Raman spectroscopy as a rapid screening method for ancient plain window glass

The aim of this paper is to highlight the potential of Raman spectroscopy as a fast screening method for large amounts of glass samples. Besides the dedicated research of specific glass collections during the last ten years, a broad corpus of archaeological window glass still needs to be investigated. For many sites, the amount of excavated glass artefacts is enormous and a selection of the most appropriate samples for chemical analysis is necessary. A classification can be made on the basis of the typical Raman signatures for the different kinds of glasses (alkali glass, high‐lime low‐alkali (HLLA) glass, Pb‐rich glass). Even in case of strong fluorescence, an uncomplicated treatment (normalisation) of the measured signals makes it possible to distinguish between the different types of glass. The preliminary screening of glass artefacts with Raman spectroscopy is a useful tool in the study of historical glass and can already answer some questions about provenance, period of production and authenticity of the glass samples. Copyright © 2010 John Wiley & Sons, Ltd.     

Deep‐UV tip‐enhanced Raman scattering

We report for the first time the tip‐enhancement of resonance Raman scattering using deep ultraviolet (DUV) excitation wavelength. The tip‐enhancement was successfully demonstrated with an aluminum‐coated silicon tip that acts as a plasmonic material in DUV wavelengths. Both the crystal violet and adenine molecules, which were used as test samples, show electronic resonance at the 266‐nm excitation used in the experiments. With results demonstrated here, molecular analysis and imaging with nanoscale spatial resolution in DUV resonance Raman spectroscopy can be realized using the tip‐enhancement effect. Copyright © 2009 John Wiley & Sons, Ltd.     

Ag‐nanoparticle‐modified single Ag nanowire for detection of melamine by surface‐enhanced Raman spectroscopy

Silver nanowires synthesized by a solvothermal method were used as templates for fabricating silver‐nanoparticle‐decorated silver (AgNP/Ag) nanowires. The number density and particle size of Ag nanoparticles can be controlled by varying the concentration of Ag precursor. Single AgNP/Ag nanowire exhibited strong surface‐enhanced Raman scattering effect. Detection of melamine molecules at concentrations as low as 1.0 × 10⁻⁸ M was used as an example to show the possible applications of such AgNP/Ag nanowires. Their application in rapid detection of melamine in milk solution was further demonstrated. It was shown that melamine in milk solution at a low concentration of 5.0 × 10⁻⁸ M can be easily detected with little sample pretreatment. The results demonstrate the potential of single AgNP/Ag nanowire as a surface‐enhanced Raman scattering substrate for convenient and sensitive detection of trace amounts of melamine in a complex mixture. Copyright © 2012 John Wiley & Sons, Ltd.     

Raman spectroscopy of halogen‐containing carbonates

Raman spectroscopy complemented with infrared spectroscopy has been used to study a series of selected natural halogenated carbonates from different origins, including bastnasite, parisite and northupite. The position of CO₃²⁻ symmetric stretching vibration varies with the mineral composition. An additional band for northupite at 1107 cm⁻¹ is observed. Raman spectra of bastnasite, parisite and northupite show single bands at 1433, 1420 and 1554 cm⁻¹, respectively, assigned to the ν₃ (CO₃)²⁻ asymmetric stretching mode. The observation of additional Raman bands for the ν₃ modes for some halogenated carbonates is significant in that it shows distortion of the CaO₆ octahedron. No ν₂ Raman bending modes are observed for these minerals. The band is observed in the infrared spectra, and multiple ν₂ modes at 844 and 867 cm⁻¹ are observed for parisite. A single intense infrared band is found at 879 cm⁻¹ for northupite. Raman bands are observed forthe carbonate ν₄ in‐phase bending modes at 722 cm⁻¹ for bastnasite, 736 and 684 cm⁻¹ for parisite and 714 cm⁻¹ for northupite. Multiple bands are observed in the OH stretching region for selected bastansites and parisites, indicating the presence of water and OH units in the mineral structure. The presence of such bands brings into question the actual formula of these halogenated carbonate minerals. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy for trace‐level detection of explosives

The detection of explosives and their associated compounds for security screening is an active area of research and a wide variety of detection methods are involved in this very challenging area. Surface‐enhanced Raman scattering (SERS) spectroscopy is one of the most sensitive tools for the detection of molecules adsorbed on nano‐scale roughened metal surface. Moreover, SERS combines high sensitivity with the observation of vibrational spectra of species, giving complete information on the molecular structure of material under study. In this paper, SERS was applied to the detection of very small quantities of explosives adsorbed on industrially made substrates. The spectra were acquired with a compact Raman spectrometer. Usually, a high signal‐to‐noise (S/N) spectrum, suitable for identification of explosive molecules down to few hundreds of picograms, was achieved within 30 s. Our measurements suggest that it is possible to exploit SERS using a practical detection instrument for routine analysis. Copyright © 2010 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering within silver‐nanoparticle‐decorated nanometric apertures

An analytical approach using enhanced Raman spectroscopy to record molecular vibrations and associated molecular images within nanometric apertures is presented, which can essentially rival or surpass its counterparts, i.e. fluorescence microscopy, by providing unique structure‐specific information forward to chemical identification and structure elucidation. Utilizing a precise nanolithographic technology and the following chemically electroless silver deposition procedure, we deliberately construct the large scale zero‐mode waveguide array in gold film with embossed silver nanostructures on the bottom of nanowells capable of acquiring enhanced Raman spectra with substantial sensitivity and high chemical fidelity. Two chemicals, aminothiophenol (4‐ATP) and Rhodamine 6G, respectively, are employed as molecular indicators to successfully demonstrate the capability of this analytical strategy by exhibiting high‐quality Raman spectra and 2D chemical‐specific images. With a high magnitude objective (60×), we enable to acquire Raman spectra from a single nanometric aperture and quantitatively determine a peak enhancement factor of 3.63 × 10⁵ for ATP, while 1.25 × 10⁶ to Rhodamine 6G, comparable with a regular nanoparticle‐based surface‐enhanced Raman spectroscopy‐active substrate. Overall, the compelling characteristics of this detection scheme highlight its privileges for interrogating the individual molecular behavior in extremely confined geometry and illustrating the chemical insights of trace components without any labeling reagent and extra sample preparation. Copyright © 2013 John Wiley & Sons, Ltd.     

Using Raman spectroscopy as a tool for the detection of iron in glass

Raman spectroscopy has been used to identify iron‐containing glasses. This nondestructive technique offers a fast method to obtain qualitative information about the presence of iron oxides in glass. The effect of the iron content in glass samples is reflected on the topology of the Raman spectra: A strong link between the ratio of the Q₂/Q₃ vibration units of the silica tetrahedral structure is seen. If matrix effects are taken into account, also (semi)quantitative results can be obtained from the calibration lines. The linear calibration is based on the normalized band intensity at 980 cm⁻¹ (I₉₈₀/I₁₀₉₀) and the iron oxide concentration for similar glasses. In amber and dark colored glasses, an extra peak in the spectrum indicates the presence of a FeS chromophore. Different series of glasses of various origins (ancient and modern/industrial glass) have been considered. Copyright © 2011 John Wiley & Sons, Ltd.     

Nanogaps in 2D Ag‐nanocap arrays for surface‐enhanced Raman scattering

The surface‐enhanced Raman scattering substrate of Ag–Ag nanocap arrays are prepared by depositing Ag film onto two‐dimensional (2D) polystyrene colloidal nanosphere templates. When the original colloidal arrays are used as the substrate for Ag deposition, surface‐enhanced Raman scattering (SERS) enhancements show the strong size‐dependence behaviours. When O₂‐plasma etched 2D polystyrene templates are used as the substrate for Ag deposition to form nanogaps, the gap sizes between adjacent Ag nanocaps from 5 to 20 nm generate even greater SERS enhancements. When SiO₂ coverage is deposited to isolate the Ag nanocaps from the neighbours, the SERS signals are enhanced more. The significant SERS effects are due to the coupling between Ag nanocaps controlled by the distance, which enhances the local electric‐field intensity. Copyright © 2013 John Wiley & Sons, Ltd.     

Metal‐nanoparticle‐coating‐induced enhancement and weakening of resonant Raman scattering in ZnO: effect of surface electric field

Effects of Ag and Ti nanoparticle coatings on resonant Raman scattering in various ZnO thin films are presented. The longitudinal optical (LO) phonons, irrespective of the ZnO quality, exhibit an enhancement and a weakening by the Ag and Ti nanoparticle coatings, respectively. The enhancement (weakening) is always accompanied by a reduced (an increased) intensity ratio of the second to first‐order LO phonons, which can be associated with changes in the electron‐phonon coupling strength in the probed area of ZnO. Angle‐resolved X‐ray photoelectron spectroscopy provides evidence for the bending of the surface energy bands and their changes induced by the metal coatings. The effect of metal nanoparticle coatings on the Raman scattering of ZnO is thus attributed to the changes in the surface electric field. Copyright © 2011 John Wiley & Sons, Ltd.     

Raman spectroscopy of dipyrrins: nonresonant,resonant and surface‐enhanced cross‐sections and enhancement factors

Detailed studies of the mechanism of surface‐enhanced (resonance) Raman spectroscopy (SE(R)RS), and its applications, place a number of demands on the properties of SERS scatterers. With large Raman cross‐sections, versatile synthetic chemistry and complete lack of fluorescence, free dipyrrins meet these demands but the Raman and SE(R)RS spectroscopy of free dipyrrins is largely unknown. The first study of the Raman spectroscopy of free dipyrrins is therefore presented in this work. The nonresonant Raman, resonant Raman and surface‐enhanced Raman spectra of a typical meso aryl‐substituted‐dipyrrin are reported. Absolute differential cross‐sections are obtained for excitation wavelengths in the near infrared and visible region, in solution phase and for dipyrrin adsorbed on the surface of silver nanoparticles. Raman enhancement factors for SERRS and resonance Raman are calculated from the observed differential cross‐sections. The magnitudes of the resonantly enhanced cross‐sections are similar to those recently reported for strong SERS dyes such as Rhodamine 6G and Crystal Violet. Free dipyrrins offer the advantages of existing SERS dyes but without the drawback of strong fluorescence. Free dipyrrins should therefore find applications in all areas of Raman spectroscopy including fundamental studies of the mechanisms of SERS and bioanalytical and environmental applications. Copyright © 2011 John Wiley & Sons, Ltd.     

Characterization of archeological glasses by micro‐Raman spectroscopy

The method based on the deconvolution of the Raman spectra of glasses, proposed for the investigation of glazed ceramics by Colomban, is applied to archeological samples of glass of two different origins in an attempt to characterize the glass composition and the fictive temperature using a contactless, nondestructive spectroscopic technique. The samples investigated are glassy mosaic tesserae of Roman times from Massa Lubrense, Napoli, Italy, and medieval rosary grains found during the excavations in the church of San Martino di Rivosecco, Parma, Italy. The polymerization index, obtained as the ratio of the bending and stretching band amplitudes, suggests firing temperatures not less than 1000–1100 °C for both Roman and medieval glasses. From the wavenumber shift of some stretching bands at about 1050–1100 cm⁻¹, the content of lead was estimated. The medieval samples show a lower Pb content, a result confirmed by elementary energy dispersive X‐ray spectral data. Copyright © 2010 John Wiley & Sons, Ltd.     

Non‐invasive depth profiling by space and time‐resolved Raman spectroscopy

Time‐resolved Raman spectroscopy, spatially offset Raman spectroscopy and time‐resolved spatially offset Raman spectroscopy (TR‐SORS) have proven their capability for the non‐invasive profiling of deep layers of a sample. Recent studies have indicated that TR‐SORS exhibits an enhanced selectivity toward the deep layers of a sample. However, the enhanced depth profiling efficiency of TR‐SORS, in comparison with time‐resolved Raman spectroscopy and spatially offset Raman spectroscopy, is yet to be assessed and explained in accordance to the synergistic effects of spatial and temporal resolutions. This study provides a critical investigation of the depth profiling efficiency of the three deep Raman techniques. The study compares the efficiency of the various deep Raman spectroscopy techniques for the stand‐off detection of explosive precursors hidden in highly fluorescing packaging. The study explains for the first time the synergistic effects of spatial and temporal resolutions in the deep Raman techniques and their impact on the acquired spectral data. Copyright © 2013 John Wiley & Sons, Ltd.     

Gold‐coated zinc oxide nanowire‐based substrate for surface‐enhanced Raman spectroscopy

Zinc oxide nanowires with two distinct morphologies were synthesized on silicon substrates using a simple thermal evaporation and vapor transport method in an oxidizing environment. The as‐synthesized nanowires were coated with gold to allow excitation of surface plasmons over a broad frequency range. SERS studies with near‐IR excitation at 785 nm showed significant enhancement (average enhancement > 10⁶) with excellent reproducibility to detect monolayer concentrations of 4‐methylbenzenethiol (4‐MBT) and 1,2‐benzendithiol (1,2‐BDT) probe molecules. The Raman enhancement showed a strong dependence on the gold film thickness, and the peak enhancement was observed for a ∼40‐nm‐thick film. The Raman enhancement was stronger for randomly oriented nanowires compared to aligned ones suggesting the importance of contributions from the junctions of nanowires. Copyright © 2009 John Wiley & Sons, Ltd.     

Visible,near‐infrared,and ultraviolet laser‐excited Raman spectroscopy of the monocytes/macrophages (U937) cells

Raman spectra of the monocytes were recorded with laser excitation at 532, 785, 830, and 244 nm. The measurements of the Raman spectra of monocytes excited with visible, near‐infrared (NIR), and ultraviolet (UV) lasers lad to the following conclusions. (1) The Raman peak pattern of the monocytes can be easily distinguished from those of HeLa and yeast cells; (2) Positions of the Raman peaks of the dried cell are in coincidence with those of the monocytes in a culture cell media. However, the relative intensities of the peaks are changed: the peak centered around 1045 cm⁻¹ is strongly intensified. (3) Raman spectra of the dead monocytes are similar to those of living cells with only one exception: the Raman peak centered around 1004 cm⁻¹ associated with breathing mode of phenylalanine is strongly intensified. The Raman spectra of monocytes excited with 244‐nm UV laser were measured on cells in a cell culture medium. A peak centered at 1485 cm⁻¹ dominates the UV Raman spectra of monocytes. The ratio I₁₅₇₄/I₁₆₁₃ for monocytes is found to be around 0.71. This number reflects the ratio between proteins and DNA content inside a cell and it is found to be twice as high as that of E. coli and 5 times as high as that of gram‐positive bacteria. Copyright © 2009 John Wiley & Sons, Ltd.     

Multianalyte immunoassay based on surface‐enhanced Raman spectroscopy

In this paper, two immunoassay methods based on SERS are developed for multiplex analysis, both of which stemmed from the concept of forming a sandwich structure ‘capture antibody substrate/antigen/Raman‐reporter‐labeled immuno‐nanoparticles’. They are two‐molecule labeled one‐nanoparticle and one‐molecule labeled two‐nanoparticle methods. In both the methods, two different antibodies covalently bound to a solid substrate can specifically capture two different antigens from a sample. The captured antigens in turn bind selectively to their corresponding antibodies immobilized on Raman‐reporter‐labeled nanoparticles. Multianalyte immunoassay is successfully demonstrated by the detection of characteristic Raman bands of the probe molecules only when the antigen and antibody are matched. Copyright © 2007 John Wiley & Sons, Ltd.     

Experimental and statistical analysis methods for peptide detection using surface‐enhanced Raman spectroscopy

Surface‐enhanced Raman spectroscopy (SERS) has the potential to make a significant impact in biology research due to its ability to provide information orthogonal to that obtained by traditional techniques such as mass spectrometry (MS). While SERS has been well studied for its use in chemical applications, detailed investigations with biological molecules are less common. In addition, a clear understanding of how methodology and molecular characteristics impact the intensity, the number of peaks, and the signal‐to‐noise of SERS spectra is largely missing. By varying the concentration and order of addition of the SERS‐enhancer salt (LiCl) with colloidal silver, we were able to evaluate the impact of these variables on peptide spectra using a quantitative measure of spectra quality based on the number of peaks and peak intensity. The LiCl concentration and order of addition that produced the best SERS spectra were applied to a panel of synthetic peptides with a range of charges and isoelectric points (pIs) where the pI was directly correlated with higher spectral quality. Those peptides with moderate to high pIs and spectra quality scores were differentiated from each other using the improved method and a hierarchical clustering algorithm. In addition, the same method and algorithm was applied to a set of highly similar phosphorylated peptides, and it was possible to successfully classify the majority of peptides on the basis of species‐specific peak differences. Copyright © 2008 John Wiley & Sons, Ltd.     

Applications of Raman spectroscopy in herbal medicine

Raman spectroscopic techniques are a group of chemical fingerprint detection methods based on molecular vibrational spectroscopy. They are compatible with aqueous solutions and are time saving, nondestructive, and highly informative. With complementary and alternative medicine (CAM) becoming increasingly popular, more people are consuming natural herbal medicines. Thus, chemical fingerprints of herbal medicines are investigated to determine the content of these products. In this study, I review the different types of Raman spectroscopic techniques used in fingerprinting herbal medicines, including dispersive Raman spectroscopy, resonance Raman spectroscopy, Fourier transform (FT)–Raman spectroscopy, surface-enhanced Raman scattering (SERS) spectroscopy, and confocal/microscopic Raman spectroscopy. Lab-grade Raman spectroscopy instruments help detect the chemical components of herbal medicines effectively and accurately without the need for complicated separation and extraction procedures. In addition, portable Raman spectroscopy instruments could be used to monitor the health and safety compliance of herbal products in the consumer market.     

Surface‐enhanced Raman scattering and fluorescence emission of gold nanoparticle–multiwalled carbon nanotube hybrids

Multiwalled carbon nanotubes (MWCNTs) are grafted with gold (Au) nanoparticles of different sizes (1–12 and 1–20 nm) to form Au–MWCNT hybrids. The Au nanoparticles pile up at defect sites on the edges of MWCNTs in the form of chains. The micro‐Raman scattering studies of these hybrids were carried using visible to infrared wavelengths (514.5 and 1064 nm). Enhanced Raman scattering and fluorescence is observed at an excitation wavelength of 514.5 nm. It is found that the graphitic (G) mode intensity enhances by 10 times and down shifts by approximately 3 cm⁻¹ for Au–MWCNT hybrids in comparison with pristine carbon nanotubes. This enhancement in G mode due to surface‐enhanced Raman scattering effect is related to the interaction of MWCNTs with Au nanoparticles. The enhancement in Raman scattering and fluorescence for large size nanoparticles for Au–MWCNTs hybrids is corroborated with localized surface plasmon polaritons. The peak position of localized surface plasmons of Au nanoparticles shifts with the change in environment. Further, no enhancement in G mode was observed at an excitation wavelength of 1064 nm. However, the defect mode (D) mode intensity enhances, and peak position is shifted by approximately 40 cm⁻¹ to lower side at the same wavelength. The enhanced intensity of D mode at 1064 nm excitation wavelength is related to the double resonance phenomenon and shift in the particular mode occurs due to more electron phonon interactions near Fermi level. Copyright © 2012 John Wiley & Sons, Ltd.     

镍纳米球腔阵列上吸附分子拉曼散射的表面增强效应

通过聚苯乙烯纳米球为模板制备了规则排列的镍纳米球腔阵列。研究结果表明吸附于镍纳米球腔内的对巯基苯胺的拉曼散射可被极大增强。拉曼散射的表面增强被归因于纳米球腔阵列的协同表面等离子体共振与光的耦合导致的电磁场增强以及纳米球腔结构对电磁场的聚焦效应而使球腔内电磁场能量密度的增大。     

Plasmon‐enhanced polarized Raman spectroscopy for sensitive surface characterization

Local‐mode and localized surface plasmons generated on the silver thin film can selectively enhance the Raman signal from the surface. Further improvement of surface signal can be obtained by using the polarized Raman technique that results in a dramatic enhancement of the surface sensitivity by up to 25.4 times as compared to that without a silver coating. This technique will be very useful for Raman study on samples that suffer overlapping background signal. In this article, we show that it can be used to significantly improve the signal of thin strained‐Si layer on top of SiGe buffer layer. Copyright © 2008 John Wiley & Sons, Ltd.