Multifunctional PES fabrics modified with colloidal Ag and TiO2 nanoparticles

This study is aimed to highlight the possibility of engineering the multifunctional textile nanocomposite material based on the polyester (PES) fabric modified with colloidal Ag and TiO₂ nanoparticles (NPs). The effects of concentration of NPs as well as the order of Ag and TiO₂ NPs loading on antimicrobial, UV protective, and photocatalytic properties of PES fabrics were examined. The antimicrobial activity of differently modified PES fabrics was tested against Gram‐negative bacterium Escherichia coli, Gram‐positive bacterium Staphylococcus aureus, and fungus Candida albicans. The concentration of Ag colloid and the order of Ag and TiO₂ NPs loading considerably affected the antimicrobial efficiency of PES fabrics. The fabrics provided maximum UV protection upon surface modification with Ag and TiO₂ NPs. Ag NPs enhanced Ag NPs enhanced the photodegradation activity of TiO₂ NPs and total photodegradation of methylene blue was achieved after 24 hr of UV illumination. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of highly dispersed,block copolymer‐grafted TiO2 nanoparticles within neat block copolymer films

The objective of the study is to formulate exclusive block copolymer (BCP) nanocomposites by dispersing bcp end‐grafted nanoparticles (bcp‐g‐nps) of PMMA‐b‐PS‐g‐TiO₂ within PS‐b‐PMMA matrix. PMMA‐b‐PS‐g‐TiO₂ is synthesized using a “grafting‐to” approach and characterized by XPS and TGA to establish that the copolymer chains were bonded to NPs. Good dispersion of bcp‐g‐nps in PMMA and PS‐PMMA bcp films is observed, in contrast to poor dispersion in PS films. In PS‐PMMA films, the compatible and identical bcp nature of the end‐grafted polymer, and large NP size caused it to span across entire PS‐PMMA domains. Poor and good dispersion in PS and PMMA matrices, respectively, can be rationalized by the fact that NPs interactions are driven by the PMMA at the outer corona of the bcp‐g‐nps. Developing bcp‐g‐nps as a strategic route to preparation of highly dispersed high permittivity NPs like titanium dioxide (TiO₂) in bcp matrix can have important ramifications for energy storage devices. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 468–478     

Effect of urea surface modification and photocatalytic cleaning on surface‐assisted laser desorption ionization mass spectrometry with amorphous TiO2 nanoparticles

We have investigated the effect of urea surface modification and the photocatalytic cleaning on surface‐assisted laser desorption ionization mass spectrometry (SALDI‐MS) with amorphous TiO₂ nanoparticles for the reduction of the background noise and the improvement of the sensitivity. In the use of nanoparticles of high surface area, chemical background signals arising from ambient environments and organic contaminants can frequently be serious problems below 500 Da, possibly reducing the advantages of the matrix‐free approach. In this study, removal of contaminants and enhanced SALDI efficiency were easily achieved with UV irradiation via the photocatalyst effect of TiO₂ before SALDI‐MS measurements. The surface cleaning achieved by the UV photocatalytic procedure reduced the background noise and increased the peak intensities of peptides. In addition, we found that urea surface modification of TiO₂ nanoparticles increased the performance of the TiO₂‐SALDI‐MS. (1) The urea‐surface modification of TiO₂ made it possible to produce proton‐adduct forms without citrate buffer, resulting in low background noises below 500 Da, in contrast to the essential use of a citrate buffer in the bare TiO₂‐SALDI‐MS. (2) The detection sensitivity of angiotensin I increased to 0.3 fmol with the urea‐surface modification, as compared to the use of bare TiO₂ nanoparticles (6 fmol). The urea‐TiO₂ could ionize proteins of more than 20 000 Da such as trypsinogen (600 fmol). (3) The urea modification of TiO₂ had the advantage of selective detection of phosphopeptides without sample clean up, or prefractionation in tryptic digest products of bovine hemoglobin. Copyright © 2009 John Wiley & Sons, Ltd.     

银纳米颗粒负载TiO2复合薄膜的光催化活性及其光电流性质

制备了3种不同粒径的Ag纳米颗粒,将它们分别掺入二氧化钛溶胶, 制备成复合二氧化钛薄膜。利用TEM测定了Ag粒子的大小,测量TiO₂复合膜的光电流,以亚甲基蓝降解反应评价了Ag/TiO₂薄膜的光催化活性.结果表明,负载不同粒径Ag纳米粒子后,TiO₂薄膜的光电流和光催化活性均得到一定程度的提高.当负载平均粒径6.9 nm的Ag粒子后,薄膜具有最高的光电流和最强的光催化活性.     

Photosensitization of TiO2 nanoparticulate thin film electrodes by CdS nanoparticles

Surface photovoltage spectra (SPS) measurements of TiO₂ show that a large surface state density is present on the TiO₂ nanoparticles and these surface states can be efficiently decreased by sensitization using CdS nanoparticles as well as by suitable heat treatment. The photoelectrochemical behavior of the bare TiO₂ thin film indicates that the mechanism of photoelectron transport is controlled by the trapping/detrapping properties of surface states within the thin films. The slow photocurrent response upon the illumination can be explained by the trap saturation effect. For a TiO₂ nanoparticulate thin film sensitized using CdS nanoparticles, the slow photocurrent response disappears and the steady-state photocurrent increases drastically, which suggests that photosensitization can decrease the effect of surface states on photocurrent response. Electronic Publication     

Synthesis and characterization of ternary nanocomposites of TiO2/rGO/CdS as an efficient catalyst for photo-degradation of methyl orange

Novel ternary composite photocatalysts have been successfully prepared by TiO₂ nanofibers, reduced graphene oxide, and CdS nanoparticles (TiO₂/rGO/CdS) by using electrospinning technique with easy chemical methods. The structures and their properties are examined by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and field-emission scanning electron microscope (FESEM). The structural characterization of the composite reveals that pure TiO₂ NFs and CdS NPs crystalline very well and the reduced graphene oxide is tightly composed with TiO₂ NFs and CdS Nps. The photodegradation of methyl orange (MO) under UV light illumination is significantly enhanced compared with that of bare materials. This ternary composite degrades methyl orange within 75 min. The enhanced photocatalytic degradation performance resulted from effective separation of e–h pairs with rGO sheets and also contributed for high rate degradation efficiency. This novel ternary composite has a potential application of wastewater purification and utilization for energy conversions.     

Preparation and characterization of natural zeolite supported nano TiO2 photocatalysts by a modified electrostatic self‐assembly method

Natural zeolite supported nano TiO₂ photocatalysts were prepared by a modified electrostatic self‐assembly (ESA) method. First, γ‐mercaptopropyltrimethoxysilane with sulfhydryl (―SH) functional groups was modified on the zeolite powders by using a ‘dry process’. Second, silane with ―SH functional groups was oxidized to sulfonate (―SO₃H) groups by using a hydrogen peroxide/glacial acetic acid mixed solution, and the surface of ―SO₃H silane–zeolite was electronegative charged due to the ionization of ―SO₃H. Third, the hydrolytic titanium polycation from TiCl₄ solution assembled onto the electronegative charged zeolite under electrostatic attraction in the reaction solutions. Finally, zeolite supported nano TiO₂ photocatalysts can be obtained after the above compounds calcined at certain temperature. The samples were characterized by X‐ray diffraction (XRD), Brunauer–Emmett–Teller (BET) surface areas, Fourier transform infrared spectroscopy (FT‐IR), X‐ray photoelectron spectroscopy (XPS) and X‐ray fluorescence (XRF). The photocatalytic activities of the samples were evaluated by the degradation of methyl orange in aqueous solution. The results showed that ESA method effectively improved the composite efficiency of zeolite with TiO₂. The photocatalysts prepared by ESA method exhibited higher photocatalytic and recycling activities than that of traditional method. Copyright © 2014 John Wiley & Sons, Ltd.     

Preparation of composited Nano‐TiO2 and its application on antimicrobial and self‐cleaning coatings

Composite nano‐TiO₂ with doping Fe³⁺ and Ag was prepared, and further modified by 3‐methacryloxypropyltrimethoxysilane. They were characterized by Zetasizer Nano ZS Particle and Zeta Potential Analyzer, X‐ray diffraction, UV–Vis spectrophotometer, FT–IR spectra, and transmission electron microscopy. The modified composite nano‐TiO₂ was applied to prepare multifunctional fluorocarbon coatings (FCC). Antibacterial activity of multifunctional FCC containing modified composite nano‐TiO₂ was investigated. Its photocatalytic antibacterial activity reached 92%. The influence of doping ingredients, amount of composite nano‐TiO₂, different light houses, or surface modification was discussed. The surface of FCC cannot be easily smirched by oiliness, dust or water because of hydrophobic fluorosilicone emulsion. It would be an available modern interior building coating for its remarkable photocatalytic antibacterial property as well as self‐cleaning function. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of TiO2 nanoparticles on structure and properties of high density polyethylene membranes prepared by thermally induced phase separation method

Polyethylene/TiO₂ membranes were fabricated via thermally induced phase separation (TIPS) method. A set of characterization tests including FE‐SEM, EDX, XRD, DSC, TGA, DMA, mechanical test and relative pure water flux for characterization of membranes were carried out to investigate the effect of TiO₂ nanoparticles on membrane properties. The results of EDX, XRD and TGA analyses confirmed the presence of TiO₂ nanoparticles in the polymer matrix. The results of DSC analysis revealed that the melting point as well as the crystallinity of the membranes increased slightly with increasing TiO₂ content. However, the glass transition temperature of the membranes was not affected by the presence of particles. Addition of nanoparticles also increased storage modulus, loss modulus and tensile strength at break of the membranes due to the stiffness improvement effect of inorganic TiO₂. Finally, it was observed that incorporation of the nanoparticles improved pure water flux of the membranes. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel antimicrobial polyethylene composites prepared by metallocenic in situ polymerization with TiO2‐based nanoparticles

Polyethylene (PE) composites with titanium oxide (TiO₂) nanoparticles were produced via in situ polymerization representing a novel route to obtain antimicrobial polymeric materials. The TiO₂ nanoparticles synthesized by the sol–gel method were used either as‐synthesized or modified organically with hexadecyltrimethoxysilane (Mod‐TiO₂). These particles were added, together with the catalytic system (formed by a metallocenic catalyst and methylaluminoxane as cocatalyst), directly to the reactor, yielding in situ PE composites with 2 and 8 wt % content of nanofiller. The catalytic polymerization activity presented a slight decrease with the incorporation of the TiO₂ and Mod‐TiO₂ nanoparticles compared to polymerization without filler. Regarding the properties of the composites, crystallinity increased slightly when the different nanofillers were added, and the elastic modulus increased around 15% compared to neat PE. PE/TiO₂ nanocomposites containing 8 wt % of TiO₂ exposed to UVA irradiations presented antimicrobial activity against Escherichia coli. The PE/Mod‐TiO₂ nanocomposite with 8 wt % filler killed 99.99% of E. coli, regardless of light and time irradiation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Catalysis by Using TiO2 Nanoparticles and Nanotubes

TiO2 has attracted considerable attention due to its stability, non-toxicity, low cost, and great potential for use as a photocatalyst in environmental applications. Since strong metal-support interaction (SMSI) of titania-supported noble metals was first reported in 1978, titania supported catalyst has been intensively studied in heterogeneous catalysis. However, the effective catalytic activity was restricted due to the low surface area of TiO2. Recently, TiO2-based nanotubes were extensively investigated because of their potentials in many areas such as highly efficient photocatalysis and hydrogen sensor.In the present study, formation of titanium oxide (TiO2) nanotubes was carried out by hydrothermal method, with TiO2 nanoparticle-powders immersed in concentrated NaOH solution in an autoclave at 110 ℃. Preparation of nano-size Pt on TiO2-nanoparticles or TiO2-nanotubes was performed by photochemical deposition method with UV irradiation on an aqueous solution containing TiO2 and hexachloroplatinic acid or tetrachloroauric acid. The TEM micrographs show that TiO2-nanotubes exhibit ～300 nm in length with an inner diameter of ～ 6 nm and the wall thickness of ～ 2 nm, and homogeneous nanosize Pt particles (～ 2 nm) were well-dispersed on both nanoparticle- and nanotube- titania supports. It also shows the nanotube morphology was retained up2o n Pt-immobilization. Nitrogen adsorption isotherm at 77K resulted a high surface area (～ 200m/g) of TiO2-nanotubes, which is about 40 times greater than that of "mother" TiO2 nanoparticles (～5 m/g). All the spectroscopic results exhibited that the nanotube structure was not significantly affected by the immobilized Pt particles. Ti K-edge XANES spectra of TiO2 nanotube and Pt/TiO2-nanotube represent that most titanium are in a tetrahedral coordination with few retained in the octahedral structure.In the in-situ FT-IR experiments, an IR cell was evacuated to a pressure of 10-5 torr at room temperature as soon as the catalyst-pellet, Pt/TiO2 or Pt/TiO2-nanotube, was placed inside the cell.Then, 60 torr of hydrogen was introduced into the cell and subsequently the temperature was programmed to increase from room temperature to 300℃ at a constant heating rate of 5℃/min.For Pt/TiO2, an IR peak at 2083 em-1 started to appear at 200℃ with a maximum intensity at 250℃ and then decreasing as temperature increased. The 2083 em-1 IR peak corresponds to the linearly adsorption of CO on the well-dispersed Pt sites. Simultaneously, the IR bands of gaseous methane at 3016 em-1 started to appear at 225℃ and the peak intensity increased with temperature. The results reveal that Pt/TiO2 can adsorb gaseous CO2 and further catalyzes the reduction of CO2 by H2 through the intermediate CO, which further produces gaseous methane. While for the Pt/TiO2-nanotube catalyst, methane was produced at relatively low temperature, 100℃, and it catalyzed the direct conversion of CO2 to CH4. The absence of intermediate CO-adsorption signals durinng the temperature programmed process indicates that the prepared TiO2 nanotube-supported nanosize Pt possesses a potent capability for CO2 adsorption and highly catalytic activity in the hydrogenation of CO2, and was superior to the conventional Pt/TiO2 catalyst. The catalytic activity of Pt/TiO2-nanotube was indeed significantly enhanced by the high surface area of TiO2-nanotubes.Details will be discussed.     

Intrinsic catalytic structure of gold nanoparticles supported on TiO2

Despite the fragility of TiO(2) under electron irradiation, the intrinsic structure of Au/TiO(2) catalysts can be observed by environmental transmission electron microscopy. Under reaction conditions (CO/air 100?Pa), the major {111} and {100} facets of the gold nanoparticles are exposed and the particles display a polygonal interface with the TiO(2) support bounded by sharp edges parallel to the 〈110〉 directions.     

Silane grafting of TiO2 nanoparticles: dispersibility and photoactivity in aqueous solutions

Titania nano‐sized particles were treated by various amounts of tetraethyl orthosilicate precursor. The extent of grafting was characterized using Fourier transform infrared (FTIR) and ultraviolet‐visible (UV‐Vis) spectroscopy techniques, thermal gravimetric analysis, X‐ray fluorescence and zeta potential measurements. Sedimentation behaviour of titanium dioxide (TiO₂) nanoparticles in aqueous solutions was evaluated visually and using a separation analyser. Photocatalytic activity of nanoparticles was studied by photo‐activated degradation reaction of Rhodamine B dyestuff in aqueous solutions. The results showed that grafted particles had acquired enhanced dispersion stability and lower photocatalytic activity in aqueous solutions. Untreated TiO₂ dispersions settled rapidly and sedimentation completed within 24 h through the coagulation mechanism, whereas that of the silica‐treated nanoparticles, depending on the silica content, showed different degrees of stability by flocculation mechanism. Photodebleaching of Rhodamine B in the presence of treated nanoparticles is evident by weaker intensity of UV absorption peak of 554 nm due to lowering concentration of Rhodamine B accompanied with the blue shift in UV absorption peaks. However, untreated TiO₂ nanoparticles showed only weaker intensity of UV absorption peak. Copyright © 2011 John Wiley & Sons, Ltd.     

Photocatalytic activity of ZrO2 nanoparticles prepared by electrical arc discharge method in water

ZrO₂ nanoparticles were synthesized through arc discharge of zirconium electrodes in deionized (DI) water. X-ray diffraction (XRD) analysis of the as prepared nanoparticles indicates formation a mixture of nanocrystalline ZrO₂ monoclinic and tetragonal phase structures. Transmission electron microscopy (TEM) images illustrate spherical ZrO₂ nanoparticles with 7–30 nm diameter range, which were formed during the discharge process with 10 A arc current. The average particle size was found to increase with the increasing arc current. X-ray photoelectron spectroscopy (XPS) analysis confirms formation of ZrO₂ at the surface of the nanoparticles. Surface area of the sample prepared at 10 A arc current, measured by BET analysis, was 44 m²/g. Photodegradation of Rhodamine B (Rh. B) shows that the prepared samples at lower currents have a higher photocatalytic activity due to larger surface area and smaller particle size.     

基于纳米TiO2的化学发光法检测核黄素

纳米TiO2与NaOH溶液作用能产生化学发光辐射,在表面活性剂十六烷基三甲基溴化铵(CTAB)的存在下,核黄素的加入能增强纳米TiO2-NaOH溶液的化学发光强度。基于此,构建了纳米TiO2-NaOH溶液化学发光新体系,建立了纳米TiO2-NaOH-核黄素体系检测核黄素的化学发光新方法。在优化实验条件下,核黄素质量浓度在5.0×10-6～3.5×10-4g/mL范围内与化学发光强度呈良好的线性关系,检出限为3.0×10-6g/mL,对2.5×10-5g/mL的核黄素进行11次平行测定,相对标准偏差为2.9%。该方法用于维生素B2片剂的测定,其结果与药典方法测得一致。该文同时对化学发光反应的机理进行了初步探讨。     

Effects of UV irradiation on tribological properties of nano‐TiO2 thin films

One‐layer and two‐layer nano‐TiO₂ thin films were prepared on the surface of common glass by sol–gel processing. Water contact angle, surface morphology, tribological properties of the films before and after ultraviolet (UV) irradiation were investigated using DSA100 drop shape analyzer, scanning probe microscopy (SPM), SEM and universal micro‐materials tester (second generation) (UMT‐2MT) friction and wear tester, respectively. The stored films markedly resumed their hydrophilicity after UV irradiation. But UV irradiation worsened tribological properties of the films. After the film was irradiated by UV, the friction coefficient between the film and GCr15 steel ball increased about 10–50% and its wear life shortened about 20–90%. Abrasive wear, brittle break and adherence wear are the failure mechanisms of nano‐TiO₂ thin films. It was believed that UV irradiation increased surface energy of the film and then aggravated adherence wear of the film at initial stage of friction process leading to severe brittle fracture and abrasive wear. Copyright © 2009 John Wiley & Sons, Ltd.     

Thermo-responsive and antifouling PVDF nanocomposited membranes based on PNIPAAm modified TiO2 nanoparticles

A novel hydrophilic nanocomposite additive(TiO2-g-PNIPAAm) was synthesized by the surface modification of titanium dioxide(TiO2) with N-isopropylacrylamide(NIPAAm) via "graft-from" technique. And the nanocomposite membrane of poly(vinylidene fluoride)(PVDF)/TiO2-g-PNIPAAm was fabricated by wet phase inversion. The graft degree was obtained by thermo-gravimetric analysis(TGA). Fourier transform infrared attenuated reflection spectroscopy(FTIR-ATR) and X-ray photoelectronic spectroscopy(XPS) characterization results suggested that TiO2-g-PNIPAAm nanoparticles segregated on membrane surface during the phase separation process. Scanning electron microscopy(SEM) was conducted to investigate the surface and cross-section of the modified membranes. The water contact angle measurements confirmed that TiO2-g-PNIPAAm nanoparticles endowed PVDF membranes better hydrophlilicity and thermo-responsive properties compared with those of the pristine PVDF membrane. The water contact angle decreased from 92.8° of the PVDF membrane to 61.2° of the nanocompostie membrane. Bovine serum albumin(BSA) static and dynamic adsorption experiments suggested that excellent antifouling properties of membranes was acquired after adding TiO2-gPNIPAAm. The maximum BSA adsorption at 40 °C was about 3 times than that at 23 °C. The permeation experiments indicated the water flux recover ratio and BSA rejection ratio were improved at different temperatures.     

Palladium nanoparticles‐decorated triethanolammonium chloride ionic liquid‐modified TiO2 nanoparticles (TiO2/IL‐Pd): A highly active and recoverable catalyst for Suzuki–Miyaura cross‐coupling reaction in aqueous medium

In this work, an easily obtained procedure was successfully implemented to prepare novel palladium nanoparticles decorated on triethanolammonium chloride ionic liquid‐functionalized TiO₂ nanoparticles [TiO₂/IL‐Pd]. Different methods were carried out for characterizations of the synthesized nanocatalyst (HR‐TEM, XPS, XRD, FE‐SEM, EDX, FT‐IR and ICP). TiO₂/IL‐Pd indicated good catalytic activity for the Suzuki–Miyaura cross‐coupling reaction of arylboronic acid with different aryl halides in aqueous media at ambient temperature. The recycled catalyst was investigated with ICP to amount of Pd leaching after 6 times that had diminished slightly, Thus, was confirmed that the nanocatalyst has a good sustainability for C–C Suzuki–Miyaura coupling reaction. The catalyst can be conveniently separated by filtration of the reaction mixture and reused for 6 times without significant loss of its activity. It supplies an environmentally benign alternative path to the existing protocols for the Suzuki–Miyaura reaction.     

Photocatalytic Reduction of Nitro Compounds Using TiO2 Photocatalyst by UV and Vis Dye-sensitized Systems

Nitro‐aromatic compounds can be photocatalytically reduced into the corresponding amine‐aromatic compounds using TiO₂ as a photocatalyst in the UV/TiO₂/holes scavenger and Vis/TiO₂/dye‐sensitized systems. In the UV/TiO₂/holes scavenger system, reaction substrate alcohols such as methanol could be used as the holes scavengers, and in the Vis/TiO₂/dye‐sensitized system, substrate alcohols could be oxidized to the corresponding aldehydes with high selectivity. When methanol was used as the holes scavengers and the illumination time was 6 h, 87.2% of p‐nitrotoluene could be photocatalytically reduced into p‐toluidine. In the Vis/TiO₂/dye‐sensitized system, the effect of aromatic alcohols for the photocatalytic reduction of nitrobenzene was better than that of other alcohols. At the same time, aromatic alcohols can be easily oxidized, and the production efficiencies of the corresponding aldehydes were higher than those of other alcohols. The possible reaction mechanisms were also proposed.