The Advantages of In Situ Surfactant Generation for Miniemulsions

The stabilisation of miniemulsions using an in situ generated surfactant is presented. This surfactant, prepared from of a water‐soluble base and an oil‐soluble long chain acid was successfully used to create stable miniemulsions with up to 60 vol.‐% organic phase. It is shown that the creation of a surface active species at the oil–water interface allowed stable miniemulsions to be generated more rapidly than when using conventional surfactant. In addition, polymerised miniemulsions exhibited less secondary nucleation when in situ surfactants were used.

     

Copolymerization of Ethylene and 10‐Undecen‐1‐ol using a Montmorillonite‐Intercalated Metallocene Catalyst: Synthesis of Polyethylene/Montmorillonite Nanocomposites with Enhanced Structural Stability

Summary: Ethylene and 10‐undecen‐1‐ol have been successfully copolymerized by an organically modified montmorillonite (OMMT)‐intercalated metallocene catalyst, Et[Ind]₂ZrCl₂, activated by methylaluminoxane (MAO). The obtained hydroxy‐functionalized polyethylene (PE‐OH)/OMMT nanocomposites exhibit enhanced structural stability as compared with the neat PE‐based ones, with no significant collapse of the nanocomposite structure being detected by WAXD examination after high‐temperature processing. The simultaneous polyolefin functionalization provides an effective and convenient solution to stabilize the PE/MMT nanocomposite structure formed by in‐situ polymerization.

     

Water‐Soluble Electrostatic Complexes of C60‐Anchored Anionic Polymers and Cationic Porphyrins

The preparation of novel highly water‐soluble electrostatic complexes from C₆₀‐anchored multi‐armed poly(acrylic acid)s and cationic porphyrin derivatives was demonstrated. The UV‐vis absorption and photoluminescence (PL) of these complexes show that the absorption of soret band exhibits a remarkable red shift and the emission of the Q band indicates an apparent quenching effect in comparison with that of the parent cationic porphyrin. These results imply a remarkable ground state and excited state interaction between the porphyrin ring and the C₆₀ moiety.

     

Morphology Evolution during the Phase Separation of Polyetherimide/Epoxy Blends

The results of time‐resolved light scattering for the phase separation of epoxy/polyetherimide/anhydride blends show that the evolution of scattering vector q_m follows a Maxwell‐type relaxation equation. The relaxation time may be suggested as the time taken for the diffusion of the epoxy‐anhydride n‐mers from the PEI‐rich phase by their relaxation movement, and the apparent activation energy of the relaxation movement is obtained.

Values of q_m versus time at different temperatures.     

New Polylactide/Layered Silicate Nanocomposite: Nanoscale Control Over Multiple Properties

The preparation, characterization, materials properties, crystallization behavior and biodegradability of a polylactide (PLA)/organically modified layered silicate nanocomposite is described. Wide‐angle X‐ray diffraction and high‐resolution TEM analyses confirmed that intercalated stacked and disordered/exfoliated mica layers coexist in the nanocomposite. The nanocomposite showed improved materials properties and crystallization behavior with a simultaneous improvement in biodegradability as compared to neat PLA.

Degree of biodegradation (i.e. CO₂ evolution) of neat PLA and PLACN4 under compost conditions.     

Properties of Nylon‐6/Na+‐Montmorillonite Nanocomposites Obtained by Hydrolyzed Ring‐Opening Polymerization

Summary: Nylon‐6/Na⁺‐montmorillonite (MMT) nanocomposites (NNNs) are synthesized by a hydrolyzed ring‐opening polymerization. At a loading of only 2 wt.‐% MMT, the tensile modulus, the flexural modulus, and the heat distortion temperature of the NNNs exhibit increases of nearly 20%, 60%, and 63 °C, respectively. Compared with that of neat nylon‐6, the temperature of the main α‐relaxation (T_α) of the NNNs is shifted 3.6 °C toward higher temperatures and two β‐relaxation peaks are observed. Another interesting phenomenon is that there is a new melting peak (at about 206 °C) for the NNNs.

DSC second heating curves of neat nylon‐6 (N6), nylon‐6/Na⁺‐MMT nanocomposites with highly swollen Na⁺‐MMT (NHM), and nylon‐6/Na⁺‐MMT nanocomposites with slightly swollen Na⁺‐MMT (NSM) with various amounts of Na⁺‐MMT.     

Poly(ethylene glycol) Surface Coated Magnetic Particles

Summary: A methacrylate‐functionalized poly(ethylene glycol) macromonomer was copolymerized at the surface of methacrylate‐derivatized maghemite nanoparticles. After silylation of the magnetic core with methacryloxypropyltrimethoxysilane, two grafting procedures based on either a direct copolymerization reaction in water or an inverse emulsion polymerization were compared. A direct copolymerization led to low polymer surface amounts, whereas an inverse emulsion process allowed nanocomposite particles containing up to 90 wt.‐% polymer to be obtained.

TEM picture of maghemite‐PEG hybrid particles.     

Effect of Concentration Gradient on the Morphology Development in Polymer Solutions Undergoing Thermally Induced Phase Separation

Anisotropic porous polymeric materials fabricated from the phase separation method via spinodal decomposition are used in various practical engineering applications. We studied the formation of anisotropic porous polymeric materials numerically, by imposing an initial linear concentration gradient across a model polymer solution. The initial concentration gradient is placed at three different regions of the polymer sample for comparison purposes. All the simulation results are in good agreement with published experimental observations, which are reported from the applications of porous polymeric membranes. The structure development shows that an anisotropic porous morphology forms when an initial linear concentration gradient is applied to the model polymer solution.

     

Polyglycidol Based Amphiphilic Double‐Comb Copolymers and Their Self‐Association in Aqueous Solution

Herein, we report synthesis and self‐association properties of amphiphilic double‐comb polymers with polyglycidol backbones. First, a bifunctional polyglycidol precursor is synthesized via monomer activated anionic polymerization. Next, two efficient and orthogonal polymer analogous reactions are carried out for grafting hydrophilic oligoethylene glycol side chains and hydrophobic linear aliphatic side‐chains. The polymers are analyzed by means of NMR, GPC, and DSC. From the DSC analysis of the bulk samples it is evident that aliphatic side chains segregate from the polar backbone and thus crystallize. Furthermore, in aqueous media the double‐comb polymers spontaneously self‐assemble to form a multilayer structure. The present results pave a way to tailor and design amphiphilic polymers based on glycidols. Major advantages are spontaneous self‐assembly in water and the possibility to form onion polymersomes relevant to encapsulation.

     

Surface Plasmon Resonance Spectroscopy as a Tool to Study Polyplex‐Glycoaminoglycan Interactions

Summary: This article reports the application of surface plasmon resonance (SPR) to monitor the interaction between polymer‐DNA complexes and glycoaminoglycans (GAG). The GAG selected was hyaluronic acid (HA). First a HA derivative containing a disulfide linkage was synthesized, enabling chemisorption onto a gold surface. Next, the interaction between different complexes (prepared using PEI or PDMAEMA) and HA was studied using SPR. This study clearly indicates that GAG‐polyplex interactions depend on the type of polymer selected and on the charge ratio of the polyplexes prepared.

The derivative developed opens up new perspectives in the field of nonviral gene delivery.     

Highly Extensible Bio‐Nanocomposite Fibers

Here, we show that a poly(ethylene oxide) polymer can be physically cross‐linked with silicate nanoparticles (Laponite) to yield highly extensible, bio‐nanocomposite fibers that, upon pulling, stretch to extreme lengths and crystallize polymer chains. We find that both, nanometer structures and mechanical properties of the fibers respond to mechanical deformation by exhibiting strain‐induced crystallization and high elongation. We explore the structural characteristics using X‐ray scattering and the mechanical properties of the dried fibers made from hydrogels in order to determine feasibility for eventual biomedical use and to map out directions for further materials development.

     

Kinetics of the Thermal and Thermo‐Oxidative Degradation of a Polystyrene–Clay Nanocomposite

Summary: Thermogravimetry and differential scanning calorimetry have been used to study the thermal and thermo‐oxidative degradation of polystyrene (PS) and a PS–clay nanocomposite. An advanced isoconversional method has been applied for kinetic analysis. Introduction of the clay phase increases the activation energy and affects the total heat of degradation, which suggests a change in the reaction mechanism. The obtained kinetic data permit a comparative assessment of the fire resistance of the studied materials.

The change in activation energy for the degradation of PS and the PS–clay nanocomposite with the extent of polymer conversion.     

Tracking Explicit Chain Sequence in Kinetic Monte Carlo Simulations

The execution of individual KMC events can become a major computational bottleneck in the simulation of sequences along chains using KMC because of complex data storage schemes required to record the sequence of each chain. The execution of a KMC event can be very time‐consuming because searching, moving, and modifying all the data detailing a chain to reflect the transformation as a result of a chemical reaction event can be computationally expensive. To address this issue, we developed a new data storage scheme for recording sequence, which can significantly improve calculation speed without affecting the information content of the calculations. By using the proposed data storage scheme, the computational time can be reduced significantly from 12 h to 4 min for our test reaction system.

     

Automated Parallel Temperature Optimization and Determination of Activation Energy for the Living Cationic Polymerization of 2‐Ethyl‐2‐oxazoline

Sixteen parallel polymerization reactions of 2‐ethyl‐2‐oxazoline have been performed at different temperatures in an automated synthesizer that allowed individual heating of each reactor. During the reactions samples were taken automatically, which were characterized by means of both online GPC and offline GC, in order to optimize the reaction temperature and to determine the activation energy of the polymerization.

     

Polymer/Laponite Composite Latexes: Particle Morphology,Film Microstructure,and Properties

Transparent film materials with excellent mechanical and thermal properties were elaborated by drying a latex suspension of armored polymer/Laponite composite particles. Low‐temperature TEM observation of ultrathin cross‐sections of the films indicated a unique network morphology characterized by a “honeycomb” distribution of the Laponite platelets remindful of the original particles morphology.

     

Green Nanocomposites from Renewable Resources: Biodegradable Plant Oil‐Silica Hybrid Coatings

Green nanocomposite coatings based on renewable plant oils have been developed. An acid‐catalyzed curing of epoxidized plant oils with 3‐glycidoxypropyltrimethoxysilane produced transparent nanocomposites. The hardness and mechanical strength improved by incorporating the silica network into the organic polymer matrix, and good flexibility was observed in the nanocomposite. The nanocomposites showed high biodegradability.

     

Synthesis of Branched Polyglucans by the Tandem Action of Potato Phosphorylase and Deinococcus geothermalis Glycogen Branching Enzyme

An enzymatic tandem reaction is described in which the enzymes phosphorylase and Deinococcus geothermalis glycogen branching enzyme (Dg GBE) catalyze the synthesis of branched polyglucans from glucose‐1‐phosphate (G‐1‐P). Phosphorylase consumes G‐1‐P and polymerizes linear amylose while Dg GBE introduces branching points on the α‐(1 → 6) positions by reshuffling short oligosaccharides. The resulting branched polyglucans have an unusually high degree of branching of 11%.