Microcoated wire sensors for the determination of anticancer drugs cyclophosphamide and ifosphamide in the presence of their degradates

The construction and electrochemical response characteristics of poly (vinyl chloride) and poly (vinyl chloride) carboxylate membrane sensors for the determination of cyclophosphamide and ifosphamide are described. Based on the formation of an ion-pair complex between the drug cation and sodium tetraphenylborate, two poly (vinyl chloride) sensors, namely a cyclophosphamide membrane sensor and ifosphamide membrane sensor were fabricated. They show a linear response for both drugs over the concentration range 10⁻²–10⁻⁴ M with cationic slopes of 56 and 54.6 mV per concentration decade, for sensor 1 and sensor 2, respectively. Based on the interaction between the drug solution and the dissociated COOH groups in the poly (vinyl chloride) carboxylate, sensor 3 was fabricated. It shows a linear response for both drugs over the concentration range 10⁻³–10⁻⁵ M with a cationic slope of 49.7 mV per concentration decade. The direct potentiometric determination of cyclophosphamide and ifosphamide in their pharmaceutical preparations using the proposed sensors gave average recoveries of 101.3±0.6, 100.8±10.7 and 102.0±11.0% for the sensors 1, 2 and 3, respectively, which compares reasonably well with the data obtained using the British Pharmacopoeial method (1993). Sensors 1 and 2 were also used to follow up the stability of the drugs studied in the presence of their degradates. These degradation products have no diverse effect on the responses of sensors 1 and 2.     

Amperometric biosensors based on the immobilization of oxidases in a Prussian blue film by electrochemical codeposition

Prussian blue has been formed by cyclic voltammetry onto the basal pyrolytic graphite surface to prepare a chemically modified electrode which provides excellent electrocatalysis for both oxidation and reduction of hydrogen peroxide. It is found for the first time that glucose oxidase or -amino oxidase can be incorporated into a Prussian blue film during its electrochemical growth process. Two amperometric biosensors were fabricated by electrochemical codeposition, and the resulting sensors were protected by coverage with a thin film of Nafion. The influence of various experimental conditions was examined for optimum analytical performance. The glucose sensor responds rapidly to substrates with a detection limit of 2 × 10⁻⁶ M and a linear concentration range of 0.01–3 mM. There was no interference from 2 mM ascorbic acid or uric acid. Another ( -amino acid) sensor gave a detection limit of 3 × 10⁻⁵ M -alanine, injected with a linear concentration range of 7.0 × 10⁻⁵-1.4 × 10⁻² M. Glucose and -amino acid sensors remain relatively stable for 20 and 15 days, respectively. There is no obvious interference from anion electroactive species due to a low operating potential and excellent permselectivity of Nafion.     

Selective piezoelectric odor sensors using molecularly imprinted polymers

Molecular imprinting technique has been used to create sensors with a predetermined selectivity for molecules in the gas phase. Piezoelectric quartz crystals coated with a 2-methylisoborneol (MIB) imprinted polymer gave responses which were consistently 5–10 Hz (1.1–1.3 times) higher than those of sensors coated with a non-imprinted polymer. Geosmin, another tertiary alcohol odorant with an earthy odor resembling, and often accompanying MIB, produced almost equal responses on either imprinted- or non-imprinted sensors. A number of other odorants were examined and their responses to the non-imprinted sensors were found to be similar to or greater than their responses to the imprinted sensors. The responses of MIB to the imprinted sensors were always the highest, while other odorants produced equal or higher responses using the non-imprinted sensor. The sensor has a detection limit of ca. 5 mg l⁻¹ and a dynamic range of at least 1000 mg l^−l. When the time taken for the sensor to stabilize is used as the response, instead of the frequency change, the detection limit is lowered to ca. 200 μg l^−l.     

A new Zn(II)-selective potentiometric sensor based on 4-tert-butylcalix[4]arene in PVC matrix

Poly(vinyl chloride) (PVC) based membranes containing 4-tert-butylcalix[4]arene (I) as an electroactive material alongwith anion excluder sodiumtetraphenylborate (NaTPB) and plasticizer tri-butylphosphate (TBP) have been developed to fabricate a new zinc-selective sensor. Out of various compositions, the best performance was exhibited by the membrane having I, NaTPB, TBP and PVC in the ratio 8:5:100:200 (w/w). The sensor works well in the concentration range 9.8 × 10⁻⁶ to 1.0 × 10⁻¹ mol dm⁻³ with a near-Nernstian slope of 28.0 ± 1.0 mV/decade of activity. The detection limit is down to 5.0 × 10⁻⁷ mol dm⁻³. The working pH range of this sensor is 2.5–4.3 and it works well in partially non-aqueous medium up to 15% (v/v) (methanol, ethanol and acetone). It exhibits a fast response time of 30 s and could be used for more than four months without any considerable change in response characteristics. It has excellent selectivity for Zn(II) over other mono-, bi- and trivalent cations which have been reported to cause interference in the working of other sensors. It has been successfully used as an indicator electrode in the potentiometric titration of Zn(II) against EDTA and also to estimate zinc ions in industrial waste waters.     

PVC membrane based potentiometric sensors for uranium determination

Two novel uranyl PVC matrix membrane sensors responsive to uranyl ion are described. The first sensor incorporates tris(2-ethylhexyl)phosphate (TEHP) as both electroactive material and plasticizer and sodium tetraphenylborate (NaTPB) as an ion discriminator. The sensor displays a rapid and linear response for UO₂²⁺ ions over the concentration range 1×10⁻¹–2×10⁻⁵ mol l⁻¹ UO₂²⁺ with a cationic slope of 25.0±0.2 mV decade⁻¹. The working pH range is 2.8–3.6 and the life span is 4 weeks. The second sensor contains O-(1,2-dihydro-2-oxo-1-pyridyl)-N,N,N′,N′-bis(tetra-methylene)uronium hexafluorophosphate (TPTU) as a sensing material, sodium tetraphenylborate as an ion discriminator and dioctyl phenylphosphonate (DOPP) as a plasticizer. Linear and stable response for 1×10⁻¹–5×10⁻⁵ mol l⁻¹ UO₂²⁺ with near-Nernstian slope of 27.5±0.2 mV decade⁻¹ are obtained. The working pH range is 2.5–3.5 and the life span of the sensor is 6 weeks. Interference from many inorganic cations is negligible for both sensors. However, interference caused by some ions (e.g. Th⁴⁺, Cu²⁺, Fe³⁺) is eliminated by a prior ion exchange or solvent extraction step. Direct potentiometric determination of as little as 5 μg ml⁻¹ uranium in aqueous solutions shows an average recovery of 97.2±1.3%. Application for the determination of uranium at levels of 0.01–1 wt.% in naturally occurring and certified ores gives results with good correlation with data obtained by X-ray fluorescence.     

Microbiosensor for acetylcholine and choline based on electropolymerization/sol–gel derived composite membrane

Amperometric enzyme biosensors for the determination of acetylcholine (ACh) and choline (Ch) have been described. For the fabrication of the biosensors, N-acetylaniline (nAN) was first electropolymerized on a Pt electrode surface to be served as a permselective layer to reject interferences. Bovine serum albumin (BSA) and choline oxidase (CHOD) were co-immobilized in a zinc oxide (ZnO) sol–gel membrane on the above modified Pt electrode for a Ch sensor, or CHOD, acetylcholinesterase (AChE) and BSA immobilized together for an ACh/Ch sensor. The poly (N-acetylaniline) (pnAN) film was the first time used for an ACh/Ch sensor and found to have excellent anti-interference ability, and the BSA in the sol–gel can improve the stability and activity of the enzymes. Amperometric detection of ACh and Ch were realized at an applied potential of +0.6 V versus SCE. The resulting sensors were characterized by fast response, expanded linear range and low interference from endogenous electroactive species. Temperature and pH dependence and stability of the sensor were investigated. The optimal ACh/Ch sensor gave a linear response range of 1.0 × 10⁻⁶ to 1.5 × 10⁻³ M to ACh with a detection limit (S/N = 3) of 6.0 × 10⁻⁷ M and a linear response range up to 1.6 × 10⁻³ M to Ch with a detection limit of 5.0 × 10⁻⁷ M. The biosensor demonstrated a 95% response within less than 10 s.     

Selective potentiometric determination of nitrite ion using a novel (4-sulphophenylazo-)1-naphthylamine membrane sensor

A novel polymeric membrane sensor sensitive to (4-sulphophenylazo-)1-naphthylamine (SPAN) based on the use of tris(bathophenanthroline) Ni(II)–SPAN ion pair as an ion exchanger in plasticised PVC membrane is described. The sensor exhibits a linear calibration plot with near-Nernstian anionic slope of −55.0±0.3 mV log[SPAN]⁻¹ over the concentration range 10⁻⁶–10⁻² mol l⁻¹ at pH 7. The sensor shows working range over the pH 6–8, response time of 20 s for 10⁻⁵ mol l⁻¹ and operational lifetime of 8 weeks. The sensor is used for quantification of micro quantities of nitrite ion by a prior conversion into the more lipophilic SPAN ion, which is measured with adequate sensitivity, and high selectivity using SPAN sensor. Validation of the method according to the quality assurance standards shows good performance characteristics. The sensor is satisfactory utilised for potentiometric determination of nitrite ion in wastewater samples and meat products. The results are favourably compared with data obtained using the standard spectrophotometric procedure involving the same reaction.     

Detection of paraoxon by immobilized organophosphorus hydrolase in a Langmuir–Blodgett film

Langmuir–Blodgett (LB) film deposition technique was employed for the immobilization of organophosphorus hydrolase (OPH). OPH enzyme was covalently bonded to a fluorescent probe, fluorescein isothiocyanate (FITC), and used as a biological recognition element. Under optimal experimental conditions, OPH monolayers were deposited onto the surface of silanized quartz slides as LB film and utilized as a bioassay for the detection of paraoxon. Two different methods were employed for detection of paraoxon: the fluorescence quenching of the fluorescence probe (FITC) covalently bonded to OPH and the UV–vis absorption spectrum of the paraoxon hydrolysis product. The UV–vis absorption measurement demonstrated a linear relationship between the absorbance at 400 nm and the concentration of paraoxon solutions over the range of 1.0 × 10⁻⁷–1.0 × 10⁻⁵ M (0.27–27 ppm). By observing the FITC fluorescence quenching, the concentration of paraoxon can be detected as low as 10⁻⁹ M (S/N = 3). The research described herein showed that the LB film bioassay had high sensitivity, rapid response time and good reproducibility.     

Simultaneous flow injection determination of calcium and fluoride in natural and borehole water with conventional ion-selective electrodes in series

An on-line automated system for the simultaneous flow injection determination of calcium and fluoride in natural and borehole water with conventional calcium-selective and fluoride-selective membrane electrodes as sensors in series is described. Samples (30 μl) are injected into a TISAB II (pH=5.50) carrier solution as an ionic strength adjustment buffer. The sample-buffer zone formed is first channeled to a fluoride-selective membrane electrode and then via the calcium-selective membrane electrode to the reference electrodes. The system is suitable for the simultaneous on-site monitoring of calcium (linear range 10⁻⁵–10⁻² mol l⁻¹ detection limit 1.94×10⁻⁶ mol l⁻¹ recovery 99.22%, RSD<0.5%) and fluoride (linear range 10⁻⁵–10⁻² mol l⁻¹ detection limit 4.83×10⁻⁶ mol l⁻¹ recovery 98.63%, RSD=0.3%) at a sampling rate of 60 samples h⁻¹.     

Determination of cyanide using flow-injection multisensor system

A flow-injection multisensor system (FIMS) comprising potentiometric sensors of different types for determination of free cyanide activity in basic solutions for extraction of noble metals was developed. The solvent polymeric membrane sensors based on metalloporphyrin and crystalline sensors were combined in the sensor system. The system allowed determination of cyanide activity in the range 10⁻⁴–1 mol l⁻¹ with an error less than 5% in individual cyanide solutions and acceptable precision (about 20%) in process liquids. The system was able to analyse up to 20 samples per h. The FIMS was also applied to detecting of silver ions in the presence of cyanide. Chalcogenide glass sensor was used as the detector that ensured the precision of 20%.     

Pulse radiolysis study of reactions of alkyl and alkylperoxy radicals originating from methyl tert-butyl ether in the gas phase

UV spectra and kinetics for the reactions of alkyl and alkylperoxy radicals from methyl tert-butyl ether (MTBE) were studied in 1 atm of SF₆ by the pulse radiolysis-UV absorption technique. UV spectra for the radical mixtures were quantified from 215 to 340 nm. At 240 nm. σ_R = (2.6 ± 0.4) × 10⁻¹⁸ cm² molecule⁻¹ and σ_RO2 = (4.1 ± 0.6) × 10⁻¹⁸ cm² molecule⁻¹ (base e). The rate constant for the self-reaction of the alkyl radicals is (2.5 ± 1.1) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹. The rate constants for reaction of the alkyl radicals with molecular oxygen and the alkylperoxy radicals with NO and NO₂ are (9.1 ± 1.5) × 10⁻¹³, (4.3 ± 1.6) × 10⁻¹² and (1.2 ± 0.3) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹, respectively. The rate constants given above refer to reaction at the tert-butyl side of the molecule.     

Potentiometric determination of hydrogen peroxide at MnO2-doped carbon paste electrode

A novel hydrogen peroxide (H₂O₂) potentiometric sensor, made with a MnO₂-doped carbon paste electrode (CPE), is reported. Under optimum conditions, the electrode gives a Nernstian response for H₂O₂ in the concentration range 3.00×10⁻⁷–3.63×10⁻⁴ mol/l, with a slope of 21–19.4 mV/pH₂O₂ and a detection limit of 1.2×10⁻⁷mol/l H₂O₂. In addition, this sensor offers some analytical characteristics such as sensitivity, good reproducibility and a simple preparation procedure. The effects of both the components of the electrode and other conditions on the potential response of the sensor, as well as the possible response mechanism, are discussed.     

Albumin and fibrinogen adsorption onto phosphatidylcholine monolayers investigated by Fourier transform infrared spectroscopy

Dipalmitoylphosphatidylcholine (DPPC) monolayers were deposited onto a germanium attenuated total reflectance (ATR) crystal using the Langmuir–Blodgett technique. The DPPC-coated crystal was then exposed to human serum albumin or human fibrinogen solutions while measuring the protein adsorption by recording FTIR spectra. The effect of the zwitterionic nature of the DPPC polar headgroup towards protein adsorption has been ascertained by exposing either the phospholipid headgroup or the acyl chains to the protein solution; this was possible by the use of a silanized or a bare germanium crystal. Calibration curves have been made to measure the protein surface concentrations. After 3 h, the albumin surface concentration on DPPC monolayers was about three times higher when the proteins were exposed to the lipid acyl chains instead of the polar headgroups (e.g. 3 vs. 1 μg cm⁻²). As for fibrinogen (FGN) adsorption, when the lipid polar headgroups were exposed to the protein solution, the FGN adsorption was low reaching a maximum value of 0.5 μg cm⁻². When interacting with the lipid acyl chains, the FGN adsorption reached a plateau at a value of 2.1 μg cm⁻² after 3 h. Clearly, both albumin and FGN showed a low tendency to adsorb on surfaces where the lipid polar headgroups are exposed toward the protein solution.     

Ni selective sensors based on meso-tetrakis-{4-[tris-(4-allyl dimethylsilyl-phenyl)-silyl]-phenyl}porphyrin and (sal)2trien in poly(vinyl chloride) matrix

PVC-based membranes of meso-tetrakis-{4-[tris-(4-allyl dimethylsilyl-phenyl)-silyl]-phenyl}porphyrin (I) and (sal)₂trien (II) as electroactive material with dioctylphthalate (DOP), tri-n-butylphosphate (TBP), chloronapthalene (CN), dibutylphthalate (DBP) and dibutyl(butyl) phosphonate (DBBP) as plasticising solvent mediators have been found to act as Ni²⁺ selective sensor. The best performance was obtained with the sensor having a membrane of composition of I: sodium tetraphenyl borate: PVC in the ratio 5:5:150. The sensor exhibits Nernstian response in the activity range 2.5 × 10⁻⁶ to 1.0 × 10⁻¹ M, performs satisfactorily over wide pH range (2–5.5) with a fast response time (8 s). The sensor was found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol or ethanol and acetone and could be used over a period of 4 months. Potentiometric selectivity coefficients determined by matched potential method (MPM) indicate excellent selectivity for Ni²⁺ ions. The sensors could be used successfully in the estimation of nickel in different brand of chocolates and also as an indicator electrode in potentiometric titration.     

A selective optical sensor for picric acid assay based on photopolymerization of 3-(N-methacryloyl) amino-9-ethylcarbazole

A novel optical sensor based on covalent immobilization for picric acid assay has been described. To improve the stability of the sensor, a terminal double bond was attached to the fluorescent compound, 3-amino-9-ethylcarbazole (AEC), via methacryloyl chloride. The resultant compound, 3-(N-methacryloyl) amino-9-ethylcarbazole (MAEC) was copolymerized with 2-hydroxypropyl methacrylate on surface-modified quartz glass plates by UV irradiation. The resulting optical sensor (optode membrane) was used to determine picric acid based on fluorescence quenching. It shows a linear response toward picric acid in the concentration range of 9.33 × 10⁻⁸ to 9.33 × 10⁻⁵ mol l⁻¹, with rapid response, high stability and good selectivity to picric acid.     

Piezoelectric Crystal Membrane Chemical Sensors Based on Fullerene and Macrocyclic Polyethers

Various reusable and sensitive piezoelectric (PZ) quartz crystal membrane sensors with home‐made computer interfaces for signal acquisition and data processing were developed to detect organic/inorganic vapors and organic/inorganic/biologic species in solutions, respectively. Fullerene(C60), fullerene derivatives and artificial macrocyclic polyethers, e.g., crown ethers and cryptands, were synthesized and applied as coating materials on quartz crystals of the PZ crystal sensors. The oscillating frequency of the quartz crystal decreased due to the adsorption of organic or inorganic species onto coating material molecules on the crystal surface. The crown ether‐coated PZ crystal gas detector exhibited high sensitivity with a frequency shift range of 10–340 Hz/(mg/L) for polar organic gases, a short response time (< 2.0 min.), good selectivity, and good reproducibility. The Ag(I)/crptand22 and Ru(III) / crptand22 coated PZ gas detectors were also prepared for nonpolar organic vapors, e.g., alkynes and alkenes. The frequency shifts of the nonpolar PZ sensors were in the order: alkynes > alkenes > alkanes. A Ti(IV)/Cryptand22‐coated PZ crystal sensor was also developed to detect the inorganic air pollutants, e.g., CO and NO₂. A piezoelectric gas sensor for both polar/nonpolar organic vapors based on C60‐cryptand22 was also prepared. The cryptand22‐coated PZ gas sensor was also employed as a GC detector for organic molecules. The cryptand22‐coated piezoelectric GC detectors compared well with the commercial thermal conductivity detector (TCD). The interaction between fullerene C60 and organic molecules was studied with a fullerene coated PZ gas detector. A multi‐channel PZ organic gas detector with PCA(Principal Component Analysis) and BPN (Back Propagation Neural) analysis methods was developed. Various liquid piezoelectric crystal sensors based on long‐chain macrocyclic polyethers, e.g., C₁₀H₂₁‐dibenzo‐16‐crown‐5, C₁₈H₃₇‐benzo‐15‐crown‐5, (C₁₇CO)₂‐cyptand22 and fullerene derivatives, e.g., C60‐NH‐cryptand22 and dibenzo‐16‐crown‐5‐C60, were also developed as HPLC detectors for metal ions, anions, and various organic compounds in solutions. The sensitive and highly selective PZ bio‐sensors based on enzymes, polyvinylaldehyde, polycinnaldehyde‐C60 and C60‐cryptand22 were developed to detect various biologic species, e.g., proteins, glucose, and urea. A quite sensitive EQCM (Electrochemical Quartz Crystal Micro‐balance) detection system was also developed for detection of trace heavy metal ions.     

Novel PVC-based membrane sensors selective for vanadyl ions

Poly(vinyl chloride) based membranes of di-(2-ethylhexyl)phosphoric acid (DEHPA) and dibutyl(butyl)phosphonate (DBBP) have been prepared and investigated as VO²⁺-selective sensors. The membranes containing DEHPA/DBBP and sodium tetraphenylborate, an anion excluder, show near-Nernstian/Nernstian response in the concentration range 10⁻⁵–10⁻¹ M. The sensors exhibit a fast response time and good selectivity for VO²⁺ over a number of other cations. Quantitative determination of vanadium in waste V₂O₅ catalyst has been achieved by these sensors and they have also been used as indicator electrodes for the determination of the end point in the potentiometric titration of VO²⁺ against EDTA.     

An iron(III) ion-selective sensor based on a μ-bis(tridentate) ligand

A μ-bis(tridentate) ligand named 2-phenyl-1,3-bis[3′-aza-4′-(2′-hydroxyphenyl)-prop-4-en-1′-yl]-1,3-imidazolidine (I) has been synthesized and scrutinized to develop iron(III)-selective sensors. The addition of sodium tetraphenyl borate and various plasticizers, viz., chloronaphthalene, dioctylphthalate, o-nitrophenyl octyl ether and dibutylphthalate has been used to substantially improve the performance of the sensors. The membranes of various compositions of the ligand were investigated and it was found that the best performance was obtained for the membrane of composition (I) (10 mg):PVC (150 mg):chloronaphthalene (200 mg):sodium tetraphenyl borate (9 mg). The sensor showed a linear potential response to iron(III) over wide concentration range 6.3 × 10⁻⁶ to 1.0 × 10⁻¹ M (detection limit 5.0 × 10⁻⁶ M) with Nernstian slope (20.0 mV/decade of activity) between pH 3.5 and 5.5 with a quick response time of 15 s. The potentiometric selectivity coefficient values as determined by match potential method (MPM) indicate excellent selectivity for Fe³⁺ ions over interfering cations. The sensor exhibits adequate life of 2 months with good reproducibility. The sensor could be used in direct potentiometry.     

Selectivity control in the non-aqueous capillary electrophoretic separation of amino acids

The separation of dansylated amino acids and underivatized amino acids in non-aqueous electrolytes was evaluated with direct and indirect UV detection. Different migration orders were achieved for dansylated amino acids in methanol compared to aqueous electrolyte systems. A reversed migration order was observed for some dansylated amino acids. Separation selectivity was different under acidic and basic conditions and was also a function of the solvation properties of the solvent. Underivatized amino acids were separated in basic and acidic electrolytes in methanol; different separation selectivities and, for some amino acids, a reversed migration order were also observed in these electrolyte systems. Analytical merits of the separation of both derivatized and underivatized amino acids were briefly evaluated; detection limits for dansylated amino acids were in the range of 2·10⁻⁷–4·10⁻⁷ mol/l and, for underivatized amino acids, were 2·10⁻⁶–4·10⁻⁵ mol/l.     

Excimer fluorescence in β-9,10-dichloroanthracene crystals

The fluorescence of single crystals of β-9,10-dichloroanthracene at 4.2 K consists solely of excimer emission (τ = 95 ± 5 ns). The absence of monomenc emission shows that excimer formation in this crystal is not a thermally activated process. This result is confirmed by excimer-excimer annihilation studies (γ(4.2 K) = 6 × 10⁻¹³, γ(298K) = 3 × 10⁻¹² cm³ s⁻¹).