Optical studies on ZnO films prepared by sol‐gel method

A standard sol‐gel method was used to deposit ZnO thin films of suitable thickness on glass substrate.The optical characteristics of the visible to infrared range on thermal stress were critically observed. Morphological signature of the films was detected by X‐ray diffraction (XRD) and the crystallite size determined by Scherrer method from XRD data were consistent with grain size estimated from spectroscopic data through Meulenkamp equation. The optical band gap value from the transmission spectrum was found to corroborate with the existing works. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Microstructural,optical and electrical properties of GeO2 thin films prepared by sol‐gel method

GeO₂ thin films were prepared by sol‐gel method on ITO/Glass substrate. The electrical and optical properties and the microstructures of these films were investigated with special emphasis on the effects of an annealing treatment in ambient air. The films were annealed at various temperatures from 500 °C to 700 °C. Structural analysis through X‐ray diffraction (XRD) and atomic force microscope (AFM) showed that surface structure and morphological characteristics were sensitive to the treatment conditions. The optical transmittance spectra of the GeO₂/ITO/Glass were measured using a UV‐visible spectrophotometer. All films exhibited GeO₂ (101) orientation perpendicular to the substrate surface where the grain size increased with increasing annealing temperature. The optical transmittance spectroscopy further revealed high transparency (over 70 %) in the wave range 400 – 800 nm of the visible region. At an annealing temperature level of 700 °C, the GeO₂ films were found to possess a leakage current density of 1.31×10^‐6A/cm² at an electrical field of 20 kV/cm. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth and characterization of Nd,Yb – yttrium oxide nanopowders obtained by sol‐gel method

Nanopowders of Y₂O₃ pure, doped and codoped by Nd³⁺, Yb³⁺ were obtained by sol‐gel method. Solution with ethylene glycol was choosed as the proper solution where crystallites of powder with Nd and Yb dopants had the same size. Finally the one‐phased compounds of Y₂O₃ doped 0.5 at% Nd and 1, 2 or 4 at% Yb were obtained. Grain growth and their morphology were investigated in various temperature and time of heating. The changes of crystallite sizes and lattice constants in relation to the heating time and temperature for the composition Y₂O₃ doped 0.5 at% Nd and 2 at% Yb are presented. Y₂O₃ containing 0,5 at% of Nd exhibits intense luminescence bands centered at 920 nm, 1100 nm and 1360 nm whereas a single band at about 1020 nm appears in samples co‐doped with neodymium and ytterbium. Luminescence spectra recorded did not depend on the sample preparation procedure and size of grains. OH impurity affects critically the relaxation dynamics of luminescent ion in nanopowders. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Phase‐manipulable synthesis of Cu‐based nanomaterials using ionic liquid 1‐butyl‐3‐methyl‐imidazole tetrafluoroborate

Using the ionic liquid (IL), 1‐butyl‐3‐methyl‐imidazole tetrafluoroborate, and the precursor Cu₇Cl₄(OH)₁₀·H₂O, series of phase‐manipulable Cu‐based nanomaterials were synthesized by hydrothermal and microwave assisted routes, respectively. The structural characters of the as‐prepared CuO, CuO/Cu₂O composites and pure Cu nanoparticles were investigated by XRD, SEM, TEM and HRTEM, and their surface photovoltaic properties were studied by surface photovoltage spectra. Via hydrothermal route Cu²⁺ ions were found to be reduced gradually into Cu⁺ and subsequently Cu⁰ with increasing the IL, and various phase ratio of CuO, Cu₂O and Cu composite nanosheets and pure Cu nanoparticles were obtained. This implies that the IL could function as both a reductant in the oxygen‐starved condition and a template for the nanosheet products. The ¹H‐NMR result of the IL supports it being a reductant. In microwave assisted route, however, only monoclinic single crystalline CuO nanosheets were obtained, which indicates the IL being a template only in oxygen‐rich condition. Therefore, the crystal phase, composition and morphology of the Cu‐based products could be controlled by simply adjusting the quantity of the IL and oxygen in solution routes. The molecular structure of the IL after oxidation reactions was investigated by ¹H‐NMR and a possible reaction mechanism was proposed. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Sintering behavior of ZnO:Al ceramics fabricated by sol‐gel derived nanocrystalline powders

ZnO:Al ceramics (Zn:Al, 0.95:0.05) were prepared by using sol‐gel derived nanocrystalline powders. XRD patterns of the doped ceramics revealed the existence of both zincite (JCPDS 36‐1451) and gahnite (JCPDS 5‐0669) phases. Gahnite phase (ZnAl₂O₄) was segregated along the ZnO grain boundaries. At the sintering temperature of 1200 °C, relative density of the undoped and Al doped ceramics were measured as 0.695 and 0.628, respectively. Both grain size and relative density of the ceramics decreased with Al doping. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optical and structural characterisation of zinc oxide thin films prepared by sol‐gel process

Zinc oxide thin films have been prepared on different substrates by the sol‐gel method using 2‐methoxyethanol solution of zinc acetate dihydrate stabilized by monoethanolamine. The photoluminescence spectra of the films show the band‐edge and sub‐band transitions. The intensity of the band edge emission peak increases, while the intensity of the deep level emission peak decreases in the films coated on sapphire substrate. Transmittance spectra show that the films are transparent beyond 400 nm. The structural property of the films has been evaluated using X‐ray diffraction. The X‐ray peak intensity of the film (002) grown on sapphire substrate is higher than the films grown on glass and quartz substrates. The AFM images show improvement in the surface of the annealed films as compared to the as‐grown ZnO films coated on sapphire substrates. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

X‐ray diffraction analysis of powder and thin film of (Gd1‐x Yx)2O3 prepared by sol‐gel process

The mixed oxide (Gd_1‐xY_x)₂O₃ (0.0 ≤ x ≤ 1.0) were synthesized, as powder and thin film, by a sol‐gel process. X‐ray diffraction data were collected and crystal structure and microstructure analysis were performed using Rietveld refinement method. All samples were found to have the same crystal system and formed solid solutions over the whole range of x. The cationic distribution, Gd³⁺ and Y³⁺, over the two non‐equivalent sites 8b and 24d of the space group Ia3 is found to be random for all values of (x). The lattice parameter is found to vary linearly with the composition (x). Replacing Gd³⁺ and Y³⁺ by each other introduces a systemic decrease in the x‐coordinate of cation position (24d) and slight changes in the oxygen coordinates. Crystallite size and microstrain analysis is performed along different crystallographic directions and anisotropic changes are found with the composition parameter (x). The average crystallite size ranges from 75 to 149 nm and the r.m.s strain from 0.027 to 0.068 x10^‐2. Textured Gd_1.841Y_0.159O₃ (400) buffer layers, with a high degree of alignment in both out‐plane and in‐plan, are successfully grown on cube textured Ni (001) tape substrates by sol–gel dip coating process. The resulting buffer layers are crack‐free, pinhole‐free, dense and smooth. YbBa₂Cu₃O_7‐x (YbBCO) thin film could be (00l) epitaxially grown on the obtained buffer layer using sol–gel dipping technique. (© 2007 WILEY ‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of different fuels on the alumina–zirconia nanopowder synthesized by sol–gel autocombustion method

In this research, a sol–gel autocombustion route has been proposed to synthesize alumina–zirconia nanopowder, using aluminium nitrate, zirconium oxychloride and various fuels such as citric acid, acetylacetone, oxalic acid and urea. The phase analysis and particle size in the presence of different fuel were compared. The results showed 100% tetragonal phase as well as particle size of 60 nm in the presence of citric acid. FTIR confirms the formation of -Al₂O₃ in corroboration with X-ray studies.     

Synthesis and characterization of fine lithium niobate powders by sol‐ gel method

Lithium niobate (LN) nanocrystal powders were prepared by low‐temperature sol‐gel method. Dihydrate lithium acetate as lithium source, and niobium chloride as niobium source were used as starting materials. The gel and powders were characterized by thermogravimetry and differential scanning calorimetry (TG/DSC), X‐ray diffraction (XRD), transmission electronmicroscopy (TEM) and Fourier transform infrared (FTIR) spectra. The results show that when the gel was heat‐treated at 600°C, the fine LN nanocrystals with the size of 40‐60 nm were obtained, and the size of the powders become larger with the heat‐treated temperature increasing. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Electrical properties of PbxSn1‐xS thin films prepared by hot wall deposition method

The Pb_xSn_1‐xS (x = 0 – 0.25) thin films were prepared on glass substrates by hot wall vacuum deposition. The films were polycrystalline monophase in nature and had orthorhombic crystal structure. The thickness of the films was about 2‐3 μm. The temperature dependences of the conductivity were measured in the temperature range from 150 to 420 K. The films revealed p‐type of conductivity. The Seebeck coefficient and conductivity values of the films was in the range of α = 6 – 360 μV/K and σ = 4.8×10^‐5 – 1.5×10^‐2 Ω^‐1·cm^‐1, respectively, at room temperature depending on concentration of the lead in the films. The lead atoms created the substitution defects Pb_Sn in the crystal lattice of the Pb_xSn_1‐xS. These defects formed the donor energy levels in the band gap. The activation energy of the films increased in the range ΔE_a = 0.121 – 0.283 eV with increasing of the lead concentration. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Properties and microstructure of silica glass incorporated with tributyl phosphate by sol–gel method

An organic phosphate species tributyl phosphate (TBP) was incorporated into sol–gel-derived glass matrix. TBP could be directly added to the hydrolyzed silica source from tetraethylorthosilicate (TEOS) and immobilized in silica glass matrix. TBP was stably immobilized in silica glass matrix even in the case where the weight ratio of TBP to silica was unity, and where the volume fraction of the glass sample occupied by TBP moiety was as large as 69%. The glass sample showed an appearance of hard glassy solid even at such a large fraction of TBP which is an organic solvent in the neat state at room temperature. The FT-IR spectrum showed that TBP was immobilized in silica glass in an intact state without chemical bonding with the siloxane network. The Vickers hardness was large enough even at higher weight ratios of TBP to silica to be measured as data indicating that the immobilized TBP molecules could play a promotive role in forming the siloxane bonding. The wide-angle X-ray scattering experiments revealed that the siloxane bonding was expanded by TBP molecules entrapped in the siloxane network. Furthermore, TBP molecules are dispersed in the siloxane network in the molecular scale.     

Synthesis and characterization of doped lithium aluminate nanocrystalline particles by sol‐gel method

Nanocrystalline particles of Co²⁺doped lithium aluminate (Co²⁺:LAO) and Ni²⁺‐doped lithium aluminate (Ni²⁺:LAO) were synthesized by sol–gel method. The crystalline nature and particle size of the samples were characterized by X‐ray diffraction analysis (XRD). The morphology and the presence Co²⁺ and Ni²⁺ in the synthesized samples were analyzed by scanning electron microscope (SEM) and energy dispersive X‐ray analysis (EDAX). The presences of functional groups in the samples were analyzed using FT‐IR analysis. The optical absorbance of the synthesized samples were observed using UV absorption spectral analysis. The frequency dependent dielectric behaviour of the synthesized nano materials was analyzed. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Co nanoclusters as origin of ferromagnetism in sol‐gel synthesized Zn1‐xCoxO (x = 0.05, 0.10 and 0.15) samples

We report on the structural and magnetic properties of the polycrystalline samples of Zn_1‐xCo_xO (x = 0.05, 0.10 and 0.15) synthesized via sol‐gel route. The air sintered samples of all compositions exhibit paramagnetic behaviour at room temperature, on the other hand the same samples on annealing in Ar/H₂ atmosphere show room temperature ferromagnetism (RTFM) with enhanced magnetization. The value of magnetization increases with the Co concentration (x) in both the air sintered and Ar/H₂ annealed samples. The observed ferromagnetism in the Ar/H₂ annealed Zn_1‐xCo_xO (x = 0.05, 0.10 and 0.15) samples is attributed to the presence of Co nanoclusters as detected by XRD and FESEM‐EDAX. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

High porosity silica xerogels prepared by a particulate sol–gel route: pore structure and proton conductivity

The lower cost and higher hydrophilicity of silica xerogels could make them potential substitutes for perfluorosulfonic polymeric membranes in proton exchange membrane fuel cells (PEMFCs). For that purpose, we need to obtain micro or micro and mesoporous silica xerogels with a high porosity. The preparation of micro (<2 nm) and micro and mesoporous silica xerogels (2<d_poresize10 nm) from particulate as oppossed to polymeric suspensions of silica using tetraethyl orthosilicate (TEOS) as precursor is used. Two techniques of varying packing density have been performed in this work: (1) Control of the aggregation degree in the sol by adjusting its pH before gelation (pH 5, 6 and 8) and (2) Mixture of sols with a different average particle size (particles formed under acid and base catalyzed reactions). Proton conductivity of the obtained xerogels was studied as a function of temperature and relative humidity (RH). High pore volume, high porosity and small pore size SiO₂ xerogels have been achieved in the calcination temperature range from 250 to 550 °C. The calcined xerogels showed microporosity or micro and mesoporosity in the whole range of calcination temperatures. By mixing sols (molar ratio: acid/base=4.8) porosities up to 54.7±0.1% are achieved, at 250 °C of firing temperature. According to EMF measurements, electrical transport is due to protons in this kind of materials. The proton conductivity of the studied xerogels increased linear with measured temperature. A S-shaped dependence of the conductivity with the RH was observed with the greatest increase noted between 58% and 81% RH. Xerogels with a low porosity (40.8±0.1%) and an average pore size less than 2.0 nm showed lower values of proton conductivity than that of xerogels with a higher porosity and a higher average pore size in the whole range of temperature and RH. When silica xerogels, with the highest conductivity, are treated at pH 1.5, that property increased from 2.84×10⁻³±5.11×10⁻⁵ S/cm to 4.0×10⁻³±7.2×10⁻⁵ S/cm, at 81% RH and 80 °C. It indicates that the surface site density of these materials has a strong effect on conductivity. Proton conductivity values achieved are less than one order of magnitude lower than that of Nafion, under the same conditions of temperature and RH.     

CIS and CIGS nanomaterials prepared by solvothermal method and their spectral properties

Uniform CIS and CIGS nanomaterials were successfully synthesized by a simple amino‐based assisted solvothermal technique using PVP‐30 as the surfactant. The influence of surfactant, temperature and Ga amount on the structure, morphology, phase and spectral property was analyzed in detail. The results show that CIS and CIGS nanomaterials with 40∼70 nm in diameter can be gained at 200 °C for 24 h. PVP‐30 surfactant can greatly improve the dispersion characteristics of particles. XRD pattern shows that the “three peaks” obviously shift to bigger 2θ after gallium implantation because of lattice contraction. EDAX and Raman show that the final product is close to CuIn_0.7Ga_0.3Se₂. The possible reaction mechanism has also been explained in detail. UV‐vis‐NIR spectra show that the absorption peak and absorption edge of CIGS with 1.278 eV bandgap obviously shift to a lower energy compared to CIS with 1.051 eV bandgap, which shows the potential application in enhanced conversion efficiency.     

Effect of annealing temperatures on properties of sol‐gel grown ZnO‐ZrO2 films

Mixed ZnO‐ZrO₂ films have been obtained by sol‐gel technology. By using spin coating method, the films were deposited on Si and glass substrates. The influence of thermal annealings (the temperatures vary from 400 °C to 750 °C) on their structural properties has been studied. The structural behavior has been investigated by the means of XRD and FTIR techniques. The results revealed no presence of mixed oxide phases, the detected crystal phases were related to the hexagonal ZnO and to crystalline ZrO₂. The sol‐gel ZnO‐ZrO₂ films showed polycrystalline structure with a certain degree of an amorphous fraction. The optical transmittance reached 91% and it diminished with increasing the annealing temperatures. The optical properties of the sol‐gel ZnO‐ZrO₂ films, deposited on glass substrates are excellent with high transparency and better then those of pure ZrO₂ films, obtained at similar technological conditions. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Structural and optical properties of TiO2:SnO2 thin films prepared by sol gel method

ABSTRACT

TiO₂:SnO₂ thin films were deposited on glass substrates, by using sol gel spin coating method with different ratio (3%, 5% and 7%) at 3200 rpm, to study their effect on different properties of TiO₂: SnO₂ thin films. The structural and optical properties of films have studied for different ratio. These deposited films have been characterized by various methods such as X-Ray Diffraction (XRD), Ultra Visible spectroscopy. The (XRD) can be used to identify crystal structure of as deposited films. The Transmission spectra have shown the transparent and opaque parts in the visible and UV wavelengths.     

Structural and optical properties of Mg‐doped ZnO thin films prepared by a modified Pechini method

ZnO thin films with different Mg doping contents (0%, 3%, 5%, 8%, 10%, respectively) were prepared on quartz glass substrates by a modified Pechini method. XRD patterns reveal that all the thin films possess a polycrystalline hexagonal wurtzite structure. The peak position of (002) plane for Mg‐doped ZnO thin films shifts toward higher angle due to the Mg doping. The crystallite size calculated by Debey‐Scherrer formula is in the range of 32.95–48.92 nm. The SEM images show that Mg‐doped ZnO thin films are composed of dense nanoparticles, and the thickness of Mg‐doped ZnO thin films with Mg doped at 8% is around 140 nm. The transmittance spectra indicate that Mg doping can increase the optical bandgap of ZnO thin films. The band gap is tailored from 3.36 eV to 3.66 eV by changing Mg doping concentration between 3% and 10%. The photoluminescence spectra show that the ultraviolet emission peak of Mg‐doped ZnO thin films shifts toward lower wavelength as Mg doping content increases from 3% to 8%. The green emission peak of Mg‐doped ZnO thin films with Mg doping contents were 3%, 8%, and 10% is attributed to the oxygen vacancies or donor‐acceptor pair. These results prove that Mg‐doped ZnO thin films based on a modified Pechini method have the potential applications in the optoelectronic devices.     

Structural and magnetic properties of nanometric Zn0.5Co0.5Fe2O4 prepared by hydrothermal method

ABSTRACT

The study of the structural, morphology and magnetic properties of Zn_0.5Co_0.5Fe₂O₄ ferrite is the objective of this work. The sample was prepared by hydrothermal method and was characterized by X-ray diffraction (XRD), (SEM) and (TEM) micrographs and magnetization measurements.

The magnetic hysteresis loops, field cooling (FC) and zero field cooling (ZFC) curves, in temperature range (0-400K), were measured using XL-SQUID magnetometer and the values of blocking temperatures (T_B) were determined. The results indicated that Zn_0.5Co_0.5Fe₂O₄ sample were formed in a single spinel phase and gives the value for the lattice parameter (8.3952 Å) and nanosizes of particles (13.8 nm) were compared with these obtained from ZnFe₂O₄ sample prepared also by synthesis method (8.4261 Å and 14 nm). Although, the superparamagnetic behaviour for Co-Zn ferrite has observed at 350K with a blocking temperature (T_B = 300K), that is maximum at the value obtained in the case of Zn-ferrite (T_B = 12K).     

A new method for fabricating water repellent silica films having high heat-resistance using the sol–gel method

There has been a great demand in the field of kitchen appliances to develop transparent water repellent films which have high heat-resistance around 300°C. However, those films have not been obtained by conventional sol–gel methods. In this paper, we propose a new method for fabricating transparent water repellent films with high heat-resistance using the sol–gel method, in which silicon or germanium substrates were coated with a solution including tetraethoxysilane (Si(OC₂H₅)₄) and (2-perfluorooctyl)ethyltrimethoxysilane (CF₃(CF₂)₇C₂H₄Si(OCH₃)₃), followed by ‘ammonia-treatment' and annealed at 300°C. The contact angles of water on the ammonia-treated film maintained its initial value, 110° after the heat treatment at 300°C for 250 h while those on the untreated film decreased to 70°, indicating that the ammonia-treatment improves heat-resistance on the film. The mechanism of ammonia-treatment was inferred from FT-IR results; the ammonia-treatment should accelerate hydrolysis and polymerization of FAS and TEOS molecules, resulting in high density of siloxane bonds between FAS and silica glass. These bonds suppress the evaporation of FAS molecules from the film during the heat treatment at 300°C, thus the film has high heat-resistance.