Functional benzoxazines containing ammonium salt of carboxylic acid: Synthesis and highly activated thermally induced ring‐opening polymerization

1,3‐Benzoxazine monomers having ammonium salt of carboxylic acid have been developed. These 1,3‐benzoxazines 1a and 1b were easily synthesized from the corresponding tetrabutylammonium salts of glycine and β‐alanine, respectively. The glycine‐derived benzoxazine 1a exhibited remarkably high reactivity, which allowed its thermally induced ring‐opening polymerization in bulk at 100 °C, at which N‐methyl‐1,3‐benzoxazine 1d did not undergo the polymerization at all. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Rheological behavior and microstructure of 2,2′‐dioxy‐ 1,1′‐binaphthylphosphazene R/S random copolymer

Solutions of a binaphthoxy phosphazene copolymer (containing chiral 2,2′‐dioxy‐1,1′‐binaphthyl units with 50% R and S configurations distributed along the chains) in N‐methyl pyrrolidone were studied by means of continuous flow experiments and small amplitude oscillatory flow tests. A sudden viscosity decrease was observed in the polymer concentration range (39–40 wt %), evidencing a liquid‐crystalline polymer behavior. This has been confirmed by other rheological methods which have demonstrated that, for a sufficiently high concentration, the solutions of the binaphthoxy phosphazene copolymer give rise to a lyotropic system with formation of rigid rods (axial ratio of 10) stacked parallel to each other. The lyotropic properties of our binaphthoxy phosphazene copolymer are compatible with a regular helical structure, similar to that found for a homoleptic binaphthoxy phosphazene, which contains only S configuration. This suggests that the chains of 50% R/S binaphthoxy phosphazene copolymer are, in average, close to the strictly alternating R‐S copolymeric structure of the syndiotactic isomer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Kinetic study of H‐atom transfer in imidazoline‐, imidazolidine‐, and pyrrolidine‐based alkoxyamines: Consequences for nitroxide‐mediated polymerization

The H‐atom transfer reaction was studied for a series of imidazoline, imidazolidine, and pyrrolidine‐based alkoxyamines containing either isobutyrate‐2‐yl or 1‐phenylethyl alkyl fragments. The C O bond homolysis rate constants and activation energies were determined by ¹H NMR product analysis as a function of temperature. Inter‐ and intramolecular H‐atom transfer reactions were distinguished by examination of alkoxyamine thermolysis products in the absence and in the presence of a radical scavenger (thiophenol or deuterated styrene). A correlation between the structure of the nitroxyl fragment of alkoxyamine and the H‐transfer reaction was found. The high steric demands of the substituents on the nitroxyl part of the isobutyrate‐2‐yl alkoxyamine decrease both types of reaction. For alkoxyamines containing the 1‐phenylethoxyamines, neither inter‐ nor intramolecular H‐atom transfer was observed. Controlled polymerization of methylmethacrylate initiated with imidazoline‐based alkoxyamine was observed, although the polymer obtained was not living. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6579–6595, 2009     

Organophosphine syntheses via activation of the phosphorus‐silicon bond of silylphosphines

This paper describes the recent advances in the syntheses of organophosphines by forming several types of phosphorus‐carbon bonds via activation of the phosphorus‐silicon bond of silylphosphines. In this account, the activation methods are classified into three types: nucleophile‐induced activations, reactions with Lewis acid‐activated electrophiles, and transition metal catalyzed reactions. Nucleophile‐induced activations of silylphosphines, especially by a fluoride, generated a reactive phosphide equivalent for selective formation of a P‐C bond. Silylphosphines also reacted selectively with Lewis acid‐activated electrophiles. The Lewis acid mediated/catalyzed additions and substitutions, to form sp³‐carbon‐phosphorus bonds including an asymmetric reaction, are described. Several important types of transition metal catalyzed reactions of silylphosphines are also mentioned in this account. Selective formation of a P‐C bond is achieved through these activations to produce a variety of functional organophosphines including optically active ones. © 2009 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Chem Rec 9: 236–245; 2009: Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.200900011     

Cycloaddition of N‐(2,2,2‐trichloroethylidene)‐substituted carboxamides and carbamates to 1,2,4‐thiadiazol‐5(2H)‐imines

1,2,4‐Thiadiazol‐5(2H)‐imines 4 react with N‐(2,2,2‐trichloroethylidene)‐substituted amides 5 to form [3 + 2]‐cycloaddition products 6 featured by an extra coordination of the ring sulfur atom to the terminal nitrogen atom of the side 1,3‐diazapropenylidene group, as established by X‐ray diffraction investigation. This coordination evidently plays an important role in the alkylation of compounds 6 into 8 at the oxygen atom under mild conditions. The S N bond “switch‐over” restoring the original 1,2,4‐thiadiazole ring occurs therewith. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:474–480, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10182     

Synthesis and quantitative structure–activity relationship of a new series of chiral 4‐alkoxycarbonyl‐2‐(alkylamino)‐1,3,2‐oxa or thiazaphospholidine‐2‐ones

Twenty‐one of the chiral 4‐alkoxycarbonyl‐2‐(α‐alkyl‐α‐ethoxycarbonyl methylamino)‐1,3‐2‐thia or oxazaphospholidine‐2‐ones have been synthesized by cyclization of L‐serine or L‐cysteine ethyl or n‐octyl ester with phosphoryl chloride followed by reaction with a suitable L‐amino acid ethyl ester. Proton NMR, IR, and mass spectra of these compounds have been discussed in detail. These compounds inhibited up to 68.52% of acetylcholinesterase (AChE) at the 1 ppm concentration level. Regression analysis showed that AChE inhibition was determined by both the steric and electronic effects of the alkyl groups of the amino acid. The enzyme inhibition correlated directly with the steric bulk of the alkyl groups, indicating a steric requirement for maximizing inhibitor–enzyme interaction and an inverse relationship with the electron‐donating ability of the alkyl groups. This supports the concept of a nucleophilic attack mechanism of a hydroxyl group of a serine amino acid in the enzyme active center on the partially positive phosphorus atom of the oxazaphospholidines and thiazaphospholidines, with correlation coefficients of 0.999 and 0.838, respectively. Results also indicated that the steric requirement was more important than the electronic factor in affecting the inhibition process, which explained the high activity of compounds containing the isoleucine moiety. The high AChE inhibition activity of these compounds and the expected nontoxic products of their in vivo hydrolysis make them eligible for pesticidal application. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 475–480, 1999     

A convenient one‐pot synthesis of 1,2‐azaphospholanium salts

A novel facile one‐pot synthesis of the 1,2‐azaphospholanes by intramolecular alkylation of 3‐halopropyl amides of tricoordinate phosphorus has been suggested. Using this method, a series of the differently N‐substituted 1,2‐azaphospholanium salts were synthesized. 3‐Aminopropylphosphine oxides were obtained by hydrolysis of the salts. A probable mechanism of the 1,2‐azaphospholanium salts formation is discussed. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:596–602, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10209     

Synthesis of novel 1,3‐substituted 1H‐[1,2,4]‐triazole‐3‐thiol derivatives

By means of regioselective S‐alkylation of 1H‐1,2,4‐triazole‐3‐thiol ( 1 ), a series of S‐substituted derivatives 2a‐j were synthesized. In certain conditions, the reaction of 2 with arylsulfochlorides, arylisocyanates, and quaternary ammonium salts of azines corresponding compounds were obtained 1‐arylsulfonyl‐ (3a‐d) , 1‐arylcarbonamido‐ ( 4a,b ), and 1‐azinyl‐1,2,4‐ ( 6a‐p ) triazoles. Structures of compounds were confirmed by ¹H NMR and elemental analyses. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 20:405–410, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20565     

Synthesis,structure, and fungicidal activity of triorganotin (4H‐1,2,4‐triazol‐4‐yl)benzoates

A series of triorganotin (4H‐1,2,4‐triazol‐4‐yl)benzoates have been synthesized by the reaction of 4‐(4H‐1,2,4‐triazol‐4‐yl)benzoic acid and 3‐(4H‐1,2,4‐triazol‐4‐yl)benzoic acid with (R₃Sn)₂O (R = Et, n‐Bu and Ph) or R′₃SnOH (R′ = p‐tolyl and cyclohexyl). The molecular structure of tri(p‐tolyl)tin 3‐(4H‐1,2,4‐triazol‐4‐yl)benzoate determined by X‐ray crystallography displays that the tin atom adopts a five‐coordinate distorted trigonal bipyramidal geometry with the carboxyl oxygen atom and the nitrogen atom on 1‐position of triazole ring occupying the apical position. Moreover, this complex forms a polymeric chain by the intermolecular Sn–N interactions. All these complexes show good antifungal activities in vitro against Alternaria solani, Cercospora arachidicola, Gibberella zeae, Physalospora piricola, and Botrytis cinerea. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 20:411–417, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20566     

Novel quaternary ammonium borates as latent catalysts for epoxy–phenolic resins

Novel tetrabutylammonium tetrakis(substituted benzoyloxy)borate salts ( 1a – 1d ) were synthesized by the reaction of tetrabutylammonium tetraphenylborate and corresponding substituted benzoic acids. Polyaddition reactions of diglycidyl ether of bisphenol A (DGEBA) and 4,4′‐bisphenol F (44BPF) or bisphenol F (BPF‐D) with the ammonium borates were investigated as model reactions of epoxy/phenol–novolac resin systems with respect to the thermal latency and storage stability of the catalyst. The polyaddition of DGEBA/44BPF with the ammonium borates in diglyme at 150 °C for 6 h proceeded up to 84–94% conversions and gave polymers with number‐average molecular weights of 3750–5750, whereas the polyaddition at 80 °C for 6 h gave less than 9% conversions. The catalytic activity of ammonium borates 1a – 1d depended on the substituent of the phenyl group of the borates, and the order of activity was 1b (p‐OMe) > 1a (? H) > 1c (p‐NO₂) > 1d [3,5‐(NO₂)₂]. The ammonium borate catalyst with the substituent that yielded lower acidity of the corresponding substituted benzoic acid tended to reveal higher activity. In comparison with tetrabutylammonium bromide (TBAB) as a conventional ammonium salt, 1a – 1d revealed better thermal latency. The storage stability of DGEBA/BPF‐D with the ammonium borate catalysts in bulk at 40 °C was better than that with TBAB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2689–2701, 2002     

Synthesis and characterization of ether derivatives of brominated poly(isobutylene‐co‐isoprene)

Variations of the Williamson ether synthesis were employed to prepare a range of new derivatives of brominated poly(isobutylene‐co‐isoprene) (BIIR). Unambiguous characterization of the polymeric products was accomplished by spectroscopic comparisons to low‐molecular‐weight analogues derived from brominated 2,2,4,8,8‐pentamethyl‐4‐nonene, which served as a model for the reactive functionality found within BIIR. The substitution of bromide from BIIR occurred at moderate temperatures with stoichiometric amounts of quaternary ammonium phenoxide to yield O‐alkylation products in high yields. Simple mixtures of BIIR, KOH, and aliphatic alcohols generated the desired allylic ethers when heated above 110 °C in the absence of quaternary ammonium salts. Knowledge gained from these small‐molecule alkylations was used to prepare graft copolymers from BIIR and poly(ethylene oxide) through the exploitation of the apparent ability of polyethers to activate potassium alkoxides in nucleophilic substitutions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 983–992, 2006     

Efficient Conversion of Carbon Dioxide with Si‐Based Reducing Agents Catalyzed by Metal Complexes and Salts

Homogeneous metal complex and salt catalysts were developed for the reductive transformation of CO₂ with Si‐based reducing agents. Cu‐bisphosphine complexes were found to be excellent catalysts for the hydrosilylation of CO₂ with polymethylhydrosiloxane (PMHS). The Cu complexes also showed high catalytic activity and a wide substrate scope for formamide synthesis from amines, CO₂, and PMHS. Simple fluoride salts such as tetrabutylammonium fluoride acted as good catalysts for the reductive conversion of CO₂ to formic acid in the presence of hydrosilane, disilane, and metallic Si. Based on the kinetics, isotopic experiments, and in‐situ NMR measurements, the reaction mechanism for both catalyst systems, the Cu complex and the fluoride salt, have been proposed.     

Deep eutectic solvents as both active fillers and monomers for frontal polymerization

The deep eutectic solvents (DESs) based on the mixtures of a variety of ammonium salts and hydrogen bond donors containing acrylic acids and acrylamides are capable of sustaining frontal polymerization (FP). The selection of ammonium salt affects the reactivity and allows FP at relatively low temperature but with full conversion. Also, full conversion allows us to use these polymers for biomedical applications (e.g., drug delivery systems) as the unreactive ammonium salts can be released from the resulting polymer without by‐products. We call these components “active fillers,” which can be ammonium salts with biological or pharmaceutical importance. For instance, we prepared poly(acrylic acid) loaded with lidocaine hydrochloride (a common anesthetic), the release of which was found to occur in a controlled fashion. The ammonium salts also create a sufficiently high viscosity to suppress buoyancy‐driven convection without additional materials. The DES here described played an all‐in‐one role, providing the monomer, the active filler, and the polymerization medium for FPs. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Incorporation of poly(2‐acrylamido‐2‐methyl‐N‐propanesulfonic acid) segments into block and brush copolymers by ATRP

2‐Acrylamido‐2‐methyl‐N‐propanesulfonic acid (AMPSA) was successfully polymerized via atom transfer radical polymerization (ATRP) using a copper chloride/2,2′‐bipyridine (bpy) catalyst complex after in situ neutralization of the acidic proton in AMPSA with tri(n‐butyl)amine (TBA). A 5 mol % excess of TBA was required to completely neutralize the acid and prevent protonation of the bpy ligand, as well as to avoid side reactions caused by large excess of TBA. The use of activators generated by electron transfer (AGET) ATRP with ascorbic acid as reducing agent resulted in both increased conversion of the AMPSA monomer during polymerization (up to 50% with a 0.8 [ascorbic acid]/[Cu(II)] ratio) and much shorter polymerization times (<30 min). Block copolymers and molecular brushes containing AMPSA side chains were prepared using this method, and the solution and surface behavior of these materials were investigated. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5386–5396, 2009     

Amphiphilic polymer electrolytes consisting of PVC‐g‐POEM comb‐like copolymer and LiCF3SO3

An amphiphilic comb‐like copolymer consisting of a poly(vinyl chloride) (PVC) backbone and poly((oxyethylene)₉ methacrylate) (POEM) side chains, PVC‐graft‐POEM was synthesized via atom transfer radical polymerization. This comb copolymer was complexed with LiCF₃SO₃ to form a solid polymer electrolyte. FTIR and FT‐Raman spectroscopy indicate that lithium salts are dissolved in the ion conducting POEM domains of microphase‐separated graft copolymer up to 10 wt % of salt concentration. Microphase‐separated structure of the materials and the selective interaction of lithium ions with POEM domains were revealed by transmission electron microscopy, wide angle X‐ray scattering, and differential scanning calorimetry. The maximum ionic conductivity of 4.4 × 10^?5 S/cm at room temperature was achieved at 10 wt % of salt concentration, above which salts are present as less mobile species such as ion pairs and higher order ionic aggregates, as characterized by FT‐Raman spectroscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1443–1451, 2009     

Derivatives of α‐ and β‐S‐thiophosphates of 2‐bromo‐2‐deoxy‐D‐hexopyranose

The first examples of S‐thiophosphate derivatives of 2‐bromo‐2‐deoxy sugars 7–12 were synthesized by reacting alkyl ammonium salts 1–4 of thiophosphoric acids with α‐1,2‐cis (5) or α‐1,2‐trans dibromo sugars (6) and addition of free thiophosphoric acids 1a or 2a to 2‐bromo‐D‐glucal (13). It was observed that the solvent determines formation of either the O‐ or S‐glycosyl compound. β‐Thiophosphates can be transformed to the α‐configuration in the presence of acid in quantitative yield. The structures of the synthesized derivatives of 7–12 were confirmed by spectroscopic methods. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 465–470, 1999     

Enantioselective Synthesis of AG‐041R by using N‐Heteroarenesulfonyl Cinchona Alkaloid Amides as Organocatalysts

The organocatalytic enantioselective decarboxylative addition of malonic acid half thioesters to ketimines derived from isatins by using N‐heteroarenesulfonyl cinchona alkaloid amides afforded products with high enantioselectivity. The products could be converted into optically active AG‐041R. X‐ray crystallographic analysis revealed that the hydrogen bonding between the sulfonimide proton and the 8‐quinolyl nitrogen atom plays an important role in exerting the enantioselectivity of the reaction.     

Synthesis and properties of phosphorus containing polyester‐amides derived from 1,4‐bis(3‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl) phenylene

A series of polyester‐amides that contain phosphorus were synthesized by low temperature solution condensation of 1,4‐bis(3‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl) phenylene (III) with various aromatic acid chlorides in N‐methyl pyrrolidone (NMP). All polyester‐amides are amorphous and readily soluble in many organic solvents such as dimethylacetamide (DMAc), NMP, dimethylsulfoxide, and dimethylformamide at room temperature or on heating. Light yellow and flexible films of these polyester‐amides could be cast from the DMAc solutions. The polymers with an inherent viscosity of 0.26–0.72 dL/g were obtained in quantitative yields. These polyester‐amides have good mechanical properties (G′ of ∼ 10⁹ Pa up to 200°C) and good thermal and flame retardant properties. The glass transition temperatures of these polyester‐amides ranged from 250 to 273°C. The degradation temperatures (T_d 5%) in nitrogen ranged from 466 to 478°C and the char yields at 800°C were 59.6–65.2%. The limiting oxygen indexes of these polyester‐amides ranged from 35 to 43. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 891–899, 1999     

Mapping the characteristics of the radical ring‐opening polymerization of a cyclic ketene acetal towards the creation of a functionalized polyester

Radical ring‐opening polymerization of cyclic ketene acetals is a means to achieve novel types of aliphatic polyesters. 2‐methylene‐1,3‐dioxe‐5‐pene is a seven‐membered cyclic ketene acetal containing an unsaturation in the 5‐position in the ring structure. The double bond functionality enables further reactions subsequent to polymerization. The monomer 2‐methylene‐1,3‐dioxe‐5‐pene was synthesized and polymerized in bulk by free radical polymerization at different temperatures, to determine the structure of the products and propose a reaction mechanism. The reaction mechanism is dependent on the reaction temperature. At higher temperatures, ring‐opening takes place to a great extent followed by a new cyclization process to form the stable five‐membered cyclic ester 3‐vinyl‐1,4‐butyrolactone as the main reaction product. Thereby, propagation is suppressed and only small amounts of other oligomeric products are formed. At lower temperatures, the cyclic ester formation is reduced and oligomeric products containing both ring‐opened and ring‐retained repeating units are produced at higher yield. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4587–4601, 2009     

2‐Benzothiazolyl‐N‐(arenesulfonyl)‐sulfinimidoyl fluorides

2‐Benzothiazolyl‐N‐(arenesulfonyl)‐sulfinimidoyl fluorides were synthesized by the treatment of benzothiazolyl‐2‐sulfur trifluoride with sulfonamides. The reaction of 2‐benzothiazolyl‐N‐ (p‐toluenesulfonyl)‐sulfinimidoyl fluoride with tert‐ butylamine and morpholine gave 2‐benzothiazolyl‐ N‐(arenesulfonyl)‐sulfinimidoyl amides. The reaction of 2‐benzothiazolyl‐N‐(p‐toluenesulfonyl)‐sulfinimi‐ doyl fluoride or 2‐benzothiazolyl‐¹⁵N‐(p‐tosyl)sul‐ finimidoyl fluoride with S‐trimethylsilylbenzenethiol gave di(benzothiazolyl‐2) disulfide, fluorotrimethylsi‐ lane and N,N′‐bis(p‐toluenesulfonyl)‐N,N′‐bis(phenyl‐ thio)‐hydrazine or ¹⁵N,¹⁵N′‐bis(p‐toluenesulfonyl)‐¹⁵N, ¹⁵N′‐bis(phenylthio)‐hydrazine, respectively. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:352–356, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20102