A new approach toward the grafting of norborn‐2‐ene derivatives onto ROMP‐based monolithic supports has been developed. Grafting yields were governed by three variables, which are the catalyst, temperature and the crosslinker used. Three different catalysts, three grafting temperatures, as well as two different crosslinkers were investigated. By optimizing all variables 4‐fold amounts of grafted monomers compared to previously reported procedures were obtained reaching values of 1.04 mmol of monomer/g monolith.
Grafted monolithic supports applying the method reported here. 相似文献
A novel pH‐responsive polymer vesicle obtained by the aqueous self‐assembly of carboxy‐terminated hyperbranched polyesters is reported. The synthesis is very simple, just a one‐step esterification of the commercially available hydroxy‐terminated hyperbranched polyester of Boltorn Hx (x = 20, 30, 40) with succinic anhydride. The vesicle size can be controlled from 200 nm to 10 µm by simply adjusting the solution pH as well as the degrees of branching (or generation).
Novel conjugated carbazole polymers based on the alkyne‐linked 1,8‐carbazole structure are synthesized in high yield by the Sonogashira cross‐coupling reaction and acetylenic oxidative coupling reaction. The polymers are thermally stable and highly soluble in common organic solvents such as CHCl3, CH2Cl2, and THF. As compared to ethynylene‐linked polymer, the butadiynylene‐linked polymer display a bathochromic shift in the absorption maximum and end absorption position. In addition, the fluorescence behaviors in CH2Cl2 are almost identical for both polymers. Electrochemical measurements indicate that the ethynylene‐linked polymer possesses a lower first oxidation potential than the butadiynylene‐linked one.
The synthesis and characterization of a soluble high molecular weight copolymer based on 4,8‐bis(1‐pentylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene and 2,1,3‐benzoxadiazole is presented. High efficiency organic photovoltaic (OPV) devices comprised of this polymer and phenyl‐C71‐butyric acid methyl ester (PC71BM) were fabricated by additive processing with 1‐chloronapthalene (CN). When the active layer is cast from pristine chlorobenzene (CB), power conversion efficiencies (PCEs) average 1.41%. Our best condition—using 2% chloronapthalene as a solvent additive in CB—results in an average PCE of 5.65%, with a champion efficiency of 6.05%.
2,5‐Bis(chloromethyl)‐1,3,4‐oxadiazole was synthesized and dehydrohalogenation of this model compound was investigated under various base conditions. The formation of an intermediate with quinodimethane‐type structure is suggested for reaction in EtONa/EtOH. Polymerization of this intermediate proceeds via an anionic mechanism to form poly(1,3,4‐oxadiazole‐2,5‐diyl‐1,2‐vinylene). Polymerization at a toluene/water interface results in shorter polymerization times, milder conditions, higher molecular weights, higher yields and fewer defects in the polymer as compared to the corresponding polycondensation route.
The stability of weak fluorine bonds in homogeneous catalyst is studied at the ab initio level for an arylpyridine post‐metallocene complex. The Ti···F···Hβ interaction scheme, involving the agostic bond with titanium and the H‐bond with an Hβ in the growing chain, is found to be the the most stable one. A possible optimal overlap involving the fluorine lone pairs is proposed. This three‐center interaction could play a role in the inhibition of Hβ transfer to the metal or to the monomer in the termination reactions.
The monomer 3‐ethyl‐1‐vinyl‐2‐pyrrolidone ( 3 ) and the homopolymer poly(3‐ethyl‐1‐vinyl‐2‐pyrrolidone) ( 5 ) have been synthesized. Polymer 5 is soluble in water and shows a critical temperature (Tc) of 27 °C. The presence of cyclodextrin causes a slight shift of the Tc. The lower critical solution temperature (LCST) could be varied between 27 and 40 °C by copolymerization with N‐vinyl‐2‐pyrrolidone. A linear correlation between the Tc and the copolymer composition is observed.
Chlorine‐functionalized TEMPO‐capped polystyrenes were investigated using the matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) technique. Amine‐ and acrylate‐functionalized agents and bifunctional TEMPO‐capped polystyrene were also analyzed to demonstrate the applicability of this method. Using this technique allowed to analyze the conversion of the chlorine function to an acrylate function, which was previously difficult to detect with other methods.
MALDI‐TOF mass spectrum of a polystyrene described in this article, as obtained with DHB as the matrix. 相似文献
Tough networks are prepared by photo‐crosslinking high‐molecular‐weight DLLA and TMC macromers. These amorphous networks exhibit tunable thermal and mechanical properties and have excellent shape‐memory features. Variation of the monomer ratio allows adjustment of Tg between approximately ?13 and +51 °C. The elastic moduli at room temperature can be varied between 4.5 and 2730 MPa. The crosslinks allow the networks to return to their original shape after deformation. 60:40 DLLA:TMC networks have Tg values between room temperature and body temperature, with mechanical properties at body temperature close to soft tissues. Several medical devices are prepared from these networks.
Chemical vapor deposition (CVD) co‐polymerization was used to fabricate polymer coatings, which comprise of reactive surface composition gradients. Two functionalized derivatives of [2.2]paracyclophane were fed into a two‐source CVD system at a 180 ° angle, then copolymerized and deposited as a polymer gradient. Infrared and X‐ray photoelectron spectroscopy (XPS) confirmed the compositional changes within the bulk polymer and at the surface. By manipulating process parameters, gradients of tailored compositional slope can be deposited on a wide range of substrates. We also were able to selectively immobilize fluorescence‐labeled ligands onto the reactive polymer gradients, making CVD‐based gradient surfaces a flexible platform for fabricating biomolecular substrates.
Shining a light on click chemistry: The use of UV‐radiation as trigger signal provides a facile means to obtain spatial and temporal control over polymer conjugation reactions in addition to providing a further means of achieving orthogonality in click transformations. In the current contribution, UV‐radiation was employed to induce a highly efficient Diels–Alder conjugation of polymeric building blocks via the photo‐induced in situ formation of highly reactive cis‐dienes from a 2‐methylbenzophenone precursor.
Summary: Novel biodegradable copolymers derived from succinate, butan‐1,4‐diol, and butan‐1,4‐diamine were synthesized by two‐step polycondensation reactions. The obtained copolymers had a periodical‐sequence structure consisting of ester and amide units, and the melting temperatures of the periodic copolymers increased with an increase in amide content. The crystalline structure of the periodic copolymers differs from that of butylene succinate homopolymer (PBS), and these results suggest that the periodically introduced amide units are included in the crystalline phase forming a novel crystalline structure.
Periodic copolyester‐amides derived from succinate, butane‐1,4‐diol, and butan‐1,4‐diamine 相似文献
Poly(N‐isopropylacrylamide)‐block‐poly{6‐[4‐(4‐methylphenyl‐azo) phenoxy] hexylacrylate} (PNIPAM‐b‐PAzoM) was synthesized by successive reversible addition‐fragmentation chain transfer (RAFT) polymerization. In H2O/THF mixture, amphiphilic PNIPAM‐b‐PAzoM self‐assembles into giant micro‐vesicles. Upon irradiation of light at 365 nm, fusion of the vesicles was observed directly under an optical microscope. The real‐time fusion process is presented and the derivation is preliminarily due to the perturbation by the photoinduced trans‐to‐cis isomerization of azobenzene units in the vesicles.
A generalized silica coating scheme is used to functionalize and protect sub‐micron and micron size dicyclopentadiene monomer‐filled capsules and polymer‐protected Grubbs' catalyst particles. These capsules and particles are used for self‐healing of microscale damage in an epoxy‐based polymer. The silica layer both protects the capsules and particles, and limits their aggregation when added to an epoxy matrix, enabling the capsules and particles to be dispersed at high concentrations with little loss of reactivity.
New poly(diphenylacetylene)s with alkoxy and fluoroalkyl groups as electron‐donating and electron‐withdrawing groups, respectively, were synthesized by using a WCl6‐n‐Ph4Sn catalyst. The polymer solutions emitted strong, bluish‐green lights when photo‐excited. The polymers that contained the electron‐donating alkoxy groups showed longer fluorescence‐maximum peaks when compared to the polymers that contained the electron‐withdrawing fluoroalkyl groups. However, such an effect of the substituent on the absorption property was not clearly seen. The emission bands of the solid films did not show any significant red shift, relative to that of the dilute solution.
Chitosan was partially N‐acylated by treatment with n‐fatty acid anhydrides in a homogeneous solution in 2 vol.‐% aqueous acetic acid‐methanol (1:2 v/v). The degree of substitution (d.s.) for N‐acyl groups in the water‐soluble N‐acylchitosan derivatives was in the range of 0.42–0.82 for N‐acetyl, 0.37–0.76 for N‐propionyl, 0.52–0.71 for N‐butyryl and 0.54–0.64 for N‐pentanoyl and ca. 0.58 for N‐hexanoyl, respectively.
Based on their rigid‐rod structure all‐conjugated, rod‐rod block copolymers show a preferred tendency to self‐assemble into low‐curvature vesicular or lamellar nanostructures independent from their specific chemical structure and composition. This unique and attractive behaviour is clearly illustrated in a few examples of such all‐conjugated block copolymers. The resulting nanostructured heteromaterials may find applications in electronic devices or artificial membranes.
A one‐pot procedure for the synthesis of hyperbranched polyethylenes tethered with ATRP initiating sites by chain walking ethylene copolymerization with an acrylate‐type ATRP inimer, 2‐(2‐bromoisobutyryloxy) ethyl acrylate (BIEA) is reported. Because of its ability to incorporate acrylate‐type comonomers and tolerance toward the α‐bromoester group, the chain walking Pd‐diimine catalyst, [(ArNC(Me) (Me)CNAr)Pd(CH3)(NCMe)]SbF6 (Ar = 2,6‐(iPr)2C6H3), allowed the successful synthesis of a series of hyperbranched copolymers tethered with 2‐bromoisobutyryl groups at different densities. These copolymers may serve as polyfunctional macroinitiators for the ATRP of functional monomers to further synthesize core‐shell structured functionalized copolymers with a hyperbranched polyethylene core grafted with side chains of the functional monomers.
