric analysis (TGA). It has been found that the PP material containing only MPyP does not show good flame retardancy even at 30% additive level. Compared with the PP/MPyP binary system, the LOI values of the PP/MPyP/CFA ternary materials at the same additive loading are all increased, and UL 94 rating is raised to V‐0 from no rating (PP/MPyP). The cone calorimeter results show that the heat release rate and mass loss rate of some ternary materials decrease in comparison with the binary material. The microscale combustion calorimetry results indicate that the sample containing 22.5 wt% MPyP and 7.5 wt% CFA has the lowest heat release rate among all samples. The TGA results show that the thermal stability of the materials increases with the addition of MPyP, while decreases with the addition of CFA. Copyright © 2009 John Wiley & Sons, Ltd.     

Functionalized ZrP nanosheet with free‐radical quenching capability and its synergism in intumescent flame‐retardant polypropylene

The combination of catalyzing carbonization and free‐radical quenching mechanism is proposed to be a promising strategy for the preparation of high‐efficiency flame‐retardant polypropylene (PP). Herein, a novel functionalized zirconium phosphate (RQZrP) nanosheet with free‐radical quenching capability was fabricated by decorating macromolecular N‐alkoxy hindered amine (MNOR) onto the surface of ZrP. It was combined with an intumescent flame retardant (IFR) to flame‐retard PP. The results showed that there was a good synergism between RQZrP and IFR, which effectively improved the fire safety of PP. When the content of RQZrP was 2 wt% and IFR was 23 wt%, the limiting oxygen index (LOI) of PP increased from 19.0% to 33.0%, and it achieved a UL‐94 V‐0 rating. Meanwhile, the peak heat release rate (PHRR), total heat release (THR), carbon monoxide production (COP), and carbon dioxide production (CO₂P) were significantly decreased. It revealed that nitroxyl radicals generated by RQZrP could capture alkyl radicals and peroxy radicals that produced during the degradation and combustion of PP. Meanwhile, RQZrP acted as a solid acid that catalyzed PP chains rapidly cross‐linking to form char on its surface, and it also played as a supporting skeleton to enhance the strength and compactness of the char layer, thus effectively preventing the transmission of heat, oxygen, and combustible gases.     

Flame‐retardancy and anti‐dripping effects of intumescent flame retardant incorporating montmorillonite on poly(lactic acid)

In the present study, the effects of intumescent flame retardant (IFR) incorporating organically modified montmorillonite (O‐MMT) on the flame retardancy and melt stability of PLA were investigated. The flame‐retardant PLA was prepared using a twin‐screw extruder and a two roll mill. Then, the influence of IFR and MMT on flame retardancy and melt stability was thoroughly investigated by means of limiting oxygen index (LOI), vertical burning test, thermogravimetric analysis, scanning electronic microscopy, melt flow index (MFI), and parallel plate rheological experiments. The experimental results show that the IFR system in combination with MMT has excellent fire retardancy, i.e. the sample could achieve a UL94 V‐0 rating and LOI value increases from 20.1 for pristine PLA to 27.5 for the flame‐retarded PLA. MFI and rheological measurement indicate that O‐MMT significantly enhances the melt stability and suppresses the melt dripping. Copyright © 2009 John Wiley & Sons, Ltd.     

An investigation into synergistic effects of rare earth oxides on intumescent flame retardancy of polypropylene/poly (octylene‐co‐ethylene) blends

Synergistic effects of two kinds of rare earth oxides (REOs), neodymium oxide (Nd₂O₃) or lanthanum oxide (La₂O₃) on the intumescent flame retardancy of thermoplastic polyolefin (TPO) made by polypropylene/poly (octylene‐co‐ethylene) blends were investigated systemically by various methods. The limiting oxygen index (LOI) of flame retardant TPO (FRTPO) filled by 30 wt% intumescent flame retardants (IFR) composed of ammonium polyphosphate (APP) and pentaerythritol (PER) has been increased from 30 to 32.5 and 33.5 when 0.5 wt% of IFR was substituted by La₂O₃ and Nd₂O₃, respectively. Cone calorimetry tests also reveal the existence of synergistic effects. Thermalgravimetric analyses (TGA) demonstrate that the presence of REOs promotes the esterification and carbonization process in low‐temperature range while enhances the thermal stability of IFR and FRTPO in high‐temperature range. X‐ray diffraction (XRD) reveals that the interaction of Nd₂O₃ with IFR results in the formation of neodymium phosphate (NdP₅O₁₄) with high‐thermal stability. Thermal scanning rheological tests show that the presence of REOs increases complex viscosity of FRTPO in the temperature range of 190～300°C so as to suppress melt dripping but decreases the complex viscosity and increases the loss factors tan δ in temperature range of 300～400°C to make the carbonaceous strucuture more flexible and viscous to resist stress, expand better and keep intact. Copyright © 2009 John Wiley & Sons, Ltd.     

Synergistic effects of 4A zeolite on the flame retardant properties and thermal stability of a novel halogen‐free PP/IFR composite

The synergistic effects of 4A zeolite (4A) on the thermal degradation, flame retardancy and char formation of a novel halogen‐free intumescent flame retardant polypropylene composites (PP/IFR) were investigated by the means of limiting oxygen index (LOI), vertical burning test (UL‐94), digital photos, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), cone calorimeter test (CCT), laser Raman spectroscopy (LRS) and X‐ray photoelectron spectroscopy (XPS). It was found that a small amount of 4A could dramatically enhance the LOI value of the PP/IFR systems and the materials could pass the UL‐94 V‐0 rating test. Also, it could enhance the fire retardant performance with a great reduction in combustion parameters of PP/IFR system from CCT test. The morphological structures observed by digital and SEM photos revealed that 4A could promote PP/IFR to form more continuous and compact intumescent char layer. The LRS measurement, XPS and TGA analysis demonstrated that the compactness and strength of the outer char surface of the PP/IFR/4A system was enhanced, and more graphite structure was formed to remain more char residue and increase the crosslinking degree. Copyright © 2013 John Wiley & Sons, Ltd.     

Flame retardancy and thermal degradation of intumescent flame retardant polypropylene with MP/TPMP

The performances of the novel intumescent flame retardant (IFR) polypropylene (PP) composites containing melamine phosphate (MP) and tris(1‐oxo‐2,6,7‐trioxa‐1‐phosphabicyclo[2,2,2]methylene‐4)phosphate (TPMP) were investigated. The flame retardancy of IFR‐PP system was characterized by limiting oxygen index (LOI) and UL 94 and cone calorimeter. The morphology of the char obtained after cone calorimeter testing was studied by scanning electron microscopy (SEM). The thermal oxidative degradation (TOD) of the composites was investigated by using thermogravimetric analysis (TGA) and real‐time Fourier transform infrared spectroscopy (RT‐FTIR). Compared with the PP/ TPMP or PP/ MP binary composite, at the same addition level, the LOI values of the PP/MP/TPMP ternary composites increase and reach V‐0 at the suitable MP/TPMP ratio. The results of TGA and RT‐FTIR showed the existence of the interaction between IFR and PP. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of polysiloxane and silane‐modified SiO2 on a novel intumescent flame retardant polypropylene system

The effects of polysiloxane and silane‐modified SiO₂ (M‐SiO₂) on properties of intumescent flame retardant polypropylene (IFR‐PP) have been studied. The results demonstrate that both polysiloxane and M‐SiO₂ could effectively enhance the flame retardancy of the IFR‐PP, despite only 20 wt% loading of IFRs. Remarkably, the polysiloxane can clearly improve the water resistance of IFR‐PP. It can obtain UL‐94 V‐0 rating, and its LOI remains over 34% after the water treatment. The surface tension data, XPS data, and SEM sufficiently prove that the some of polysiloxane transfers to the IFR‐PP surface during processing. The TGA data show that the polysiloxane more effectively enhances the thermal stability of the IFR‐PP at high temperature and increases the char residue. The CONE results reveal that the polysiloxane can clearly change the decomposition behavior of PP and markedly reduce flammability parameters. The homogenous and compact intumescent char layers further confirm that polysiloxane is a very effective silicon‐containing additive for the flame retardancy and water resistance of the IFR‐PP. Copyright © 2010 John Wiley & Sons, Ltd.     

Synergistic effect between phosphorus tailings and aluminum hypophosphite in flame‐retardant thermoplastic polyurethane composites

The massive accumulation of phosphorus tailings (PT) not only occupies land resources and also causes great threat to ecological environment and human security. It is of great significance to explore the resource utilization of PT in some fields. Herein, aluminum hypophosphite (AHP) and PT are blended together to enhance the flame retardancy of thermoplastic polyurethane (TPU) composites, and the synergistic effects between AHP and PT are investigated systematically. Cone calorimeter test (CCT) results indicate that the peak heat release rate (PHRR) and total heat release (THR) of the samples containing 25 wt% AHP are decreased by 89% and 68%, respectively, and the total smoke release (TSR) show a reduction of 58.8%, in comparison with those of neat TPU. For the sample TPU/22.5AHP/2.5PT, the PHRR, THR, and TSR are decreased by 91.2%, 70%, and 63%, respectively. Scanning electron microscopy (SEM) analysis results demonstrate that the addition of PT can facilitate the generation of dense and compact char layers, preventing the release of heat and smoke effectively. All the abovementioned results indicate that the synergistic effects are existed between AHP and PT for enhancing the fire safety of TPU composites, which can provide a new way for the utilization of PT.     

Effect of anion of polyoxometalate based organic–inorganic hybrid material on intumescent flame retardant polypropylene

In this work, 12‐tungestocobaltic acid based organic–inorganic hybrid material, [Bmim]₆CoW₁₂O₄₀ (CoW) was synthesized and applied as a synergist in polypropylene (PP)/intumescent flame retardant (IFR) composites. The flame retardant properties were investigated by the limiting oxygen index (LOI), UL‐94 vertical burning test, thermal gravimetric analyzer (TGA), cone calorimeter and scanning electron microscopy (SEM) etc. The results showed that the PP composites with 16 wt% IFR and 1 wt% CoW achieves the UL‐94 V‐0 rating and gets a LOI value 28.0. However, only add no less than 25 wt% single IFR, can the PP composites obtain the UL‐94 V‐0 rating, which suggests that CoW has good synergistic effects on flame retardancy of PP/IFR composites. In addition, the SEM and cone calorimeter tests indicated the CoW improves the quality of char layer. The rate of char formation has been enhanced also because of the existence of CoW. It is the combination of a better char quality and a high rate of char formation promoted by CoW that results in the excellent flame retardancy of PP/IFR composites. Copyright © 2016 John Wiley & Sons, Ltd.     

Photocrosslinking and related properties of intumescent flame‐retardant LLDPE/EVA/IFR blends

The photoinitiated crosslinking of halogen‐free flame retarded linear low density polyethylene/poly(ethylene‐co‐vinyl acetate) blends (LLDPE/EVA) with the intumescent flame retardant (IFR) of phosphorous‐nitrogen compound (NP) in the presence of photoinitiator and crosslinker and their characterization of related properties have been investigated by gel determination, heat extension test, cone calorimeter test (CCT), thermogravimetric analysis (TGA), Fourier transfer infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), mechanical properties measurements, limiting oxygen index (LOI), UL‐94, and water resistance test. The data from the gel content and heat extension rate (HER) show that the LLDPE/EVA/IFR blends filled with NP are readily crosslinked to a gel content of above 75% and the HER values reach about 50% by UV‐irradiation of 5 sec under suitable amount of photoinitiator and crosslinker. The data obtained from the CCT and LOI indicate that photocrosslinking can considerably decrease the heat release rates (HRR) by 10–15%, prolongate the combustion time, and increase two LOI values for the LLDPE/EVA/NP blends UV irradiated for 5 sec. The results from TGA and the dynamic FTIR spectra give the evidence that the photocrosslinked LLDPE/EVA/NP samples show slower thermal degradation rate and higher thermo‐oxidative degradation temperature than the uncrosslinked LLDPE/EVA/NP samples. The morphological structures of charred residues observed by SEM give the positive evidence that the compact charred layers formed from the photocrosslinked LLDPE/EVA/NP samples play an important role in the enhancement of flame retardant and thermal properties. The data from the mechanical tests and water‐resistant measurements show that photocrosslinking can considerably improve the mechanical and water‐resistant properties of LLDPE/EVA/NP samples. Copyright © 2011 John Wiley & Sons, Ltd.     

Synergistic effects of aluminum hypophosphite on intumescent flame retardant polypropylene system

The effects of aluminum hypophosphite(AHP) as a synergistic agent on the flame retardancy and thermal degradation behavior of intumescent flame retardant polypropylene composites(PP/IFR) containing ammonium polyphosphate(APP) and triazine charring-foaming agent(CFA) were investigated by limiting oxygen index(LOI), UL-94 measurement, thermogravimetric analysis(TGA), cone calorimeter test(CONE), scanning electron microscopy(SEM) and X-ray photoelectron spectroscopy(XPS). It was found that the combination of IFR with AHP exhibited an evident synergistic effect and enhanced the flame retardant efficiency for PP matrix. The specimens with the thickness of 0.8 mm can pass UL-94 V-0 rating and the LOI value reaches 33.5% based on the total loading of flame retardant of 24 wt%, and the optimum mass fraction of AHP/IFR is 1:6. The TGA data revealed that AHP could change the degradation behavior of IFR and PP/IFR system, enhance the thermal stability of the IFR and PP/IFR systems at high temperatures and promote the char residue formation. The CONE results revealed that IFR/AHP blends can efficiently reduce the combustion parameters of PP, such as heat release rate(HRR), total heat release(THR), smoke production rate(SPR) and so on. The morphological structures of char residue demonstrated that AHP is of benefit to the formation of a more compact and homogeneous char layer on the materials surface during burning. The analysis of XPS indicates that AHP may promote the formation of sufficient char on the materials surface and improve the flame retardant properties.