Synthesis and Raman spectroscopic characterisation of hydrotalcite with CO32− and VO3− anions in the interlayer

Infrared and Raman spectroscopy were used to characterise synthetic mixed carbonate and vanadate hydrotalcites of formula Mg₆Al₂(OH)₁₆(CO₃)²⁻, (VO₄)³⁻·4H₂ O. The spectra were used to assess the molecular assembly of the cations and anions in the hydrotalcite structure. The spectra may be conveniently subdivided into spectral features based on (1) the carbonate anion (2) the hydroxyl units and (3) water units. Bands were assigned to the hydroxyl stretching vibrations of water. Three types of carbonate anions were identified: (1) carbonate hydrogen‐bonded to water in the interlayer, (2) carbonate hydrogen‐bonded to the hydrotalcite hydroxyl surface and (3) free carbonate anions. It is proposed that the water is highly structured in the hydrotalcite, as it is hydrogen‐bonded to both the carbonate and the hydroxyl surface. The spectra were used to assess the contamination of carbonate in an open reacting vessel in the synthesis of vanadate hydrotalcites of formula Mg₆Al₂(OH)₁₆(CO₃)²⁻, (VO₄)³⁻·4H₂ O. Bands have been assigned to vanadate anions in the infrared and Raman spectra associated with V O bonds. Copyright © 2007 John Wiley & Sons, Ltd.     

Raman spectroscopic study of synthetic reevesite and cobalt substituted reevesite (Ni,Co)6Fe2(OH)16(CO3)·4H2O

Raman spectroscopy, complemented with infrared spectroscopy of compounds equivalent to reevesite, formula (Ni,Co)₆Fe₂(OH)₁₆(CO₃)·4H₂O, with the ratio of Ni/Co ranging from 0 to 1, have been synthesised and characterised based on the molecular structure of the synthesised mineral. The combination of Raman spectroscopy with infrared spectroscopy enables an assessment of bands attributable to water stretching and brucite‐like surface hydroxyl units to be obtained. Raman spectroscopy shows a reduction in the symmetry of the carbonate anion, leading to the conclusion that the carbonate anion is bonded to the brucite‐like hydroxyl surface and to the water in the interlayer. Variation in the position of the carbonate anion stretching vibrations occurs and is dependent on the Ni/Co ratio. Water bending modes are identified in both the Raman and infrared spectra at positions greater than 1620 cm⁻¹, indicating that water is strongly hydrogen bonded to both the interlayer anions and the hydrotalcite surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and Raman spectroscopic characterisation of hydrotalcite with CO32− and (MoO4)2− anions in the interlayer

Raman spectroscopy has been used to characterise synthetic mixed carbonate and molybdate hydrotalcites of formula Mg₆Al₂(OH)₁₆((CO₃)²⁻,(MoO₄)²⁻)·4H₂O. The spectra have been used to assess the molecular assembly of the cations and anions in the hydrotalcite structure. The spectra may be conveniently subdivided into spectral features on the basis of the carbonate anion, the molybdate anion, the hydroxyl units and water units. Bands are assigned to the hydroxyl stretching vibrations of water. Three types of carbonate anions are identified: (1) carbonate hydrogen‐bonded to water in the interlayer, (2) carbonate hydrogen‐bonded to the hydrotalcite hydroxyl surface, (3) free carbonate anions. It is proposed that the water is highly structured in the hydrotalcite, as it is hydrogen bonded to both the carbonate and the hydroxyl surface. The spectra have been used to assess the contamination of carbonate in an open reaction vessel in the synthesis of a molybdate hydrotalcite of formula Mg₆Al₂(OH)₁₆((CO₃)²⁻, (MoO₄)²⁻)·4H₂O. Bands are assigned to carbonate and molybdate anions in the Raman spectra. Importantly, the synthesis of hydrotalcites from solutions containing molybdate provides a mechanism for the removal of this oxy‐anion. Copyright © 2007 John Wiley & Sons, Ltd.     

Raman spectroscopy of gallium‐based hydrotalcites of formula Mg6Ga2(CO3)(OH)16· 4H2O

Insight into the unique structure of hydrotalcites has been obtained using Raman spectroscopy. Gallium‐containing hydrotalcites of formula Mg₄Ga₂(CO₃)(OH)₁₂· 4H₂O (2:1 Ga‐HT) to Mg₈Ga₂(CO₃)(OH)₂₀· 4H₂O (4:1 Ga‐HT) have been successfully synthesized and characterized by X‐ray diffraction and Raman spectroscopy. The d(003) spacing varied from 7.83 Å for the 2:1 hydrotalcite to 8.15 Å for the 3:1 gallium‐containing hydrotalcite. Raman spectroscopy complemented with selected infrared data has been used to characterize the synthesized gallium‐containing hydrotalcites of formula Mg₆Ga₂(CO₃)(OH)₁₆· 4H₂O. Raman bands observed at around 1046, 1048 and 1058 cm⁻¹ are attributed to the symmetric stretching modes of the CO₃²⁻ units. Multiple ν₃ CO₃²⁻ antisymmetric stretching modes are found at around 1346, 1378, 1446, 1464 and 1494 cm⁻¹. The splitting of this mode indicates that the carbonate anion is in a perturbed state. Raman bands observed at 710 and 717 cm⁻¹ assigned to the ν₄ (CO₃²⁻) modes support the concept of multiple carbonate species in the interlayer. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and Raman spectroscopic characterisation of hydrotalcites based on the formula Ca6Al2(CO3)(OH)16· 4H2O

We have successfully synthesised hydrotalcites (HTs) containing calcium, which are naturally occurring minerals. Insight into the unique structure of HTs has been obtained using a combination of X‐ray diffraction (XRD) as well as infrared and Raman spectroscopies. Calcium‐containing hydrotalcites (Ca‐HTs) of the formula Ca₄Al₂(CO₃)(OH)₁₂·4H₂O (2:1 Ca‐HT) to Ca₈Al₂(CO₃)(OH)₂₀· 4H₂O (4:1 Ca‐HT) have been successfully synthesised and characterised by XRD and Raman spectroscopy. XRD has shown that 3:1 calcium HTs have the largest interlayer distance. Raman spectroscopy complemented with selected infrared data has been used to characterise the synthesised Ca‐HTs. The Raman bands observed at around 1086 and 1077 cm⁻¹ were attributed to the ν₁ symmetric stretching modes of the (CO₃²⁻) units of calcite and carbonate intercalated into the HT interlayer. The corresponding ν₃ CO₃²⁻ antisymmetric stretching modes are found at around 1410 and 1475 cm⁻¹. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopy of gallium‐ and zinc‐based hydrotalcites

Insight into the unique structure of hydrotalcites (HTs) has been obtained using Raman spectroscopy. Gallium‐containing HTs of formula Zn₄ Ga₂(CO₃)(OH)₁₂ · xH₂O (2:1 ZnGa‐HT), Zn₆ Ga₂(CO₃)(OH)₁₆ · xH₂O (3:1 ZnGa‐HT) and Zn₈ Ga₂(CO₃)(OH)₁₈ · xH₂O (4:1 ZnGa‐HT) have been successfully synthesised and characterised by X‐ray diffraction (XRD) and Raman spectroscopy. The d(003) spacing varies from 7.62 Å for the 2:1 ZnGa‐HT to 7.64 Å for the 3:1 ZnGa‐HT. The 4:1 ZnGa‐HT showed a decrease in the d(003) spacing, compared to the 2:1 and 3:1 compounds. Raman spectroscopy complemented with selected infrared data has been used to characterise the synthesised gallium‐containing HTs. Raman bands observed at around 1050, 1060 and 1067 cm⁻¹ are attributed to the symmetric stretching modes of the (CO₃²⁻) units. Multiple ν₃ (CO₃²⁻) antisymmetric stretching modes are found between 1350 and 1520 cm⁻¹, confirming multiple carbonate species in the HT structure. The splitting of this mode indicates that the carbonate anion is in a perturbed state. Raman bands observed at 710 and 717 cm⁻¹ and assigned to the ν₄ (CO₃²⁻) modes support the concept of multiple carbonate species in the interlayer. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the hydrogen‐arsenate mineral pharmacolite Ca(AsO3OH)·2H2O—implications for aquifer and sediment remediation

The removal of arsenate anions from aqueous media, sediments and wasted soils is of environmental significance. The reaction of gypsum with the arsenate anion results in pharmacolite mineral formation, together with related minerals. Raman and infrared (IR) spectroscopy have been used to study the mineral pharmacolite Ca(AsO₃OH)· 2H₂O. The mineral is characterised by an intense Raman band at 865 cm⁻¹ assigned to the ν₁ (AsO₃)²⁻ symmetric stretching mode. The equivalent IR band is found at 864 cm⁻¹. The low‐intensity Raman bands in the range from 844 to 886 cm⁻¹ provide evidence for ν₃ (AsO₃) antisymmetric stretching vibrations. A series of overlapping bands in the 300‐450 cm⁻¹ region are attributed to ν₂ and ν₄ (AsO₃) bending modes. Prominent Raman bands at around 3187 cm⁻¹ are assigned to the OH stretching vibrations of hydrogen‐bonded water molecules and the two sharp bands at 3425 and 3526 cm⁻¹ to the OH stretching vibrations of only weakly hydrogen‐bonded hydroxyls in (AsO₃OH)²⁻ units. Copyright © 2009 John Wiley & Sons, Ltd.     

Dussertite BaFe3+3(AsO4)2(OH)5—a Raman spectroscopic study of a hydroxy‐arsenate mineral

The mineral dussertite, a hydroxy‐arsenate mineral with formula BaFe³⁺₃(AsO₄)₂(OH)₅, has been studied by Raman spectroscopy complemented with infrared spectroscopy. The spectra of three minerals from different origins were investigated and proved to be quite similar, although some minor differences were observed. In the Raman spectra of the Czech dussertite, four bands are observed in the 800–950 cm⁻¹ region. The bands are assigned as follows: the band at 902 cm⁻¹ is assigned to the (AsO₄)³⁻ν₃ antisymmetric stretching mode, the one at 870 cm⁻¹ to the (AsO₄)³⁻ν₁ symmetric stretching mode, and those at 859 and 825 cm⁻¹ to the As‐OM^{2 + /3+} stretching modes and/or hydroxyl bending modes. Raman bands at 372 and 409 cm⁻¹ are attributed to the ν₂ (AsO₄)³⁻ bending mode and the two bands at 429 and 474 cm⁻¹ are assigned to the ν₄ (AsO₄)³⁻ bending mode. An intense band at 3446 cm⁻¹ in the infrared spectrum and a complex set of bands centred upon 3453 cm⁻¹ in the Raman spectrum are attributed to the stretching vibrations of the hydrogen‐bonded (OH)⁻ units and/or water units in the mineral structure. The broad infrared band at 3223 cm⁻¹ is assigned to the vibrations of hydrogen‐bonded water molecules. Raman spectroscopy identified Raman bands attributable to (AsO₄)³⁻ and (AsO₃OH)²⁻ units. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the uranyl carbonate mineral voglite

Raman spectroscopy, complemented with infrared spectroscopy, was used to study the uranyl carbonate mineral voglite. The mineral has the formula Ca₂Cu²⁺ [(UO₂)(CO₃)₃](CO₃)^•6H₂O, and bands attributed to these vibrating units are readily identified in the Raman spectrum. Symmetric stretching modes at 836 and 1094 cm⁻¹ are assigned to ν₁(UO₂)²⁺ and ν₁(CO₃)²⁻ units, respectively. The ν₃ antisymmetric stretching modes of (UO₂)²⁺ are not observed in the Raman spectrum but may be readily observed in the infrared spectrum at 898 cm⁻¹. The ν₃ antisymmetric stretching mode of (CO₃)²⁻ is observed in the Raman spectrum at 1369 cm⁻¹ as a low intensity band as is also the ν₃(CO₃)²⁻ infrared modes at 1362, 1425, 1509 and 1566 cm⁻¹. No ν₂(CO₃)²⁻ Raman bending modes are observed for voglite. The Raman band at 749 cm⁻¹ and the two infrared bands at 747 and 709 cm⁻¹ are assigned to the ν₄(CO₃)²⁻ bending modes. U O bond and O H…O bond lengths in the structure of voglite were inferred from the infrared and Raman spectra. Copyright © 2007 John Wiley & Sons, Ltd.     

A Raman spectroscopic study of the uranyl carbonate rutherfordine

The molecular structure of the uranyl mineral rutherfordine has been investigated by the measurement of its Raman spectra at 298 and 77 K and complemented with infrared spectra. The infrared spectra of the (CO₃)²⁻ units in the anti‐symmetric stretching region show complexity with three sets of carbonate bands observed. This, combined with the observation of multiple bands in the (CO₃)²⁻ bending region in both Raman and IR spectra, suggests that both monodentate and bidentate (CO₃)²⁻ units are present in the structure in accordance with the X‐ray crystallographic studies. Complexity is also observed in the IR spectra of (UO₂)²⁺ anti‐symmetric stretching region and is attributed to non‐identical UO bonds. Both Raman and infrared spectra of the rutherfordine show the presence of both water and hydroxyl units in the structure, as evidenced by IR bands at 3562 and 3465 cm⁻¹ (OH) and 3343, 3185 and 2980 cm⁻¹ (H₂O). Raman spectra show the presence of four sharp bands at 3511, 3460, 3329 and 3151 cm⁻¹. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis and Raman spectroscopy of indium‐based hydrotalcites of formula Mg6In2(CO3)(OH)16· 4H2O

Insight into the unique structure of layered double hydroxides has been obtained using a combination of X‐ray diffraction and Raman spectroscopy. Indium‐containing hydrotalcites of formula Mg₄In₂(CO₃)(OH)₁₂· 4H₂O [2:1 In‐LDH (layered double hydroxides)] through to Mg₈In₂(CO₃)(OH)₁₈· 4H₂O (4:1 In‐LDH) with variation in the Mg : In ratio have been successfully synthesized. The d(003) spacing varied from 7.83 Å for the 2:1 LDH to 8.15 Å for the 3:1 indium‐containing layered double hydroxide. Raman spectroscopy complemented with selected infrared data has been used to characterize the synthesized indium‐containing layered double hydroxides of formula Mg₆In₂(CO₃)(OH)₁₆· 4H₂O. Raman bands observed at around 1058, 1075 and 1115 cm⁻¹ are attributed to the symmetric stretching modes of the CO₃²⁻ units. Multiple ν₃ CO₃²⁻ antisymmetric stretching modes are found at around 1348, 1373, 1429 and 1488 cm⁻¹ in the infrared spectra. The splitting of this mode indicates that the carbonate anion is in a perturbed state. Raman bands observed at 690 and 700 cm⁻¹ assigned to the ν₄ CO₃²⁻ modes support the concept of multiple carbonate species in the interlayer. Copyright © 2010 John Wiley & Sons, Ltd.     

A Raman spectroscopic study of bukovskýite Fe2(AsO4)(SO4)(OH)· 7H2O,a mineral phase with a significant role in arsenic migration

The Raman spectrum of bukovskýite [Fe³⁺₂(OH)(SO₄)(AsO₄)· 7H₂O] has been studied and compared with that of an amorphous gel containing specifically Fe, As and S, which is understood to be an intermediate product in the formation of bukovskýite. The observed bands are assigned to the stretching and bending vibrations of (SO₄)²⁻ and (AsO₄)³⁻ units, stretching and bending vibrations and vibrational modes of hydrogen‐bonded water molecules, stretching and bending vibrations of hydrogen‐bonded (OH)⁻ ions and Fe³⁺ (O,OH) units. The approximate range of O H···O hydrogen bond lengths was inferred from the Raman spectra. Raman spectra of crystalline bukovskýite and of the amorphous gel differ in that the bukovskýite spectrum is more complex, the observed bands are sharp and the degenerate bands of (SO₄)²⁻ and (AsO₄)³⁻ are split and more intense. Lower wavenumbers of δ H₂O bending vibrations in the spectrum of the amorphous gel may indicate the presence of weaker hydrogen bonds compared to those in bukovskýite. Copyright © 2011 John Wiley & Sons, Ltd.     

Raman spectrum of decrespignyite [(Y,REE)4Cu(CO3)4Cl(OH)5·2H2O] and its relation with those of other halogenated carbonates including bastnasite,hydroxybastnasite, parisite and northupite

Raman spectroscopy complemented with infrared spectroscopy has been used to study the rare‐earth‐based mineral decrespignyite [(Y,REE)₄Cu(CO₃)₄Cl(OH)₅· 2H₂O] and the spectrum compared with the Raman spectra of a series of selected natural halogenated carbonates from different origins including bastnasite, parisite and northupite. The Raman spectrum of decrespignyite displays three bands at 1056, 1070 and 1088 cm⁻¹ attributed to the CO₃²⁻ symmetric stretching vibration. The observation of three symmetric stretching vibrations is very unusual. The position of the CO₃²⁻ symmetric stretching vibration varies with the mineral composition. The Raman spectrum of decrespignyite shows bands at 1391, 1414, 1489 and 1547 cm⁻¹, whereas the Raman spectra of bastnasite, parisite and northupite show a single band at 1433, 1420 and 1554 cm⁻¹, respectively, assigned to the ν₃ (CO₃)²⁻ antisymmetric stretching mode. The observation of additional Raman bands for the ν₃ modes for some halogenated carbonates is significant in that it shows distortion of the carbonate anion in the mineral structure. Four Raman bands are observed at 791, 815, 837 and 849 cm⁻¹, which are assigned to the (CO₃)²⁻ν₂ bending modes. Raman bands are observed for decrespignyite at 694, 718 and 746 cm⁻¹ and are assigned to the (CO₃)²⁻ν₄ bending modes. Raman bands are observed for the carbonate ν₄ in‐phase bending modes at 722 cm⁻¹ for bastnasite, 736 and 684 cm⁻¹ for parisite and 714 cm⁻¹ for northupite. Multiple bands are observed in the OH stretching region for decrespignyite, bastnasite and parisite, indicating the presence of water and OH units in the mineral structure. Copyright © 2011 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the mixed anion mineral yecoraite Bi5Fe3O9(Te4+O3)(Te6+O4)2·9H2O

Tellurates are rare minerals as the tellurate anion is readily reduced to the tellurite ion. Often minerals with both tellurate and tellurite anions are found. An example of such a mineral containing tellurate and tellurite is yecoraite. Raman spectroscopy has been used to study this mineral, the exact structure of which is unknown. Two Raman bands at 796 and 808 cm⁻¹ are assigned to the ν₁(TeO₄)²⁻ symmetric and ν₃(TeO₃)²⁻ antisymmetric stretching modes and Raman bands at 699 cm⁻¹ are attributed to the ν₃(TeO₄)²⁻ antisymmetric stretching mode and the band at 690 cm⁻¹ to the ν₁(TeO₃)²⁻ symmetric stretching mode. The intense band at 465 cm⁻¹ with a shoulder at 470 cm⁻¹ is assigned the (TeO₄)²⁻ and (TeO₃)²⁻ bending modes. Prominent Raman bands are observed at 2878, 2936, 3180 and 3400 cm⁻¹. The band at 3936 cm⁻¹ appears quite distinct and the observation of multiple bands indicates the water molecules in the yecoraite structure are not equivalent. The values for the OH stretching vibrations listed provide hydrogen bond distances of 2.625 Å (2878 cm⁻¹), 2.636 Å (2936 cm⁻¹), 2.697 Å (3180 cm⁻¹) and 2.798 Å (3400 cm⁻¹). This range of hydrogen bonding contributes to the stability of the mineral. A comparison of the Raman spectra of yecoraite with that of tellurate containing minerals kuranakhite, tlapallite and xocomecatlite is made. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the schmiederite Pb2Cu2[(OH)4|SeO3|SeO4]

Raman spectroscopy lends itself to the studies of selenites, selenates, tellurites and tellurates as well as related minerals. The mineral schmiederite Pb₂Cu₂[(OH)₄|SeO₃|SeO₄], is interesting, in that, both selenite and selenate anions occur in the structure. Raman bands of schmiederite at 1095 and 934 cm⁻¹ are assigned to the symmetric and antisymmetric mode of the (SeO₄)²⁻ anions. For selenites, the symmetric stretching mode occurs at a higher position than the antisymmetric stretching mode, as is evidenced in the Raman spectrum of schmiederite. The band at 834 cm⁻¹ is assigned to the symmetric (SeO₃)²⁻ units. The two bands at 764 and 739 cm⁻¹ are attributed to the antisymmetric (SeO₃)²⁻ units. An intense, sharp band at 398 cm⁻¹ is assigned to the ν₂ bending mode. The two bands at 1576 and 1604 cm⁻¹ are assigned to the deformation modes of the OH units. The observation of multiple OH bands supports the concept of a much distorted structure. This is based upon the four OH units coordinating the copper in a square planar structure. A single symmetric Raman band is observed at 3428 cm⁻¹ and is assigned to the symmetric stretching mode of the OH units. The observation of multiple infrared OH stretching bands supports the concept of non‐equivalent OH units in the schmiederite structure. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the magnesium carbonate mineral hydromagnesite (Mg5[(CO3)4(OH)2]· 4H2O)

Magnesium minerals are important for understanding the concept of geosequestration. One method of studying the hydrated hydroxy magnesium carbonate minerals is through vibrational spectroscopy. A combination of Raman and infrared spectroscopy has been used to study the mineral hydromagnesite. An intense band is observed at 1121 cm⁻¹, attributed to the CO₃²⁻ν₁ symmetric stretching mode. A series of infrared bands at 1387, 1413 and 1474 cm⁻¹ are assigned to the CO₃²⁻ν₃ antisymmetric stretching modes. The CO₃²⁻ν₃ antisymmetric stretching vibrations are extremely weak in the Raman spectrum and are observed at 1404, 1451, 1490 and 1520 cm⁻¹. A series of Raman bands at 708, 716, 728 and 758 cm⁻¹ are assigned to the CO₃²⁻ν₂ in‐plane bending mode. The Raman spectrum in the OH stretching region is characterized by bands at 3416, 3516 and 3447 cm⁻¹. In the infrared spectrum, a broad band is found at 2940 cm⁻¹, which is assigned to water stretching vibrations. Infrared bands at 3430, 3446, 3511, 2648 and 3685 cm⁻¹ are attributed to MgOH stretching modes. Copyright © 2011 John Wiley & Sons, Ltd.     

Raman spectroscopy of halogen‐containing carbonates

Raman spectroscopy complemented with infrared spectroscopy has been used to study a series of selected natural halogenated carbonates from different origins, including bastnasite, parisite and northupite. The position of CO₃²⁻ symmetric stretching vibration varies with the mineral composition. An additional band for northupite at 1107 cm⁻¹ is observed. Raman spectra of bastnasite, parisite and northupite show single bands at 1433, 1420 and 1554 cm⁻¹, respectively, assigned to the ν₃ (CO₃)²⁻ asymmetric stretching mode. The observation of additional Raman bands for the ν₃ modes for some halogenated carbonates is significant in that it shows distortion of the CaO₆ octahedron. No ν₂ Raman bending modes are observed for these minerals. The band is observed in the infrared spectra, and multiple ν₂ modes at 844 and 867 cm⁻¹ are observed for parisite. A single intense infrared band is found at 879 cm⁻¹ for northupite. Raman bands are observed forthe carbonate ν₄ in‐phase bending modes at 722 cm⁻¹ for bastnasite, 736 and 684 cm⁻¹ for parisite and 714 cm⁻¹ for northupite. Multiple bands are observed in the OH stretching region for selected bastansites and parisites, indicating the presence of water and OH units in the mineral structure. The presence of such bands brings into question the actual formula of these halogenated carbonate minerals. Copyright © 2007 John Wiley & Sons, Ltd.     

A Raman spectroscopic study of humite minerals

Raman spectroscopy has been used to study the structure of the humite mineral group ((A₂SiO₄)_n–A(OH, F)₂ where n represents the number of olivine and brucite layers in the structure and is 1, 2, 3 or 4 and A²⁺ is Mg, Mn, Fe or some mix of these cations). The humite group of minerals forms a morphotropic series with the minerals olivine and brucite. The members of the humite group contain layers of the olivine structure that alternate with layers of the brucite‐like sheets. The minerals are characterized by a complex set of bands in the 800–1000 cm⁻¹ region attributed to the stretching vibrations of the olivine (SiO₄)⁴⁻ units. The number of bands in this region is influenced by the number of olivine layers. Characteristic bending modes of the (SiO₄)⁴⁻ units are observed in the 500–650 cm⁻¹ region. The brucite sheets are characterized by the OH stretching vibrations in the 3475–3625 cm⁻¹ wavenumber region. The position of the OH stretching vibrations is determined by the strength of the hydrogen bond formed between the brucite‐like OH units and the olivine silica layer. The number of olivine sheets and not the chemical composition determines the strength of the hydrogen bonds. Copyright © 2006 John Wiley & Sons, Ltd.     

A Raman spectroscopic study of the antimony mineral klebelsbergite Sb4O4(OH)2(SO4)

Many minerals based upon antimonite and antimonate anions remain to be studied. Most of the bands occur in the low wavenumber region, making the use of infrared spectroscopy difficult. This problem can be overcome by using Raman spectroscopy. The Raman spectra of the mineral klebelsbergite Sb₄O₄(OH)₂(SO₄) were studied and related to the structure of the mineral. The Raman band observed at 971 cm⁻¹ and a series of overlapping bands are observed at 1029, 1074, 1089, 1139 and 1142 cm⁻¹ are assigned to the SO₄²⁻ν₁ symmetric and ν₃ antisymmetric stretching modes, respectively. Two Raman bands are observed at 662 and 723 cm⁻¹, which are assigned to the Sb O ν₃ antisymmetric and ν₁ symmetric stretching modes, respectively. The intense Raman bands at 581, 604 and 611 cm⁻¹ are assigned to the ν₄ SO₄²⁻ bending modes. Two overlapping bands at 481 and 489 cm⁻¹ are assigned to the ν₂ SO₄²⁻ bending mode. Low‐intensity bands at 410, 435 and 446 cm⁻¹ may be attributed to O Sb O bending modes. The Raman band at 3435 cm⁻¹ is attributed to the O H stretching vibration of the OH units. Multiple Raman bands for both SO₄²⁻ and Sb O stretching vibrations support the concept of the non‐equivalence of these units in the klebelsbergite structure. It is proposed that the two sulfate anions are distorted to different extents in the klebelsbergite structure. Copyright © 2010 John Wiley & Sons, Ltd.     

A Raman spectroscopic study of the uranyl mineral rutherfordine—revisited

The molecular structure of the uranyl mineral rutherfordine has been investigated by the measurement of the near‐infrared (NIR) and Raman spectra and complemented with infrared spectra including their interpretation. The spectra of rutherfordine show the presence of both water and hydroxyl units in the structure as evidenced by IR bands at 3562 and 3465 cm⁻¹ (OH) and 3343, 3185 and 2980 cm⁻¹ (H₂O). Raman spectra show the presence of four sharp bands at 3511, 3460, 3329 and 3151 cm⁻¹. Corresponding molecular water bending vibrations were only observed in both Raman and infrared spectra of one of two studied rutherfordine samples. The second rutherfordine sample studied contained only hydroxyl ions in the equatorial uranyl plane and did not contain any molecular water. The infrared spectra of the (CO₃)²⁻ units in the antisymmetric stretching region show complexity with three sets of carbonate bands observed. This combined with the observation of multiple bands in the (CO₃)²⁻ bending region in both the Raman and IR spectra suggests that both monodentate and bidentate (CO₃)²⁻ units may be present in the structure. This cannot be exactly proved and inferred from the spectra; however, it is in accordance with the X‐ray crystallographic studies. Complexity is also observed in the IR spectra of (UO₂)²⁺ antisymmetric stretching region and is attributed to non‐identical UO bonds. U O bond lengths were calculated using wavenumbers of the ν₃ and ν₁ (UO₂)²⁺ and compared with data from X‐ray single crystal structure analysis of rutherfordine. Existence of solid solution having a general formula (UO₂)(CO₃)_1−x(OH)_2x.yH₂O (x, y ≥ 0) is supported in the crystal structure of rutherfordine samples studied. Copyright © 2009 John Wiley & Sons, Ltd.