Synthesis of poly(1‐chloro‐2‐arylacetylene)s with high cis‐content and examination of their absorption/emission properties

A series of 1‐chloro‐2‐arylacetylenes [Cl‐C?C‐Ar, Ar = C₆H₅ ( 1 ), C₆H₄‐p‐i Pr ( 2 ), C₆H₄‐p‐Oi Pr ( 3 ), C₆H₄‐p‐NHC(O)Ot Bu ( 4 ), and C₆H₄‐o‐i Pr ( 5 )] were polymerized using (tBu₃P)PdMeCl/silver trifluoromethanesulfonate (AgOTf) and MoCl₅/SnBu₄ catalysts. The corresponding polymers [poly( 1 )–poly( 5 )] with weight‐average molecular weights of 6,500–690,000 were obtained in 10–91% yields. THF‐insoluble parts, presumably high‐molecular weight polymers, were formed together with THF‐soluble polymers by the Pd‐catalyzed polymerization. The Pd catalyst polymerized nonpolar monomers 1 and 2 to give the polymers in yields lower than the Mo catalyst, while the Pd catalyst polymerized polar monomers 3 and 4 to give the corresponding polymers in higher yields. The ¹H NMR and UV–vis absorption spectra of the polymers indicated that the cis‐contents of the Pd‐based polymers were higher than those of the Mo‐based polymers, and the conjugation length of the Pd‐based polymers was shorter than that of the Mo‐based polymers. Pd‐based poly( 5 ) emitted fluorescence most strongly among poly( 1 )–poly( 5 ). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 382–388     

α‐Propargyl amino acid‐derived optically active novel substituted polyacetylenes: Synthesis,secondary structures,and responsiveness to ions

Novel optically active substituted acetylenes HC? CCH₂CR¹(CO₂CH₃)NHR² [(S)‐/(R)‐ 1 : R¹ = H, R² = Boc, (S)‐ 2 : R¹ = CH₃, R² = Boc, (S)‐ 3 : R¹ = H, R² = Fmoc, (S)‐ 4 : R¹ = CH₃, R² = Fmoc (Boc = tert‐butoxycarbonyl, Fmoc = 9‐fluorenylmethoxycarbonyl)] were synthesized from α‐propargylglycine and α‐propargylalanine, and polymerized with a rhodium catalyst to provide the polymers with number‐average molecular weights of 2400–38,900 in good yields. Polarimetric, circular dichroism (CD), and UV–vis spectroscopic analyses indicated that poly[(S)‐ 1 ], poly[(R)‐ 1 ], and poly[(S)‐ 4 ] formed predominantly one‐handed helical structures both in polar and nonpolar solvents. Poly[(S)‐ 1a ] carrying unprotected carboxy groups was obtained by alkaline hydrolysis of poly[(S)‐ 1 ], and poly[(S)‐ 4b ] carrying unprotected amino groups was obtained by removal of Fmoc groups of poly[(S)‐ 4 ] using piperidine. Poly[(S)‐ 1a ] and poly[(S)‐ 4b ] also exhibited clear CD signals, which were different from those of the precursors, poly[(S)‐ 1 ] and poly[(S)‐ 4 ]. The solution‐state IR measurement revealed the presence of intramolecular hydrogen bonding between the carbamate groups of poly[(S)‐ 1 ] and poly[(S)‐ 1a ]. The plus CD signal of poly[(S)‐ 1a ] turned into minus one on addition of alkali hydroxides and tetrabutylammonium fluoride, accompanying the red‐shift of λ_max. The degree of λ_max shift became large as the size of cation of the additive. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Helical chirality of π‐conjugated main‐chain induced by polymerization of phenylacetylene with chiral bulky pinanyl groups: Effects of the flexible spacer and polymerization catalyst

Three optically active phenylacetylene polymers with chiral bulky pinanyl groups, (?)‐poly[4‐(dimethylpinanylsilyl)phenylacetylene] [(?)‐poly(PSPA)], (+)‐poly{4‐[3‐(10‐pinanyl)tetramethyldisiloxy]phenylacethylene} [(+)‐poly(PDSPA)], and their copolymer [(?)‐copoly(PSPA/PDSPA)], were synthesized. We observed high chirality in the main‐chain chromophore of (?)‐poly(PSPA), due to the presence of a chiral helix, with circular dichroism spectroscopy. In contrast, (+)‐poly(PDSPA),with flexible SiOSi spacers between the chiral pinanyl group and the main chain, had lower chirality. (?)‐Poly(PSPA), with large circular dichroism signals, was prepared by polymerization with a rhodium catalyst and had a highly stereoregular main chain (high cis‐configuration percentage). However, (?)‐poly(PSPA) prepared with a tungsten catalyst had lower chirality and lower stereoregularity in the main chain. A membrane from (?)‐poly(PSPA) showed enantioselective permeability for tryptophan in an aqueous solution. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1689–1697, 2002     

Preparation of inclusion complex between polyaniline and β‐cyclodextrin in aqueous solution

Two routes have been developed inorder to prepare an inclusion complex of polyaniline (PANI) and β‐cyclodextrin (βCyD). The first route was to in situ polymerize N‐phenyl‐1,4‐phenylenediamine (PPD) which was encapsulated in βCyD in advance. The formation of an inclusion complex was confirmed by UV‐vis, circular dichroism (CD), and NMR spectra. It was found that the synthesized complex was readily dissolved in a range of solvents due to the solubility of βCyD. In these solvents, PANI was well encapsulated by βCyD with some conformation change in the chain of PANI, which was proved by the CD spectra of PANI. The second route involved preparing the inclusion complex by post‐encapsulation of PANI emeraldine base (EB) into βCyD in aqueous solution at room temperature. The encapsulation of EB into βCyD was confirmed by FT‐IR and UV‐vis spectra. The band shift in UV‐vis spectra indicated that the inclusion complexation was a gradual process, and the change in the chain conformation of PANI was also observed after it was encapsulated into βCyD. Copyright © 2003 John Wiley & Sons, Ltd.     

Polymerization of 3‐ethynylthiophene with homogeneous and heterogeneous Rh catalysts

3‐Ethynylthiophene (3ETh) was polymerized with Rh(I) complexes: [Rh(cod)acac], [Rh(nbd)acac], [Rh(cod)Cl]₂, and [Rh(nbd)Cl]₂ (cod is η²:η²‐cycloocta‐1,5‐diene and nbd η²:η²‐norborna‐2,5‐diene), used as homogeneous catalysts and with the last two complexes anchored on mesoporous polybenzimidazole (PBI) beads: [Rh(cod)Cl]₂/PBI and [Rh(nbd)Cl]₂/PBI used as heterogeneous catalysts. All tested catalyst systems give high‐cis poly(3ETh). In situ NMR study of homogeneous polymerizations induced with [Rh(cod)acac] and [Rh(nbd)acac] complexes has revealed: (i) a transformation of acac ligands into free acetylacetone (Hacac) occurring since the early stage of polymerization, which suggests that this reaction is part of the initiation, (ii) that the initiation is rather slow in both of these polymerization systems, and (iii) a release of cod ligand from [Rh(cod)acac] complex but no release of nbd ligand from [Rh(nbd)acac] complex during the polymerization. The stability of diene ligand binding to Rh‐atom in [Rh(diene)acac] catalysts remarkably affects only the molecular weight but not the yield of poly(3ETh). The heterogeneous catalyst systems also provide high‐cis poly(3ETh), which is of very low contamination with catalyst residues since a leaching of anchored Rh complexes is negligible. The course of heterogeneous polymerizations is somewhat affected by limitations arising from the diffusion of monomer inside catalyst beads. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2776–2787, 2008     

Synthesis of polyarylacetylenes by γ‐ray‐induced polymerization of terminal alkynes. Nanostructures of ortho‐substituted derivatives

Terminal aryl alkynes RC₆H₄C?CH with substituents of different electronic properties and ring position (R = H, 4‐CF₃, 4‐OMe, 2‐CF₃, 2‐OMe, 2‐Me) were exposed to γ‐radiation (50–400 kGy) in organic solvents (hexane, 1,4‐dioxane, ethylacetate, methanol, tetrahydrofuran), at room temperature. The effects arising from substituent, solvent, dilution, and radiation dose allowed to define the conditions suitable for polymerization, which was favored in methanol at increasing dilution of the alkyne. Ortho‐substitution represented the key structural element in the substrate, and the derived polyarylacetylenes were characterized in detail, including gel permeation chromatography, thermal analysis, infrared, NMR, UV–vis, fluorescence, and scanning electron microscope spectroscopy. The results are consistent with the formation of irregular polymers mainly composed of trans‐transoid chains. Controlled aggregation of the polymers by means of an osmosis‐based procedure in solvent/non‐solvent mixtures allowed the formation of nanostructured materials, in particular of hollow nanospheres from THF/water. The methodology sets the basis for the development of γ‐rays‐induced polymerization of alkynes, in a transition metal catalyst‐free environment. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Functional syndiotactic poly(β‐hydroxyalkanoate)s via stereoselective ring‐opening copolymerization of rac‐β‐butyrolactone and rac‐allyl‐β‐butyrolactone

The copolymerization of racemic β‐butyrolactone (rac‐BL^Me) with racemic “allyl‐β‐butyrolactone” (rac‐BL^allyl) in toluene, catalyzed by the discrete amino‐alkoxy‐bis(phenolate) yttrium‐amido complex 1 , gave new poly(β‐hydroxyalkanoate)s with unsaturated side chains. The poly(BL^Me‐co‐BL^allyl) copolymers produced have a highly syndiotactic backbone structure (P_r = 0.80–0.84) with a random enchainment of monomer units, as evidenced by ¹³C NMR, and high molecular weight (M_n up to 58,000 g mol^?1) with a narrow polydispersity (M_w/M_n = 1.07–1.37), as determined by GPC. The comonomer incorporation (5–50 mol % rac‐BL^allyl) was a linear function of the feed ratio. The pendant vinyl bond of the side‐chains in those poly(BL^Me‐co‐BL^allyl) copolymers allowed the effective introduction of hydroxy or epoxy groups via dihydroxylation, hydroboration‐oxidation or epoxidation reactions. NMR studies indicated that all of these transformations proceed in an essentially quantitative conversion and do not affect the macromolecular architecture. Some thermal properties (T_m, ΔH_m, T_g) of the prepared polymers have been also evaluated. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3177–3189, 2009     

Homo‐ and copolymerization of norbornene and 5‐norbornene‐2‐yl acetate with bis‐(β‐ketonaphthylamino)palladium(II)/B(C6F5)3 catalytic system

The polymerization of norbornene with bis(β‐ketonaphthylamino) palladium(II), Pd{CH₃C(O)CHC[N(naphthyl)]CH₃}₂, in combination with tris(pentafluorophenyl)borane (B(C₆F₅)₃), was investigated by varying the B:Pd(II) molar ratio, monomer concentration, reaction temperature, and time. The catalytic activity was found to reach 2.8 × 10⁴ gPolymer/(molPd^?h) and the obtained polynorbornene (PNBE) was confirmed to be vinyl addition polymer and showed good thermo‐stability (T_dec > 350°C), but exhibited poor solubility in organic solvents due to the relative higher stereo regularity. Pd{CH₃C(O)CHC[N(naphthyl)]CH₃}₂/B(C₆F₅)₃ system is also an active catalyst for copolymerization of norbornene and 5‐norbornene‐2‐yl acetate (NBE‐OCOCH₃) in toluene with moderate yields (in 9.2–36.5% yields) and produces the addition‐type copolymer with relatively high molecular weights (0.96 × 10⁴–2.13 × 10⁴ g/mol). The incorporation of functional group in the copolymer can be controlled up to 0.9–23.5 mol% by varying the NBE‐OCOCH₃ monomer feed ratios from 10 to 90%. The copolymers are proved to be noncrystalline and show good solubility in common organic solvents and excellent thermal stability up to 350°C. Copyright © 2011 John Wiley & Sons, Ltd.     

β‐Cyclodextrin Pseudopolyrotaxanes with π‐Conjugated Polymer Axles

Summary: β‐Cyclodextrin (β‐CD) pseudopolyrotaxanes containing poly(thiophene‐2,5‐diyl), PTh , or poly(3‐methylthiophene‐2,5‐diyl)s, P3MeTh s, as an axle were prepared. Structures of the pseudopolyrotaxanes and their inclusion behavior with β‐CD were investigated. The UV‐vis measurements revealed that inclusion of P3MeTh s by β‐CD depended on the flexibility of the main chain and their molecular weight.

Formation of the inclusion complex of β‐CD and PTh .     

Ethylene/α‐olefin copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Copolymerizations of ethylene with α‐olefins (i.e., 1‐hexene, 1‐octene, allylbenzene, and 4‐phenyl‐1‐butene) using the bis(β‐enaminoketonato) titanium complexes [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ ( 1a : R₁ = CF₃, R₂ = CH₃; 1b : R₁ = Ph, R₂ = CF₃; and 1c : R₁ = t‐Bu, R₂ = CF₃), activated with modified methylaluminoxane as a cocatalyst, have been investigated. The catalyst activity, comonomer incorporation, and molecular weight, and molecular weight distribution of the polymers produced can be controlled over a wide range by the variation of the catalyst structure, α‐olefin, and reaction parameters such as the comonomer feed concentration. The substituents R₁ and R₂ of the ligands affect considerably both the catalyst activity and comonomer incorporation. Precatalyst 1a exhibits high catalytic activity and produces high‐molecular‐weight copolymers with high α‐olefin insertion. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6323–6330, 2005     

Catalytic [2 + 2 + 2] cycloaddition polymerization of diyne–nitrile monomers in the presence of CoCl2‐6H2O/diphosphine/Zn

Cobalt‐catalyzed [2 + 2 + 2] cocycloaddition reaction of 1,6‐diynes and nitriles to generate substituted pyridines has been applied to the polymerization of diyne–nitrile monomers, the reaction of which proceeded smoothly in a step‐growth fashion to provide linear polymers comprising pyridine structures in the main chain. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 345–351     

Two modes of asymmetric polymerization of phenylacetylenes having an L‐amino alcohol residue and two hydroxy groups

Four novel chiral phenylacetylenes having an L ‐amino alcohol residue and two hydroxymethyl groups were synthesized and polymerized by an achiral catalyst ((nbd)Rh⁺[η⁶‐(C₆H₅)B^?(C₆H₅)₃]) or a chiral catalytic system ([Rh(nbd)Cl]₂/(S)‐ or (R)‐phenylethylamine ((S)‐ or (R)‐PEA)). The two resulting polymers having an L ‐valinol or L ‐phenylalaninol residue showed Cotton effects at wavelengths around 430 nm. This observation indicated that they had an excess of one‐handed helical backbones. Positive and negative Cotton effects were observed only for the polymers having an L ‐valinol residue produced by using (R)‐ and (S)‐PEA as a cocatalyst, respectively, although the monomer had the same chirality. Even when the achiral catalyst was used, the two resulting polymers having an L ‐valinol or L ‐phenylalaninol residue showed Cotton effects despite the long distance between the chiral groups and the main chain. We have found the first example of a new type of chiral monomer, that is, a chiral phenylacetylene monomer having an L ‐amino alcohol residue and two hydroxy groups that was suitable for both modes of asymmetric polymerization, that is, the helix‐sense‐selective polymerization ( HSSP ) with the chiral catalytic system and the asymmetric‐induced polymerization ( AIP ) with the achiral catalyst. The other two monomers having L ‐alaninol and L ‐tyrosinol were found to be unsuitable to neither HSSP nor AIP because of their polymers' low solubility. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

MCM‐41‐Immobilized [Rh(cod)OCH3]2 Complex – A Hybrid Catalyst for the Polymerization of Phenylacetylene and Its Ring‐Substituted Derivatives

The immobilization of [Rh(cod)OCH₃]₂ (cod = cycloocta‐1,5‐diene) on mesoporous molecular sieves MCM‐41 provides the first inorganic‐type hybrid catalyst, which affords heterogeneous polymerization of phenylacetylene and its ring‐substituted derivatives, – 2‐fluorophenylacetylene, 4‐fluorophenylacetylene, and 4‐pentylphenylacetylene – into readily isolable high‐molecular‐weight (M̄_w from 50 000 to 180 000) substituted polyvinylenes of high cis‐transoid structure. The activity of this catalyst is compared with that of homogeneous catalyst [Rh(cod)OCH₃]₂.     

Acyclic diene metathesis polymerization of 2,5‐dialkyl‐1,4‐divinylbenzene with molybdenum or ruthenium catalysts: Factors affecting the precise synthesis of defect‐free,high‐molecular‐weight trans‐poly(p‐phenylene vinylene)s

Factors affecting the syntheses of high‐molecular‐weight poly(2,5‐dialkyl‐1,4‐phenylene vinylene) by the acyclic diene metathesis polymerization of 2,5‐dialkyl‐1,4‐divinylbenzenes [alkyl = n‐octyl ( 2 ) and 2‐ethylhexyl ( 3 )] with a molybdenum or ruthenium catalyst were explored. The polymerizations of 2 by Mo(N‐2,6‐Me₂C₆H₃) (CHMe₂ Ph)[OCMe(CF₃)₂]₂ at 25 °C was completed with both a high initial monomer concentration and reduced pressure, affording poly(p‐phenylene vinylene)s with low polydispersity index values (number‐average molecular weight = 3.3–3.65 × 10³ by gel permeation chromatography vs polystyrene standards, weight‐average molecular weight/number‐average molecular weight = 1.1–1.2), but the polymerization of 3 was not completed under the same conditions. The synthesis of structurally regular (all‐trans), defect‐free, high‐molecular‐weight 2‐ethylhexyl substituted poly(p‐phenylene vinylene)s [poly 3 ; degree of monomer repeating unit (DP_n) = ca. 16–70 by ¹H NMR] with unimodal molecular weight distributions (number‐average molecular weight = 8.30–36.3 × 10³ by gel permeation chromatography, weight‐average molecular weight/number‐average molecular weight = 1.6–2.1) and with defined polymer chain ends (as a vinyl group, ? CH?CH₂) was achieved when Ru(CHPh)(Cl)₂(IMesH₂)(PCy₃) or Ru(CH‐2‐OⁱPr‐C₆H₄)(Cl)₂(IMesH₂) [IMesH₂ = 1,3‐bis(2,4,6‐trimethylphenyl)‐2‐imidazolidinylidene] was employed as a catalyst at 50 °C. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6166–6177, 2005     

Quasi‐living copolymerization of ethylene with 1‐hexene by heteroligated (salicylaldiminato β‐enaminoketonato) titanium complexes

A series of heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐Bu^t‐2‐OC₆H₃CH = N(C₆F₅)] [PhN = C(R₁)CHC(R₂)O]TiCl₂ [ 3a : R₁ = CF₃, R₂ = ^tBu; 3b : R₁ = Me, R₂ = CF₃; 3c : R₁ = CF₃, R₂ = Ph; 3d : R₁ = CF₃, R₂ = C₆H₄Ph(p ); 3e : R₁ = CF₃, R₂ = C₆H₄Ph(o ); 3f : R = CF₃, R₂ = C₆H₄Cl(p ); 3g : R₁ = CF₃; R₂ = C₆H₃Cl₂(2,5); 3h : R₁ = CF₃, R₂ = C₆H₄Me(p )] were investigated as catalysts for ethylene (co)polymerization. In the presence of modified methylaluminoxane as a cocatalyst, these complexes showed activities about 50%–1000% and 10%–100% higher than their corresponding bis(β‐enaminoketonato) titanium complexes for ethylene homo‐ and ethylene/1‐hexene copolymerization, respectively. They produced high or moderate molecular weight copolymers with 1‐hexene incorporations about 10%–200% higher than their homoligated counterpart pentafluorinated FI‐Ti complex. Among them, complex 3b displayed the highest activity [2.06 × 10⁶ g/mol_Ti?h], affording copolymers with the highest 1‐hexene incorporations of 34.8 mol% under mild conditions. Moreover, catalyst 3h with electron‐donating group not only exhibited much higher 1‐hexene incorporations (9.0 mol% vs. 3.2 mol%) than pentafluorinated FI‐Ti complex but also generated copolymers with similar narrow molecular weight distributions (M _w/M _n = 1.20–1.26). When the 1‐hexene concentration in the feed was about 2.0 mol/L and the hexene incorporation of resultant polymer was about 9.0 mol%, a quasi‐living copolymerization behavior could be achieved. ¹H and ¹³C NMR spectroscopic analysis of their resulting copolymers demonstrated the possible copolymerization mechanism, which was related with the chain initiation, monomer insertion style, chain transfer and termination during the polymerization process. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2787–2797     

Investigation of catalyst‐transfer condensation polymerization for the synthesis of n‐type π‐conjugated polymer,poly(2‐dioxaalkylpyridine‐3,6‐diyl)

Kumada‐Tamao coupling polymerization of 6‐bromo‐3‐chloromagnesio‐2‐(3‐(2‐methoxyethoxy)propyl)pyridine 1 with a Ni catalyst and Suzuki‐Miyaura coupling polymerization of boronic ester monomer 2 , which has the same substituted pyridine structure, with ^tBu₃PPd(o‐tolyl)Br were investigated for the synthesis of a well‐defined n‐type π‐conjugated polymer. We first carried out a model reaction of 2,5‐dibromopyridine with 0.5 equivalent of phenylmagnesium chloride in the presence of Ni(dppp)Cl₂ and then observed exclusive formation of 2,5‐diphenylpyridine, indicating that successive coupling reaction took place via intramolecular transfer of Ni(0) catalyst on the pyridine ring. Then, we examined the Kumada‐Tamao polymerization of 1 and found that it proceeded homogeneously to afford soluble, regioregular head‐to‐tail poly(pyridine‐2,5‐diyl), poly(3‐(2‐(2‐(methoxyethoxy)propyl)pyridine) (PMEPPy). However, the molecular weight distribution of the polymers obtained with several Ni and Pd catalysts was very broad, and the matrix‐assisted laser desorption ionization time‐of‐flight mass spectra showed that the polymer had Br/Br and Br/H end groups, implying that the catalyst‐transfer polymerization is accompanied with disproportionation. Suzuki‐Miyaura polymerization of 2 with ^tBu₃PPd(o‐tolyl)Br also afforded PMEPPy with a broad molecular weight distribution, and the tolyl/tolyl‐ended polymer was a major product, again indicating the occurrence of disproportionation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Titanium complexes based on aminodiol ligands for the ring‐opening polymerization of ε‐caprolactone,rac‐β‐butyrolactone,and trimethylene carbonate

Several titanium complexes based on aminodiol ligands were tested as initiators for the ring‐opening polymerization (ROP) of ε‐caprolactone under solution and bulk conditions. All complexes were found to be efficient under both conditions. For bulk polymerization at 70 °C, high activities were observed (113.3–156.2 g_poly mmol_cat^?1 h^?1) together with controlled molar mass distribution. Kinetic studies revealed controlled polymerization, and the chain propagation was first order with respect to monomer conversion. One complex was also tested for the ROP of rac‐β‐butyrolactone and the end‐group analysis suggested that ring opening occurs through acyl‐oxygen bond cleavage via coordination–insertion mechanism. The microstructure analysis of polymer by ¹³C NMR indicates atactic polymer. Another complex was also found to be efficient initiator for the ROP of trimethylene carbonate under solution and bulk conditions. Again, end‐group analysis suggests coordination–insertion mechanism. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Veronicafolin－β-环糊精的物化表征及Veronicafolin－羟丙基-β-环糊精包合物溶解性的增强

用氢谱、红外光谱、X-射线粉末衍射、热分析、元素分析等测试方法研究了Veronicafolin (3,5,4′-三羟基-6,7,3′-三甲氧基黄酮) 和β-环糊精 (β-CD) 的固体包合物的谱学特征。元素分析结果显示形成Veronicafolin-β-CD·20H2O包合物，其中C：39.58%, H: 5.75%，表明包合物中主客体比为1∶1。该包合类型属于A_L-型。通过紫外-可见分光光度法研究了在羟丙基-β-环糊精（HP-β-CD）的存在下Veronicafolin的相溶解度曲线，测得校正曲线为y = 24148x + 0.0075 (r=0.9999)，相溶解曲线为y=0.4738x-2.0×10^-7 (r=0.9490)，包结平衡常数Ks为4.5×10⁶mol-1。HP-β-CD提高了黄酮醇Veronicafolin的溶解度。     

Synthesis and spectroscopic investigation of π‐conjugated (E)‐enyne polycarbazole with different organo‐metallic catalysts from 3,6‐diethynyl‐9‐(2‐ethylhexyl)carbazole

In the present study, a new (E)‐rich‐enyne π‐conjugated polymer containing a carbazole was designed and synthesized. Two different synthesis methods of poly[N‐(2‐ethylhexyl)‐3,6‐carbazolyleneethynylene‐(E)‐vinylene] (PCZEV) have been prepared from 3,6‐diethynyl‐9(2‐ethylhexyl)carbazole by using the palladium‐carbene‐catalyzed reaction and/or by using the organolanthanide‐catalyzed reaction leading to well‐defined polymer, and their general properties were studied. Compared to poly[N‐(2‐ethylhexyl)‐3,6‐carbazolyleneethynylene] (PCE), the UV‐vis absorption and photoluminescence of the PCZEV was red‐shifted, which indicates the extension of conjugation length. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2434–2442, 2009     

The effect of amide solvent structure on the direct arylation polymerization (DArP) of 2‐Bromo‐3‐hexylthiophene

In this work, we investigate the influence of the amide solvent chemical structure on the properties of poly(3‐hexylthiophene) (P3HT) prepared via direct arylation polymerization (DArP). Our findings indicate that for successful polymerization the amide must possess an acyclic aliphatic structure since cyclization of an amide results in a complete shutdown of DArP reactivity as evidenced by failed polymerization in N‐methylpyrrolidone, whereas the presence of an aromatic motif renders the amide solvent susceptible to C? H activation and leads to incorporation of the solvent structure into the P3HT backbone, as demonstrated on the example of N,N‐diethylbenzamide. Additionally, we observed that the steric bulk of alkyl substituents on both the nitrogen atom and the carbonyl group within the amide structure has to be delicately balanced for optimal DArP reactivity. In the optimal cases, P3HT is obtained in high yield, with high molecular weight and contains a minimal amount of structural defects. The obtained polymer samples were comprehensively studied in terms of their chemical structure, optical, thermal and solid‐state properties in thin films using GPC analysis, ¹H NMR, MALDI, UV–vis, GIXRD spectroscopy, and DSC. We additionally note a drastic difference of the amide solvent effect between DArP and Stille polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2494–2500