Mechanism of Dithiobenzoate‐Mediated RAFT Polymerization: A Missing Reaction Step

Summary: The debate on the mechanism of dithiobenzoate‐mediated RAFT polymerization may be resolved by including the reaction between a propagating radical and the star‐shaped combination product from irreversible termination into the kinetic scheme. By this step, a highly reactive propagating radical and a not overly stable three‐arm star species are transformed into the resonance‐stabilized RAFT intermediate radical and a very stable polymer molecule. The time evolution of concentrations is discussed for the main‐equilibrium range of CDB‐mediated methyl acrylate polymerization.

Illustration of the novel understanding of the RAFT mechanism in dithiobenzoate‐mediated RAFT polymerization.     

Acid‐Degradable Core‐Crosslinked Micelles Prepared from Thermosensitive Glycopolymers Synthesized via RAFT Polymerization

A thermoresponsive block copolymer, namely poly(acryloyl glucosamine)‐block‐poly(N‐isopropylacryamide) (PAGA₁₈₀‐b‐PNIPAAM₃₅₀) was simultaneously self‐assembled and crosslinked in aqueous medium via RAFT polymerization at 60 °C to afford core‐crosslinked micelles exhibiting a glycopolymer corona and a PNIPAAM stimuli‐responsive core. An acid‐labile crosslinking agent, 3,9‐divinyl‐2,4,8,10‐tetraoxaspiro[5.5]undecane, was employed to generate thermosensitive and acid‐degradable core‐shell nanoparticles. Stable against degradation at pH = 6 and 8.2, the resulting core crosslinked micelles readily hydrolyzed into well‐defined free block copolymers at lower pH (30 min and 12 h respectively at pH = 2 and 4).

     

Laser Single Pulse Initiated RAFT Polymerization for Assessing Chain‐Length Dependent Radical Termination Kinetics

Summary: A novel method combining RAFT polymerization with pulsed‐laser initiation for determining chain‐length dependent termination rate coefficients, k_t, is presented. Degenerative chain‐transfer in RAFT enables single‐pulse pulsed‐laser polymerization (SP‐PLP) traces to be measured on systems with a narrow radical distribution that remains essentially unchanged during the experiment. SP‐PLP‐RAFT experiments at different polymerization times allow for determining k_t as a function of chain length via classical kinetics assuming chain‐length independent k_t.

Single‐pulse pulsed‐laser polymerization trace for BMPT‐mediated RAFT polymerization of butyl acrylate.     

Sub‐Micrometer Sized Hairy Latex Particles Synthesized by Dispersion Polymerization Using Hydrophilic Macromolecular RAFT Agents

Dispersion polymerization of n‐butyl acrylate has been performed in a mixture of ethanol and water in the presence of poly(N‐acryloylmorpholine) (polyNAM). These hydrophilic polymer chains are synthesized by the RAFT process and thus incorporate well‐defined chain ends. The dithioester ω‐end group is used as an efficient chain transfer agent under dispersion polymerization conditions to produce hairy poly(n‐butyl acrylate) latex particles. Moreover, pre‐functionalization of the polyNAM chains on the α‐end by a carbohydrate derivative is also achieved to obtain directly functionalized particles according to the same strategy.

     

Design Criteria for Accurate Measurement of Bimolecular Radical Termination Rate Coefficients via the RAFT‐CLD‐T Method

The reversible addition‐fragmentation chain transfer chain length dependent termination (RAFT‐CLD‐T) technique allows a simple experimental approach to obtain chain‐length‐dependent termination rate coefficients as a function of conversion, k(x). This work provides a set of criteria by which accurate k(x) can be obtained using the RAFT‐CLD‐T method. Visualization of three‐dimensional plots varying all kinetic rate parameters and starting concentrations demonstrates that only certain combinations give an accurate extraction of k(x). The current study provides hands‐on guidelines for experimentalists applying the RAFT‐CLD‐T method.

     

Formation of Vesicular Morphologies via Polymerization Induced Self‐Assembly and Re‐Organization

A facile and feasible strategy for the preparation of vesicular morphologies has been developed using reversible addition–fragmentation chain transfer (RAFT) polymerization. The polymerization of styrene has been performed in a selected solvent, methanol, using S‐1‐dodecyl‐S‐(α,α′‐dimethyl‐α″‐acetic acid)trithiocarbonate (TC)‐terminated poly(4‐vinylpyridine) as chain transfer agent and stabilizer. Various morphologies including spherical vesicles, nanotubes, and compound vesicles with different shapes are obtained by changing the feed ratios and reaction conditions. The final nanostructural materials are formed through formation of the block copolymers, self‐assembly, and re‐organization of the morphology in a one‐pot polymerization. The latter two are induced by the propagation of PS blocks. The preparation of nanostructural materials can be performed at a concentration higher than 0.5 g · mL⁻¹, thus this method offers a practical approach to prepare nanostructural materials on a large scale.

     

Design of Heterocomplementary H‐Bonding RAFT Agents – Towards the Generation of Supramolecular Star Polymers

Supramolecular poly(vinyl acetate) PVAc 3‐arms stars were successfully generated by Reversible Addition–Fragmentation chain Transfer (RAFT)‐polymerized chains bearing hydrogen‐bonding heterocomplementary associating units. Chain Transfer Agents (CTA) bearing thymine‐ and diaminopyridine‐based units were first synthesized and proved to mediate efficiently the polymerization of VAc. The binding ability of the chains in solution was then demonstrated by ¹H NMR and GPC measurements, proving the formation of the supramolecular stars.

     

Plasma‐Initiated Controlled/Living Radical Polymerization of Methyl Methacrylate in the Presence of 2‐Cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN)

Summary: Plasma‐initiated controlled/living radical polymerization of methyl methacrylate (MMA) was carried out in the presence of 2‐cyanoprop‐2‐yl 1‐dithionaphthalate. Well‐defined poly(methyl methacrylate) (PMMA), with a narrow polydispersity, could be synthesized. The polymerization is proposed to occur via a RAFT mechanism. Chain‐extension reactions were also successfully carried out to obtain higher molecular weight PMMA and PMMA‐block‐PSt copolymer.

Dependence of ln([M]₀/[M]) on post‐polymerization time (above), and \overline M _{\rm n} and PDI against conversion (below) for plasma initiated RAFT polymerization of MMA at 25 °C.     

Combining Steric and Electrostatic Stabilization Using Hydrophilic MacroRAFT Agents in an Ab Initio Emulsion Polymerization of Styrene

Hydrophilic (co)polymers carrying a thiocarbonyl thio end group such as poly(dimethylaminoethyl methacrylate), poly(ethylene oxide), and poly(ethylene oxide)‐block‐poly(dimethylaminoethyl methacrylate) have been evaluated as precursors of stabilizers in batch ab initio emulsion polymerization of styrene under acidic conditions to form electrosterically stabilized polystyrene latex particles. As a mixture of P(DMAEMA/H⁺Cl⁻)‐RAFT and PEO‐RAFT failed to give satisfactory results, PEO‐RAFT was used as a control agent for the RAFT polymerization of DMAEMA, and the resulting block copolymer was successfully used in ab initio styrene emulsion polymerization.

     

A Strategy for Synthesis of Ion‐Bonded Supramolecular Star Polymers by Reversible Addition‐Fragmentation Chain Transfer (RAFT) Polymerization

We have developed a novel strategy for the preparation of ion‐bonded supramolecular star polymers by RAFT polymerization. An ion‐bonded star supramolecule with six functional groups was prepared from a triphenylene derivative containing tertiary amino groups and trithiocarbonate carboxylic acid, and used as the RAFT agent in polymerizations of tert‐butyl acrylate (tBA) and styrene (St). Molecular weights and structures of the polymers were characterized by ¹H NMR and GPC. The results show that the polymerization possesses the character of living free‐radical polymerization and the ion‐bonded supramolecular star polymers PSt, PtBA, and PSt‐b‐PtBA, with six well‐defined arms, were successfully synthesized.

     

Experimental Requirements for an Efficient Control of Free‐Radical Polymerizations via the Reversible Addition‐Fragmentation Chain Transfer (RAFT) Process

Summary: Reversible addition‐fragmentation chain transfer (RAFT) polymerization is a recent and very versatile controlled radical polymerization technique that has enabled the synthesis of a wide range of macromolecules with well‐defined structures, compositions, and functionalities. The RAFT process is based on a reversible addition‐fragmentation reaction mediated by thiocarbonylthio compounds used as chain transfer agents (CTAs). A great variety of CTAs have been designed and synthesized so far with different kinds of substituents. In this review, all of the CTAs encountered in the literature from 1998 to date are reported and classified according to several criteria : i) the structure of their substituents, ii) the various monomers that they have been polymerized with, and iii) the type of polymerization that has been performed (solution, dispersed media, surface initiated, and copolymerization). Moreover, the influence of various parameters is discussed, especially the CTA structure relative to the monomer and the experimental conditions (temperature, pressure, initiation, CTA/initiator ratio, concentration), in order to optimise the kinetics and the efficiency of the molecular‐weight‐distribution control.

Schematic of the RAFT polymerization.     

Aqueous RAFT Polymerization of Acrylamide and N,N‐Dimethylacrylamide at Room Temperature

Summary: The first example of a room temperature reversible addition‐fragmentation chain transfer polymerization conducted directly in aqueous media is detailed. Under these conditions acrylamide and N,N‐dimethylacrylamide may be polymerized in a controlled fashion to near quantitative conversions employing a difunctional trithiocarbonate chain transfer agent (CTA). Hydrolysis studies conducted at pH 5.5 suggest that the CTA is stable up to approximately 50 °C.

     

Parametric Analysis of the Intermediate Concentration in a RAFT Polymerization and its Influence upon the Polymerization Kinetics

Summary: A kinetic analysis of living/controlled radical polymerizations in bulk mediated by RAFT is presented. The main objective is to show how the kinetics of the RAFT process and, in particular, of the RAFT intermediate radical is affecting the overall polymerization rate. Namely, three different cases are analyzed: (i) slow fragmentation of the RAFT intermediate; (ii) cross‐termination of the RAFT intermediate with other radicals; and (iii) slow re‐initiation of the RAFT agent leaving group. Simplified analytical formulas are derived for the time‐dependent concentrations of the involved species as well as for conversion. They are supported by numerical simulations and are qualitatively compared to literature experimental findings. Criteria are also given to judge the influence of the RAFT reaction kinetic rate constants on the different phenomena observed experimentally in RAFT polymerization, namely inhibition and retardation. Since these criteria are given by using non‐dimensional groups, they can be readily applied to a broad spectrum of experimental conditions.

Logarithmic non‐dimensional concentration for the radicals (r) and intermediate radicals (q) versus the non‐dimensional polymerization time ( ).     

RAFT Miniemulsion Polymerization Kinetics, 1 – Polymerization Rate

The polymerization kinetics of a RAFT‐mediated radical polymerization inside submicron particles (30 < D_p < 300 nm) is considered. When the time fraction of active radical period, ϕ_A, is larger than ca. 1%, the polymerization rate increases with reducing particle size, as for the cases of conventional emulsion polymerization. The rate retardation by the addition of RAFT agent occurs with or without intermediate termination in zero‐one systems. For the particles with D_p < 100 nm, the statistical variation of monomer concentration among particles may not be neglected. It was found that this monomer‐concentration‐variation (MCV) effect may slow down the polymerization rate. An analytical expression describing the MCV effect is proposed, which is valid for both RAFT and conventional miniemulsion polymerizations.

     

Spontaneous Ring‐Opening Polymerization of Macrocyclic Aromatic Thioether Ketones under Transient High‐Temperature Conditions

Summary: Spontaneous ring‐opening polymerization of macrocyclic aromatic thioether ketones [ 1,4‐SC₆H₄COC₆H₄ ]_n (n = 3 and 4), in which the thioether linkages are para to the ketone, occurs during rapid, transient heating to 480 °C, to afford a soluble, semi‐crystalline poly(thioether ketone) of high molar mass (η_inh > 1.0 dL · g⁻¹). Corresponding macrocyclic ether ketones, and a macrocyclic thioether ether ketone in which the thioether linkage is para to the ether rather than to the ketone, show no evidence of polymerization under analogous conditions.

The uncatalysed ring‐opening polymerization of macrocycle 1 , within the pores of an alumina microfiltration membrane, leads to formation of polymer 3 with the microstructure shown in the above scanning electron micrograph.     

Hairy PEO‐Silica Nanoparticles through Surface‐Initiated Polymerization of Ethylene Oxide

Summary: The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles was performed in situ by the ring‐opening polymerization of the oxirane monomer initiated from the mineral surface using aluminium isopropoxide as an initiator/heterogeneous catalyst. Alcohol groups were first introduced onto silica by reacting the surfacic silanols with prehydrolyzed 3‐glycidoxypropyl trimethoxysilane. The alcohol‐grafted silica played the role of a coinitiator/chain‐transfer agent in the polymerization reaction and enabled the formation of irreversibly bonded polymer chains. Silica nanoparticles containing up to 40 wt.‐% of a hairy layer of grafted PEO chains were successfully produced by this technique.

The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles by in‐situ ring‐opening polymerization of the oxirane monomer.     

Highly Efficient and Well‐Controlled Ambient Temperature RAFT Polymerization under Solar Radiation

Highly efficient and well‐controlled ambient temperature reversible addition–fragmentation chain transfer (RAFT) polymerization is readily carried out under environmentally friendly mild solar radiation. This discovery has significantly extended studies from man‐made separated‐spectroscopic‐emission UV‐vis radiation (Macromolecules 2006 , 39, 3770) to natural continuous‐spectroscopic‐emission solar radiation for ambient temperature RAFT polymerization.

     

RAFT Inverse Miniemulsion Polymerization of Acrylamide

RAFT inverse miniemulsion polymerization is demonstrated for the first time as an alternate way to synthesize hydrophilic polymer latexes. The kinetic behavior of inverse RAFT miniemulsion polymerization of acrylamide is similar to that observed in aqueous RAFT solution polymerization. A water‐soluble initiator provides better control than a lipophilic initiator in inverse RAFT miniemulsion polymerization under the conditions used here.

     

Novel C60‐Anchored Two‐Armed Poly(tert‐butyl acrylate): Synthesis and Characterization

Summary: A multistep synthetic procedure for preparing novel C₆₀‐anchored two‐armed poly(tert‐butyl acrylate) was developed. First, two‐armed poly(tert‐butyl acrylate) bearing a malonate ester core with well‐controlled molecular weight was synthesized through atom transfer radical polymerization. The effective Bingel reaction between C₆₀ and the well‐defined polymer was then carried out to yield C₆₀‐anchored polymer. GPC, ¹H NMR, and UV‐vis spectroscopy indicated that the C₆₀‐anchored polymer was a monosubstituted and ‘closed’ 6,6‐ring‐bridged methanofullerene derivative.

Schematic of a novel C₆₀‐anchored two‐armed polymer.     

Efficient Surface Modification of Divinylbenzene Microspheres via a Combination of RAFT and Hetero Diels‐Alder Chemistry

A combination of reversible addition fragmentation chain transfer (RAFT) polymerization and hetero Diels‐Alder (HDA) chemistry has been utilized to successfully generate functional core‐shell microspheres. Initially, precipitation polymerization in conjunction with the RAFT technique has been employed to synthesize divinylbenzene (DVB) microspheres with surface expressed RAFT groups. Subsequently, HDA cycloaddition has been performed under mild reaction conditions (50 °C, 24 h) with a diene‐functionalized poly(ε‐caprolactone) (PCL). While the successful grafting is immediately evident by optical inspection of the microspheres (color change from purple to white), X‐ray photoelectron spectroscopy (XPS), and attenuated total reflectance spectroscopy (ATR) were additionally employed to characterize the chemical composition and surface functionalization of the microspheres. Further, confocal microscopy was used to confirm the presence of grafted PCL chains after labeling them with rhodamine B.