Enhanced reactivity and enantioselectivity in catalytic glyoxylate-ene reactions using chiral bis(oxazoline)–copper complex in an ionic liquid

An optimal hydrophobic ionic liquid was discovered as a solvent for highly enantioselective glyoxylate-ene reactions catalyzed by a chiral bis(oxazoline)–copper complex. The reactivity and stereoselectivity were highly dependent upon the property of the ionic liquids; reactions between olefins and ethyl glyoxylate in [Bmim]SbF₆ at ambient temperature provided remarkably enhanced reactivity and stereoselectivity, which greatly exceed those of the corresponding reactions in dichloromethane. Furthermore, the metal–ligand complex was readily recycled up to eight times while exhibiting no significant decrease in reaction efficiency.     

The role of neutral anions in ionic liquid as solvent media for the reactivity and stereoselectivity towards asymmetric Michael addition reaction of n-pentanal with β-nitrostyrene catalyzed by L-Proline

Michael addition reactions of n-pentanal with ß-nitrostyrene in achiral and chiral ionic liquids catalyzed by l-proline were studied. Results indicate anion plays an important role as weak coordination properties in the reactivity and stereoselectivity towards Michael product. 1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Bmim][NTf₂]) ionic liquid was found to be the best solvent media with a high yield (up to 90%) and a high diastereomeric ratio (syn/anti: 91/9), with moderate enantioselectivity (38% ee) among ten ionic liquids tested. The ionic liquid has been reusable over five numbers of cycles.     

Improved preparation and use of room-temperature ionic liquids in lipase-catalyzed enantio- and regioselective acylations.

Polar organic solvents such as methanol or N-methylformamide inactivate lipases. Although ionic liquids such as 3-alkyl-1-methylimidazolium tetrafluoroborates have polarities similar to these polar organic solvents, they do not inactivate lipases. To get reliable lipase-catalyzed reactions in ionic liquids, we modified their preparation by adding a wash with aqueous sodium carbonate. Lipase-catalyzed reactions that previously did not occur in untreated ionic liquids now occur at rates comparable to those in nonpolar organic solvents such as toluene. Acetylation of 1-phenylethanol catalyzed by lipase from Pseudomonas cepacia (PCL) was as fast and as enantioselective in ionic liquids as in toluene. Ionic liquids permit reactions in a more polar solvent than previously possible. Acetylation of glucose catalyzed by lipase B from Candida antarctica (CAL-B) was more regioselective in ionic liquids because glucose is up to one hundred times more soluble in ionic liquids. Acetylation of insoluble glucose in organic solvents yielded the more soluble 6-O-acetyl glucose, which underwent further acetylation to give 3,6-O-diacetyl glucose (2-3:1 mixture). However, acetylation of glucose in ionic liquids yielded only 6-O-acetyl glucose (>13:1 and up to >50:1).     

Osmium catalyzed asymmetric dihydroxylation of methyl trans-cinnamate in ionic liquids, followed by supercritical CO2 product recovery

In this work, osmium-catalyzed asymmetric dihydroxylation (AD) of methyl trans-cinnamate was studied. Osmium and chiral ligand catalysts were immobilized in ionic liquid only, without any other reaction solvents, while the recovery of the product was performed by extraction with supercritical CO₂, and compared with results obtained by extractions with organic solvents such as hexane and diethyl ether. In supercritical CO₂ extraction experiments, optimal extraction pressure was found and ionic liquid chosen, so that the highest reaction yields coupled with lowest osmium content in the crude product can be achieved. Finally, recycle experiments of the same (ionic liquid + catalytic system) mixture were successfully conducted. Application of ionic liquids and supercritical CO₂ in osmium catalyzed AD allows for the isolation of the diol basically without contamination with osmium, in high yield and enantiomeric excess, and it makes possible the efficient reuse of ionic liquid solvent and the catalytic system.     

Accelerated Solvent‐ and Catalyst‐Free Synthesis of 1,2,3‐Triazolium‐Based Poly(Ionic Liquid)s

A straightforward and expeditious monotopic approach for the preparation of 1,2,3‐triazolium‐based poly(ionic liquids) (TPILs) is reported. It is based on the solvent‐ and catalyst‐free polyaddition of an α‐azide‐ω‐alkyne monomer in the presence of methyl iodide or N‐methyl bis[(trifluoromethyl)sulfonyl]imide alkylating agents. Poly(1,2,3‐triazole)s generated in bulk or by thermal azide–alkyne cycloaddition (AAC) are quaternized in‐situ to afford TPILs composed of 1,3,4‐ and 1,3,5‐trisubstituted 1,2,3‐triazolium units. The physical and ion‐conducting properties of the prepared samples are compared with the TPILs composed solely of 1,3,4‐trisubstituted 1,2,3‐triazolium units obtained through a multistep approach involving copper(I)‐catalyzed AAC polyaddition, quaternization of the 1,2,3‐triazole groups, and anion metathesis. TPILs obtained through the monotopic approach display thermal stabilities and ionic conductivities comparable to their pure regioisomeric analogues.

     

Synthesis of spiro bis(1,2,3-triazolium) salts as chiral ionic liquids

Unique chiral spiro ionic liquids based on 1,2,3-triazolium salts were synthesized via an intramolecular double Huisgen reaction. The optical resolution of the liquid precursors and subsequent dialkylations leads to chiral spiro triazolium salts on a gram scale.     

The first Cu(I)-mediated nucleophilic trifluoromethylation reactions using (trifluoromethyl)trimethylsilane in ionic liquids

The new ionic liquids (5a-8a) were used as reaction media for nucleophilic trifluoromethylation reactions of trifluoromethyl(trimethyl)silane with (1) aryl, allyl, benzyl, and alkyl halides in Cu(I)-mediated C-C bond formation reactions, and (2) carbonyl functionalities catalyzed with Ph3P or CsF. In addition, conversion of benzyl bromide as a model compound to benzyl fluoride was examined in using 6a CsF as the fluorinating reagent. The morpholinium-based ionic liquid (6a) stood out as an efficient solvent system comparable to organic solvents and superior to the other new ionic liquids prepared in this work as well as to [bmim]+[PF6]-. Neat reactions of N-methyloxazolidine (1), N-methylmorpholine (2), N-methylimidazole (3) or N-methyltriazole (4) with 2-(2-ethoxyethoxy)ethyl bromide (BrCH2CH2OCH2CH2OCH2CH3, ) or 2-bromoethyl methyl ether (BrCH2CH2OCH3, 10) at 75 or 105 degrees C gave the N-(2-ethoxyethoxy)ethyl- or N-methoxyethyl-substituted oxazolidinium, morpholinium, imidazolium and triazolium quaternary bromides (1a-4a, 1b-4b) which were metathesized with LiN(SO2CF3)2 to form the respective room-temperature liquid bis(trifluoromethanesulfonyl)amides 5a-8a and 5b-8b in high yields with transition or melting points < -78 degrees C as determined by DSC. All of the ionic liquids are thermally stable to > 310 degrees C as determined by thermogravimetric analyses (TGA). Densities range between 1.29 and 1.53 g cm(-3) at 25 degrees C.     

新型PEG双子温控离子液体中的缩醛反应

制备了具备温控功能的新型PEG双子离子液体(IL200, IL400, IL1000), 考察了该离子液体和甲苯形成“高温均相, 低温两相”体系, 对芳香醛与乙二醇缩合反应的影响, 当离子液体3 mL, 甲苯5 mL, 对甲苯磺酸6 mmol, 苯甲醛5 mmol, 乙二醇15 mmol, 反应时间4 h, 温度80 ℃时, 产率达到92%. 该体系对芳香醛与乙二醇缩合反应有广泛的适用性, 且不经任何处理可多次循环使用.     

Functional amino acid ionic liquids as solvent and selector in chiral extraction

Amino acid ionic liquids (AAILs) have received great attention due to their potentials in catalysis and separations. In this work, functional AAILs were used as solvent and selector in chiral liquid–liquid extraction for the first time. The AAILs have shown distinct enantioselectivity in amino acid extraction. Using these functional AAILs as acceptor phase and ethylacetate as donor phase, more L-enantiomer of amino acid was extracted into the ionic liquid phase than that of D-enantiomer. The influencing factors, including AAILs structure, copper ion concentration, organic phase and amino acid concentration, were investigated. We found that the enantioselective enrichment of racemic amino acids was achieved through a chiral ligand-exchange mechanism. The enantioselectivity of single-step extraction was up to enantiomeric excess value of 50.6%. Moreover, the functional AAILs were found to be efficient extraction solvents for amino acids. The logarithm of distribution coefficient for L-Phe was in the range of 3.4–3.6 in the ionic liquid–ethylacetate two-phase system. This liquid–liquid extraction approach may extend the application of ionic liquids in chiral separations.     

Design and synthesis of spiro bis(1,2,3-triazolium) salts as chiral ionic liquids

Room temperature chiral spiro ionic liquids 1 and 2 based on 1,2,3-triazolium salts, were synthesized via an intramolecular double Huisgen reaction. The preparation of the enantiomerically pure spiro triazolium salts was achieved by resolution by HPLC using a chiral stationary phase column and subsequent N-dialkylations of spiro triazoles 6 and 10.     

Comparing π-complexation capabilities of ionic liquids containing silver(I) and copper(I) ions by headspace single drop microextraction in combination with high-performance liquid chromatography

Selective π-complexation capabilities of silver(I) and copper(I) ions can be effectively facilitated in ionic liquids. To understand the effects of environmental factors that influence the π-complexation of these metal ions with analytes, techniques that employ small volumes of ionic liquid that can be readily analyzed are desired. In this study, headspace single drop microextraction coupled with HPLC is used to investigate a diverse set of environmental factors on the metal ion-mediated complexation with aromatic compounds in ionic liquid media. Silver(I) and copper(I) bis[(trifluoromethyl)sulfonyl]imide salts were both studied by dissolving them in the 1-decyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ionic liquid and employing the mixture as extraction media for aromatic compounds. Water and acetonitrile within the sample solution were observed to interfere with the complexation of silver(I) ions and aromatic compounds, while ethylene glycol and triethylene glycol did not. The temperature and extraction times were optimized to fully facilitate the π-complexation capabilities of metal ions in ionic liquid media. Partition coefficients between the sample headspace and metal ion were determined using a three-phase equilibria model. Although no discernable difference in analyte partitioning between the headspace and ionic liquid solvent was observed, analyte partition coefficients to silver(I) ion tended to be greater compared to copper(I) ion.     

Syntheses and characterization of unsymmetric dicationic salts incorporating imidazolium and triazolium functionalities

A series of both imidazolium- and triazolium-based unsymmetric dicationic salts with alkyl and polyfluoroalkyl substituents were prepared and characterized. Most of them can be classified as ionic liquids (MP < 100 degrees C). Key physical properties, such as melting point, thermal stability, density, and solubility in common solvents were determined and were compared with those of the related monocationic imidazolium- or triazolium-based salts. The effects of anions and substituents bonded to the triazolium and imidazolium cations on these properties were examined. 1-(3-Butyl-imidazolium-1-yl)methylene-(4-butyl-1,2,4-triazolium diiodide) (2d), the precursor of 1-(3-butylimidazolium-1-yl)methylene-(4-butyl-1,2,4-triazolium) bi[bis(trifluoromethanesulfonyl)amide] (3d), reacted with Pd(OAc)(2) at 120 degrees C to generate a binuclear palladium(II) dicarbene complex. The palladium(II) complex was characterized by single-crystal X-ray diffraction analysis and was used as a catalyst precursor for palladium-catalyzed Heck cross-coupling reactions in 3d. Preliminary results show that 3d could serve as both the solvent and catalyst support in the catalytic reactions.     

Ionic liquids incorporating camphorsulfonamide units for the Ti-promoted asymmetric diethylzinc addition to benzaldehyde

New hydrophobic ionic liquids containing chiral camphorsulfonamide units were used as chiral auxiliaries in the titanium catalyzed asymmetric diethylzinc addition to benzaldehyde. The ionic catalyst system shows catalytic properties similar to those of related nonionic counterparts in terms of activity and enantioselectivity. Interestingly, the ionic ligands can easily be recycled and re-used without loss of activity or selectivity.     

Chiral Triazolium Salts and Ionic Liquids: From the Molecular Design Vectors to Their Physical Properties through Specific Supramolecular Interactions

An exhaustive experimental study based on X‐ray diffraction analysis, NMR, FTIR‐ATR (attenuated total reflection), and Raman spectroscopy as well as theoretical calculations is reported in order to understand how the non‐covalent intermolecular contacts are fundamental to explain structure–property relationships and allowing us to correlate a basic macroscopic property (i.e., the melting point, T_m) with the structural variables of a family of enantiopure 1,4‐dialkyl‐1,2,4‐triazolium salts. The effect of different structural vectors such as the ring size, the spatial disposition of the substituent, the substitution on the oxygen atom, the nature of the anion, or the N4 alkylation of the triazole on the intermolecular interactions of these chiral salts of a well‐defined 3D structure is reported. The non‐covalent intermolecular contacts mainly implicating the triazolium H3 proton are fundamental to explain structure–property relationships and, therefore, the physical properties of these new chiral salts, rather than simple anion–cation interactions. Overall, our findings highlight the importance of the specific supramolecular interactions for the understanding of the physical properties of triazolium salts and ionic liquids.     

Chemical and thermal stability of N‐heterocyclic ionic liquids in catalytic C–H activation reactions

¹H‐NMR spectrum analyses are applied to study the chemical and thermal stability of selected N‐heterocyclic ionic liquids within the reaction system that can highly efficiently activate a C–H bond of methane and convert it into the C–O bond in methanol. Our results indicate that under such reaction conditions involving using a powerful Pt‐based catalyst and strong acidic solvent, the aromatic ring of an imidazolium cation becomes unstable generating an ammonium ion (NH₄⁺). Our results also suggest that the instability of the imidazolium ring is more chemically (participation in reactions) than thermally based. Modifications of the aromatic ring structure such as pyrazolium and triazolium cations can increase the chemical/thermal stability of ionic liquids under these reaction conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

Enantioselective conjugate addition of dialkylzinc and diphenylzinc to enones catalyzed by a chiral copper(I) binaphthylthiophosphoramide or binaphthylselenophosphoramide ligand system

The enantioselective conjugate addition of dialkylzinc or diphenylzinc to enones was catalyzed by a copper(I)-axially chiral binaphthylthiophosphoramide or binaphthylselenophosphoramide ligand system at room temperature (20 degrees C) or 0 degrees C, affording the Michael adducts in high yields with excellent ee for cyclic and acyclic enones. The enantioselectivity and reaction rate achieved here are one of the best results yet for the Cu-catalyzed conjugate addition to enones. It was revealed that this series of chiral phosphoramides was a novel type of S,N-bidentate ligands on the basis of (31)P NMR and (13)C NMR spectroscopic investigations. The mechanism of this asymmetric conjugate addition system has been investigated as well. We found that the acidic proton of phosphoramide in these chiral ligands play a significant role in the formation of the active species. A bimetallic catalytic process has been proposed on the basis of previous literature. The linear effect of product ee and ligand ee further revealed that the active species is a monomeric Cu(I) complex bearing a single ligand [Cu(I):ligand 1:1].     

Comparison between polyethylenglycol and imidazolium ionic liquids as solvents for developing a homogeneous and reusable palladium catalytic system for the Suzuki and Sonogashira coupling

The carbapalladacycle complex of 4-hydroxyacetophenone oxime is a highly active palladium catalyst to effect the Suzuki coupling of aryl chlorides and other C-C forming reactions in water. In an attempt to develop a reusable, homogeneous system based on this complex, its stability against prolonged heating in different ionic liquids and polyethylenglycol (PEG) has been studied. It was found that the palladium complex decomposes in water, 1-butyl-1-methylimidazolium hexafluorophosphate and 1-butyl-1-methylimidazolium chloride to form palladium nanoparticles in the first two cases and PdCl₄²⁻ in the third case. In contrast, this cyclic palladium complex was stable upon extended heating in 1-butyl-2,3-dimethylimidazolium hexafluorophosphate and in PEG. The activity of this complex for the Suzuki and Sonogashira correlates with the stability of the complex, the activity in PEG being higher than any of the ionic liquids tested. Although the carbapalladacycle complex also decomposes in PEG upon reaction, the resulting Pd nanoparticles (2-5 nm size) are stabilized by PEG acting as ligand. In this way, a reusable, homogeneous system in PEG has been developed that is able to effect the Suzuki and Sonogashira couplings without the need of copper and phosphorous ligands, working at the open air.     

Efficient and Green Microwave-Assisted Multicomponent Biginelli Reaction for the Synthesis of Dihydropyrimidinones Catalyzed by Heteropolyanion-Based Ionic Liquids Under Solvent-Free Conditions

An efficient and green route for the synthesis of dihydropyrimidinones via microwave-assisted Biginelli reaction catalyzed by 3 mol% of heteropolyanion-based ionic liquids under solvent-free conditions has been reported. The practical reaction was found to be compatible with different structurally diverse substrates. Good to excellent yields, short reaction times, and operational simplicity are the main highlights of this protocol. Moreover, the heteropolyanion-based ionic liquids were easily reusable for this Biginelli reaction.     

DABCO-based ionic liquids:Green and efficient catalysts with a dual catalytic role for aza-Michael addition

Four recoverable and reusable ionic liquids based on 1,4-diazobicyclo[2.2.2]octane(DABCO) have been synthesized to catalyze the aza-Michael addition of secondary amines to a,b-unsaturated compounds.Among the catalysts tested,[DABCO-PDO][OAc] was found to be most suitable for the reaction of a wide range of cyclic substrates without any solvent at room temperature,and afford the products in good to excellent yields within an appropriate amount of time.The proposed mechanism for the dual activation of the catalyst was supported by experimental results as well as the DFT calculation.In addition,the ionic liquids used can be regenerated and recycled several times without any loss of activity.     

Copper(I)-Catalyzed Highly Enantioselective [3+3]-Cycloaddition of β-Aryl/Alkyl Vinyl Diazoacetates with Nitrones

β-Aryl/alkyl vinyl diazoacetates were investigated in metallo-vinylcarbene reactions with nitrones, revealing a Rh₂(OAc)₄-catalyzed cyclopropene dimerization reaction and a copper(I) catalyzed [3+3]-cycloaddition of nitrones. The chiral cyclopropyl-In-SaBox ligand with copper(I) catalysis could realize the asymmetric version of the cycloaddition reaction, delivering various 3,6-dihydro-1,2-oxazine derivatives in good yield and with excellent enantioselectivity under mild conditions.