可见光驱动Au/SrTiO3纳米等离子体光催化剂分解水制氢

采用水热法和光沉积法制备了Au/SrTiO_3纳米等离子体光催化剂。通过XRD、XPS、SEM、TEM、EDS和DRS等技术对光催化剂的结构、组成、形貌、粒子大小和光吸收性质等进行了表征,考察了Au/SrTiO_3纳米光催化剂在可见光照下的制氢性能。结果表明,采用水热法成功合成了SrTiO_3纳米粒子,通过负载Au纳米粒子后,由于表面等离子体共振效应,增强了其对可见光的吸收。此外,测试了不同Au负载量对SrTiO_3光催化剂在可见光照下制氢活性的影响,其中,5%Au/SrTiO_3光催化剂在可见光照下制氢活性最高,并对其光催化反应机理进行了进一步的探讨。     

反相微乳液法合成SrTiO3纳米棒

SrTiO₃ nanorods were synthesized in cetanyl trimethyl ammonium bromide (CTAB) reverse microemulsion containing CTAB, n-hexanol, n-octane and water with Ba(OH)₂ as reactants. The effects of different conditions such as ω₀ [ω₀=n_H2O/ n_CTAB], aging time and the concentration of reactants on the formation of the nanorods were studied. Transmission electron microscope (TEM), electron diffraction (ED) and X-ray diffraction(XRD)were used to characterize the morphology and the structure of the synthesized nanorods. The results show that SrTiO₃ nanorods with a length of 260～2 000 nm and a diameter of 50～100 nm belonging to single crystal are single cubic system. The molar ratio of Sr to Ti of products is 1.0 as determinded by ICP.     

纳米SrTiO3对高铁酸盐电化学性能影响研究

Two ferrates, K₂FeO₄ and BaFeO₄, had been prepared and characterized by XRD, IR and SEM. The electrochemical tests of the samples were carried out in the voltage range of 0.8～2.0 V and current density of 0.5～3.0 mA·cm^-2. The results indicated that performance of Zn-BaFeO₄ battery was superior to that of Zn-MnO₂ and Zn-K₂FeO₄ batteries. Nanometer SrTiO₃ prepared by Sol-gel methode with different ratio was added to the BaFeO₄ cathode in order to improve the discharge performance. The discharge capacity of the BaFeO₄ cathode was increased from 224 mAh·g^-1 to 246 mAh·g^-1 by addition of 5% nanometer SrTiO₃. The reason of enhancing BaFeO₄ electrochemical performance was discussed.     

Gd-N共掺杂SrTiO3/TiO2复合纳米纤维制备及光催化性能

以静电纺丝技术制备的TiO_2纳米纤维为基质和反应物,结合一步水热法制得Gd-N共掺杂SrTiO_3/TiO_2复合纳米纤维光催化剂。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电镜(HRTEM)、X射线光电子能谱(XPS)、紫外-可见漫反射(UV-Vis DRS)和荧光光谱(PL)等方法对其微观结构、形貌和光学性能进行表征。结果表明:SrTiO_3和TiO_2形成异质结能够使光生电子和空穴得到很好的分离,而Gd-N共掺杂产生新带隙,可以拓宽光谱响应范围至可见光区,并引起晶格缺陷,成为光生电子-空穴对的浅势捕获阱。Gd-N共掺杂与异质结的协同作用有效提高了SrTiO_3/TiO_2复合纳米纤维的可见光催化活性。     

OTS自组装单层膜诱导定向生长SrTiO3功能陶瓷薄膜

采用自组装单层膜技术,以三氯十八烷基硅烷(octadecyl-trichioro-silane,OTS)为模版,在玻璃基片上成功制备了钛酸锶晶态薄膜.改性基板的亲水性测定与金相显微镜测试表明,紫外光照射使基板由疏水转变为亲水,OTS单分子膜对薄膜的沉积具有诱导作用:X射线衍射(XRD)与扫描电镜(SEM)表征显示,制备成功的钛酸锶薄膜结晶良好,样品表面均匀,在垂直基板表面方向上呈花状生长:EDS能谱测试为钛酸锶薄膜的化学组成提供了有力的证据;同时探讨了白组装单层膜和钛酸锶薄膜的形成机理.     

Room temperature photoluminescence of amorphous BaxSr1−xTiO3 doped with chromium

ABO₃ amorphous materials, such as BaTiO₃ (BT), SrTiO₃ (ST), PbTiO₃ (PT), and Ba_xSr_1−xTiO₃ (BST) have recently attracted a good deal of attention due to their ferroelectric and electro-optical properties. Intense photoluminescence at room temperature was observed in amorphous titanate doped with chromium (Ba_xSr_1−xTi_1−yCr_yO₃) prepared by the polymeric precursor method. Results indicated that substantial luminescence at room temperature was achieved with the addition of small Cr contents to amorphous Ba_xSr_1−xTi_1−yCr_yO₃. Further addition of Cr or crystallization were deleterious to the intensity of the luminescent peak obtained for excitation using λ=488.0 nm.     

Ni-P-Zn3(PO4)2(ZnSnO3、ZnSiO3)纳米复合化学镀层性质和组成的研究

研究了温度、时间、浓度等对Ａ３钢片上Ｎi-P-Zn3(PO4)2、Ni-P-ZnSnO3和Ｎi-P-ZiSiO3纳米复合合化学镀层外貌的影响,用扫描电子显微镜（ＳＥＭ）观察外貌、称重法测定厚度;通过１０％ＮaCl溶液、１％Ｈ２Ｓ气体加速腐蚀试验,１０％ＣuSO4溶液点滴试验等多种手段测定其耐腐蚀性能,用Ｘ－射线光电子谱（ＸＰＳ）及俄歇电子能谱（ＳＥＳ）测定其价态组成,结果表明：在最佳施镀条件下,可得光亮、致密、耐腐蚀性强于Ａ３钢、磷化膜及Ｎi-P镀层的纳米复合化学镀层,镀层的原子百分组成约为（％）：Ｎi-P-Zn3(PO4)2:Ni70.00,P12.47,Zn3(PO4)213.93,C3.6;Ni-P-ZnSnO3;Ni77.56,P10.00,ZnSnO39.84,C2.6;Ni-P-NiSiO3,Ni83.00,P10.96,ZnSi5.15,C0.89.     

Effect of La2O3 on Catalytic Performance of Au/TiO2 for CO Oxidation

Pure TiO₂ and La-doped TiO₂ were prepared by the sol-gel method. Au was supported on TiO₂ by the deposition-precipitation (DP) method, and its catalytic activity for CO oxidation was tested. The results showed that doping La in Au/TiO₂ could improve its catalytic activity obviously for CO oxidation. The analyses of X-ray diffraction (XRD), temperature-programmed desorption (TPD), and Brunauer-Emmett-Teller (BET) surface area further showed that the presence of La in TiO₂ not only increased its surface area and restrained the growth of TiO₂ crystallites, but could also enhance the microstrain of TiO₂. In terms of O₂-TPD, a new adsorbed species O⁻ appeared on the surface of La-doped TiO₂. The results of in-situ Fourier transform-infrared (FT-IR) spectroscopy illustrated that the high activity of Au/La₂O₃-TiO₂ was attributed to the presence of La promoting the reactivity of CO adsorbed on the Au site and the formation of the second active site on the surface of TiO₂     

Non-centrosymmetric Ba3Ti3O6(BO3)2

The compound previously reported as Ba₂Ti₂B₂O₉ has been reformulated as Ba₃Ti₃B₂O₁₂, or Ba₃Ti₃O₆(BO₃)₂, a new barium titanium oxoborate. Small single crystals have been recovered from a melt with a composition of BaTiO₃:BaTiB₂O₆ (molar ratio) cooled between 1100°C and 850°C. The crystal structure has been determined by X-ray diffraction: hexagonal system, non-centrosymmetric space group, a=8.7377(11) Å, c=3.9147(8) Å, Z=1, wR(F²)=0.039 for 504 unique reflections. Ba₃Ti₃O₆(BO₃)₂ is isostructural with K₃Ta₃O₆(BO₃)₂. Preliminary measurements of nonlinear optical properties on microcrystalline samples show that the second harmonic generation efficiency of Ba₃Ti₃O₆(BO₃)₂ is equal to 95% of that of LiNbO₃.     

H2O + Fe(NO3)3 + Ni(NO3)2 ternary system isotherms at 0 °C and 30 °C

H₂O + Ni(NO₃)₂ binary system were investigated in the temperature range from −25 °C to 55 °C. The solid-liquid equilibria of the ternary system H₂O + Fe(NO₃)₃ + Ni(NO₃)₂ were studied using a synthetic method based on conductivity measurements. Tow isotherms were established at 0 °C and 30 °C, and the appearing stable solid phases are iron nitrate nonahydrate (Fe(NO₃)₃·9H₂O), iron nitrate hexahydrate (Fe(NO₃)₃·6H₂O), nickel nitrate hexahydrate (Ni(NO₃)₂·6H₂O) and nickel nitrate tetrahydrate (Ni(NO₃)₂·4H₂O).     

Synthesis, crystal structure, spectrum properties, and electronic structure of a novel non-centrosymmetric borate, BiCd3(AlO)3(BO3)4

A novel non-centrosymmetric borate, BiCd₃(AlO)₃(BO₃)₄, has been prepared by solid state reaction methods below 750 °C. Single-crystal XRD analysis showed that it crystallizes in the hexagonal group P6₃ with a=10.3919(15) Å, c=5.7215(11) Å, Z=2. In its structure, AlO₆ octahedra share edges to form 1D chains that are bridged by BO₃ groups through sharing O atoms to form the 3D framework. The 3D framework affords two kinds of channels that are occupied by Bi³⁺/Cd²⁺ atoms only or by Bi³⁺/Cd²⁺ atoms together with BO₃ groups. The IR spectrum further confirmed the presence of BO₃ groups. Second-harmonic-generation measurements displayed a response of about 0.5×KDP (KH₂PO₄). UV-vis diffuse reflectance spectrum showed a band gap of about 3.19 eV. Solid-state fluorescence spectrum exhibited the maximum emission peak at around 390.6 nm. Band structure calculations indicated that it is an indirect semiconductor.     

Composition dependence of the photophysical and photocatalytic properties of (AgNbO3)1−x(NaNbO3)x solid solutions

A series of orthorhombic photocatalysts (AgNbO₃)_1−x(NaNbO₃)_x solid solutions have been synthesized by a solid-state reaction method. The composition dependence of the photophysical and photocatalytic properties of synthesized solid solutions has been investigated systematically. With an increase in the content of NaNbO₃, we found that (1) the lattice parameters decreased; (2) the Nb-O bond length in NbO₆ octahedron reduced; (3) the band gap increased; and (4) the mean particle size decreased while the Brunauer-Emmett-Teller (BET) surface area increased. Photocatalytic activities of the (AgNbO₃)_1−x(NaNbO₃)_x (0?x?0.5) samples were evaluated from gaseous 2-propanol (IPA) decomposition into acetone and CO₂ under visible-light irradiation emitted from blue-light-emitting diodes (BLEDs; light intensity: 0.01 mW cm⁻²). Among all the samples, the (AgNbO₃)_0.6(NaNbO₃)_0.4 sample showed the highest photocatalytic activity.     

Cr2(WO4)3和Cr2(MoO4)3的负热膨胀特性研究

用液相反应-前驱物烧结法制备了Cr₂(WO₄)₃和Cr₂(MoO₄)₃粉体。298～1 073 K的原位粉末X射线衍射数据表明Cr₂(WO₄)₃和Cr₂(MoO₄)₃的晶胞体积随温度的升高而增大, 本征线热膨胀系数分别为(1.274±0.003)×10^-6 K^-1和(1.612±0.003)×10^-6 K^-1。用热膨胀仪研究了Cr₂(WO₄)₃和Cr₂(MoO₄)₃在静态空气中298～1 073 K范围内热膨胀行为，即开始表现为正热膨胀，随后在相转变点达到最大值，最后表现为负热膨胀，其负热膨胀系数分别为(-7.033±0.014)×10^-6 K^-1和(-9.282±0.019)×10^-6 K^-1。     

IR and Raman spectra of two layered aluminium phosphates Co(en)3Al3P4O16 · 3H2O and [NH4]3[Co(NH3)6]3[Al2(PO4)4]2 · 2H2O

The FT IR and FT Raman spectra of Co(en)₃Al₃P₄O₁₆ · 3H₂O (compound I) and [NH₄]₃[Co(NH₃)₆]₃[Al₂(PO₄)₄]₂ · 2H₂O (compound II) are recorded and analysed based on the vibrations of Co(en)₃³⁺, Co(NH₃)₆³⁺, NH₄⁺, Al---O---P, PO₃, PO₂ and H₂O. The observed splitting of bands indicate that the site symmetry and correlation field effects are appreciable in both the compounds. In compound I, the overtone of CH₂ deformation Fermi resonates with its symmetric stretching vibration. The NH₄ ion in compound II is not free to rotate in the crystalline lattice. Hydrogen bonding of different groups is also discussed.     

Bi掺杂对La_(0.1)Sr_(0.9)TiO_3陶瓷热电性能的影响

在5%H_2+95%N_2(V/V)还原气氛中1 500℃烧结4 h制备La_(0.1)Bi_xSr_(0.9-x)TiO_3(x=0、0.05、0.075、0.1)陶瓷,并对其组成、显微结构和热电性能进行研究。结果表明:掺Bi试样的主晶相均为Sr Ti O3,当Bi掺杂量大于0.075时,样品中出现少量Bi_2O_3杂相;掺Bi试样的晶粒发育完全,形状规则,结合紧密,显示出Bi_2O_3良好的助烧效果。另外,Bi元素掺入使La_(0.1)Sr_(0.9)TiO_3陶瓷的电导率和Seebeck系数绝对值显著增加,说明Bi元素的掺入可有效提高材料的载流子浓度和载流子迁移率。其中,x=0.075时试样的功率因子最大,在400℃时为692μW·m~(-1)·K~(-2)。虽然其热导率比未掺杂Bi试样有所提高,x=0.075时试样的ZT值在500℃时仍可达0.172,比未掺杂Bi试样提高了130%。     

Bi掺杂对La0.1Sr0.9TiO3陶瓷热电性能的影响

在5% H₂+95% N₂（V/V）还原气氛中1 500℃烧结4 h制备La_0.1Bi_xSr_0.9-xTiO₃（x=0、0.05、0.075、0.1）陶瓷,并对其组成、显微结构和热电性能进行研究。结果表明：掺Bi试样的主晶相均为SrTiO₃,当Bi掺杂量大于0.075时,样品中出现少量Bi₂O₃杂相;掺Bi试样的晶粒发育完全,形状规则,结合紧密,显示出Bi₂O₃良好的助烧效果。另外,Bi元素掺入使La_0.1Sr_0.9TiO₃陶瓷的电导率和Seebeck系数绝对值显著增加,说明Bi元素的掺入可有效提高材料的载流子浓度和载流子迁移率。其中,x=0.075时试样的功率因子最大,在400℃时为692 μW·m^-1·K^-2。虽然其热导率比未掺杂Bi试样有所提高,x=0.075时试样的ZT值在500℃时仍可达0.172,比未掺杂Bi试样提高了130%。     

NO在Mn_2O_3(110)表面吸附的密度泛函理论研究

基于第一性原理密度泛函计算方法研究了NO在Mn_2O_3(110)面的吸附行为,计算了Mn_2O_3(110)面吸附NO和O_2的吸附构型的结构参数、吸附能和电子结构.结果表明,在Mn_2O_3(110)表面上,NO倾向于吸附在Mn top位,吸附前后的结构总能变化在-0.61~-1.29 eV之间,NO吸附后Mn吸附位周围的配位结构发生变化,使得Mn的电子向NO转移.进一步研究了吸附O_2后的Mn_2O_3表面再进一步吸附NO的行为,发现了ONOO*结构的形成.NO和O_2在表面共吸附形成ONOO*结构时的吸附能(-1.23和-1.39 eV)高于单纯吸附NO时的吸附能,此时Mn的电子向ONOO*结构转移,NO和O_2投影态密度的电子峰广泛交叠,说明成键原子之间有强共价键作用.     

Synthesis, crystal structure, infrared and Raman spectra of Sr4Cu3(AsO4)2(AsO3OH)4·3H2O and Ba2Cu4(AsO4)2(AsO3OH)3

The two new compounds, Sr₄Cu₃(AsO₄)₂(AsO₃OH)₄·3H₂O (1) and Ba₂Cu₄(AsO₄)₂(AsO₃OH)₃(2), were synthesized under hydrothermal conditions. They represent previously unknown structure types and are the first compounds synthesized in the systems SrO/BaO-CuO-As₂O₅-H₂O. Their crystal structures were determined by single-crystal X-ray diffraction [space group C2/c, a=18.536(4) Å, b=5.179(1) Å, c=24.898(5) Å, β=93.67(3)°, V=2344.0(8) Å³, Z=4 for 1; space group P4₂/n, a=7.775(1) Å, c=13.698(3) Å, V=828.1(2) Å³, Z=2 for 2]. The crystal structure of 1 is related to a group of compounds formed by Cu²⁺-(XO₄)³⁻ layers (X=P⁵⁺, As⁵⁺) linked by M cations (M=alkali, alkaline earth, Pb²⁺, or Ag⁺) and partly by hydrogen bonds. In 1, worth mentioning is the very short hydrogen bond length, D···A=2.477(3) Å. It is one of the examples of extremely short hydrogen bonds, where the donor and acceptor are crystallographically different. Compound 2 represents a layered structure consisting of Cu₂O₈ centrosymmetric dimers crosslinked by As1φ₄ tetrahedra, where φ is O or OH, which are interconnected by Ba, As2 and hydrogen bonds to form a three-dimensional network. The layers are formed by Cu₂O₈ centrosymmetric dimers of CuO₅ edge-sharing polyhedra, crosslinked by As1O₄ tetrahedra. Vibrational spectra (FTIR and Raman) of both compounds are described. The spectroscopic manifestation of the very short hydrogen bond in 1, and ABC-like spectra in 2 were discussed.     

H2分子在LaFeO3表面吸附的第一性原理研究

基于密度泛函理论的第一性原理方法,通过计算表面能确定LaFeO₃(010)表面为最稳定的吸附表面,研究了H₂分子在LaFeO₃(010)表面的吸附性质。LaFeO₃(010)表面存在LaO和FeO₂两种终止表面,但吸附主要发生在FeO₂终止表面,由于LaFeO₃(010)表面弛豫的影响,使得凹凸不平的表面层增加了表面原子与H原子的接触面积,表面晶胞的纵向体积增加约2.5%,有利于H原子向晶体内扩散。研究发现,H₂分子在LaFeO₃(010)表面主要存在3种化学吸附方式:第一种吸附发生在O-O桥位,2个H原子分别吸附在2个O原子上,形成2个-OH基,这是最佳吸附位置,此时H原子与表面O原子的作用主要是H1s与O2p轨道杂化作用的结果,H-O之间为典型的共价键。H₂分子的解离能垒为1.542 eV,说明表面需要一定的热条件,H₂分子才会发生解离吸附;第二种吸附发生在Fe-O桥位,1个H原子吸附在O原子上形成1个-OH基,另一个H原子吸附在Fe原子上形成金属键;第三种吸附发生在O顶位,2个H原子吸附在同一个O原子上,形成H₂O分子,此时H₂O分子与表面形成物理吸附,H₂O分子逃离表面后容易形成氧空位。此外,H₂分子在LaFeO₃(010)表面还可以发生物理吸附。     

H2分子在LaFeO3表面吸附的第一性原理研究

基于密度泛函理论的第一性原理方法,通过计算表面能确定La Fe O_3(010)表面为最稳定的吸附表面,研究了H_2分子在La Fe O_3(010)表面的吸附性质。La Fe O_3(010)表面存在La O和Fe O_2两种终止表面,但吸附主要发生在Fe O_2终止表面,由于La Fe O_3(010)表面弛豫的影响,使得凹凸不平的表面层增加了表面原子与H原子的接触面积,表面晶胞的纵向体积增加约2.5%,有利于H原子向晶体内扩散。研究发现,H_2分子在La Fe O_3(010)表面主要存在3种化学吸附方式:第一种吸附发生在O-O桥位,2个H原子分别吸附在2个O原子上,形成2个-OH基,这是最佳吸附位置,此时H原子与表面O原子的作用主要是H1s与O_2p轨道杂化作用的结果,H-O之间为典型的共价键。H_2分子的解离能垒为1.542 e V,说明表面需要一定的热条件,H_2分子才会发生解离吸附;第二种吸附发生在Fe-O桥位,1个H原子吸附在O原子上形成1个-OH基,另一个H原子吸附在Fe原子上形成金属键;第三种吸附发生在O顶位,2个H原子吸附在同一个O原子上,形成H_2O分子,此时H_2O分子与表面形成物理吸附,H_2O分子逃离表面后容易形成氧空位。此外,H_2分子在La Fe O_3(010)表面还可以发生物理吸附。