Adsorption of 1,2,4‐triazole on a silver electrode: surface‐enhanced Raman spectroscopy and density functional theory studies

The pH‐dependent surface‐enhanced Raman scattering (SERS) of 1,2,4‐triazole adsorbed on silver electrode and normal Raman (NR) spectra of this compound in the aqueous solutions were investigated. The observed bands in the NR and SERS spectra were assigned with the help of density functional theory calculations for model molecules in the neutral, anionic, and cationic forms and their complexes with silver. The Raman wavenumbers and intensities were computed at the optimized molecular geometry. Vibrational assignments of the SERS and NR spectra are provided by calculated potential energy distributions. The combination of experimental SERS results and density functional theory calculations provide an insight into the molecular structure of adlayers formed by 1,2,4‐triazole on a silver surface at varying pH values and enable the determination of molecular orientation with respect to the surface. Copyright © 2012 John Wiley & Sons, Ltd.     

Biocompatible gold/silver nanostars for surface‐enhanced Raman scattering

Raman‐enhancing properties of chitosan (CS)‐coated gold/silver nanostars (Au/AgNSs) were demonstrated by using them as a surface‐enhanced Raman scattering (SERS) probe. Based on the energy‐dispersive X‐ray spectroscopy element distribution maps and highly enhanced SERS spectra, we suggest that the incorporation of silver into the NS tips leads to a stronger SERS behavior. The SERS spectra of the proteins adsorbed on the NS surface greatly differ from their respective Raman spectra in both the band positions and relative intensities, indicating that the protein molecules penetrate through the CS coating layer and interact closely with the NS surface. Raman and SERS spectra of Chlamydia trachomatis protease/proteasomelike activity factor are reported for the first time, demonstrating the potential of these NSs for the development of a diagnosis method for Chlamydia based on SERS. The results showed a good SERS performance of the Au/AgNSs and their potential for SERS detection of biomolecules. Copyright © 2016 John Wiley & Sons, Ltd.     

pH‐dependent surface‐enhanced Raman scattering studies of N‐acetylalanine monolayers self‐assembled on a silver surface

Monolayers of N‐acetylalanine on a metallic surface can serve as a biocompatible functional interface to construct biosensors. In the present paper, the surface‐enhanced Raman scattering (SERS) spectra of N‐acetylalanine monolayers self‐assembled on a silver surface under different pH were recorded. Assignments of the obtained spectra were carried out by density functional theory (DFT) calculations (BLYP/6‐311G). On the basis of the SERS effect, the nature of adsorption of N‐acetylalanine on a silver surface was deduced. It can be concluded that the fully protonated N‐acetylalanine is adsorbed on the silver surface via the imine group together with the carboxylate group, while it anchored onto the surface not only through both the imine and the carboxylate groups but also through the amide group after being completely deprotonated in the basic solution. Copyright © 2007 John Wiley & Sons, Ltd.     

Size‐dependent SERS enhancement of colloidal silver nanoplates: the case of 2‐amino‐5‐nitropyridine

Surface‐enhanced Raman scattering (SERS) spectra of 2‐amino‐5‐nitropyridine (ANP) adsorbed on colloidal silver triangular nanoplates were obtained using samples with different mean sizes and surface plasmon frequencies. The relative SERS enhancement factor for each sample was determined by the analysis of the normalized SERS excitation profiles of ANP vibrational modes for nanoplates in suspension, without aggregation. The SERS profiles are blue‐shifted in relation to the localized surface plasmon peak. The detailed characterization of both morphology and concentration of the samples in addition to a rigorous normalization of the SERS spectra allowed a quantitative correlation between the SERS profiles and the mean size of the nanoplates. This correlation indicated the existence of an optimum size of the nanoplates for maximum Raman enhancement. Copyright © 2008 John Wiley & Sons, Ltd.     

Near‐IR surface‐enhanced Raman spectrum of lignin

Compacted powders of commercially available nano‐ and microparticles of silver were used to successfully induce the surface‐enhanced Raman scattering (SERS) effect in spruce milled‐wood lignin (MWL). For the two silver particle sizes used in this investigation, the spectra were mostly similar. Some general characteristics of the lignin SERS spectrum are described. The SERS technique was found to be sensitive for detecting lignin. Significant spectral changes were present between the SERS and normal Raman spectra of MWL. The SERS spectrum was assigned on the basis of literature‐reported vibrational assignments of lignin and its models. Based on significant changes in Raman features, we propose that the lignin is strongly adsorbed on silver. To determine whether SERS of lignin can be obtained directly from wood without its isolation, Wiley‐milled spruce wood (WMW) adsorbed on silver was studied. The results indicated that not only the surface‐enhancement effect was successfully induced in the WMW, but that its spectrum was similar to MWL SERS. Moreover, for WMW, no signals from the carbohydrate components were observed, and therefore, lignin was detected selectively. This nano‐ and microparticle‐based molecularly specific method is expected to make a significant contribution in identifying and investigating lignin in various lignin‐containing materials. Published in 2009 by John Wiley & Sons, Ltd.     

Fabrication and characterization of SERS‐active silver clusters on glassy carbon

In this article, a novel technique for the fabrication of surface enhanced Raman scattering (SERS) active silver clusters on glassy carbon (GC) has been proposed. It was found that silver clusters could be formed on a layer of positively charged poly(diallyldimethylammonium) (PDDA) anchored to a carbon surface by 4‐aminobenzoic acid when a drop containing silver nanoparticles was deposited on it. The characteristics of the obtained silver clusters have been investigated by atomic force microscopy (AFM), SERS and an SERS‐based Raman mapping technique in the form of line scanning. The AFM image shows that the silver clusters consist of several silver nanoparticles and the size of the clusters is in the range 80–100 nm. The SERS spectra of different concentrations of rhodamine 6G (R6G) on the silver clusters were obtained and compared with those from a silver colloid. The apparent enhancement factor (AEF) was estimated to be as large as 3.1 × 10⁴ relative to silver colloid, which might have resulted from the presence of ‘hot‐spots’ at the silver clusters, providing a highly localized electromagnetic field for the large enhancement of the SERS spectra of R6G. The minimum electromagnetic enhancement factor (EEF) is estimated to be 5.4 × 10⁷ by comparison with the SERS spectra of R6G on the silver clusters and on the bare GC surface. SERS‐based Raman mapping technique in the form of line scanning further illustrates the good SERS activity and reproducibility on the silver clusters. Finally, 4‐mercaptopyridine (4‐Mpy) was chosen as an analyte and the lowest detected concentration was investigated by the SERS‐active silver clusters. A concentration of 1.6 × 10⁻¹⁰ M 4‐Mpy could be detected with the SERS‐active silver clusters, showing the great potential of the technique in practical applications of microanalysis with high sensitivity. Copyright © 2006 John Wiley & Sons, Ltd.     

Vibrational spectroscopic studies and computational study of methyl(2‐methyl‐4,6–dinitrophenylsulfanyl)ethanoate

FT‐IR and FT‐Raman spectra of methyl(2‐methyl‐4,6–dinitrophenylsulfanyl)ethanoate (MDIE) were recorded and analyzed. Surface‐enhanced Raman scattering (SERS) spectra were recorded in silver colloid and silver electrode. The vibrational wavenumbers were computed using HF/6‐31G* and B3LYP/6‐31G* basis. The data obtained from vibrational wavenumber calculations are used to assign vibrational bands obtained in infrared and Raman spectroscopies as well as in SERS of the studied molecule. The first hyperpolarizability and infrared intensities are reported. The geometrical parameters of the title compound are in agreement with the reported similar derivatives. The presence of new bands at 1045 and 948 cm⁻¹ in the SERS spectrum in silver electrode is related to the change in orientation of the molecule with respect to the metal surface. In silver colloid SERS spectrum, the methyl group attached to the methoxy carbonyl group is close to the metal surface, whereas on silver electrode the methyl group attached to the phenyl ring is close to the metal surface. Copyright © 2009 John Wiley & Sons, Ltd.     

FT‐IR,FT‐Raman and SERS spectra of anilinium sulfate

The FT‐IR and FT‐Raman spectra of anilinium sulfate were recorded and analyzed. The surface‐enhanced Raman scattering (SERS) was recorded from a silver electrode. The vibrational wavenumbers of the compound have been computed using the Hartree‐Fock/6‐31G* basis and compared with the experimental values. The molecule is adsorbed on the silver surface with the benzene ring in a tilted orientation. The presence of amino and sulfate group vibrations in the SERS spectrum reveal the interaction between amino and sulfate groups with the silver surface. The direction of the charge transfer contribution to SERS has been discussed from the frontier orbital theory. Copyright © 2009 John Wiley & Sons, Ltd.     

Adsorption of 4,4′‐thiobisbenzenethiol on silver surfaces: surface‐enhanced Raman scattering study

Adsorption of 4,4′‐thiobisbenzenethiol (4,4′‐TBBT) on a colloidal silver surface and a roughened silver electrode surface was investigated by means of surface‐enhanced Raman scattering (SERS) for the first time, which indicates that 4,4′‐TBBT is chemisorbed on the colloidal silver surface as dithiolates by losing two H‐atoms of the S H bond, while as monothiolates on the roughened silver electrode. The different orientations of the molecules on both silver surfaces indicate the different adsorption behaviors of 4,4′‐TBBT in the two systems. It is inferred from the SERS signal that the two aromatic rings in 4,4′‐TBBT molecule are parallel to the colloidal silver surface as seen from the disappearance of ν_{C H} band (3054 cm⁻¹), which is a vibrational mode to be used to determine the orientation of a molecule on metals according to the surface selection rule, while on the roughened silver electrode surface they are tilted to the surface as seen from the enhanced signal of ν_{C H}. The orientation of the C‐S bond is tilted with respect to the silver surface in both cases as inferred from the strong enhancement of the ν_{C S}. SERS spectra of 4,4′‐TBBT on the roughened silver electrode with different applied potentials reveal that the enhancement of 4,4′‐TBBT on the roughened silver electrode surface may be related to the chemical mechanism (CM). More importantly, the adsorption of 4,4′‐TBBT on the silver electrode is expected to be useful to covalently adsorb metal nanoparticles through the free S H bond to form two‐ or three‐ dimensional nanostructures. Copyright © 2007 John Wiley & Sons, Ltd.     

Raman and surface‐enhanced Raman studies of α‐aminophosphinic inhibitors of metalloenzymes

Here, we report the nature of new di‐α‐amino (L¹–L³) and α‐amino‐α‐hydroxyphosphinic (L⁴–L⁶) acids, which are considered potential inhibitors of the aminopeptidase N, adsorbed on a colloidal silver surface by means of surface‐enhanced Raman scattering (SERS) spectroscopy. In order to reveal the adsorption mechanism of these species from their SERS spectra, Fourier‐transform Raman (FT‐RS) spectra of these nonadsorbed molecules were measured. By examining the enhancement, shift in wavenumbers, and changes in breadth of the SERS bands due to the adsorption process, we revealed that the tilted compounds interact with the colloidal silver substrate mainly through the benzene ring, amino group, and phosphinic moiety in the following way. The benzene ring of L² and L³ is ‘standing up’ on the colloidal silver surface, and the C N bond is almost vertical to it, while the tilt angle between the O PO bond and this surface is greater than 45°. On the other hand, for L¹, L⁴, and L⁵, the aromatic ring and C N bond are arranged more or less tilted, and the tilt angle between the O PO bond and the silver substrate is smaller than 45°. The elongation of the bond to the benzene ring, the L⁶ case, produces an almost horizontal orientation of the benzene ring and the O PO bond on the silver nanoparticles. For these ligands, the complement inhibition IC₅₀ tested in vitro using porcine kidney leucine aminopeptidase was correlated mainly with the behavior of the O PO and C CH N fragments on the silver surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman,infrared, SERS and theoretical study of 3‐(1‐phenylpropan‐2‐ylamino) propanenitrile,fenproporex

Infrared, Raman and surface‐enhanced Raman scattering (SERS) spectra of 3‐(1‐phenylpropan‐2‐ylamino)propanenitrile (fenproporex) have been recorded. Density functional theory (DFT) with the B3LYP functional was used for optimizations of ground state geometries and simulation of Raman and SERS vibrational spectra of this molecule. Bands of the vibrational spectra were assigned in detail. The comparison of SERS spectra obtained by using colloidal silver and gold nanoparticles with the corresponding Raman spectrum reveals enhancement and shifts in bands, suggesting a possible partial charge‐transfer mechanism in the SERS effect. Information about the orientation of fenproporex on the nanometer‐sized metal structures is also obtained. Copyright © 2011 John Wiley & Sons, Ltd.     

Protein adsorption drastically reduces surface‐enhanced Raman signal of dye molecules

There is an increasing interest in developing surface enhancement Raman spectroscopy methods for intracellular biomolecule and for in vitro protein detection that involve dye or protein–dye conjugates. In this work, we have demonstrated that protein adsorption on silver nanoparticle (AgNP) can significantly attenuate the surface‐enhanced Raman spectroscopy (SERS) signal of dye molecules in both protein/dye mixtures and protein/dye conjugates. SERS spectra of 12 protein/dye mixtures were acquired using 4 proteins [bovine serum albumin (BSA), lysozyme, trypsin, and concanavalin A] and three dyes [Rhodamine 6G, adenine, and fluorescein isothiocyanate (FITC)]. Besides the protein/dye mixtures, spectra were also obtained for the free dyes and four FITC‐conjugated proteins. While no SERS signal was observed in protein/FITC mixtures or conjugates, a significantly reduced SERS intensity (up to 3 orders of magnitude) was observed for both R6G and adenine in their respective protein mixtures. Quantitative estimation of the number of dye molecules absorbed onto AgNP implied that the degree of R6G SERS signal reduction in the R6G/BSA sample is 2 to 3 orders of magnitude higher than what could be accounted for by the difference in the amount of the absorbed dyes. This finding has significant implications for both intracellular SERS analyses and in vitro protein detection using SERS tagging strategies that rely on Raman dyes as reporter molecules. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering and density functional theory studies of bis(4‐aminophenyl)sulfone

Raman and surface‐enhanced Raman scattering (SERS) spectra of dapsone by using colloidal silver nanoparticles have been recorded. Density functional theory was used for the optimization of ground state geometries and simulation of the vibrational spectrum of this molecule. The SERS spectrum with a large silver cluster as a model metallic surface was simulated for the first time. Taking into account the experimental and calculated Raman as well as the SERS normal modes and the corresponding assignments, along with the modeling of the free dapsone and the one in the presence of the colloidal silver nanoparticles, the importance of the sulfone group on the SERS effect in dapsone was inferred. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering (SERS) spectra of hemoglobin on nano silver film prepared by electrolysis method

Nano silver films were prepared by the electrolysis method. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were employed to detect the morphology of the silver particles. The surface‐enhanced Raman scattering (SERS) spectra of the hemoglobin on nano silver film were recorded. It is seen from the SERS spectra that the nano silver films can enhance the Raman signals of the hemoglobin efficiently, and sodium citrate and phosphate buffered saline have no influence on the SERS spectra of hemoglobin. The electrolysis technique to fabricate this highly bioactive, stable, reusable, and low‐cost SERS substrate will be useful in the development of hemoglobin detection methods. Copyright © 2009 John Wiley & Sons, Ltd.     

Analysis of alizarin by surface‐enhanced and FT‐Raman spectroscopy

This paper presents the application of Raman spectroscopy (RS) for the structural study of alizarin adsorbed on a metallic surface. As a biologically active molecule, alizarin has remarkable antigenotoxic activity like other anthraquinone dyes. Alizarin is highly fluorescent and that limits the application of RS as an investigation method; however, the Fourier transform‐RS (FTRS) can be applied since the near‐infrared excitation line lies far away from the absorption region of alizarin. The surface enhanced‐RS (SERS) technique also makes the fluorescence quenching possible. In this work, monolayers of alizarin were deposited on the surface of an electrode by the immersion of silver substrates in methanolic solution of the analyte. From such prepared samples, by using the excitation of 488, 514.5 and 647.1 nm the Raman spectra were registered. Depending on the excitation line, SERS or surface‐enhanced resonance Raman scattering (SERRS) spectra of alizarin were observed. The interpretation of experimental data was supported by theoretical calculations. Copyright © 2008 John Wiley & Sons, Ltd.     

家蚕微粒子虫表面增强拉曼光谱研究

本文报导并分析了家蚕微粒子虫(Nosema bombycis Naegeli,缩写为NbN)孢子在PH4.0条件下的表面增强拉曼光谱(SERS),在常规的实验条件下未得到NbN的一般拉曼谱,同时也未获得其它PH条件下的表面增强拉曼谱。对获得的NbN的SERS分析表明:NbN孢子通过S原子,COO~-和NH_2基团被吸附到银胶表面上,Tyr、Trp残基侧链靠近银表面,以Tyr残基侧链的振动增强效应最显著。当NbN孢子吸附在银胶表面时,NbN孢子中的C—C—S—S—C—C链为扭曲—扭曲—反式结构。     

Surface‐enhanced Raman spectra of the neonicotinoid pesticide thiacloprid

Thiacloprid is a widely used pesticide belonging to the neonicotinoid class, which is characterized by a selective activity against insects and a reduced acute toxicity for humans. The importance of the environmental impact of neonicotinoids is being intensively researched, in order to evaluate the danger they pose for useful insects. Physical methods which allow the characterization of neonicotinoids in diluted aqueous solutions are therefore desirable. We present a study of Raman and surface‐enhanced Raman scattering (SERS) spectroscopy on thiacloprid in solid state, in acetone solution, and adsorbed onto silver and gold hydrosols at μM concentration. Density functional theory calculations allow the individualization of the most stable molecular structure, both in gas phase and in solution, and of the corresponding Raman spectra. The vibrational assignments lead to an interpretation of the differences between SERS and ordinary Raman spectra based on the possible interactions between the molecule and the metal surface, the main one involving the iminocyano group. Formation of a charge‐transfer complex is suggested by the dependence of the SERS spectra on the laser excitation wavelength. We evaluate the applicability of SERS spectroscopy to the chemical analysis of thiacloprid comparing SERS with current analytical methods. Copyright © 2013 John Wiley & Sons, Ltd.     

Thiol‐immobilized silver nanoparticle aggregate films for surface enhanced Raman scattering

We report a novel method for the fabrication of films of silver nanoparticle aggregates that are strongly attached to Si substrates (Thiol‐immobilized silver nanoparticle aggregates or TISNA). The attachment is achieved by chemically modifying the surface of a Si(100) surface in order to provide SH groups covalently linked to the substrate and then aggregating silver nanoparticles on these thiol covered surfaces. The transmission electron microscopy (TEM), scanning electron microscopy (SEM) and atomic force microscopy (AFM) characterization show a high coverage with single nanoparticles or small clusters and a partial coverage with fractal aggregates that provide potential hot spots for surface enhanced Raman scattering (SERS). We have confirmed the SERS activity of these films by adsorbing rhodamine 6G and recording the Raman spectra at several concentrations. By using the silver‐chloride stretching band as an internal standard, the adsorbate bands can be normalized in order to correct for the effects of focusing and aggregate size, which determine the number of SERS active sites in the focal area. This allows a quantitative use of SERS to be done. The adsorption–desorption of rhodamine 6G on TISNA films is reversible. These features make our TISNA films potential candidates for their use in chemical sensors based on the SERS effect. Copyright © 2008 John Wiley & Sons, Ltd.     

pH‐dependent surface‐enhanced Raman scattering observation of sulfanilamide on the silver surface

Monolayers of sulfanilamide on metallic surface can serve as an ideal model for understanding the interaction mechanism between the metal and the sulfanilamide molecule. In the present paper, the surface‐enhanced Raman scattering (SERS) technique was employed to obtain the SERS spectra of sulfanilamide monolayers formed on the silver surface under different pH values. Assignments of the spectra were carried out with the aid of density functional theory (DFT) calculations (BLYP/6‐311G). It can be found that the adsorption function of sulfanilamide on the silver surface was influenced by the pH value. The fully protonated sulfanilamide molecule adsorbed on the silver surface through N¹³H₂ group and the benzene ring anchored in a relatively perpendicular manner leading to N⁷H₂ and S¹⁰O₂ groups near the surface, while the completely deprotonated sulfanilamide molecule attached on the silver surface via N⁷H₂ and the benzene ring was perpendicular to, and the N¹³H₂ and S¹⁰O₂ groups were far from the silver surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Visible light response of silver 4‐aminobenzenethiolate and silver 4‐dimethylaminobenzenethiolate probed by Raman scattering spectroscopy

Silver thiolate is a layered compound with a Raman spectrum that is known to change with time, becoming the same as the surface‐enhanced Raman scattering (SERS) spectrum of the parent thiol molecule adsorbed on Ag nanoparticles. On this basis, the Raman scattering characteristics of silver 4‐aminobenzenethiolate (Ag‐4ABT) compounds were investigated to determine whether certain peaks that are identifiable in the SERS spectrum of 4‐aminobenzenethiol (4‐ABT) but absent in its normal Raman spectrum were also apparent in the Ag salt spectrum. For comparative purposes, the Raman scattering characteristics of silver 4‐dimethylaminobenzenethiolate (Ag‐4MABT) were also examined. Raman spectra acquired while spinning the sample were typified by only a₁‐type vibrational bands of Ag‐4ABT and Ag‐4MABT, whereas in the static condition, several non‐a₁‐type bands were identified. The spectral patterns acquired in the static condition were similar to the intrinsic SERS spectra of 4‐ABT or 4‐dimethylaminobenzenethiol (4‐MABT) adsorbed on pure Ag nanoparticles. Notably, the CH₃ group vibrational bands were observable for Ag‐4MABT irrespective of the sample rotation. In addition, no decrease in intensity during irradiation with a visible laser was observed for any of the bands, suggesting that no chemical conversion actually took place in either 4‐ABT or 4‐MABT. The preponderance of evidence led to the conclusion that the non‐a₁‐type bands observable in the SERS spectra must be associated with the chemical enhancement mechanism acting on the Ag nanoparticles. The chemical enhancement effect was more profound at 514.5 nm than at 632.8 nm, and was more favorable for 4‐ABT than 4‐MABT at both wavelengths. Copyright © 2012 John Wiley & Sons, Ltd.