N‐(2‐Hydroxypropyl)methacrylamide (HPMA) copolymer‐linked nitroxides were synthesized as macromolecular contrast agents for MR imaging. Molar relaxivities of HPMA copolymer‐linked nitroxides increased linearly in proportion to the number of nitroxides attached per gram of copolymer. HPMA copolymer‐linked nitroxides with 15, 20 and 30 mol‐% nitroxide exhibited higher relaxivities than gadolinium diethylenetriaminepentaacetic acid (Gd‐DTPA). These results demonstrate the potential of HPMA copolymer‐linked nitroxides as MR contrast agents for solid tumors.
Structure of HPMA copolymer‐linked nitroxides. 相似文献
We report syntheses of phenylene‐, biphenylene‐, and terphenylene‐layered polymers with a xanthene scaffold by the modified Suzuki‐Miyaura coupling reaction. Their optical properties were studied in detail. The polymer end‐capped by nitrobenzene units, which act as fluorescence quenchers, exhibited the photo‐excited energy transfer from the layered oligophenylenes to the terminal units.
Perfectly alternating copolymers can be synthesised by reacting diacrylates with terminal dienes using alternating diene metathesis polycondensation (ALTMET). This novel method is very versatile and allows preparation of diverse structures of polymers, including main‐chain liquid crystalline polymers.
Main‐chain liquid crystalline polymer obtained by ALTMET. 相似文献
A novel approach is employed to produce core–corona nanospheres, which introduces a stereoregular hydrophilic part to an amphiphilic block copolymer. The resultant morphology is reported using isotactic‐poly(methacrylic acid)‐block‐poly(butyl acrylate). Infrared spectroscopy revealed a supramolecular interaction, and X ray diffraction revealed the crystallization of the outer isotactic‐poly(methacrylic acid) part. The nanostructure, which looks like a nanosized ‘grape’, was formed when nanospheres and nanofibers coexisted simultaneously and partially fused.
A simple and direct method for derivatization of solid polysaccharides is presented. The novel methodology is based on the combination of organic acid‐catalyzed esterification or etherification and photochemical thiol‐ene click derivatization of a heterogeneous polysaccharide. The solid cellulose was “organoclick” modified with aryl, alkyl and polyester groups, respectively. The modification allows for a highly modular and metal free surface modification of solid polysaccharides.
Summary: Novel poly(aryl ether sulfone) copolymers containing 2,5‐biphenylpyridine and tetramethyl biphenyl moieties were synthesized by polycondensation of 4‐fluorophenyl sulfone with 2,5‐(4′,4″ dihydroxy biphenyl)pyridine and tetramethyl biphenyl diol. Copolymers with different molecular weights and different monomer compositions were obtained. These copolymers exhibit excellent film‐forming properties, mechanical integrity, and high modulus up to 250 °C, high glass transition temperatures (above 280 °C) as well as high thermal stability up to 400 °C. In addition to the above properties required for PEMFC application, this novel material shows high oxidative stability and acid doping ability, enabling proton conductivity in the range of 10−2 S · cm−1 above 130 °C.
Synthesis of copolymers with high acid uptake and ionic conductivity. 相似文献
The stabilisation of miniemulsions using an in situ generated surfactant is presented. This surfactant, prepared from of a water‐soluble base and an oil‐soluble long chain acid was successfully used to create stable miniemulsions with up to 60 vol.‐% organic phase. It is shown that the creation of a surface active species at the oil–water interface allowed stable miniemulsions to be generated more rapidly than when using conventional surfactant. In addition, polymerised miniemulsions exhibited less secondary nucleation when in situ surfactants were used.
The Michael reaction of chitosan with acrylic acid was carried out successfully, even in water alone as the reaction medium. As a consequence of its good solubility in water, the reaction product, N‐carboxyethylchitosan, showed excellent biodegradable properties with standard activated sludge.
Water‐dispersible PEGylated nanoparticles (NPs) presenting amine‐reactive conjugation sites at their surfaces were synthesized and their ability to react with amines was demonstrated. An amphiphilic block copolymer bearing an N‐succinimidyl ester at its water‐soluble end was synthesized by the consecutive controlled radical polymerization of poly(ethylene glycol) methacrylate and styrene from a functional halide initiator. After purification of the copolymer, NPs of approximately 40 nm were obtained by a self‐assembly process in water. The reactivity of the NPs was evidenced by reacting them with primary amines, including a fluorescent dye. The activated ester remained stable throughout all synthetic steps and a nearly quantitative coupling efficiency was obtained.
Herein we describe a novel and simple conjugated polymer‐fluorescent probe based platform for trypsin detection from protein mixtures in homogeneous solution. This platform takes advantage of specific interaction between the probe and the active site of trypsin and the electrostatic interaction between the polymer and the protein to mediate energy transfer between the polymer and the probe. This method does not require any separation steps, which should facilitate high‐throughput protease screening and drug discovery.
Poly(vinyl phenol)‐block‐polystyrene (PVPh‐b‐PS) diblock copolymers are synthesized by sequential anionic polymerization with sec‐butyl lithium as the initiator. The PVPh‐b‐PS diblock copolymer is cast (on a substrate) from several solvent mixtures that contain tetrahydrofuran/toluene ratios of 1:0.1, 1:1, and 1:2. After solvent evaporation the resulting films are characterized by SEM, TEM, and contact angle measurements. A honeycomb structure is fabricated from the vesicle structure at relatively low toluene contents. On the contrary, at relatively higher toluene contents, a micelle structure with porous microspheres is formed, which possesses higher surface roughness and results in film surface superhydrophobicity. The simple method described here that uses common/selective mixed solvents may be easily extended to prepare honeycomb structures and superhydrophobic surfaces simultaneously from a wide variety of block copolymers by carefully controlling the weight composition of the block copolymer and the selective solvent content.
A two‐armed polymer with a crown ether core self‐assembles to produce macroporous films with pores perpendicularly reaching through the film down to the substrate. A possible assembling mechanism is discussed. The pore size can be conveniently adjusted by changing the solution concentration. These through‐hole macroporous films provide a template for fabricating an array of Cu nanoparticle aggregates.
Nonlinear optical vinyl polymers with high glass transition temperature (Tg) were prepared by the functionalization of a fluorinated acrylate‐methyl vinyl isocyanate copolymer. A modified pathway to obtain a thiophene bridged chromophore was worked out. Poled films of the polymers show a fairly high and stable nonlinear optical response, even at elevated temperatures.
The thiophene‐bridged chromophore, based on a substituted dicyanomethylene‐dihydrofuran acceptor, synthesized here. 相似文献
An algorithm is developed for simulating adsorption of tree type block‐branched copolymer chains, of arbitrary architecture, from dilute solutions to solid surfaces. A continuum form of the self‐consistent field (SCF) theory is used. The chain architecture is first represented by a convergent tree‐graph, which is then converted into a special type of the connectivity matrix. This matrix is used for computing the configurational statistics of the chains in the adsorbed layer. The crucial step in the algorithm is to compute the junction (branch point) probability weights. A stepwise procedure for computing these probability weights is described. The capability of the algorithm has been demonstrated using illustrative examples.
Summary: The reaction between octaaminophenyl polyhedral oligomeric silsesquioxane (OAPS) and 2,2′‐(1,3‐phenylene)‐bis(4,5‐dihydro‐oxazoles) (PBO) over different temperature ranges was confirmed by FT‐IR spectroscopy. The OAPS was used to modify benzoxazine (BZ) in the presence of PBO. The novel polybenzoxazine (PBZ)‐PBO/OAPS hybrid nanocomposite was prepared by solvent methods. Dynamic mechanical analyses indicated that the nanocomposites exhibited much higher Tg values than the pristine PBZ and PBZ‐PBO resin, and the storage modulus of the nanocomposites was maintained at higher temperatures, although only a small amount of OAPS was incorporated into the systems. Dynamic thermogravimetric analysis showed that the thermal stability of the hybrid was also improved by the inclusion of OAPS.
DMA of PBZ (a), PBZ‐PBO (b), and PBZ‐PBO/OAPS nanocomposites (c–e). 相似文献
Summary: A novel semi‐interpenetrating polymer network (semi‐IPN) with photomechanical switching ability was developed by a cationic copolymerization of azobenzene‐containing vinyl ethers in a matrix of a linear polycarbonate (PC). The semi‐IPN film showed reversible deformation upon switching the UV irradiation on and off and responded with unprecedented rapidity. The photomechanical effect is attributed to a reversible change between the highly aggregated and dissociated states of the azobenzene groups.
The reversible UV response of the length of the semi‐IPN film at 25 °C. 相似文献
Hydrogen‐bonded supramolecular copolymers were easily prepared by mixing cyclohexanetricarboxamides with three ( 1 ) and six ( 2 ) alkylsilyl groups, and supramolecular fibers were fabricated. When the composition of 1 and 2 was at or close to equimolarity, the supramolecular copolymer chain was found to have an alternating sequence. This was attributed to the fact that the steric factor of the alkylsilyl side chains effectively controls the unit sequence of the supramolecular polymer chain.
Self‐assembly of poly(2‐vinylpyridine)‐block‐poly(ϵ‐caprolactone) (P2VP‐b‐PCL) diblock copolymer in the presence of a selective solvent is investigated by transmission electron microscopy and atomic force microscopy. Addition of water into a P2VP‐b‐PCL solution in N,N‐dimethylformamide at 20 °C produces elongated truncated lozenge shaped single crystals of uniform size and shape in large quantities. The single crystals are composed of PCL single‐crystal layer sandwiched between two P2VP layers tethered on the top and bottom basal surfaces. The formation of the single crystals is found to depend on the temperature. These findings provide a facile approach to the preparation of uniform single crystals in large quantities.
Summary: Fabrication of honeycomb‐patterned films from amphiphilic dendronized block copolymer (PEO113‐b‐PDMA82) by ‘on‐solid surface spreading’ and ‘on‐water spreading’ method is reported. Highly ordered honeycomb films with quasi‐horizontally paralleled double‐layered structure can be fabricated by the on‐solid surface spreading method. This work raises the possibility that such structures can be formed in amphiphilic dendronized block copolymers and extends the family of source materials.
