声空化泡对声传播的屏蔽特性*

该文介绍了声空化液体中声波被反常吸收的现象,即驱动声压越大,吸收越强,远场声压越低。研究给出其物理机理是高声压导致强空化,空化泡吸收驱动能量辐射高次谐波,高频声波更易被液体吸收,最终形成更低的远场声压。为了克服空化屏蔽,改善声空化的均匀性,提出了改变工作液体的空化阈值的思路。并就简单的双层液体系统进行了计算和实验,结果证实这种思路的正确性。     

超声滚压中的空化现象*

在超声滚压加工中引入切削液后可能会产生空化现象,由此产生的微射流和冲击波对超声表面强化将有积极作用。为研究超声滚压加工中空化现象是否存在及空化效应在超声滚压中的作用,本文首先分析了超声滚压中的空化阈值,然后进行了染色法试验和超声滚压后试样氧元素能谱分析,最后通过超声滚压加工对比试验研究了空化效应对加工后材料表面粗糙度和显微硬度的影响。研究发现,超声滚压加工中的声压幅值远大于空化阈值,满足空化存在的必要条件;超声滚压中发生了明显的卡纸染色现象,引入切削液后工件超声滚压加工表面氧元素含量显著提高,表明超声滚压中发生了空化现象。超声滚压加工中的空化效应能进一步降低工件表面粗糙度和提高表面显微硬度,有利于提高工件表面强化质量。本研究为空化效应在超声滚压中的积极利用提供了依据。     

Cavitation erosion by shockwave self-focusing of a single bubble

The ability of cavitation bubbles to effectively focus energy is made responsible for cavitation erosion, traumatic brain injury, and even for catalyse chemical reactions. Yet, the mechanism through which material is eroded remains vague, and the extremely fast and localized dynamics that lead to material damage has not been resolved. Here, we reveal the decisive mechanism that leads to energy focusing during the non-spherical collapse of cavitation bubbles and eventually results to the erosion of hardened metals. We show that a single cavitation bubble at ambient pressure close to a metal surface causes erosion only if a non-axisymmetric energy self-focusing is at play. The bubble during its collapse emits shockwaves that under certain conditions converge to a single point where the remaining gas phase is driven to a shockwave-intensified collapse. We resolve the conditions under which this self-focusing enhances the collapse and damages the solid. High-speed imaging of bubble and shock wave dynamics at sub-picosecond exposure times is correlated to the shockwaves recorded with large bandwidth hydrophones. The material damage from several metallic materials is detected in situ and quantified ex-situ via scanning electron microscopy and confocal profilometry. With this knowledge, approaches to mitigate cavitation erosion or to even enhance the energy focusing are within reach.     

Cavitation in holographic sQGP

We study the possibility of cavitation in the non-conformal N=^2?SU(N) theory which is a mass deformation of N=4SU(N) Yang-Mills theory. The second order transport coefficients are known from the numerical work using AdS/CFT by Buchel and collaborators. Using these and the approach of Rajagopal and Tripuraneni, we investigate the flow equations in a (1+1)-dimensional boost invariant set up. We find that the string theory model does not exhibit cavitation before phase transition is reached. We give a semi-analytic explanation of this finding.     

Cavitation induced Becquerel effect

The observation of an electrical current upon the ultraviolet (UV) illumination of one of a pair of identical electrodes in liquid water, called the Becquerel effect, was made over 150 years ago. More recently, an electrical current was found if the water surrounding one electrode was made to cavitate by focused acoustic radiation, the phenomenon called the cavitation induced Becquerel effect. Since cavitation is known to produce UV light, the electrode may simply absorb the UV light and produce the current by the photo-emission theory of photoelectrochemistry. But the current was found to be semi-logarithmic with the standard electrode potential which is characteristic of the oxidation of the electrode surface in the photo-decomposition theory, and not the photo-emission theory. High bubble collapse temperatures may oxidize the electrode, but this is unlikely because melting was not observed on the electrode surfaces. At ambient temperature, oxidation may proceed by chemical reaction provided a source of vacuum ultraviolet (VUV) radiation is available to produce the excited OH* states of water to react with the electrode. The source of VUV radiation is shown to be the spontaneous emission of coherent infrared (IR) radiation from water molecules in particles that form in bubbles because of surface tension, the spontaneous IR emission induced by cavity quantum electrodynamics. The excited OH* states are produced as the IR radiation accumulates to VUV levels in the bubble wall molecules.     

超声空化现象影响因素的实验研究

超声空化在许多不同的学科和工业生产中有着广泛的应用。超声空化的应用与声场的分布及空化的机理密切相关,精准地反映空化场和空化机理是超声空化技术实际应用的关键。该文通过分析采集的声信号和金属箔膜空蚀法对空化区域随液位发生变化的现象进行研究,并利用Matlab对金属箔膜空蚀程度量化。实验发现,超声波会在液面与实验箱体底部形成驻波场。在某一液体温度下,随着液位高度的变化,超声空化现象的出现具有周期性。并且,在同一液位下,当超声功率改变时,空化区域强度分布情况随之改变。小功率时各空化区域空化强度分布均匀,当功率增大到一定时,会出现空化屏蔽现象。该研究为超声清洗设备的改良提供了借鉴,对进一步认识和利用超声空化效应具有重要意义。     

Cavitation onset caused by a dynamic pressure wave in liquid pipelines

When liquids flow in the pipelines, the onset of cavitation can be characterized by a variant of the Euler number known as the cavitation number (CN), which is based on the velocity and denoted by C in this paper. Conventionally, cavitation is considered to be induced when C ~ 1. However, experimental observations and several pipe bursts indicate that the CN may incorrectly predict the onset of cavitation. For example, when leakage occurs in the pipeline or a valve in the pipeline is opened, the resultant pressure loss generates a dynamic pressure wave with a small amplitude, which may lead to bubble formation, even though C ~ 1 is not satisfied. Hence, this paper proposes another CN based on the amplitude of the generated dynamic pressure wave, rather than the velocity, for ascertaining the onset of cavitation. The validity of the proposed CN was verified through experiments and a case study. The results indicated that the proposed CN can be effectively used for cavitation prediction induced by pressure fluctuations and for investigating phenomena such as pressure fluctuation, leakage, and corrosion in liquid pipelines, tanks, and pressure vessels, as well as the safety design of liquefied natural gas tanks and tankers.     

Cavitation intensity of water under practical ultrasonic cleaning conditions

When measuring cavitation during cooling of thermally degassed water cavitation maxima are frequently observed at various temperatures. Relations between this phenomenon and frequency and power of ultrasounds as well as air content in water have been examined. It was found out that the secondary water regassing with air is the reason.     

部分流低温流体循环泵空化性能预测

为了对部分流低温流体(液氮)循环泵空化特性进行预测.基于软件ANSYS-FLUENT,计算选用Stardard k-ε湍流模型,Simplec压力耦合方式,进行空化前MRF模型定常计算,添加两相流参数,选取Singhal-et-al空化模型,添加两相参数,考虑液-气密度比对低温流体液氮泵内能量的传递和交换的影响,得到气液动量、质量和能量守恒方程,利用RNG k-ε湍流模型,Simplec压力耦合方式,对不同进液压力条件下,部分流低温流体(液氮)循环泵空化特性进行全流域空化数值计算.进行泵空化特性试验,在额定转速下,随着泵前流体压力的降低呈现的空化性能,数值计算与试验测得的泵头数值最大偏差在10%以内,曲线吻合性较好,泵内流场空化发生伴有显著的压头下降,空化过程增强,空化区变大,液相和汽相相互拖拽能力增强,空化核心区由叶顶背压部分扩散到整个流道,汽液界面不清晰,直至断流.本文采用的计算方法和研究结果为低温流体循环泵内部流体空化的诊断和性能优化提供了一定依据.     

Cavitation dose in an ultrasonic cleaner and its dependence on experimental parameters

The aluminum foil erosion method is widely used in cavitation activity studies of ultrasonic cleaners. However, owing to its limited sensitivity, it is difficult to observe the effects of various experimental parameters on the cavitation activity using this method. In the present work, a higher-sensitivity method for quantifying cavitation activity as a cavitation dose based on passive cavitation detection was presented. The influences of various factors (e.g., insonation duration, driving power, gas content, temperature and cleaning agents) were studied for this system. The results showed that the cavitation dose became unstable over long insonation times, and that the instability was more significant at high power. Generally, the cavitation activity could be enhanced by increasing the power, gas content, and the concentration of a cleaning agent. However, due to the exhaustion of the cavitation gas nuclei, the cavitation activity might tune to saturate of even decrease slightly when some impact parameters (e.g., acoustic driving power, gas content and the concentration of the cleaning agent) are above a certain level of each of these parameters.     

Cavitation activity stimulation by low frequency field pulses

The influence of a short-time action of a low-frequency ultrasound on the sonoluminescence generation by a high frequency pulsed field has been studied. This action remarkably lowers the cavitation thresholds and increases the sonoluminescence intensity. The stimulating effect of the low-frequency field action depends on its duration and on the intensities of both fields. Possible mechanisms of this effect are discussed.     

汽化滞后的毛细管内流动模型与计算

基于均相流模型,建立了制冷剂在毛细管内绝热流动的数学模型,同时考虑了管内流动过程中实际存在的汽化滞后问题。针对工质为R22的制冷系统,开发了程序进行流动模拟计算,该程序对于制冷系统毛细管的匹配具有实用价值。     

Cavitation in trees

Sap is transported under tension (i.e. negative pressure) in trees, according to the tension-cohesion theory. Since water is physically instable under negative pressure, a risk of cavitation is possible. Techniques have been developed during the past two decennia to study cavitation in trees. Trees appear remarkably immune to cavitation events. Cavities form only when extreme water stresses occur or when sap freezes. Nucleation is heterogeneous in trees, presumably caused by the aspiration of air bubbles through conduit walls. Threshold xylem pressures for cavitation vary greatly between species, in concordance with the great functional and ecological diversity of trees. To cite this article: H. Cochard, C. R. Physique 7 (2006).     

Cavitation bubble collapse studied at 20 million frames per second

The collapse of laser-induced bubbles in water is investigated by high speed photography at framing rates as high as 20 million frames per second. The case of a spherical bubble in an unbounded liquid is compared with the Gilmore model. Bubbles collapsing in front of a solid wall show a rich dynamics depending on their normalized distance. Unprecedented details are given of the generic sequence of events leading to multiple shock waves and bubble shape metamorphosis upon collapse.     

Cavitation erosion mechanisms in Co-based coatings exposed to seawater

The cavitation erosion (CE) of most materials in seawater is more serious than in fresh water due to the onset of corrosion; however, in a previous study we reported results that contradict this widely accepted trend. In this research our objective is to provide fundamental insight into the mechanisms that may be responsible for these earlier results. To accomplish this objective, two types of Co-based coatings, prepared by high velocity oxygen fuel (HVOF) spraying system, were used to further investigate the underlying corrosion-mitigating CE mechanism in seawater. Accordingly, the influence of spraying parameters on microstructure, composition and mechanical properties of the coatings was analyzed on the basis of SEM, XRD, Raman spectroscopy, Vicker’s hardness and nano-indentation results. Electrochemical corrosion tests were used to evaluate the corrosion behavior of the Co-based coatings. Their CE performances in seawater and deionized water were comparatively studied by a vibratory apparatus. Results demonstrated that a higher flame temperature facilitated the oxides formation with associated improvements in compactness, hardness and toughness of the coatings. The presence of alumina in combination with the oxides formed in-situ facilitated the formation of an oxidation film on surfaces, and effectively enhanced the charge transfer resistance of the coating, thereby significantly improving the corrosion resistance in seawater. Metallic Co was not only more easily oxidized but also more readily corroded than the alloyed Co. Compactness was identified as an important factor affecting CE resistance of coatings in deionized water, because defects facilitate the nucleation and eventual collapse of bubbles. Moreover, bubble collapse produced a transient high temperature spike in excess of 600 °C that also caused Co and Cr elements to oxidize. Because the CE tests were carried out in seawater, additional Co₃O₄ and Cr₂O₃ were generated owing to corrosion that more effectively increased the surface compactness and mechanical properties of the coatings. This behavior was particular notable for coatings with metallic Co and Cr, which should be why seawater corrosion could weaken the CE of Co-based coatings.     

Cavitation erosion mechanism of titanium alloy radiation rods in aluminum melt

Ultrasound radiation rods play a key role in introducing ultrasonic to the grain refinement of large-size cast aluminum ingots (with diameter over 800 mm), but the severe cavitation corrosion of radiation rods limit the wide application of ultrasonic in the metallurgy field. In this paper, the cavitation erosion of Ti alloy radiation rod (TARR) in the semi-continuous direct-chill casting of 7050 Al alloy was investigated using a 20 kHz ultrasonic vibrator. The macro/micro characterization of Ti alloy was performed using an optical digital microscopy and a scanning electron microscopy, respectively. The results indicated that the cavitation erosion and the chemical reaction play different roles throughout different corrosion periods. Meanwhile, the relationship between mass-loss and time during cavitation erosion was measured and analyzed. According to the rate of mass-loss to time, the whole cavitation erosion process was divided into four individual periods and the mechanism in each period was studied accordingly.     

考虑亚稳态的绝热毛细管流动性能的理论研究

采用均相模型建立绝热毛细管数学模型,同时考虑了"闪点延迟"、"壅塞流"现象和毛细管呈螺旋形所产生的局部阻力,利用matlab语言编写计算机程序,对绝热毛细管内的流体流动特性进行模拟计算,并分析研究了毛细管的流动性能。将计算结果与其他学者提供的实验结果进行比较,全部的计算点误差都在±10%以内,达到工程运用的要求,其运用对于制冷系统毛细管的匹配具有一定的参考价值。     

Emergent reaction-diffusion phenomena in capillary tubes

Pattern formation in the Belousov-Zhabotinsky reaction experiments carried out by filling capillary glass tubes with catalyst-immobilized gel for the reaction is reported. Under unperturbed and oscillatory conditions, helicoidal waves appear spontaneously. Quantitative structural data of those helices are obtained by devising an optical tomography technique for extracting rotationally symmetric structures from time-lapse data. Space-time representation of the catalyst oxidation reveals wave transmission phenomenon that is studied further by numerical simulations of a reduced spatial model.     

Cavitation microstreaming and stress fields created by microbubbles

Cavitation microstreaming plays a role in the therapeutic action of microbubbles driven by ultrasound, such as the sonoporative and sonothrombolytic phenomena. Microscopic particle-image velocimetry experiments are presented. Results show that many different microstreaming patterns are possible around a microbubble when it is on a surface, albeit for microbubbles much larger than used in clinical practice. Each pattern is associated with a particular oscillation mode of the bubble, and changing between patterns is achieved by changing the sound frequency. Each microstreaming pattern also generates different shear stress and stretch/compression distributions in the vicinity of a bubble on a wall. Analysis of the micro-PIV results also shows that ultrasound-driven microstreaming flows around bubbles are feasible mechanisms for mixing therapeutic agents into the surrounding blood, as well as assisting sonoporative delivery of molecules across cell membranes. Patterns show significant variations around the bubble, suggesting sonoporation may be either enhanced or inhibited in different zones across a cellular surface. Thus, alternating the patterns may result in improved sonoporation and sonothrombolysis. The clear and reproducible delineation of microstreaming patterns based on driving frequency makes frequency-based pattern alternation a feasible alternative to the clinically less desirable practice of increasing sound pressure for equivalent sonoporative or sonothrombolytic effect. Surface divergence is proposed as a measure relevant to sonoporation.     

Cavitation characteristics analysis of a novel rotor-radial groove hydrodynamic cavitation reactor

Hydrodynamic cavitation was widely used in sterilization, emulsion preparation and other industrial fields. Cavitation intensity is the key performance index of hydrodynamic cavitation reactor. In this study, a novel rotor-radial groove (RRG) hydrodynamic cavitation reactor was proposed with good cavitation intensity and energy utilization. The cavitation performances of RRG hydrodynamic cavitation reactor was analyzed by utilizing computational fluid dynamics method. The cavitation intensity and the cavitation energy efficiency were used as evaluation indicators for RRG hydrodynamic cavitation reactor with different internal structures. The amount of generated cavitation for various shapes of the CGU, interaction distances and rotor speed were analyzed. The evolution cycle of cavitation morphology is periodicity (0.46 ms) in the CGU of RRG hydrodynamic cavitation reactor. The main cavitation regions of CGU were the outflow and inflow separation zones. The cavitation performance of rectangular-shaped CGU was better than the cylindrical-shaped CGU. In addition, the cavitation performance could be improved more effectively by increasing the rotor speed and decreasing the interaction distance. The research results could provide theoretical support for the research of cavitation mechanism of cavitation equipment.