Modification of Polysaccharides Through Controlled/Living Radical Polymerization Grafting—Towards the Generation of High Performance Hybrids

This review covers the literature concerning the modification of polysaccharides through controlled radical polymerizations (NMP, ATRP and RAFT). The different routes to well‐defined polysaccharide‐based macromolecules (block and graft copolymers) and graft‐functionalized polysaccharide surfaces as well as the applications of these polysaccharide‐based hybrids are extensively discussed.

     

Supramolecular Assembly of Gold Nanoparticles Mediated by Polypseudorotaxane with Thiolated β‐Cyclodextrin

Summary: A water‐soluble gold nanoparticle aggregate 2 was prepared by chloroauric acid and a polypseudorotaxane 1 of mono‐6‐thio‐β‐cyclodextrin with poly(propylene glycol) bis(2‐aminopropyl ether) ( ≈ 2 000) in the presence of sodium borohydride in N,N‐dimethylformamide (DMF) solution. The investigative results indicated that the gold nanoparticle aggregate 2 might act as an efficient DNA‐cleavage reagent.

A typical TEM image of gold nanoparticle aggregate 2 .     

New Star‐Shaped Metallo‐Polymeric Chromophores

The synthesis of new star‐shaped polymers, prepared by atom transfer radical polymerization of methyl methacrylate with tris(dialkylaminostyryl‐2,2′‐bipyridine) zinc(II) and iron(II) metalloinitiators, is reported. Their thermal and optical (absorption and emission) properties are discussed.

Structure of the star‐shaped polymers.     

Synthesis of Branched Polyglucans by the Tandem Action of Potato Phosphorylase and Deinococcus geothermalis Glycogen Branching Enzyme

An enzymatic tandem reaction is described in which the enzymes phosphorylase and Deinococcus geothermalis glycogen branching enzyme (Dg GBE) catalyze the synthesis of branched polyglucans from glucose‐1‐phosphate (G‐1‐P). Phosphorylase consumes G‐1‐P and polymerizes linear amylose while Dg GBE introduces branching points on the α‐(1 → 6) positions by reshuffling short oligosaccharides. The resulting branched polyglucans have an unusually high degree of branching of 11%.

     

Fluorescence Investigations of Oxygen‐Doped Simple Amine Compared with Fluorescent PAMAM Dendrimer

Blue emission of oxygen‐doped tertiary amine (triethylamine), a key unit of fluorescent poly(amido amine) dendrimer, was demonstrated. It was found that the fluorescence intensity could be further enhanced if the tertiary amines locate densely in the dendrimer interior as the branching sites. Moreover, a solvatochromic phenol blue, instead of oxygen, is able to induce the blue fluorescence of the tertiary amino‐branching sites based on a guaranteed host‐guest complexation of phenol blue molecules and dendrimer interior.

     

Automated Parallel Temperature Optimization and Determination of Activation Energy for the Living Cationic Polymerization of 2‐Ethyl‐2‐oxazoline

Sixteen parallel polymerization reactions of 2‐ethyl‐2‐oxazoline have been performed at different temperatures in an automated synthesizer that allowed individual heating of each reactor. During the reactions samples were taken automatically, which were characterized by means of both online GPC and offline GC, in order to optimize the reaction temperature and to determine the activation energy of the polymerization.

     

A Composite Polymer Film with both Superhydrophobicity and Superoleophilicity

Summary: A composite film composed of porous polyurethane (PU) and polystyrene (PS) microspheres with both superhydrophobicity and superoleophilicity has been prepared. In this film, the dual‐scale structure enhances both the hydrophobicity and oleophilicity of the surface material. The composite film with such an ‘intelligent’ wettability property can be utilized to separate oil and water systems efficiently.

The composite film can be used to separate diesel oil and water.     

Synthesis and Surface Morphology of Tetraaniline‐block‐Poly(L‐lactate) Diblock Oligomers

Summary: Tetraaniline‐block‐poly(L ‐lactide) diblock oligomers are synthesized via ring‐opening polymerization. The diblock oligomers cast from an L ‐lactide selective solvent (chloroform) show spherical aggregates for the leucoemeraldine state, and ring‐like structures that are composed of much smaller spherical aggregates for the emeraldine state. The formation mechanisms of the two different surface morphologies are discussed in detail.

Surface morphology changes induced by oxidation of the aniline segment of tetraaniline‐block‐poly(L ‐lactate) and drying effects.     

Free Volume and Swelling in Thin Films of Poly(N‐isopropylacrylamide) End‐Capped with n‐Butyltrithiocarbonate

The free volume in thin films of poly(N‐isopropylacrylamid) end‐capped with n‐butyltriocarbonate (nbc‐PNIPAM) is probed with positron annihilation lifetime spectroscopy (PALS). The PALS measurements are performed as function of energy to obtain depth profiles of the free volume of nbc‐PNIPAM films. The range of nbc‐PNIPAM films with thicknesses from 40 to 200 nm is focused. With decreasing film thickness the free volume increases in good agreement with an increase in the maximum swelling capability of the nbc‐PNIPAM films. Thus in thin hydrogel films the sorption and swelling behavior is governed by free volume.

     

Water‐Soluble Conjugated Polymers for Fluorescent‐Enzyme Assays

Enzyme assays are receiving more and more research and application interest because of the rapidly increasing demands of clinical diagnosis, environmental analysis, drug discovery, and molecular biology. Water‐soluble light‐harvesting conjugated polymers (CPs) coordinate the action of a large number of absorbing units to afford an amplified fluorescence signal, which makes them useful as optical platforms in highly sensitive chemical and biological sensors. This Feature Article highlights recent developments of water‐soluble CPs for fluorescent assays of enzymes. Different signal transduction mechanisms, such as electron transfer, fluorescence resonance energy transfer (FRET), and aggregation or conformation changes of CPs, are employed in these assays according to the dissimilar nature of enzymes. Potential challenges and future research directions in these approaches based on CPs are also discussed.

     

Solvent Controlled Multi‐Morphological Self‐Assembly of Amphiphilic Graft Copolymers

Summary: Amphiphilic graft polyphosphazenes (EtTrp/PNIPAm‐PPP) with different mole ratios of hydrophobic groups to hydrophilic segments were synthesized by ring‐opening polymerization and subsequent substitution reactions. The self‐assembly behavior of these graft copolymers was studied in detail by TEM, SEM, CLSM, and AFM. Depending on the copolymer composition and common organic solvent employed in dialysis process, supramolecular aggregates ranging from network, nanospheres, high‐genus particles to macrophage‐like aggregates were produced with graft copolymers.

     

A High‐Content Diarylethene Photochromic Polymer for an Efficient Fluorescence Modulation

Summary: A highly fluorescent photochromic polymer, poly‐BTFO4, was prepared. The fluorescence quantum yield of the poly‐BTFO4 was six times higher than that of BTFO4. Fatigue resistance of the polymer at its photostationary state was significantly enhanced compared with that of BTFO4. Importantly, the poly‐BTFO4 film also showed an efficient photochromism as well as strong fluorescence similar to the results in solution, which allow photoinduced fluorescence switching applicable to optical switches.

Improvement of fluorescence quantum yield and fatigue resistance.     

Conjugated Microporous Networks on the Basis of 2,3,5,6‐Tetraarylated Diketopyrrolo[3,4‐c]pyrrole

π‐Conjugated microporous networks have been prepared from the tetraarylated diketopyrrolo[3,4‐c]pyrrole unit as a tetrafunctional building block. The reactions are carried out using microwave‐assisted Yamamoto or Sonogashira cross‐coupling. Red insoluble powders are obtained, showing intense fluorescence. The polymer networks exhibit a high gas storage capability, with BET surface areas up to about 500 m² · g⁻¹.

     

Addition‐Fragmentation Chain Transfer Involving Dimers of α‐Methylvinyl Monomers Studied by ESR Spectroscopy: Competition between Fragmentation and Bimolecular Termination

Detection of the adduct radical by ESR spectroscopy and after‐effect ESR measurements of the adduct radical concentrations in the photosensitized polymerization of styrene (St) in the presence of dimers of α‐methylstyrene (MSD) and methyl methacrylate have revealed that the dominant mechanism of adduct radical loss changes from bimolecular termination to fragmentation as the temperature is increased beyond 90 °C for St/MSD.

     

A Lipase‐Responsive Vehicle Using Amphipathic Polymer Synthesized with the Lipase as Catalyst

We describe an enzyme‐responsive polymeric vehicle, which is of great interest in controlled drug delivery, biosensing, and other related areas. The polymer synthesized using lipase as catalyst in DMSO has a favorable molecular structure that is quickly hydrolyzed by lipase in aqueous phase, and allows a fast release of encapsulated molecules.

     

Insertion of Copper(II)/Schiff‐Base Complexes with NLO Properties into Commercial Polycarbonates by Thermal Processes

The preparation of a bisphenol‐A carbonate copolymer, containing Cu‐diimine units with nonlinear optical (NLO) properties, and its MALDI‐TOF mass spectrometric characterization are reported. Contrary to the usual synthetic method, NLO groups were inserted directly into a commercial polycarbonate by prolonged heating at 250 °C. This innovative procedure allows to obtain a Cu/diimine‐containing polymer of high molecular weight.

     

Synthesis of Polyaniline Nanobelts

Summary: Polyaniline nanobelts have been synthesized by a self‐assembly process using the chemical oxidative polymerization of aniline in a surfactant gel. The morphologies of polyaniline nanostructures were characterized by field‐emission scanning electron microscopy and transmission electron microscopy. The effects of the concentrations of cetyltrimethylammonium bromide on the morphologies of polyaniline nanostructures have also been investigated.

A scanning electron microscopy image of polyaniline nanobelts synthesized with 0.12 M cetyltrimethylammonium bromide at −7 °C.