Intracavity second-harmonic generation of 1.06 μm in GdCa4O(BO3)3 crystals

The characteristics of intracavity second-harmonic generation (SHG) at 1.06 μm in GdCa₄O(BO₃)₃ (GdCOB) crystals cut for different type I phase-matching (PM) directions of (θ,φ)=(66.8°, 132.3°); (19.4°, 0°); (90°, 46°) have been investigated. It was found that the intracavity SHG was significantly efficient in the PM direction of (66.8°, 132.3°), and that the intrinsic lower effective nonlinear coefficient (d_eff) was responsible for the less-efficient SHG in the other two directions. A maximum CW SHG output power of 2.81 W was obtained with an optical conversion efficiency of 18.7%, while the corresponding effective intracavity SHG efficiency was determined to be 41.3%. The intracavity SHG efficiency of GdCOB has been found to reach two-thirds of that obtained with type II phase-matching KTiOPO₄ (KTP). Received: 26 April 2000 / Revised version: 3 July 2000 / Published online: 5 October 2000     

Investigation of intracavity third-harmonic generation at 1.06 μm in YCa4O(BO3)3 crystals

Intracavity sum-frequency mixing of 1.06 μm and 532 nm in YCa₄O(BO₃)₃ (YCOB) crystals cut for different type-I phase-matching directions of (θ,ϕ)=(106°,77.2°), (111°, 79.6°) and (65°, 82.8°) was investigated in a compact diode-end-pumped acousto-optical Q-switched Nd:YVO₄/KTP laser formed with a three-mirror folded resonator. The maximum 355-nm average output power of 124 mW was obtained in the phase-matching direction of (106°, 77.2°) with a pump-to-ultraviolet conversion efficiency of 3.3% at the repetition frequency of 20 kHz. Received: 17 September 2001 / Revised version: 27 November 2001 / Published online: 17 January 2002     

Growth and properties of Li,Ta modified (K,Na)NbO3 lead‐free piezoelectric single crystals

Li, Ta modified (K,Na)NbO₃ single crystals with the size of 18 mm × 18 mm × 10 mm were successfully grown by top‐seeded solution growth method, with orthorhombic–tetra‐gonal phase transition temperature ～79 °C and Curie temperature ～276 °C. The electromechanical coupling factors k₃₃ and k_t were found to be ～88% and ～65%, respectively. The piezoelectric coefficient d₃₃ for the [001]_c poled crystals reached 255 pC/N. In addition, the electromechanical coupling factor exhibited high stability over the temperature range of –50 °C to 70 °C, making these lead free crystals good candidates for electromechanical applications. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Antiferromagnetic resonance and magnetic anisotropy in single crystals of the YFe3(BO3)4-GdFe3(BO3)4 system

The antiferromagnetic resonance in single crystals of the YFe₃(BO₃)₄-GdFe₃(BO₃)₄ system is studied in the frequency range 25–140 GHz and the temperature range 4.2–50.0 K. It is established that the YFe₃(BO₃)₄ crystal containing only the magnetic subsystem of Fe³⁺ ions is an antiferromagnet with an easy anisotropy plane. The temperature dependences of the gaps in the antiferromagnetic resonance spectra of GdFe₃(BO₃)₄ and Y _x Gd_{1 ? x} Fe₃(BO₃)₄ are used to calculate the contributions of the Fe³⁺ and Gd³⁺ subsystems to the magnetic anisotropy of these crystals. The contributions are found to be close in magnitude and have opposite signs. This leads to a relatively weak uniaxial anisotropy field in the crystals under investigation. Since the exchange interaction between the Gd³⁺ and Fe³⁺ ions magnetizes the magnetic subsystem of gadolinium, both subsystems start to contribute simultaneously at the Néel temperature of the iron subsystem.     

Specific heat of YFe3(BO3)4, Y0.5Gd0.5Fe3(BO3)4, and GdFe3(BO3)4

The specific heat was measured in the range 0.4–300 K in YFe₃(BO₃)₄, Y_0.5Gd_0.5Fe₃(BO₃)₄, and GdFe₃(BO₃)₄ single crystals. Sharp anomalies were found at temperatures of first-order structural, second-order antiferromagnetic, and first-order spin-reorientational transitions. A Néel temperature of about 37 K was found to be virtually independent of presence of rare-earth ions, indicating rather weak coupling of Gd and Fe subsystems. The contribution of the magnetic system to specific heat was separated through the scaling procedure allowing determination of the magnetic entropy of Fe and Gd subsystems. At the lowest temperatures, the specific heat in GdFe₃(BO₃)₄ exhibits a Schottky-type anomaly, which is due to Gd³⁺ eightfold degenerate ground-level splitting by the internal magnetic field of the Fe subsystem of about 7 T. The text was submitted by the authors in English.     

Vibrational spectra and elastic,piezoelectric, and magnetoelectric properties of HoFe3(BO3)4 and HoAl3(BO3)4 crystals

Raman spectra of light are obtained for HoFe₃(BO₃)₄ and HoAl₃(BO₃)₄ crystals at various temperatures and are used for determining the frequencies of crystal lattice vibrations at the center of the Brillouin zone. It is also found that the HoFe₃(BO₃)₄ crystal exhibits a phase transition at T _c ≈ 366 K. The magnetoelectric effect in the paramagnetic phase of these compounds is studied experimentally. The lattice vibration frequencies, elastic and piezoelectric moduli, Born dynamic charges, and the high-frequency permittivity are calculated using the density functional method. A peculiar behavior of the transverse acoustic vibration branch is observed in the Γ → Z direction of the Brillouin zone of the HoFe₃(BO₃)₄ crystal. The electric polarization induced by an external field is estimated using the calculated values of piezoelectric moduli and experimental values of magnetostriction.     

Piezoelectric properties of PbHfO3–PbTiO3–Pb(Mg1/3Nb2/3)O3 ternary ceramics

(1 – x)Pb(Hf_1–yTi_y)O₃–x Pb(Mg_1/3Nb_2/3)O₃ (x = 0.1 ～ 0.25, y = 0.555) ternary piezoelectric ceramics were prepared using the two‐step precursor method. Morphotropic phase boundary (MPB) compositions, located at x = 0.18 ～ 0.22, were confirmed using X‐ray diffraction and by their dielectric, piezoelectric and ferroelectric properties. The optimum dielectric and piezoelectric properties were achieved for the MPB composition 0.8Pb(Hf_0.445Ti_0.555)O₃–0.2Pb(Mg_1/3Nb_2/3)O₃, with dielectric permittivity ε_r, piezoelectric coefficient d₃₃, planar electromechanical coupling k_p and Curie temperature T_C being on the order of 2800, 680 pC/N, 70% and 276 °C, respectively. Of particular significance is that the new ternary ceramics exhibit comparable piezoelectric and electromechanical properties to commercial PZT5H ceramics, but with much improved T_C, showing a potential for applications at elevated temperature. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Dielectric, piezoelectric and elastic properties of tetragonal BiScO3-PbTiO3 single crystal with single domain

Modified BiScO₃-PbTiO₃ (BSPT) tetragonal single crystals were grown using high temperature solution method. The dielectric, piezoelectric and elastic properties of single domain BSPT crystals, after poling along [001] crystallographic direction, have been determined experimentally using the resonance method. The results showed that the BSPT tetragonal crystals possess good piezoelectric properties, with electromechanical coupling factor about 88% and piezoelectric coefficient over 400 pC/N at room temperature. BSPT tetragonal crystals have high Curie temperature around 436 °C and high coercive field ∼28 kV/cm, also, the crystal exhibited a very good temperature stability of the properties till 380 °C. For comparison, the material constants of tetragonal Pb(Zn_1/3Nb_2/3)O₃-PbTiO₃ (PZNT) single crystals were measured and listed in this paper.     

Growth of high performance piezoelectric crystal Pb(Zn1/3Nb2/3)O3-PbTiO3 using PbO flux

Novel piezoelectric crystal (1 − x)Pb(Zn_1/3Nb_2/3)O₃-xPbTiO₃ (PZNT) has attracted much attention due to its high piezoelectric properties and potential applications in medical ultrasonic devices, sonar transducers, solid state actuators. However, the applications of PZNT crystals are limited by the lack of a simple and reproducible growth technique. In this work, large size PZNT crystals were grown by the vertical Bridgman method using 50 mol% PbO as a flux. The growth conditions were optimized as mole ratio of raw materials and flux = 1:1, soaking temperature 1150-1200 °C, soaking time 10 h, the lowering rate of the crucible 0.5 mm/h and the temperature gradient near solid-liquid interface about 50 °C/mm. The maximum size of as-grown PZNT crystal was about 60 mm in length. The crystal was oriented and its piezoelectric constant d₃₃ and coupling coefficient k₃₃ were measured over 2000 pC/N and 0.92, respectively.     

Microstructure,dielectric, and piezoelectric properties of 0.38Bi(Gax Sc1–x )O3–0.62PbTiO3 high temperature piezoelectric ceramics

0.38Bi(Ga_x Sc_1–x )O₃–0.62PbTiO₃ (BGSPTx) ceramics have been prepared by using the conventional mixed oxide method. X‐ray diffraction analysis revealed that BGSPTx has a pure perovskite structure, and the crystal symmetry of BGSPTx changed from rhombohedral to tetragonal with increasing Ga content (x). The Curie temperature (T_C) of BGSPTx ceramics is in the range of 448–467 °C for different x. The ferroelectric phase transition of BGSPTx was found to be of the first order type according to the Curie–Weiss law. For x = 0.125, BGSPTx ceramics show enhanced piezoelectric properties: piezoelectric constant d₃₃ = 420 pC/N and d₃₁ = –142 pC/N, planar and thickness electromechanical coupling factors k_p = 56.27% and k_t = 56.00%, respectively. The high‐T_C of BGSPTx coupled with its excellent piezoelectric properties suggests those future high‐temperature applications. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Comparison of laser performance of Yb:YCa4O(BO3)3 crystals cut along the principal optical axes

Efficient high-power continuous-wave laser operation is demonstrated with Yb:YCa₄O(BO₃)₃ crystals cut along the X, Y, and Z principal axes, end pumped by a high-power diode. Highest output powers of 6.3–7.3 W are generated, with slope efficiencies in the range of 73–83%. The standard behavior characterized by fixed linear polarization of the output and decreasing oscillation wavelength when increasing the output coupling was observed only for the X-cut crystal; the Y-cut crystal led to the polarization state changing and coexistence, while the Z-cut crystal resulted in dual-band laser operation with a fixed polarization state. PACS 42.55.Rz; 42.55.Xi     

Magnetization,magnetoelectric polarization,and specific heat of HoGa3(BO3)4

A comprehensive experimental and theoretical study of magnetic, magnetoelectric, thermal, and spectroscopic characteristics of HoGa₃(BO₃)₄ gallium borate single crystals has been performed. A large magnetoelectric effect exceeding its values found in all iron and aluminum borates except HoAl₃(BO₃)₄ has been observed. The magnetoelectric polarization of HoGa₃(BO₃)₄ equals ΔP _ba (B _a ) ≈ ?1020 μC/m² at T = 5 K in a magnetic field of 9 T. The theoretical treatment based on the crystal field model for rare-earth ions provides a unified approach for the consistent interpretation of all measured characteristics. The crystal-field parameters are determined. The temperature (in the 3–300 K range) and magnetic field (up to 9 T) dependences of the magnetization, the Schottky anomaly in the temperature dependence of the specific heat, and its shift in the field B ‖ c are described. To compare the thermal properties of HoGa₃(BO₃)₄ with those of HoAl₃(BO₃)₄ exhibiting record values of the polarization, the specific heat of HoAl₃(BO₃)₄ at various B values and the temperature dependence of the polarization ΔP _b (T) in the applied magnetic field of 9 T have been measured.     

Enhanced piezoelectric properties of sodium bismuth titanate (Na0.5Bi4.5Ti4O15) ceramics with B‐site cobalt modification

The piezoelectric properties of the cobalt‐modified sodium bismuth titanate (Na_0.5Bi_4.5Ti₄O₁₅, NBT) piezoelectric ceramics were investigated. The piezoelectric properties of NBT ceramics were significantly enhanced by cobalt modification. The Curie temperature T_C and piezoelectric constant d₃₃ for the 0.3 wt% cobalt‐modified NBT ceramics (NBT‐C3) were found to be 663 °C and 30 pC/N, respectively. Thermal annealing studies presented that the cobalt‐modified NBT ceramics possess stable piezoelectric properties, demonstrating that the cobalt‐modified NBT‐based ceramics are promising candidates for high temperature piezoelectric applications. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Microstructure,dielectric, and piezoelectric properties of Ce‐modified Na0.5Bi4.5Ti4O15 high temperature piezoceramics

The cerium modified sodium bismuth titanate (Na_0.5Bi_4.5Ti₄O₁₅, NBT) piezoelectric ceramics have been prepared by using the conventional mixed oxide method. X‐ray diffraction analysis revealed that the cerium modified NBT ceramics have a pure four‐layer Aurivillius phase structure. The piezoelectric activity of NBT ceramics was found significantly improved by the modification of cerium. The Curie temperature T_c, and piezoelectric coefficient d₃₃ for the NBT ceramics with 0.50 wt% cerium modification were found to be 655 °C, and 28 pC/N respectively. The Curie temperature gradually decreased from 668 °C to 653 °C with the increase of cerium modification. The dielectric spectroscopy showed that the samples possess stable piezoelectric properties, demonstrating practical potential that for high temperature applications. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Enhanced piezoelectric properties and lowered sintering temperature of Ba(Zr0.07Ti0.93)O3 by B2O3 addition

The effects of B₂O₃ doping on densification, ferroelectric, and piezoelectric properties of Ba(Zr_0.07Ti_0.93)O₃(BZT) ceramics were investigated. The addition of B₂O₃ to the ceramics lowered the sintering temperature by ∼200 °C as well as changed their microstructures. Higher B₂O₃ concentration caused a decrease in remanent polarization and coercive field, while the piezoelectric coefficient d₃₃ remained at a high value of 291 pC/N for the ceramic sample with 2 wt.% B₂O₃. The relationship between piezoelectric properties and ferroelectric constant was examined.     

Spectroscopic investigation of rare-earth chromium borates RCr3(BO3)4 (R = Nd, Sm)

The optical absorption spectra of single crystals of neodymium and samarium chromium borates are studied. A magnetic phase transition in NdCr₃(BO₃)₄ (at T _c = 8 ± 1 K) and SmCr₃(BO₃)₄ (at T _c = 5 ± 1 K) is observed. The effective magnetic field acting on the Nd³⁺ ion from the side of the ordered magnetic subsystem of chromium is estimated.     

Thermo-optic characterization of Yb:YAl3(BO3)4 laser crystal

Principal thermo-optic coefficients, dn _o/dT and dn _e/dT, are determined for 7at.%Yb: YAl₃(BO₃)₄ crystal by the use of a minimum deviation method, modified for anisotropic, optically uniaxial crystals. Direct measurements are accompanied by modeling of the dn/dT versus light wavelength dependence, yielding analytic thermo-optic dispersion formulae for the spectral range of 0.4–1.6 μm. At the wavelength of 1030 nm, dn _o/dT = 3.5 and dn _e/dT = 6.0 [10^?6 K^?1]. Sellmeier formulas are evaluated for the principal refractive indices n _o and n _e. The thermal coefficients of the optical path are determined for the principal crystal cuts of Yb:YAl₃(BO₃)₄, a-cut and c-cut, and light polarizations, π or σ. Finally, thermal lens parameters are evaluated for Yb:YAl₃(BO₃)₄ crystals on the basis of measured material parameters.     

Effects of Li Substitution and Sintering Temperature on Properties of Bi0.5（Na,K）0.5TiO3 Lead-Free Piezoelectric Ceramics

Bi0.5 （Na0.72K0.28- x Lix ）0.5 TiO3 （BNKLT- 100x） lead-free piezoelectric ceramics are synthesized by conventional solid state sintering techniques. The dielectric and piezoelectric properties of the BNKLT-100x ceramics as a function of Li content are systematically investigated. It is found that not only Li content but also the sintering temperature has a strong effect on the piezoelectric properties of BNKLT. The piezoelectric constant d33 Of BNKLT varies from 120 to 252pC/N in the Li content range from 0.03 to 0.16. In the sintering temperature range from 1080 to 1130℃, the d33 value of BNKLT-6 changes from 200pC/N to 252pC/N. The BNKLT-6 sample sintered at 1100℃ has the highest piezoelectric constant d33 of 252pC/N, with the electromechanical coupling factors kp of 0.32 and kt of 0.44.     

Piezoelectric activity and phase transitions in (PMN)0.69(PT)0.31 single crystal

Piezoelectric and dielectric investigations have been performed on a (PMN)_0.69(PT)_0.31 single crystal. Low frequency (100?Hz) dielectric permittivity measurements revealed distinct anomaly at 129°C (T _εmax) corresponding to the structural transformation from the tetragonal to cubic phase. Two other anomalies have been detected at 90 and 96°C. After preliminary polarization in the d.c. electric field, switched on above T _εmax and switched off inside the tetragonal phase, the piezoelectric activity has been observed in function of temperature. Values of the piezoelectric resonance frequencies changed markedly at 96°C (on cooling) and 124°C (on heating) showing clear softening of the elastic properties near these temperatures. Values of the piezoelectric and electromechanical coupling coefficients obtained were respectively of the order of 800?pCN^?1 (d ₃₁) and 0.35?(k ₃₁). Piezoelectric activity was detected tens of degrees above the temperature T _εmax and disappeared at temperature at which the dispersion of the dielectric permittivity due to the presence of polar nanoregions is negligible. It was found that strong softening of the elastic properties accompanies phase transitions to the tetragonal and monoclinic phase.     

Structural and crystallization behavior of (Ba,Sr)TiO3 borosilicate glasses

Various glass samples were prepared by melt quench technique in the glass system [(Ba_{1? x} Sr _x ) TiO₃]–[2SiO₂–B₂O₃]–[K₂O] doped with 1?mole% of La₂O₃. Infrared spectra show the number of absorption peaks with different spliting in the wave number range from 450 to 4000?cm^?1. Absorption peaks occurs due to asymetric vibrational streching of borate by relaxation of the bond B–O of trigonal BO₃. Raman spectra show the Raman bands due to ring-type metaborate anions, symmetric breathing vibrations BO₃ triangles replaced by BO₄ tetrahedra, and symmetric breathing vibrations of six-member rings. The differential thermal analysis of a glass sample corresponding to composition x?=?0.0 shows crystallization temperature at 847°C and glass transition temperature at 688°C. X-ray diffraction (XRD) pattern of glass ceramic samples shows the major crystalline phase of BaTiO₃ whereas pyrochlore phases of barium titanium silicate. Scanning electron micrographs confirm the results of XRD as barium titanate is major crystalline phase along with pyrochlore phase of barium titanium silicate.