Effects of organic acids on the size-controlled synthesis of rutile TiO2 nanorods

Size-controlled synthesis of pure rutile-phase TiO₂ nanorods was carried out by a hydrothermal method using different organic acids as modifiers, and metatitanic acid and concentrated sulfuric acid as raw materials. The synthesized rutile TiO₂ nanorods were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The effects of organic acid modifiers on the sizes of rutile TiO₂ nanorods were investigated. It was found that the steric effect occurred by the organic modifiers and non-polarity of organic acids were beneficial to the formation of small-sized rutile TiO₂ nanorods. The strongly coordinative interaction between the carboxyl (or hydroxyl) group of the modifier and the surface of TiO₂ nanoparticles effectively inhibited the crystal growth.     

Chemical and microstructural study of the oxygen passivation behaviour of nanocrystalline Mg and MgH2

Nanocrystalline Mg and MgH₂ samples have been prepared by high-energy ball milling and gas phase condensation methods. Starting from these materials in their “as received” state without air exposure, a study of the oxygen and air passivation behaviour was carried out by “in situ” analysis of the samples by X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The binding energy and photoemission Auger parameters have been determined for metallic magnesium as well as for magnesium hydride, oxide and hydroxide species. Values of the MgH₂ material were reported for the first time. The study clearly shows the formation of an oxide passivation layer of ca. 3-4 nm in thickness for all the nanocrystalline magnesium samples handled under controlled inert gas atmospheres. A hydroxide like amorphous layer is formed at the topmost surface layers of the nanocrystalline Mg and MgH₂ samples. The implication of these studies for H₂ storage and transport applications of nanocrystalline magnesium is discussed.     

Effect of surface fluorination on the photocatalytic and photo-induced hydrophilic properties of porous TiO2 films

Porous surface-fluorinated TiO₂ (F-TiO₂) films were prepared through PEG modified sol-gel method and surface fluorination. The as-prepared films were characterized with XRD, FTIR, AFM, XPS and UV-vis DRS. The effects of surface fluorination on the photocatalytic activity and hydrophilicity of porous TiO₂ film were studied by photocatalytic degradation of rhodamine B (RhB) as well as water contact angle (CA) on porous TiO₂ film. The results showed that the surface fluorination increased the adsorption of RhB on the porous TiO₂ film and enhanced the photocatalytic degradation of RhB. The concentration and pH of NaF solutions affected much the photocatalytic activity of porous TiO₂ film. Porous F-TiO₂ film prepared in 40 mM NaF solution at pH 4.0 showed the highest photocatalytic activity. Because of its porous structure, the porous F-TiO₂ film had original water CA of 22.7°, which is much smaller than that of normal F-TiO₂ film. Under UV light irradiation, the water CA of porous F-TiO₂ film decreased to 5.1° in 90 min.     

Growth of single-walled carbon nanotubes on silicon nanowires

Single-walled carbon nanotubes (SWNTs) have been grown on silicon nanowires (SiNWs) by ethanol chemical vapor deposition (CVD) with Co catalysts. We have found that a surface SiO_x layer of SiNWs is necessary for the formation of active Co catalysts. In fact, the yield of the SWNT/SiNW heterojunctions gradually decreases as the thickness of the surface SiO_x layer decreases. Since thin SiNWs are transparent to an electron beam, the Co nanoparticles on SiNWs can be easily observed as well as SWNTs by TEM. Therefore, the relationship between the diameters of each SWNT and its catalyst nanoparticle has been investigated. The diameters of SWNTs are equal to or slightly smaller than those of the catalyst nanoparticles.     

Growth and characterization of nanostructured anatase phase TiO<Subscript>2</Subscript> thin films prepared by DC reactive unbalanced magnetron sputtering

Titanium dioxide thin films were deposited on three different unheated substrates by unbalanced magnetron sputtering. The effects of the sputtering current and deposition time on the crystallization of TiO₂ thin films were studied. The TiO₂ thin films were deposited at three sputtering current values of 0.50, 0.75, and 1.00 A with different deposition times of 25, 35, and 45 min, respectively. The surface morphology of the films was investigated by atomic force microscopy (AFM). The structure was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The film thickness was determined by field emission scanning electron microscopy (FE-SEM), and the optical property was evaluated with spectroscopic ellipsometry. The results show that polycrystalline anatase films were obtained at a low sputtering current value. The crystallinity of the anatase phase increases as the sputtering current increases. Furthermore, nanostructured anatase phase TiO₂ thin films were obtained for all deposition conditions. The grain size of TiO₂ thin films was in the range 10–30 nm. In addition, the grain size increases as the sputtering current and deposition time increase.     

Hydrothermal growth of large-scale macroporous TiO<Subscript>2</Subscript> nanowires and its application in 3D dye-sensitized solar cells

Large-scale macroporous TiO₂ nanowires (MTN) were directly grown on spiral-shaped titanium wires as photoanodes of dye-sensitized solar cells (DSSCs) via a facile hydrothermal reaction without any seeds, templates, and TiO₂ powder. The MTN thin film was characterized by SEM, XRD and TEM. The studies revealed that the MTN thin film had better mechanical properties and provided an efficient pathway for the diffusion of liquid electrolyte. The efficiency of 0.86% for the 3D DSSC was obtained with a J _sc of 2.30 mA/cm², V _oc of 616 mV, and FF of 0.61. This MNT-based mini 3D DSSC is a promising photovoltaic device for applications in the fields of high-integrated micro-electronic equipment.     

Effect of alkali leaching on the surface structure of Ni3Al catalyst

The surface structure of the alkali-leached single-phase Ni₃Al powder was investigated by X-ray diffraction, BET (Brunauer-Emmett-Teller) surface area analysis, electron microscopy, X-ray photoelectron spectroscopy, and temperature-programmed reduction. It was found that fine Ni particles of several nm in diameter were formed on the outer surface layer of the Ni₃Al powder after the alkali leaching process. The surface of the Ni particles was covered with a thin layer of Ni oxides and hydroxide, Ni₂O₃, NiO and Ni(OH)₂, and these Ni oxides and hydroxide can be easily reduced by hydrogen to the metallic nickel that is catalytically active. The inside of the Ni₃Al powder remained as the original Ni₃Al ordered structure after alkali leaching. Having heat resistant properties, the Ni₃Al phase can serve as a support of the fine Ni particles and provide the structural and thermal stabilities to the fine Ni particles.     

Molecular imprinting and adsorption of metallothionein on nanocrystalline titania membranes

Metallothionein (MT) imprinted TiO₂ membrane was synthesized via surface sol-gel process, using MT as template and TiO₂ sol as imprinted matrix. Appropriate template cavities in the TiO₂ sol-gel membrane were formed after the template molecules were removed on treatment with 1% NaOH solution. In situ technique of quartz crystal microbalance (QCM) was employed to study the molecular imprinting behavior of MT on nanocrystalline titania membranes. The imprinted membrane showed selectivity recognition for MT as compared to the other proteins. The amount of adsorption increased with the increasing of MT concentration both on imprinted membrane and non-imprinted membrane. The adsorption amount increased with the increasing of pH on imprinted membrane.     

Effect of two-step functionalization of Ti by chemical processes on protein adsorption

Titanium and its alloys are widely used for orthopedic and dental implants because of their superior mechanical properties, low modulus, excellent corrosion resistance and good biocompatibility. However, it takes several months for titanium implants and bone tissue to reach integration. Hence, there is growing interest in shortening the process of osseointegration and thereby reducing surgical restrictions. Various surface modifications have been applied to form a bioactive titanium oxide layer on the metal surface, which is known to accelerate osseointegration.The present work shows that titanium dioxide (TiO₂) layers formed on titanium substrates by etching in a solution of sodium hydroxide (NaOH) or hydrogen peroxide/phosphoric acid (H₃PO₄/H₂O₂, with a volume ratio of 1:1) are highly suitable pre-treatments for apatite-like coating deposition. Using a two-step procedure (etching in an alkaline or acidic solution followed by soaking in Hanks’ medium), biomimetic calcium phosphate coatings were deposited on porous TiO₂ layers. The combined effects of surface topography and chemistry on the formation of the calcium phosphate layer are presented. The topography of the TiO₂ layers was characterized using HR-SEM and AFM techniques. The nucleation and growth of calcium phosphate (Ca-P) coatings deposited on TiO₂ porous layers from Hanks’ solution was investigated using HR-SEM microscopy. AES, XPS and FTIR surface analytical techniques were used to characterize the titanium dioxide layers before and after deposition of the calcium phosphate coatings, as well as after the process of protein adsorption. To evaluate the potential use of such materials for biomedical applications, the adsorption of serum albumin, the most abundant protein in the blood, was studied on such surfaces.     

Low temperature deposition of TiO2 thin films on polyvinyl alcohol fibers with photocatalytical and antibacterial activities

Fine particles of photoactive anatase-type TiO₂ coated polyvinyl alcohol (PVA) fibers (TiO₂/PVA) were prepared successfully via a simple dip-coating method. Tetrabutyl orthotitanate (TBOT) was hydrolyzed in presence of hydrolysis control agent tetrabutylammonium hydroxide (TBA)OH and the TiO₂ fine particles were crystallized under microwave (MW) irradiation. The X-ray diffraction (XRD) and selected-area electron diffraction (SAED) analyses indicated that the fine particles obtained with MW irradiation have much higher crystallinity with a single phase anatase compared with the non-MW-treated solution. The continuous layers of titania were found on PVA fibers by the scanning electron microscopy (SEM) analysis. The fibers with anatase coatings showed high photocatalytic property on the photodegradation of methylene blue (MB) and high antibacterial activity.     

Analyses of surface coloration on TiO2 film irradiated with excimer laser

TiO₂ film of around 850 nm in thickness was deposited on a soda-lime glass by PVD sputtering and irradiated using one pulse of krypton-fluorine (KrF) excimer laser (wavelength of 248 nm and pulse duration of 25 ns) with varying fluence. The color of the irradiated area became darker with increasing laser fluence. Irradiated surfaces were characterized using optical microscopy, scanning electron microscopy, Raman spectroscopy and atomic force microscopy. Surface undergoes thermal annealing at low laser fluence of 400 and 590 mJ/cm². Microcracks at medium laser fluence of 1000 mJ/cm² are attributed to surface melting and solidification. Hydrodynamic ablation is proposed to explain the formation of micropores and networks at higher laser fluence of 1100 and 1200 mJ/cm². The darkening effect is explained in terms of trapping of light in the surface defects formed rather than anatase to rutile phase transformation as reported by others. Controlled darkening of TiO₂ film might be used for adjustable filters.     

Structure and properties of TiO<Subscript>2</Subscript> surfaces: a brief review

Titanium oxides are used in a wide variety of technological applications where surface properties play a role. TiO₂ surfaces, especially the (110) face of rutile, have become prototypical model systems in the surface science of metal oxides. Reduced TiO₂ single crystals are easy to work with experimentally, and their surfaces have been characterized with virtually all surface-science techniques. Recently, TiO₂ has also been used to refine computational ab initio approaches and to calculate properties of adsorption systems. Scanning tunneling microscopy (STM) studies have shown that the surface structure of TiO₂(110) is more complex than originally anticipated. The reduction state of the sample, i.e. the number and type of bulk defects, as well as the surface treatment (annealing in vacuum vs. annealing in oxygen), can give rise to different structures, such as two different (1×2) reconstructions, a ‘rosette’ overlayer, and crystallographic shear planes. Single point defects can be identified with STM and influence the surface chemistry in a variety of ways; the adsorption of water is discussed as one example. The growth of a large number of different metal overlayers has been studied on TiO₂(110). Some of these studies have been instrumental in furthering the understanding of the ‘strong metal support interaction’ between group-VIII metals and TiO₂, as well as low-temperature oxidation reactions on TiO₂-supported nanoscopic gold clusters. The growth morphology, interfacial oxidation/reduction reaction, thermal stability, and geometric structure of ultra-thin metal overlayers follow general trends where the most critical parameter is the reactivity of the overlayer metal towards oxygen. It has been shown recently that the technologically more relevant TiO₂ anatase phase can also be made accessible to surface investigations. Received: 4 March 2002 / Accepted: 20 October 2002 / Published online: 5 February 2003 RID="*" ID="*"Corresponding author. Fax: +1-504/862-8279, E-mail: diebold@tulane.edu     

Surface characterization of TiO2 thin films obtained by high-energy reactive magnetron sputtering

This paper presents the results of surface characterization of TiO₂ thin films deposited on different substrates by the use of high-energy reactive magnetron sputtering. Structural investigations carried out by X-ray diffraction (XRD) and atomic force microscopy (AFM) have shown a strong influence of both the substrate type, and its placement in the deposition chamber (relative to the sputtering target), on the structural properties of the films. In all cases, there is evidence for pseudoepitaxial growth. XRD examination showed existence of TiO₂-rutile phase with preferred (1 1 0) orientation and AFM measurements revealed nanocrystalline structure directly after deposition. X-ray photoelectron spectroscopy analysis showed that the TiO₂ films have stoichiometric composition.     

Low-temperature preparation of F-doped TiO2 film and its photocatalytic activity under solar light

A novel and simple method for preparing F-doped anatase TiO₂ (defined as FTO) film with high photocatalytic activity was developed using titanium-n-butoxide and NH₄F as TiO₂ and fluorine precursors under mild condition, i.e. low temperature (lower than 373 K) and ambient pressure. The prepared samples were characterized by XRD, SEM, X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectrum (DRS), photoluminescence spectrum (PL) and TG-DSC analysis. The photocatalytic activity was evaluated by decomposing X-3B under artificial solar light. The results showed that the crystallinity of TiO₂ was improved by F-doping. F⁻ ions can prevent the grain growth, and the transformation of anatase to rutile phase was also inhibited. The doped fluorine atoms existed in two chemical forms, and the ones incorporated into TiO₂ lattice might take a positive role in photocatalysis. Compared with surface fluorination samples, FTO film exhibited better photocatalytic activity. The high photocatalytic activity of FTO may due to extrinsic absorption through the creation of oxygen vacancies rather than the excitation of the intrinsic absorption band of bulk TiO₂. Furthermore, the FTO can be recycled with little photocatalytic activity depression. Without any further treatment besides rinsing, after 6 recycle utilization, the photocatalytic activity of FTO film was still higher than 79%.     

Observation of p(1×1)-type rows on TiO2(110)-p(1×2) surface by scanning tunneling microscope (STM)

The TiO₂(110) surfaces were observed by a Scanning Tunneling Microscope (STM). We found two types of bright p(1×1)-type rows on the p(1×2) surface. One p(1×1)-type formed independently and corresponds to the bridging oxygen rows. The second p(1×1)-type appeared in a bright grouping, forming narrow rows, and corresponds to the five-fold titanium rows. The above results suggest the following two conclusions. First, the density of state (DOS) on the bridging oxygen rows becomes higher than that on the five-fold titanium atom rows when a bridging oxygen row exists independently on the p(1×2) surface. Second, the bright rows on a TiO₂(110)-p(1×1) surface correspond to the five-fold titanium atom rows. The results further show the validity of DOS calculations on the TiO₂(110)-p(1×1) surface by Diebold et al. [Phys. Rev. Lett. 77 (1996) 1322]. The difference of width for Ti₂O₃ unit rows on the p(1×2) and p(1×3) surfaces in STM images are also discussed.     

Features of the effect of vacuum arc discharge on a metal cathode surface in the presence of alkali-metal hydroxides and chlorides

The effect of KOH, NaOH, LiOH, Ba(OH)₂, as well as KCl and NaCl deposited onto the surface of hot-rolled steel samples on the results of their processing by vacuum arc discharge is studied. The extreme dependence of the processing speed, processed-surface roughness, and the probability of discharge ignition on the surface concentration of the substances is found. When depositing KOH with a concentration corresponding to the extreme point, the processing speed increases by a factor of 1.8, and the roughness decreases by a factor of 2.5. The results are discussed from the viewpoint of the probabilistic mechanism of the formation of elementary cathode spots followed by the formation of group cathode spots.     

Surface roughness analysis of hydrophilic SiO2/TiO2/glass nano bilayers by the level crossing approach

The effect of etching time on the statistical properties of hydrophilic surfaces of SiO₂/TiO₂/glass nano bilayers has been studied using atomic force microscopy (AFM) and a stochastic approach based on a level crossing analysis. We have created rough surfaces of the hydrophilic SiO₂/TiO₂ nano bilayer system by using 26% potassium hydroxide (KOH) solution. Measuring the average apparent contact angle allowed us to assess the degree of hydrophilicity, and the optimum condition was determined to be 10 min etching time. A level crossing analysis based on AFM images provided deeper insight into the microscopic details of the surface topography. With different etching times, it has been shown that the average frequency of visiting a height with positive slope behaves in a Gaussian manner for heights near the mean value and obeys a power law for heights far away from the mean value. Finally, by applying the generalized total number of crossings with positive slope, it was found that the both high heights and deep valleys of the surface have a great effect on the hydrophilic degree of the SiO₂/TiO₂/glass nano bilayer investigated system.     

InSb quantum dots and quantum rings on InAs-rich surface

We report a study of InSb nanoobjects (quantum dots and quantum rings) grown on InAs-rich surface by liquid phase epitaxy. Characterization of the sample surface was performed using atomic force microscopy (AFM). The bimodal formation of the uncapped InSb quantum dots (QDs) was observed for the growing on a binary InAs substrate. Uniform high-density (1 × 10¹⁰ cm⁻²) quantum dots with a height of 3 nm were obtained at T = 420-430 °C, whereas low-density (5 × 10⁸ cm⁻²) big quantum dots were 9 nm in height. As a buffer layer, lattice-matched InAsSb_0.12P_0.25 solid solution was deposed on InAs substrate using metal-organic vapour phase epitaxy. Deposition from the InSb melt on the buffer layer resulted in the formation of InSb nanoobjects with density as high as 3 × 10¹⁰ cm⁻².     

Growth and mechanism of titania nanowires

Anatase and rutile-phase titania nanowires have been prepared via an efficient molten salt-assisted and novel pyrolysis route, respectively. The growth of anatase nanowires is parallel to [010] direction. The anatase titanium oxide nanowires are obtained by exchange reaction between Na₂TiO₃ and HCl, whereas the formation of rutile titania nanowires is conventional vapor-liquid-solid growth mechanism.     

Surface chemistry and nonadecanoic acid adsorbate layers on TiO2(100) surfaces prepared at ambient conditions

The surface and adsorbate chemistry of the TiO₂(100) surface prepared at high temperatures and ambient conditions were studied by means of angle resolved X-ray photoelectron spectroscopy (AR-XPS), Low Energy Electron Diffraction (LEED) and Atomic Force Microscopy (AFM) based nanoshaving studies. The TiO₂(100) surface shows a 1 × 1 structure with a 1 × 3 superstructure assigned to surface defects. A significant hydroxide surface concentration was revealed by means of AR-XPS measurements. The adsorbate formation of nonadecanoic acid (NDCA) from ethanolic solution led to disordered sub-monolayer surface coverage. The weak interaction between the carboxylic acid group and the TiO₂ surface is assumed to be a combination of the neutral to acid behavior of the TiO₂ surface and the stable hydroxide surface layer created under ambient conditions.