Mesoporous MnO2 as enzyme immobilization host for amperometric glucose biosensor construction

Mesoporous MnO₂ (mesoMnO₂) is synthesized facilely through sol–gel process using nonionic surfactant polyxyethylene fatty alcohol (AEO₉) as template. Transmission electron microscopy (TEM) image and N₂ adsorption/desorption isotherm show that the obtained mesoMnO₂ material presents disordered porous structure and appropriate pore size suitable for the immobilization of glucose oxidase (GOx). An amperometric glucose biosensor based on GOx entrapped in mesoMnO₂ is fabricated, in which mesoMnO₂ also acts as a catalyst for the electrochemical oxidation of H₂O₂ produced by enzyme reaction. The biosensor shows fast and sensitive current response to glucose in the linear range of 0.0009–2.73 mM. The response time (t_95%) is less than 7 s. The sensitivity and detection limit are 24.2 μA cm⁻² mM⁻¹ and 1.8 × 10⁻⁷ M (S/N = 3), respectively. This indicates that mesoMnO₂ has promising application in enzyme immobilization and biosensor construction.     

Electrospun palladium (IV)-doped copper oxide composite nanofibers for non-enzymatic glucose sensors

Pd (IV)-doped CuO oxide composite nanofibers (PCNFs) have been successfully fabricated via electrospinning and then employed to construct an amperometric non-enzymatic glucose sensor. The PCNFs based glucose sensors display distinctly enhanced electrocatalytic activity towards the oxidation of glucose, showing significantly lower overvoltage (0.32 V) and ultrafast (1 s) and ultrasensitive current (1061.4 μA mM⁻¹ cm⁻²) response with a lower detection limit of 1.9 × 10⁻⁸ M (S/N = 3). Additionally, excellent selectivity, reproducibility and stability have also been obtained. These results indicate that PCNFs are promising candidates for amperometric non-enzymatic glucose detection.     

A new hydrogen peroxide biosensor based on gold nanoelectrode ensembles/multiwalled carbon nanotubes/chitosan film-modified electrode

Gold nanoelectrode ensembles were produced by electrodeposition using multiwalled carbon nanotubes (MWNTs) as template. A new third generation amperometric biosensor for hydrogen peroxide was developed based on adsorption of horseradish peroxidase (HRP) at the glassy carbon (GC) electrode modified with Au nanoelectrode ensembles/multiwalled carbon nanotubes/chitosan film. The resulting HRP biosensor offered an excellent detection for hydrogen peroxide at −0.11 V with a linear response range of 2.08 × 10⁻⁷ to 7.6 × 10⁻³ M with a correlation coefficient of 0.998, and response time <5 s. The detection limit was 1.02 × 10⁻⁷ M at 3σ. The biosensor displays rapid response, expanded linear response range, and excellent repeatability. The simple and fast fabrication of the sensor makes it superior to other techniques.     

Electroanalysis of Dopamine at RuO2 Modified Vertically Aligned Carbon Nanotube Electrode

Electrochemical behavior of dopamine at the RuO₂‐modified vertically aligned carbon nanotubes electrode was investigated by cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The RuO₂‐modified carbon nanotube electrode showed higher electrocatalytic activity towards the oxidation of dopamine than the MWNTs electrode in 0.10 M phosphate buffer solution. At an applied potential of +0.4 V, the RuO₂/MWNTs electrode exhibited a wide detection range up to 3.6×10^?3 M with detection limit of 6.0×10^?8 M (signal/noise=3) for dopamine determination. Meanwhile, the optimized sensor for dopamine displayed a sensitivity of 83.8 μA mM^?1 and response time of 5 s with addition of 0.20 mM dopamine. In addition, DPV experiment revealed that interfering species such as ascorbic acid and uric acid could be effectively avoided. The RuO₂/MWNTs electrode presents stable, highly sensitive, favorable selectivity and fast amperometric response of dopamine.     

Composite film of carbon nanotubes and chitosan for preparation of amperometric hydrogen peroxide biosensor

A new amperometric biosensor for hydrogen peroxide was developed based on cross-linking horseradish peroxidase (HRP) by glutaraldehyde with multiwall carbon nanotubes/chitosan (MWNTs/chitosan) composite film coated on a glassy carbon electrode. MWNTs were firstly dissolved in a chitosan solution. Then the morphology of MWNTs/chitosan composite film was characterized by field-emission scanning electron microscopy. The results showed that MWNTs were well soluble in chitosan and robust films could be formed on the surface. HRP was cross-linked by glutaraldehyde with MWNTs/chitosan film to prepare a hydrogen peroxide biosensor. The enzyme electrode exhibited excellent electrocatalytic activity and rapid response for H₂O₂ in the absence of a mediator. The linear range of detection towards H₂O₂ (applied potential: −0.2 V) was from 1.67 × 10⁻⁵ to 7.40 × 10⁻⁴ M with correction coefficient of 0.998. The biosensor had good repeatability and stability for the determination of H₂O₂. There were no interferences from ascorbic acid, glucose, citrate acid and lactic acid.     

Nanocrystalline ZnMn2O4 as a novel lithium-storage material

Nanocrystalline ZnMn₂O₄ is prepared by a polymer-pyrolysis route and used as a novel anode for lithium ion batteries. XRD and HRTEM studies reveal that the products are highly phase-pure and 30–60 nm in size. Galvanostatic cycling of ZnMn₂O₄ electrode at 100 mA g⁻¹ (about 0.52 mA cm⁻²) between 0.01 and 3.0 V up to 50 cycles exhibits almost stable cycling performance between 10 and 50 cycles with only an average capacity fade of 0.20% per cycle and the electrode still maintains a capacity of 569 mAh g⁻¹ after 50 cycles.     

Palladized aluminum electrode covered by Prussian blue film as an effective transducer for electrocatalytic oxidation and hydrodynamic amperometry of N-acetyl-cysteine and glutathione

The mediated oxidation of N-acetyl cysteine (NAC) and glutathione (GL) at the palladized aluminum electrode modified by Prussian blue film (PB/Pd–Al) is described. The catalytic activity of PB/Pd–Al was explored in terms of Fe^III[Fe^III(CN)₆]/Fe^III[Fe^II(CN)₆]¹⁻ system by taking advantage of the metallic palladium layer inserted between PB film and Al, as an electron-transfer bridge. The best mediated oxidation of NAC and GL on the PB/Pd–Al electrode was achieved in 0.5 M KNO₃ + 0.2 M potassium acetate of pH 2. The mechanism and kinetics of the catalytic oxidation reactions of the both compounds were monitored by cyclic voltammetry and chronoamperometry. The charge transfer-rate limiting step as well as overall oxidation reaction of NAC or GL is found to be a one-electron abstraction. The values of transfer coefficients α, catalytic rate constant k and diffusion coefficient D are 0.5, 3.2 × 10² M⁻¹ s⁻¹ and 2.45 × 10⁻⁵ cm² s⁻¹ for NAC and 0.5, 2.1 × 10² M⁻¹ s⁻¹ and 3.7 × 10⁻⁵ cm² s⁻¹ for GL, respectively. The modifying layers on the Pd–Al substrate have reproducible behavior and a high level of stability in the electrolyte solutions. The modified electrode is exploited for hydrodynamic amperometry of NAC and GL. The amperometric calibration graph is linear in concentration ranges 2 × 10⁻⁶–40 × 10⁻⁶ for NAC and 5 × 10⁻⁷–18 × 10⁻⁶ M for GL and the detection limits are 5.4 × 10⁻⁷ and 4.6 × 10⁻⁷ M, respectively.     

Separation and determination of l-tyrosine and its metabolites by capillary zone electrophoresis with a wall-jet amperometric detection

A method of capillary electrophoresis with wall-jet amperometric detection (AD) has been developed for separation and determination of l-tyrosine (Tyr) and its metabolites, such as Tyramine (TA), p-hydroxyphenylpyruvic (pHPP), homogentisic acid (HGA) and some dipeptides containing Tyr, such as Tyr-Gly-Gly (YGG), Tyr-Arg (YR) and Tyr-d-Arg (Y-d-R). A carbon disk electrode was used as the working electrode and the optimal detection potential was 1.00 V (versus Ag/AgCl). At 18 kV of applied voltage, the seven compounds were completely separated within 20 min in 110 × 10⁻³ mol/L Na₂HPO₄–NaH₂PO₄ buffer (pH 7.10) containing 3 × 10⁻³ mol/L β-cyclodextrin (β-CD). Good linear relationship was obtained for all analytes and the detection limits of seven analytes were in the range of 0.95–4.25 ng/mL. The proposed method has been applied to examine the metabolic process of l-tyrosine in rabbit's urine.     

Amperometric glucose biosensor based on a gold nanorods/cellulose acetate composite film as immobilization matrix

We report on the utilization of gold nanorods to create a highly responsive glucose biosensor. The feasibility of an amperometric glucose biosensor based on immobilization of glucose oxidase (GOx) in gold nanorod is investigated. GOx is simply mixed with gold nanorods and cross-linked with a cellulose acetate (CA) medium by glutaraldehyde. The adsorption of GOx on the gold nanorods is confirmed by X-ray photoelectron spectroscopy (XPS) measurements. Circular dichroism (CD) and UV-spectrum results show that the activity of GOx was preserved after conjugating with gold nanorods. The current response of modified electrode is 10 times higher than that of without gold nanorods. Under optimal conditions, the biosensor shows high sensitivity (8.4 μA cm⁻² mM⁻¹), low detection limit (2 × 10⁻⁵ M), good storage stability and high affinity to glucose (). A linear calibration plot is obtained in the wide concentration range from 3 × 10⁻⁵ to 2.2 × 10⁻³ M.     

A new modified conducting carbon composite electrode as sensor for ascorbate and biosensor for glucose

A new carbon-based conducting composite has been developed as electrochemical sensor and biosensor for the amperometric detection of ascorbate and glucose. Electrocatalytic oxidation of ascorbate has been done successfully at unmodified cellulose acetate-graphite composite electrodes, the sensor being highly sensitive, selective and with a low detection limit at 0.0 V vs. SCE and was successfully applied for ascorbate determination in commercial fruit juice samples. An interference free glucose biosensor has also been developed, based on the immobilisation of glucose oxidase by cross-linking with glutaraldehyde on poly (neutral red) modified composite electrodes. The biosensor exhibits a higher sensitivity of 31.5 ± 1.7 µA cm^− 2 mM^− 1 than other carbon-composite-based glucose biosensors, a detection limit of 20.3 µM and a very short response time.     

Multilayer structured carbon nanotubes/poly-l-lysine/laccase composite cathode for glucose/O2 biofuel cell

Multilayer film of laccase, poly-l-lysine (PLL) and multi-walled carbon nanotubes (MWNTs) were prepared by a layer-by-layer self-assembly technique. The results of the UV–vis spectroscopy and scanning electron microscopy studies demonstrated a uniform growth of the multilayer. The catalytic behavior of the modified electrode was investigated. The (MWNTs/PLL/laccase)_n multilayer modified electrode catalyzed four-electron reduction of O₂ to water, without any mediator. The possible application of the laccase-catalyzed O₂ reduction at the (MWNTs/PLL/laccase)_n multilayer modified ITO electrode was illustrated by constructing a glucose/O₂ biofuel cell with the (MWNTs/thionine/AuNPs)₈ GDH film modified ITO electrode as a bioanode and the (MWNTs/PLL/laccase)₁₅ film modified ITO electrode as a biocathode. The open-circuit voltage reached to 700 mV, and the maximum power density achieved 329 μW cm⁻² at 470 mV of the cell voltage.     

Sub- and post-micellar catalytic and inhibitory effects of cetlytrimethylammonium bromide in the permanganate oxidation of phenylalanine

The kinetics of phenylalanine (phe) oxidation by permanganate has been investigated in absence and presence of cetlytrimethylammonium bromide (CTAB) using conventional spectrophotometric technique. The rate shows first- and fractional-order dependence on [MnO₄⁻] and [phe] in presence of CTAB. At lower values of [CTAB] (≤10.0 × 10⁻⁴ mol dm⁻³), the catalytic ability of CTAB aggregates are strong. In contrast, at higher values of [CTAB] (≥10.0 × 10⁻⁴ mol dm⁻³), the inhibitory effect was observed in absence of H₂SO₄. We find that anions (Br⁻, Cl⁻ and NO₃⁻) in the form of sodium salts are strong inhibitors for the CTAB catalyzed oxidation. Kinetic and spectrophotometric evidences for the formation of an intermediate complex and an ion-pair complex between phe and MnO₄⁻, CTAB and MnO₄⁻, respectively, are presented. A mechanism consistent with kinetic results has been discussed. Complex formation constant (K_c) and micellar binding constant (K_s) were calculated at 30 °C and found to be K_c = 319 mol⁻¹ dm⁻³ and K_s = 1127 mol⁻¹ dm⁻³, respectively.     

TNT determination based on its degradation by immobilized HRP with electrochemical sensor

Based on the mechanism of 2,4,6-Trinitrotoluene (TNT) degradation, an amperometric hydrogen peroxide biosensor was constructed for the determination of trace amounts of TNT by immobilization of MWCNTs, HRP and Nafion onto the surface of glassy carbon electrode (GCE). The Nafion/MWCNTs/HRP biosensor was capable of degrading TNT with the consumption of H₂O₂ and HRP in 0.2 mol/L PBS (pH 7.0). Trace TNT was quantitative analyzed by the current decrease of H₂O₂ at the reductive potential of −0.35 V using cyclic voltammetry (CV). Effect of the ratio of MWCNTs/HRP, initial concentration of H₂O₂ and electrolyte’s pH were also optimized by CV. Under the optimal conditions, the current decrease of H₂O₂ that was consumed by TNT degradation was proportional to TNT ranging from 8.8 × 10⁻⁹ mol/L to 2.64 × 10⁻⁷ mol/L with a detection limit of 3.0 × 10⁻⁹ mol/L (S/N = 3). It developed a new way for simple, rapid and sensitive measurement of trace TNT.     

Electrocatalytic Oxidation of Glucose at Carbon Nanotubes Supported PtRu Nanoparticles and Its Detection

PtRu nanoparticles were supported on multiwall carbon nanotubes (MWNTs), which were further fabricated as an electrode for nonenzymatic glucose sensing. Transmission electron microscope and X‐ray diffraction patterns were used for characterization of the PtRu nanoparticles on MWNTs. Cyclic voltammetry and chronopotentiometry were applied to investigate the performance of the PtRu/MWNTs nanocomposite electrode for nonenzymatic oxidation of glucose. The PtRu/MWNTs electrode shows high electrocatalytic activity towards the oxidation of glucose in 0.1 M NaOH solution and thus can be used to selectively detect glucose. Under the optimal potential (+0.55 V vs. Ag/AgCl), the biosensor effectively performs a selective electrochemical analysis of glucose in the presence of common interferents, such as ascorbic acid (AA), dopamine (DP) and uric acid (UA). Wide linear calibration ranging from 1 mM to 15 mM, high sensitivity of 28.26 μA cm^?2 mM^?1, low detection limit of 2.5×10^?5 M, and fast response time of 10 s were achieved for the detection of glucose at the PtRu/MWNTs electrode.     

C60 trianion-mediated electrocatalysis and amperometric sensing of hydrogen peroxide

Heterogeneous electrocatalytic reduction of hydrogen peroxide (H₂O₂) by C₆₀ is reported for the first time. C₆₀ is embedded in tetraoctylammonium bromide (TOAB) film and is characterized by scanning electron microscopy and cyclic voltammetry. Electrocatalytic studies show that the trianion of C₆₀ mediates the electrocatalytic reduction of H₂O₂ in aqueous solution containing 0.1 M KCl. Application of such film modified electrode as an amperometric sensor for H₂O₂ determination is also examined. The sensor shows a fast response within 1 s and a linear response is obtained (R = 0.9986) in the concentration range from 3.33 × 10⁻⁵ to 2.05 × 10⁻³ mol L⁻¹ for H₂O₂, with the detection limit of 2 × 10⁻⁵ mol L⁻¹ and the sensitivity of 1.65 μA mM⁻¹. A good repeatability and stability is shown for the sensor during the experiment.     

Nonenzymatic Electrochemical Glucose Sensor Based on Pt Nanoparticles/Mesoporous Carbon Matrix

A nonenzymatic amperometric sensor for sensitive and selective detection of glucose has been constructed by using highly dispersed Pt nanoparticles supported onto mesoporous carbons (MCs). The Pt nanoparticles/mesoporous carbons (Pt/MCs) composites modified electrode displayed high electrocatalytic activity towards the oxidation of glucose. At an applied potential of 0.1 V, the Pt/MCs electrode has a linear dependence (R=0.996) in the glucose concentration up to 7.5 mM with a sensitivity of 8.52 mA M^?1 cm^?2. The Pt/MCs electrode has also shown highly resistant toward poisoning by chloride ions and without interference from the oxidation of common interfering species.     

Synthesis and characterization of MnO2 colloids

This work addresses the issue of radiation chemical synthesis of MnO₂ nanoparticles and also illustrates the ease of formation of nanorods and sheets by adroit manipulation of experimental conditions. The radiation chemical yield (G-value) for reduction of Mn (VII) by the hydrated electron was found to be 0.27 μmol J⁻¹ and 0.17 μmol J⁻¹ respectively, when tert. butanol and isopropanol were used as scavengers in nitrogen-saturated solutions. The colloids formed upon irradiation of air-saturated solution and N₂-purged solution with tert. butanol as scavenger were found to be most stable. Irradiation of air-saturated solution containing 4×10⁻⁴ M KMnO₄ at a dose of 1692 Gy resulted in the formation of nanorods of the dimension 100–150 nm and nanospheres in the range 10–20 nm. Irradiation of N₂-purged solution containing tert. butanol as scavenger for OH-produced reticulated structure of nanorods with length varying from 50 to 100 nm at a dose of 1692 Gy. Elemental analysis was performed using scanning electron microscope on MnO₂ formed by reduction and oxidation and the purity was found to be 98% of elemental Mn content.     

A highly sensitive hydrogen peroxide amperometric sensor based on MnO2-modified vertically aligned multiwalled carbon nanotubes

In this report, a highly sensitive amperometric sensor based on MnO₂-modified vertically aligned multiwalled carbon nanotubes (MnO₂/VACNTs) for determination of hydrogen peroxide (H₂O₂) was fabricated by electrodeposition. The morphology of the nanocomposite was characterized by scanning electron microscopy, energy-dispersive X-ray spectrometer and X-ray diffraction. Cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy were applied to investigate the electrochemical properties of the MnO₂/VACNTs nanocomposite electrode. The mechanism for the electrochemical reaction of H₂O₂ at the MnO₂/VACNTs nanocomposite electrode was also discussed. In borate buffer (pH 7.8, 0.20 M), the MnO₂/VACNTs nanocomposite electrode exhibits a linear dependence (R = 0.998) on the concentration of H₂O₂ from 1.2 × 10⁻⁶ M to 1.8 × 10⁻³ M, a high sensitivity of 1.08 × 10⁶ μA M⁻¹ cm⁻² and a detection limit of 8.0 × 10⁻⁷ M (signal/noise = 3). Meanwhile, the MnO₂/VACNTs nanocomposite electrode is also highly resistant towards typical inorganic salts and some biomolecules such as acetic acid, citric acid, uric acid and d-(+)-glucose, etc. In addition, the sensor based on the MnO₂/VACNTs nanocomposite electrode was applied for the determination of trace of H₂O₂ in milk with high accuracy, demonstrating its potential for practical application.     

Amperometric determination of hydrogen peroxide with a manganese dioxide film-modified screen printed carbon electrode

A carbon thick film electrode modified with an MnO₂-film is investigated as an amperometric detector for hydrogen peroxide in flow-injection analysis (FIA). At an operating potential of +0.48 V vs. Ag/AgCl catalytic oxidation of the analyte is exploited for amperometric monitoring. Experimental parameters, such as pH of the carrier, working potential, flow rate and injection volume, are optimized. The amperometric signals are linearly proportional to the concentration of H₂O₂ in the range from 0.005 to 10 mg/L, showing a detection limit (3σ) of 2.3 μg/L. The method is applied to the determination of H₂O₂ in rain water and to a simple assay to quantify glucose in human plasma. Received: 29 January 1998 / Revised: 4 May 1998 / Accepted: 13 May 1998     

Voltammetry of immobilized cytochrome c on novel binary self-assembled monolayers of thioctic acid and thioctic amide modified gold electrodes

Horse heart cytochrome c (cyt c) was adsorbed on the binary self-assembled monolayers (SAMs) composed of thioctic acid (T-COOH) and thioctic amide (T-NH₂) at gold electrodes via electrostatic interaction. The cyt c adsorbed on the modified gold electrode exhibited well-defined reversible electrochemical behavior in 10 mM phosphate buffer solution (PBS, pH 7.0). The surface concentration (Γ) of electroactive species, cyt c, on the binary SAMs was higher than that in single-component SAMs of T-COOH, and reached a maximum value of 9.2 × 10⁻¹² mol cm⁻² when the ratio of T-COOH to T-NH₂ in adsorption solution was of 3:2, and the formal potential (E^0′=(E_pa+E_pc)/2) of cyt c was −0.032 V (vs. Ag|AgCl (3 M NaCl)) in a 10 mM PBS. The interaction between cyt c and the binary SAMs made the E^0′ shift negatively when compared with that of cyt c in solution (+0.258 V vs. NHE, i.e., +0.058 V vs. Ag|AgCl (3 M NaCl)). The fractional coverage of bound cyt c was a 0.64 theoretical monolayer. The standard electron transfer rate constant of cyt c immobilized on the binary SAMs was also higher than that on single-component SAMs of T-COOH, and the maximum value of 15.8 ± 0.6 s⁻¹ was obtained when the ratio of T-COOH to T-NH₂ in adsorption solution was at 3:2. The results suggest that the electrode modified with the binary SAMs functions better than the electrode modified with single-component SAMs of T-COOH.