Hydrogen‐bonded supramolecular copolymers were easily prepared by mixing cyclohexanetricarboxamides with three ( 1 ) and six ( 2 ) alkylsilyl groups, and supramolecular fibers were fabricated. When the composition of 1 and 2 was at or close to equimolarity, the supramolecular copolymer chain was found to have an alternating sequence. This was attributed to the fact that the steric factor of the alkylsilyl side chains effectively controls the unit sequence of the supramolecular polymer chain.
Many research groups have explored the properties and solution self‐assembly of main chain metallo‐supramolecular multiblock copolymers. Until recently, these metal complexes have been used to prepare mainly micelle type structures. However, the self‐assembly of such copolymers has been exploited further to create more advanced architectures which utilize the reversible supramolecular linkage of their building blocks as a key component in their synthesis. Furthermore, the incorporation of multiple orthogonal interactions and stimuli responsive polymers into their design, enables more precise external control of their properties. This feature article discusses recent developments and provides an insight into their potential exploitation and development for the creation of novel, smart, and responsive nanostructures.
Self‐assembly of two‐dimensional (2D) structures from functional molecules is of great scientific importance. Herein, using a typical linear conducting polymer, polyaniline as building blocks, 2D single crystalline microplates are successively produced. The structure of 2D microplates is clearly defined by selected area electron diffraction, X‐ray diffraction, and Raman spectroscopy. Owing to the anisotropic arrangement of linear conjugated PANI molecules, the microplate shows a typical anisotropic electrical transport property.
Stimuli‐responsive polymers are the subject of intense research because they are able to show responses to various environmental changes. Among those stimuli, light has attracted much attention since it can be localized in time and space and it can also be triggered from outside of the system. In this paper, we review light‐responsive block copolymers (LRBCs) that combine characteristic features of block copolymers, e.g., self‐assembly behavior, and light‐responsive systems. The different photo‐responsive moieties that have been incorporated so far in block copolymers as well as the proposed applications are discussed.
A novel approach to load a hydrophilic bovine serum albumin into drug carriers was proposed in terms of temperature‐programmed “shell‐in‐shell” structures, which were fabricated with poly(N‐isopropylacrylamide), poly(lactide), poly(ethylene glycol), and Au nanoparticles. Spherically well‐defined “shell‐in‐shell” structures were constructed by a modified‐double‐emulsion method (MDEM). The lower critical solubility temperature of the structures was manipulated to 36.4 °C which was confirmed by UV/Vis spectroscopy and DSC (Differential Scanning Calorimetry).
TEM image of the Au@PLLA‐PEG@PNIPAAm‐PDLA structure. 相似文献
Summary: A novel method, situ polymerization stringed assembly (SPSA), is proposed to prepare stable solid or hollow supramolecular polymer particles, which are assembled by numerous nanoparticles. By this method, the fabrication of primary nanoparticles (poly(methyl methacrylate), PMMA), the linkers (polyvinylpyrrolidone, PVP, chains) between the nanoparticles, and the final assembled solid or hollow particles could be achieved in just one‐pot by methyl methacrylate (MMA)/N‐vinylpyrrolidone (NVP) microemulsion polymerization under UV irradiation. The structures of the supramolecular particles can be changed from solid to hollow by tuning the mass ratio of MMA/NVP in the microemulsion. AFM, TEM, and SEM experiments are performed to identify the results.
AFM image of the PMMA/PVP solid particles obtained from the photopolymerization of the microemulsion containing 20 wt.‐% MMA, 10 wt.‐% NVP, and 5 × 10−2 wt.‐% BP. 相似文献
We report for the first time the preparation of single polypyrrole (PPy) molecule chains using a “metal‐organic framework” with 1 nm channels as a template. The obtained one‐dimensional (1‐D) PPy has highly structure order and excellent conductivity, which has improved by as much as five orders of magnitude in comparison with that of 2‐D PPy.
A novel pH‐responsive polymer vesicle obtained by the aqueous self‐assembly of carboxy‐terminated hyperbranched polyesters is reported. The synthesis is very simple, just a one‐step esterification of the commercially available hydroxy‐terminated hyperbranched polyester of Boltorn Hx (x = 20, 30, 40) with succinic anhydride. The vesicle size can be controlled from 200 nm to 10 µm by simply adjusting the solution pH as well as the degrees of branching (or generation).
Metallo‐supramolecular core cross‐linked (CCL) micelles are fabricated from terpyridine‐functionalized double hydrophilic block copolymers, poly(2‐(2‐methoxyethoxy)ethyl methacrylate)‐b‐poly(2‐(diethylamino)ethyl methacrylate‐co‐4′‐(6‐methacryloxyhexyloxy)‐2,2′:6′,2″‐terpyridine) [PMEO2MA‐b‐P(DEA‐co‐TPHMA)] via the formation of bis(terpyridine)ruthenium(II) complexes. These metallo‐supramolecular CCL micelles exhibit not only high structural integrity under different pH values and temperatures in aqueous solution, but multistimuli responsiveness including pH‐responsive cores, thermo‐responsive shells, and reversible dissociation of bis(terpyridine)ruthenium(II) complexes upon addition of competitive metal ion chelator, which allows for precisely controlled release of the encapsulated hydrophobic guest molecules via the combination of different stimuli.
New multifunctional copoly(2‐oxazoline) nanoparticles were prepared for cell studies. The polymer contains double‐bond side chains as potential reaction sites for “thio”‐click reactions as well as a fluorescein label covalently bound to the polymer backbone. Using the nanoprecipitation technique, spherical nanoparticles of 200–800 nm were obtained. Confocal laser scanning microscopy measurements revealed the cellular uptake of the nanoparticles.
A novel kind of supramolecular liquid‐crystalline polymer (SLCP) microparticles was successfully fabricated with an azopyridyl polymer and sebacic acid by combining a simple self‐organized precipitation method with hydrogen bonding interactions. Upon slow evaporation of a mixed solution of a volatile good solvent and a nonvolatile poor one, walnutlike microparticles showing wrinkled surfaces and LC natures were obtained. The diacid might play a crucial role in the formation of SLCP particles. Without addition of the diacid, neither wrinkled surfaces nor LC natures were observed in azopyridyl polymer microparticles. The fabricated SLCP microparticle possessed not only photoresponsive properties (due to azopyridyl groups) but also LC ordering, which might enable them to find advanced applications.
Stable nanoparticle vesicles were for the first time prepared from adamantyl‐ and cyclodextrin (CD)‐modified silica nanoparticles forming host–guest interactions in aqueous solution. Adamantyl‐functionalized nanoparticles were obtained from thiol‐isocyanate reaction of thiol‐modified nanoparticles with 1‐adamantyl isocyanate. The CD modified silica particles were isolated from a reaction of mono‐6‐para‐toluenesulfonyl‐β‐cyclodextrin with the thiol functionalized silica under microwave conditions in basic media. The obtained particles were characterized in respect of agglomeration and self‐assembly behavior in aqueous solution by dynamic light scattering and transmission electron microscopy. The found vesicle structures are exceptionally stable even after evaporation of water. Such inorganic hollow spheres formed through self‐assembly processes may be important for chemical storage and transport. The technique of chemically‐driven assembly is an attractive option to form useful complex structures by tunable agglomeration.
In this communication, β‐cyclodextrin modified quantum dots were used as a water‐soluble “supramolecular” cross‐linker (SCL) because of its surface's supramolecular activity. The guest monomer‐loaded SCL (mSCL) can be used to copolymerize with water‐soluble monomers leading to transparent hybrid supramolecular hydrogels. This simple and versatile method opens new venues for the preparation of hybrid supramolecular hydrogels and the host–guest chemistry of cyclodextrins.
Summary: Three‐dimensional polyaniline (PANI) nanowire networks were synthesized in high yield using a “soft template” self‐assembled with hexadecyltrimethylammonium bromide and oxalic acid. The PANI nanowire networks had diameters from 35–100 nm depending on synthesis conditions and/or procedures. The networks and the “cross‐linking points” were clearly observed by field‐emission scanning electron microscopy and transmission electron microscopy. A possible mechanism for the formation of three‐dimensional PANI nanowire networks is discussed.
FESEM image of PANI with three‐dimensional nanowire networks. 相似文献
Suitably activated, (Cp*){N(tBu)C(Me)N(Et)}ZrMe2 is known to initiate the ‘living’ and isotactic‐selective polymerization of alk‐1‐enes, and it can be used to synthesize block copolymers and stereoblock polymers. We report a full molecular kinetic investigation of propene, but‐1‐ene, and hex‐1‐ene polymerization with a MAO‐activated catalyst system. By combining NMR microstructural polymer analysis with QM modeling of the active species, the complicated regio‐ and stereochemistry of the polyinsertion process, as well as the active chain‐transfer pathways, are investigated. The perspectives and limitations of this catalyst for application in (stereo)block polymerizations are discussed.
Living cationic ring‐opening polymerizations of 2‐ethyl‐2‐oxazoline and purification of the resulting polymers were performed utilizing an automated synthesizer. Eight polymers (500 mg scale) as well as 40 polymers (150 mg scale) were synthesized in parallel to investigate the reproducibility and the living character of the polymerizations. The poly(2‐ethyl‐2‐oxazoline)s obtained such were characterized by means of 1H NMR spectroscopy, MALDI‐TOF mass spectrometry and online gel permeation chromatography.
The single‐polymer form factor is determined for branched polymers using a scaling argument in order to recover the low‐Q Porod exponent characteristic of the overall structure. The high‐Q Porod exponent characterizes the local branching structure. An alternative approach based on a high‐Q expansion contains information about functionality, branch length and branch content. The specific case of a starburst dendrimer for which the form factor is known is discussed. The model predictions are compared to small‐angle neutron scattering data from a dilute solution of dendrimer in D2O.
Hierarchical poly(3‐hexylthiophene)(P3HT)/carbon nanotube (CNT) supramolecular structures were fabricated through a bottom‐up CNT induced P3HT crystallization strategy. P3HT nanowires growing perpendicular from CNT surface have uniform width and height. The density and the length of these nanowires can be controlled by tuning the P3HT/CNT mass ratio. The quasi‐isothermal crystallization process monitored by in situ UV–Vis spectroscopy indicates that CNTs can greatly enhance the P3HT crystallization, and the P3HT nanowire formation follows first‐order kinetics. Such bottom‐up strategy provides a general approach to build 2D functional conductive supramolecular structures that will lead to numerous applications in nanoscale electronics.
Summary: Amphiphilic graft polyphosphazenes (EtTrp/PNIPAm‐PPP) with different mole ratios of hydrophobic groups to hydrophilic segments were synthesized by ring‐opening polymerization and subsequent substitution reactions. The self‐assembly behavior of these graft copolymers was studied in detail by TEM, SEM, CLSM, and AFM. Depending on the copolymer composition and common organic solvent employed in dialysis process, supramolecular aggregates ranging from network, nanospheres, high‐genus particles to macrophage‐like aggregates were produced with graft copolymers.
Synthetic glycopolypeptides have attracted much interest for application in biomedical field as they are structural mimics to the natural glycopeptides or glycoproteins. However, the synthesis methods toward glycopolypeptides are still few or less efficient. Herein, we present a facile route to preparation of glycopolypeptides with highly effective “glycosylation” by click postpolymerization modification. First, an alkyne‐substituted N‐carboxyanhydride (NCA) monomer was synthesized and subsequently polymerized to afford the polypeptide with “clickable” alkyne pendants. The alkyne‐functionalized polypeptide was then “glycosylated” by click reaction of different sugar azides to the alkyne pendants with high efficiency. All the obtained glycopolypeptides were soluble and preferred α‐helix conformation in water. Primary studies on the obtained glycopolypeptides binding with Con A lectin were assessed by turbidimetric assay. The more quantitive studies of the interactions between lectin proteins and the synthetic glycopolypeptides, and the application of these materials as the multivalent ligands are in progress.
