Preparation, structures, and haptotropic rearrangement of novel dinuclear ruthenium complexes, (μ2,η:η-guaiazulene)Ru2(CO)4(CNR)

Novel isonitrile derivatives of a diruthenium carbonyl complex, (μ₂,η³:η⁵-guaiazulene)Ru₂(CO)₅ (2), were synthesized by substitution of a CO ligand by an isonitrile, and were subjected to studies on thermal and photochemical haptotropic interconversion. Treatment of 2 (a 45:55 mixture of two haptotropic isomers, 2-A and 2-B) with RNC at room temperature resulted in coordination of RNC and alternation of the coordination mode of the guaiazulene ligand to form (μ₂,η¹:η⁵-guaiazulene)Ru₂(CO)₅(CNR), 5d–5f, [5d; R=^tBu, 5e; 2,4,6-Me₃C₆H₂, or 5f; 2,6-ⁱPr₂C₆H₃] in moderate to good yields. Thermal dissociation of a CO ligand from 5 at 60 °C resulted in quantitative formation of a desirable isonitrile analogue of 2, (μ₂,η³:η⁵-guaiazulene)Ru₂(CO)₄(CNR), 4d–4f, [4d; R=^tBu, 4e; 2,4,6-Me₃C₆H₂, or 4f; 2,6-ⁱPr₂C₆H₃], as a 1:1 mixture of the two haptotropic isomers. A direct synthetic route from 2 to 4d–4f was alternatively discovered; treatment of 2 with one equivalent of RNC at 60 °C gave 4d–4f in moderate yields. All of the new compounds were characterized by spectroscopy, and structures of 5d (R=^tBu) and 4d-A (R=^tBu) were determined by crystallography. Thermal and photochemical interconversion between the two haptotropic isomers of 4d–4f revealed that the isomer ratios in the thermal equilibrium and in the photostatic state were in the range of 48:52–54:46.     

Mo(CO)3(NCMe)(PPh3)2: Synthesis, X-ray structure and evaluation of its catalytic activity for the homogeneous hydrogenation of olefins and their mixtures

The complex Mo(CO)₃(NCMe)(PPh₃)₂, was synthesized by the reaction of Mo(NCMe)₃(CO)₃ with two equivalents of PPh₃ and characterized by UV–Vis, IR, NMR and X-ray diffraction. This complex was used as a catalyst precursor for the hydrogenation of 1-hexene, styrene, cyclohexene and 2,3-dimethyl-1-butene and their mixtures under moderate conditions in homogeneous media. Under mild reaction conditions (T = 373 K, P = 60 atm), the substrates showed the following reactivity order: styrene > 1-hexene > cyclohexene > 2,3-dimethyl-1-butene. A quaternary equimolar mixture showed a different hydrogenation order: 1-hexene > cyclohexene > styrene > 2,3-dimethyl-1-butene; the presence of dibenzothiophene or mercury does not interfere with the activity of the catalyst.     

Synthesis and derivative chemistry of [Ru2(μ-PPh2) (μ-OH) 2(μ-p-cymene) 2]

The cationic diphenylphosphido-bridged compound [Ru₂(μ-PPh₂)(μ-OH)₂(η⁶-p-cymene)₂][PF₆) (2) has been prepared by reaction of the tri-μ-hydroxo complex [Ru₂(μ-OH)₃(η-p-cymene)₂][PF₆] (1) with diphenylphosphine. Complex 2 eliminates water on reaction with protic acids, incorporating the conjugate base of the added acid as a bridging ligand. Formic acid, acetic acid, phenol, and aniline react with 2 to give the monosubstituted compounds [Ru₂(μ-PPh₂)(μ-OH)(μ-L)(η⁶-p-cymene)₂]PF₆] (L = HCO₂, MeCO₂, OPh, or NHPH), whereas methanol, thiophenol, 1,2-benzenedithiol, hydrochloric acid and isopropanol afford the disubstituted derivatives [Ru₂(μ-PPh₂)(μ-L)₂(η⁶-p-cymene)₂]PF₆] (L = OMe, SPh, S₂C₆H₄, Cl, or H).     

Synthesis, characterization and electrochemical studies of the heterometallic diclusters [{Fe2(μ-CO)(CO)6(μ-PPh2)Au}2(diphosphine)] (diphosphine=dppm, dppip, dppe, dppp)

Treatment of [(ClAu)₂(diphosphine)] {diphosphine=bis(diphenylphosphino)methane (dppm), bis(diphenylphosphino)isopropane (dppip), 1,2-bis(diphenylphosphino)ethane (dppe), 1,3-bis(diphenylphosphino)propane (dppp)} with two equivalents of the anion [Fe₂(μ-CO)(CO)₆(μ-PPh₂)]⁻ in the presence of TlBF₄ gives the new heterometallic diclusters [{Fe₂(μ-CO)(CO)₆(μ-PPh₂)Au}₂(diphosphine)] that have been isolated and characterized. Their ³¹P-NMR spectra show different patterns as a function of the diphosphine ligand. The electrochemical behavior of these compounds has been investigated and compared with that of the mono- [Fe₂(μ-CO)(CO)₆(μ-PPh₂)(μ-AuPPh₃)] and tricluster [{Fe₂(μ-CO)(CO)₆(μ-PPh₂)Au}₃(triphos)] derivatives.     

Synthesis and structural characterization of (μ-H)2RU3(CO)9(μ3-η-C8H12) and (μ-H)RU3(CO)9(μ3-η-C12H19)

The reaction between Ru₃(CO)₁₂ and a cyclic olefin (cis-cyclooctene or trans-cyclododecene) at 100 °C for several hours gives the title compounds (μ-H)₂RU₃(CO)₉(μ₃-η²-C₈H₁₂) (1), and (μ-H)RU₃(CO)₉(μ₃-η³-C₁₂H₁₉) (2), both of which have been characterized by X-ray diffraction studies, IR and NMR spectral measurements and elemental analysis. The prolonged reaction between Ru₃(CO)₁₂ and cis-cyclooctene gives compound HRu₃(CO)₉(C₈H₁₁) (3). Compound 3 has been characterized with IR and NMR spectral analyses. In 1 the cyclooctene ring is linked via a μ₃-η²-alkyne type of bonding to the face of the Ru₃ cluster. It is formally σ-bonded to two of the three Ru atoms and π-bonded to the third Ru. The two hydrides in 1 are bridging Ru---Ru bonds. In 2 the cyclododecene ring is bonded to the Ru₃ face via the μ₃-η³-CCHC linkage. There are two formal σ-bonds from the allyl part to the hydrido-bridged Ru atoms and the η³-allyl linkage to the third Ru atom.     

Complexation and aromatization of α,β-unsaturated cyclic ketones by Ru(H2O)6 and (Bz)Ru(H2O)3: molecular structure of (η-Tosylate)(η-hydroxycyclopentadienyl)Ru and of (η-Tosylate)(η-1,4-dihydroxy-2,3,5,6-tetramethylbenzene)Ru

Ruaq²⁺(OTs)₂ complexes in aqueous solution to unsaturated cyclic ketones. These aromatized on heating to π-arene Ru complexes. Thus, with cyclohexonone the main product was Ru(η⁶-phenol)₂²⁺, 4, along with some Ru(η⁶-phenol)(η⁶-OTs)⁺, 6. Similarly gave cyclopentenone in the presence of various arenes Ru(η⁵-hydroxycyclopentadienyl)(η⁶-arene)⁺. Duruquinone complexed to Ruaq²⁺ as a monoprotanated hydroquinolate in Ru(η⁶-2,3,5,6-tetramethyl-1,4-hydroquinone)(η⁶-OTs), 14. Ru(η⁵-cyclopentadienyl)(η⁶-OTs), 8, and 14 were characterized by single crystal x-ray structure analyses, data see Table 1. Whereas both ligands in 8 are planar, the 1,4-hydroquinone ligand in 14 shows distinct bending of the COH groups.     

Mixed-metal cluster chemistry VI: Phosphine substitution at CpMoIr3(μ-CO)3(CO)8; X-ray crystal structure of CpMoIr3(μ-CO)3(CO)7(PPh3)

Reactions of CpMoIr₃(μ-CO)₃(CO)₈ (1) with stoichiometric amounts of phosphines afford the substitution products CpMoIr₃(μ-CO)₃(CO)_8−x (L)_x (L = PPh₃, x = 1 (2), 2 (3); L = PMe₃, x = 1 (4), 2 (5), 3 (6)) in fair to good yields (23–54%); the yields of both 3 and 6 are increased on reacting 1 with excess phosphine. Products 2–5 are fluxional in solution, with the interconverting isomers resolvable at low temperatures. A structural study of one isomer of 2 reveals that the three edges of an MoIr₂ face of the tetrahedral core are spanned by bridging carbonyls, and that the iridium-bound triphenyiphosphine ligates radially and the molybdenum-bound cyclopentadienyl coordinates axially with respect to this Molr₂ face. Information from this crystal structure, ³¹P NMR data (both solution and solid-state), and results with analogous tungsten—triiridium and tetrairidium clusters have been employed to suggest coordination geometries for the isomeric derivatives.     

The insertion of acetylene into the formal ruthenium-phosphorus bonds of closo-[Ru4(μ4-PPh)2(μ2-CO)(CO)10. Crystal structure of [Ru4(μ4-PPh){μ4-η-P(Ph)CHCH}(μ2-CO)(CO)10]

Treatment of closo-[Ru₄(μ₄-PPh)₂(μ₂-CO)(CO)₁₀] with acetylene under ambient conditions leads to the insertion of the acetylene into the skeletal framework of the cluster and the formation of [Ru₄(μ₄-PPh){μ₄-η³-P(Ph)CHCH}(μ₂-CO)(CO)₁₀], the structure of which has been determined X-ray crystallographically.     

Synthesis and characterisation of the methylene-inserted mixed-chalcogenide compounds Fe2(CO)6(μ-SeCH2Te) and Fe2(CO)6(μ-SCH2Te)

The methylene-bridged, mixed-chalogen compounds Fe₂(CO)₆(μ-SeCH₂Te) (1) and Fe₂(CO)₆(μ-SCH₂Te) (3) have been synthesised from the room temperature reaction of diazomethane with Fe₂(CO)₆(μ-SeTe) and Fe₂(CO)₆(μ-STe), respectively. Compounds 1 and 3 have been characterised by IR, ¹H, ¹³C, ⁷⁷Se and ¹²⁵Te NMR spectroscopy. The structure of 1 has been elucidated by X-ray crystallography. The crystalsare monoclinic,space group P2₁/n, A = 6.695(2), B = 13.993(5), C = 14.007(4)Å, β = 103.03(2)°, V = 1278(7) ų, Z = 4, D_c = 2.599 g cm⁻³ and R = 0.030 (R_w = 0.047).     

Syntheses, structure characterisation and X-ray studies of some mono, di- and tri-substituted cluster complexes of Ru3(CO)12 substituted by bulky fluorinated phosphine ligands

Five trinuclear substituted complexes of the type Ru₃(CO)₁₁L, Ru₃(CO)₁₀L₂ and Ru₃(CO)₉L₃ were synthesised by the reaction of Ru₃(CO)₁₂ with fluorine substituted phosphine ligands, {P(C₆H₄F-m)₃ and P(C₆H₄F-p)₃}, using the radical anion catalysed method. The structures of the resulting clusters were elucidated by means of elemental analyses and spectroscopic methods, which included IR, ¹H, ¹³C and ³¹P NMR spectroscopy. X-ray crystallographic studies of four of the complexes were carried out. In all the complexes, the ligand occupies an equatorial position due to steric reasons, and coordination of the ligand is observed only at the phosphorus atom. In the two monosubstituted complexes, Ru₃(CO)₁₁P(C₆H₄F-m)₃ and Ru₃(CO)₁₁P(C₆H₄F-p)₃, the effect of substitution resulted in an increase in the Ru-Ru distances. Out of the three Ru-Ru bonds, the one which is cis to the ligand is noticeably longer than the other two. The asymmetric unit of the disubstituted complex Ru₃(CO)₁₀{P(C₆H₄F-p)₃}₂ is composed of two molecules, A and B. As expected, the two phosphorus ligands are equatorially bonded to two different ruthenium atoms. The asymmetric unit of the trisubstituted complex is composed of one molecule of Ru₃(CO)₉{P(C₆H₄F-m)₃}₃ and one disordered solvent molecule. The structure consists of one triangular ruthenium complex in which each of the phosphorus ligands is equatorially bonded to three different ruthenium atoms. In the structure, disorder of the fluorine atoms is observed. Bond parameters, especially bond lengths and bond angles, are correlated to the structure and also are compared with the literature data of similar compounds.     

Tetrakis(triphenylphosphine oxide) complexes of the lanthanide nitrates; synthesis, characterisation and crystal structures of [La(Ph3PO)4(NO3)3]·Me2CO and [Lu(Ph3PO)4(NO3)2]NO3

The reaction of Ln(NO₃)₃·6H₂O (Ln=La, Ce, Pr or Nd) with a sixfold excess of Ph₃PO in acetone formed [Ln(Ph₃PO)₄(NO₃)₃]·Me₂CO. The crystal structure of the La complex shows a nine-coordinate metal centre with four phosphine oxides, two bidentate and one monodentate nitrate groups, and PXRD studies show the same structure is present in the other three complexes. In CH₂Cl₂ or Me₂CO solutions, ³¹P NMR studies show that the complexes are essentially completely decomposed into [Ln(Ph₃PO)₃(NO₃)₃] and Ph₃PO. Similar reactions in ethanol gave [Ln(Ph₃PO)₃(NO₃)₃] only. In contrast for Ln=Sm, Eu or Gd, only the [Ln(Ph₃PO)₃(NO₃)₃] are formed from either acetone or ethanol solutions. For the later lanthanides Ln=Tb–Lu, acetone solutions of Ln(NO₃)₃·6H₂O and Ph₃PO gave [Ln(Ph₃PO)₃(NO₃)₃] only, even with a large excess of Ph₃PO, but from cold ethanol [Ln(Ph₃PO)₄(NO₃)₂]NO₃ (Ln=Tb, Ho–Lu) were obtained. The structure of [Lu(Ph₃PO)₄(NO₃)₂]NO₃ shows an eight-coordinate metal centre with four phosphine oxides and two bidentate nitrate groups. In solution in CH₂Cl₂ or Me₂CO the tetrakis-complexes show varying amounts of decomposition into mixtures of [Ln(Ph₃PO)₃(NO₃)₃], [Ln(Ph₃PO)₄(NO₃)₂]NO₃ and Ph₃PO as judged by ³¹P{¹H} NMR spectroscopy. The [Ln(Ph₃PO)₃(NO₃)₃] also partially decompose in solution for Ln=Dy–Lu, forming some tetrakis(phosphine oxide) species.     

Interaction of half-sandwich alkylmolybdenum(III) complexes with B(C6F5)3. The X-ray structure of [CpMo(η-C4H6)(μ-Cl)(μ-CH2)(O)MoCp][CH3B(C6F5)3]

The reactions of the half-sandwich molybdenum(III) complexes CpMo(η⁴-C₄H₄R₂)(CH₃)₂, where Cp=η⁵-C₅H₅ and R=H or CH₃, with equimolar amounts of B(C₆F₅)₃ have been investigated in toluene. EPR monitoring shows the formation of an addition product which does not readily react with Lewis bases such as ethylene, pyridine, or PMe₃. The analysis of the EPR properties and the X-ray structure of a decomposition product obtained from dichloromethane, [CpMo(η⁴-C₄H₆)(μ-Cl)(μ-CH₂)(O)MoCp][CH₃B(C₆F₅)₃], indicate that the borane attack has occurred at the methyl position.     

Mixed-metal cluster chemistry Part 20. Syntheses, crystal structures and electrochemical studies of W2Ir2(μ-L)(CO)8(η-C5H4Me)2 (L=dppe, dppf)

The 60-electron tetrahedral clusters W₂Ir₂(μ-L)(CO)₈(η⁵-C₅H₄Me)₂ [L=dppe (2), dppf (3)] have been prepared from reaction between W₂Ir₂(CO)₁₀(η⁵-C₅H₄Me)₂ (1) and the corresponding diphosphine in 52 and 66% yields, respectively. A structural study of 2 reveals that three edges of a WIr₂ face are spanned by bridging carbonyls, that the iridium-ligated diphosphine coordinates diaxially and that the tungsten-bound methylcyclopentadienyls coordinate axially and apically with respect to the plane of bridging carbonyls. A structural study of 3 reveals that the dppf ligand bridges an Ir---Ir bond which is also spanned by a bridging carbonyl; tungsten-ligated methylcyclopentadienyl ligands and terminal carbonyls result in electronic asymmetry (17e and 19e iridium atoms) in the electron-precise cluster. Both clusters show two reversible one-electron oxidation processes and an irreversible two-electron reduction; the dppf-containing cluster 3 has a further, irreversible, one-electron oxidation process. UV–vis-NIR spectroelectrochemical studies of the 2→2⁺→2²⁺ progression reveal the appearance of a low-energy transition on oxidation to 2⁺ which persists on further oxidation to 2²⁺.     

The reaction of (μ-H)2Os3(CO)9(PPh3) with ethylene affords the ethylidene complex (μ-H)2Os3(CO)9(PPh3)(μ-CHCH3)

The product isolated from the reaction of (μ-H)₂Os₃(CO)₉(PPh₃) with ethylene is shown to be the ethylidene complex (μ-H)₂Os₃(CO)₉(PPh₃)(μ-CHCH₃) (1) rather than the ethylene complex (μ-H)(H)Os₃(CO)₉(PPh₃)(C₂H₄), as previously claimed. The characterization of 1 is based on a combination of ¹H and ¹³C NMR results. The ¹H NMR data (δ 6.84 (1 H_D), 2.53 (3 H_C), J(CD) = 7.4 Hz) establish the presence of the ethylidene moiety, whereas detailed analysis of the 1-D and 2-D ¹³C NMR spectra of ¹³CO-enriched 1 indicates the relative positions of the ethylidene, hydride, and phosphine ligands on the triosmium framework.     

Reactions of the cationic diruthenium carbonyl complex [Ru2(μ-dppm)2(CO)4(μ,η-O2CMe)] with bidentate ligands; intramolecularly assisted stereospecific synthesis via the second-sphere face-to-face π–π stacking interactions

The reactions of the diruthenium carbonyl complexes [Ru₂(μ-dppm)₂(CO)₄(μ,η²-O₂CMe)]X (X=BF₄⁻ (1a) or PF₆⁻ (1b)) with neutral or anionic bidentate ligands (L,L) afford a series of the diruthenium bridging carbonyl complexes [Ru₂(μ-dppm)₂(μ-CO)₂(η²-(L,L))₂]X_n ((L,L)=acetate (O₂CMe), 2,2′-bipyridine (bpy), acetylacetonate (acac), 8-quinolinolate (quin); n=0, 1, 2). Apparently with coordination of the bidentate ligands, the bound acetate ligand of [Ru₂(μ-dppm)₂(CO)₄(μ,η²-O₂CMe)]⁺ either migrates within the same complex or into a different one, or is simply replaced. The reaction of [Ru₂(μ-dppm)₂(CO)₄(μ,η²-O₂CMe)]⁺ (1) with 2,2′-bipyridine produces [Ru₂(μ-dppm)₂(μ-CO)₂(η²-O₂CMe)₂] (2), [Ru₂(μ-dppm)₂(μ-CO)₂(η²-O₂CMe)(η²-bpy)]⁺ (3), and [Ru₂(μ-dppm)₂(μ-CO)₂(η²-bpy)₂]²⁺ (4). Alternatively compound 2 can be prepared from the reaction of 1a with MeCO₂H–Et₃N, while compound 4 can be obtained from the reaction of 3 with bpy. The reaction of 1b with acetylacetone–Et₃N produces [Ru₂(μ-dppm)₂(μ-CO)₂(η²-O₂CMe)(η²-acac)] (5) and [Ru₂(μ-dppm)₂(μ-CO)₂(η²-acac)₂] (6). Compound 2 can also react with acetylacetone–Et₃N to produce 6. Surprisingly [Ru₂(μ-dppm)₂(μ-CO)₂(η²-quin)₂] (7) was obtained stereospecifically as the only one product from the reaction of 1b with 8-quinolinol–Et₃N. The structure of 7 has been established by X-ray crystallography and found to adopt a cis geometry. Further, the stereospecific reaction is probably caused by the second-sphere π–π face-to-face stacking interactions between the phenyl rings of dppm and the electron-deficient six-membered ring moiety of the bound quinolinate (i.e. the N-included six-membered ring) in 7. The presence of such interactions is indeed supported by an observed charge-transfer band in a UV–vis spectrum.     

Synthesis of [(μ-RS)(μ-S){Fe2(CO)6}2(μ4-S)] and their reactivity toward electrophiles

Reaction of the Et₃NH⁺ salts of the [(μ-RS)(μ-CO)Fe₂(CO)₆]⁻ anions (R=Bu^t, Ph or PhCH₂) with (μ-S₂)Fe₂(CO)₆ gives reactive intermediates [(μ-RS)(μ-S){Fe₂(CO)₆}₂(μ₄-S)]⁻. Reactions of the latter with alkyl halides, acid chlorides and Cp(CO)₂FeI have been studied. X-Ray structure of (μ-Bu^tS)(μ-PhCH₂S)[Fe₂(CO)₆]₂(μ₄-S) was determined.     

The reactions between [RuHCl(CO)(PPh3)3] and quinoline carboxylic acids

The reactions of [RuHCl(CO)(PPh₃)₃] with 8-hydroxy-2-methyl-quinoline-7-carboxylic acid and quinoline-2-carboxylic acid have been examined, and two novel ruthenium(II) complexes – [(PPh₃)₂RuH(CO)(C₁₀H₈NO₃)] and [(PPh₃)₂RuCl(CO)(C₉H₆O₂)] – have been obtained. The compounds have been studied by IR and UV–Vis spectroscopy, and X-ray crystallography. The molecular orbital diagrams of the complexes have been calculated with the density functional theory (DFT) method. The spin-allowed singlet–singlet electronic transitions of the compounds have been calculated with the time-dependent DFT method, and the UV–Vis spectra of the compounds have been discussed on this basis.     

A novel arene bonding mode in the mixed-metal cluster Os4Ru(μ-H) 3(CO) 12(μ3-η-C6H5) P(OMe)3

The ionic coupling of [Os₄H₂(CO)₁₂]²⁻ with [Ru(η⁶-C₆H₆)(MeCN)₃]²⁺ affords the neutral mixed metal cluster Os₄Ru(μH)₂(CO)₁₂(η⁶-C₆H₆) 1. The reaction of 1 with trimethylphosphite leads to the initial formation of the addition product Os₄Ru(μH)₂(CO)₁₂(η⁶-C₆H₆)P(OMe)₃ 2, but this complex rearranges in solution to give Os₄Ru(μ-H)₃(CO)₁₂(μ₃-η⁶-C₆H₅)P(OMe)₃ 3. An X-ray structure of 3 shows that the metal core of the cluster is a ruthenium-spiked Os₄ tetrahedron, with one hydrogen atom from the arene having transferred to the Os₄ core, and one arene carbon bridging an Os-Os edge, while the ring as a whole remains η⁶-bound to the Ru atom.