Preparation,structure and photoluminescence properties of SiO2–coated ZnS nanowires

It is essential to passivate one‐dimensional (1D) nanostructures with insulating materials to avoid crosstalking as well as to protect them from contamination and oxidation. The structure and influence of thermal annealing on the photoluminescence properties of ZnS‐core/SiO₂‐shell nanowires synthesized by the thermal evaporation of ZnS powders followed by the sputter deposition of SiO₂ were investigated. Transmission electron microscopy and X‐ray diffraction analyses revealed that the cores and shells of the core‐shell nanowires were single crystal zinc blende‐type ZnO and amorphous SiO₂, respectively. Photoluminescence (PL) measurement showed that the core‐shell nanowires had a green emission band centered at around 525 nm with a shoulder at around 385 nm. The PL emission of the core‐shell nanowires was enhanced in intensity by annealing in an oxidative atmosphere and further enhanced by subsequently annealing in a reducing atmosphere. Also the origin of the enhancement of the green emission by annealing is discussed based on the energy‐dispersive X‐ray spectroscopy analysis results. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Structural,Raman, and photoluminescence properties of double‐shelled coaxial nanocables of In2O3 core with ZnO and AZO shells

We synthesized In₂O₃/ZnO/Al‐doped ZnO (AZO) core‐double shell nanowires, in which the inner shell (ZnO) and the outer shell (AZO) have been subsequently deposited on the core In₂O₃ nanowires. With their one‐dimensional morphology being preserved, the X‐ray diffraction (XRD), lattice‐resolved transmission electron microscopy (TEM) image, selected area electron diffraction, and Raman spectrum coincidentally revealed that the shell was comprised of hexagonal ZnO phase. In addition, TEM‐EDX investigation revealed the presence of Al elements in the shell region. The thermal annealing at 700 °C did not significantly change the nanowire morphology, however, the XRD spectrum indicated that the ZnO phase was crystallized by the annealing. PL spectrum of the 700 °C‐annealed In₂O₃/ZnO/AZO core‐double shell nanowires was comprised of three Gaussian bands at approximately 2.1 eV, 2.4 eV, and 3.0 eV, respectively. The integrated intensities of 2.1 eV‐, 2.4 eV‐, and 3.0 eV‐bands were decreased by the thermal annealing. This study will pave the road to the preparation and applicaition of double‐shelled nanowires. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Catalyst‐free thermally‐evaporated growth and optical properties of ZnO nanowires on Si,GaN and sapphire substrates

Vertically well‐aligned zinc oxide nanowires (NWs) with high density were successfully synthesized on Si, sapphire and GaN/sapphire substrates by thermal evaporation of zinc powders without catalysts or additives. The growth behavior of ZnO NWs was strongly dependent on the substrate materials. The effects of the substrate position on the structures and properties of ZnO NWs were primarily discussed. The morphology and crystallinity of the resultant NWs were studied by scanning electron microscope, transmission electronic microscope and X‐ray diffraction. The photoluminescence (PL) characteristics of the ZnO NWs on the different substrates were studied. The results showed that the as‐grown ZnO NWs exhibit a sharp and strong ultraviolet emission at 3.27 eV and a very weak green emission at around 2.48 eV, indicating that the a‐synthesized NWs have excellent PL properties with good crystalline quality and can be an ideal candidate for making luminescent devices. By comparison of PL spectra, we revealed that the green‐to‐UV emission intensity ratios were considerably dependent on the substrate materials, which was explained by the difference in the structural morphology of the produced nanowires.     

Preparation,structure, and photoluminescence properties of Ga2O3/SnO2 coaxial nanowires

Ga₂O₃/SnO₂ coaxial nanowires were synthesized by thermal evaporation of GaN powders and then atomic layer deposition of SnO₂. Transmission electron microscopy (TEM) and X‐ray diffraction (XRD) analysis results indicate that the Ga₂O₃ cores and the SnO₂ shells of the coaxial nanowires after thermal annealing are single crystals with monoclinic and simple orthorhombic structures, respectively, although the SnO₂ shells are amorphous before annealing. Our results also show that photoluminescence (PL) emission can be enhanced by thermal annealing in an H₂/N₂ atmosphere. EDX concentration profile suggests that the enhancement in the bluish green emission is due to the increase in the concentration of the Ga vacancies in the cores during the H₂/N₂ annealing. On the other hand, a red emission is newly formed while the bluish green emission is degraded by annealing in an oxygen or nitrogen atmosphere (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Zn掺杂Z形GaN纳米线的制备及表征

本文以氧化镓、氧化锌和氨气为原料,通过常压化学气相沉积法(APCVD)在Au/Si(100)衬底上成功生长出了Zn掺杂的"Z"形GaN纳米线。利用场发射扫描电镜(FESEM)、X-射线衍射仪(XRD)、透射电子显微镜(TEM)、光致发光谱(PL)等测试方法对样品的形貌、晶体结构及光学性质进行了表征。结果表明:在温度为950℃,氧化镓和氧化锌的质量比为8∶1的条件下,制备出的Zn掺杂Z形GaN单晶纳米线直径为70 nm、长度为数十个微米,生长机理遵循VLS机制。Zn元素的掺杂使GaN纳米线在420 nm处出现了光致发光峰,发光性能有所改善。     

Flux Bridgman growth and the influence of annealing temperatures on PL properties of ZnO single crystals

Transparent ZnO crystals were obtained by the flux Bridgman method from high temperature solution of 22 mol% ZnO‐78 mol% PbF₂ system. The influence of annealing temperatures on the photoluminescence (PL) of ZnO crystal was investigated. An ultraviolet emission peak at about 379 nm was observed in PL spectra and the peak position has a weak blueshift for annealed samples. A green band centered at 523 nm appeared in the annealed samples and its intensity enhanced with the increase of annealing temperatures, while the intensity of the ultraviolet peak decreased considerably. However, the ultraviolet emission peak became the strongest after annealing at 1000 °C. This phenomenon was considered to be associated with oxygen vacancy and F^‐ impurities induced by the PbF₂ flux. The results show that high temperature annealing in air seems helpful for improving the PL properties of ZnO crystal. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effects of passivation and postannealing on the photoluminescence properties of MgO/SiO2 core‐shell nanorods

MgO nanorods were grown by the thermal evaporation of Mg₃N₂ powders on the Si (100) substrate coated with a gold thin film. The MgO nanorods grown on the Si (100) substrate were a few tens of nanometers in diameter and up to a few hundreds of micrometers in length. MgO/SiO₂ core‐shell nanorods were also fabricated by the sputter‐deposition of SiO₂onto the MgO nanorods. Transmission electron microscopy (TEM) and X–ray diffraction (XRD) analysis results indicated that the cores and shells of the annealed core‐shell nanorods were a face‐centered cubic‐type single crystal MgO and amorphous SiO₂, respectively. The photoluminescence (PL) spectroscopy analysis results showed that SiO₂ coating slightly decreased the PL emission intensity of the MgO nanorods. The PL emission of the MgO/SiO₂ core‐shell nanorods was, however, found to be considerably enhanced by thermal annealing and strongly depends on the annealing atmosphere. The PL emission of the MgO/SiO₂ core‐shell nanorods was substantially enhanced in intensity by annealing in a reducing atmosphere, whereas it was slightly enhanced by annealing in an oxidative atmosphere. The origin of the PL enhancement by annealing in a reducing atmosphere is discussed with the aid of energy‐dispersive X‐ray spectroscopy analyses. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Enhancement of the emission from TeO2 nanorods by encapsulation with ZnO

TeO₂‐core/ZnO‐shell nanorods were synthesized by a two–step process comprising thermal evaporation of Te powders and atomic layer deposition of ZnO. Scanning electron microscopy images exhibit that the core‐shell nanorods are 50 ‐ 150 nm in diameter and up to a few tens of micrometers in length, respectively. Transmission electron microscopy and X‐ray diffraction analysis revealed that the cores and shells of the core‐shell nanorods were polycrystalline simple tetragonal TeO₂ and amorphous ZnO with ZnO nanocrystallites locally, respectively. Photoluminescence measurement revealed that the TeO₂ nanorods had a weak broad violet band at approximately 430 nm. The emission band was shifted to a yellowish green region (∼540 nm) by encapsulation of the nanorods with a ZnO thin film and the yellowish green emission from the TeO₂‐core/ZnO‐shell nanorods was enhanced significantly in intensity by increasing the shell layer thickness. The highest emission was obtained for 125 ALD cycles (ZnO coating layer thickness: ∼15 nm) and its intensity was much higher than that of the emission from the uncapsulated TeO₂ nanorods. The origin of the enhancement of the emission by the encapsulation is discussed in detail. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Morphology and photoluminescence properties of ZnO nanostructures fabricated with different given time of Ar

ZnO nanostructures were grown on Au‐coated Si (100) substrates by carbonthermal reduction method with the help of Ar at the beginning of growth. The structural and optical properties of ZnO nanostructures strongly depended on the supply time of Ar. When the given time of Ar gas current was 90s, sample was ZnO nanowires with hexagonal morphology. The Raman spectroscopy revealed the low level of oxygen vacancies and Zn interstitials in samples. Room temperature photoluminescence (PL) spectra exhibited the intensity of green emission increased on the condition of rich oxygen (decrease given time of Ar) and the nanowire had strongest intensity of UV emission compared with other nanostructures. Green emission is ascribed to the electron transition from the bottom of the conduction band to the antisite defect O_Zn level. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Conversion from ZnO nanospindles into ZnO/ZnS core/shell composites and ZnS microspindles

The formation process of ZnO/ZnS core/shell microcomposites and ZnS microspindles prepared by the reaction of ZnO colloids and thioacetamide under hydrothermal conditions was investigated in detail by X‐ray powder diffraction, field emission scanning electron microscopy, transmission electron microscopy and selected‐area electron diffraction techniques. The precursors of spindlelike ZnO colloids were prepared by a hydrothermal method with the help of a surfactant. A growth mechanism was proposed to account for the formation of ZnO/ZnS core/shell microcomposites and ZnS microspindles. Luminescence measurement revealed that ZnO/ZnS core/shell microcomposites integrated the luminescence effect of ZnO and ZnS. The blue and green emissions were dramatically enhanced, while the orange emission disappeared. The results provide a good approach to tune the visible emission of the ZnO nanostructures by ZnS coating. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The influence of annealing atmosphere on the optical properties of flower‐like ZnO

The influence of annealing atmosphere on the optical properties of flower‐like ZnO is investigated. The flower‐like ZnO is composed of nanosheets. Annealing at 500°C results in the increase of the thickness of nanosheets and the enhancement of UV emission. PL spectra results show that the annealing atmosphere affects the visible emission band, which is sensitive to intrinsic and surface defects in the flower‐like ZnO. The vibrational properties of the flower‐like ZnO annealing in different atmospheres are characterized by Raman spectra. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optical and magnetic properties of (Zn,Mn)O nanostructures synthesized by CVD method

We report on microstructural, optical and magnetic properties of (Zn,Mn)O nanostructures synthesized by a chemical vapor deposition (CVD) technique. Average diameters of the as grown (Zn,Mn)O nanorods and nanowires were ∼400 nm and ∼50 nm, respectively. X‐ray diffraction (XRD) and photoluminescence (PL) spectra provided the evidence that Mn was incorporated into ZnO lattice. PL spectra of the (Zn,Mn)O nanostructures showed shift in near band edge (NBE) emission at 396 nm together with a green band (GB) emission at 510 nm and a blue band (BB) emission at 460 nm. Magnetic measurements revealed mixed magnetic phases (ferromagnetic and antiferromagnetic) in the (Zn,Mn)O nanostructures. Vapor‐solid‐solid (VSS) mechanism was thought to be responsible for the growth of the nanostructures at low temperatures. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and photoluminescence properties of ZnO nanowire arrays

In this paper we report a chemical method named coordination reaction method to synthesize ZnO nanowire arreys. ZnO nanowires with the diameter about 80nm were successfully fabricated in the channels of the porous anodic alumina (PAA) template by the above coordination reaction method. The microstructures of ZnO/PAA assembly were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X‐ray diffraction (XRD). The results showed that the ZnO nanowires can be uniformly assembled into the nanochannels of PAA template. The growth mechanism of ZnO nanowires and the conditions of the coordination reaction are discussed. Photoluminescence (PL) measurement shows that the ZnO/PAA assembly system has a blue emission band caused by the various defects of ZnO. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystallography and cathodoluminescence of ultra‐long GaN nanowires

Ultra‐long GaN nanowires have been synthesized via a simple thermal evaporation process by heating mixed GaN and Ga₂O₃ powders in a conventional resistance furnace under ammonia gas at 1150 °C. The average length of GaN nanowires is estimated to be more than 100 μm after 30‐min growth, corresponding to a fast growth rate of more than 200 μm/h. Scanning electron microscope (SEM) observation indicated that the diameter of GaN nanowires was rather uniform along the growth direction and in the range of 100–200 nm. X‐ray diffraction (XRD) and transmission electron microscope (TEM) measurements confirmed that the GaN nanowires are crystalline wurtzite‐type hexagonal structure. Room‐temperature cathodoluminescence (CL) measurement indicated that an obvious red‐shift of the near band‐edge emission peak centered at 414 nm of the ultra‐long GaN nanowires and a wide shoulder in the range of 600–700 nm were observed. Possible reasons responsible for the red‐shift of the near band‐edge emission of the ultra‐long GaN nanowires was discussed. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Microstructure and cathodoluminescence study of GaN nanowires without/with P‐doping

In this work, P‐doped GaN nanowires were synthesized in a co‐deposition CVD process and the effects of P‐doping on the microstructure and cathodoluminescence (CL) of GaN nanowires were studied in details. SEM observation and CL measurments demonstrated that P‐doping has led to a rough morphology evolution and a depression of the band‐gap emission of GaN nanowires, whereas the visible emission of GaN nanowires was obviously enhanced. Finally, the corresponding morphology transition and optical properties of GaN nanowires with P‐doping were discussed. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of oxygen partial pressure on the growth of zinc micro and nanostructures

Zinc micro and nanostructures were synthesized in vacuum by condensing evaporated zinc on Si substrate at different gas pressures. The morphology of the grown Zn structures was found to be dependent on the oxygen partial pressure. Depending on oxygen partial pressure it varied from two-dimensional microdisks to one-dimensional nanowire. The morphology and structural properties of the grown micro and nanostructures were studied by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Transmission electron microscopy (TEM) studies on the grown Zn nanowires have shown that they exhibit core/shell-like structures, where a thin ZnO layer forms the shell. A possible growth mechanism behind the formation of different micro and nanostructures has been proposed. In addition, we have synthesized ZnO nanocanal-like structures by annealing Zn nanowires in vacuum at 350 °C for 30 min.     

Growth of undoped and Zn-doped GaN nanowires

Undoped and Zn-doped GaN nanowires were synthesized by chemical vapor deposition (CVD), and the effects of substrates, catalysts and precursors were studied. A high density of GaN nanowires was obtained. The diameter of GaN nanowires ranged from 20 nm to several hundreds of nm, and their length was about several tens of μm. The growth mechanism of GaN nanowires was discussed using a vapor–liquid–solid (VLS) model. Furthermore, room-temperature cathodoluminescence spectra of undoped and Zn-doped GaN nanowires showed emission peaks at 364 and 420 nm, respectively.     

Optical properties of Al‐doped ZnO thin films deposited by two different sputtering methods

Aluminum‐doped zinc oxide (AZO) thin films were deposited on sapphire (002) and glass substrates by two different sputtering techniques radio frequency magnetron cosputtering of AZO and ZnO targets and sputtering of an AZO target. The dependence of the photoluminescence (PL) and transmittance properties of the AZO films deposited by cosputtering and sputtering on the AZO/ZnO target power ratio, R and the O₂/Ar flow ratio, r were investigated, respectively. Only a deep level emission peak appears in the PL spectra of cosputtered AZO films whereas both UV emission and deep level emission peaks are observed in the PL spectra of sputtered AZO films. The absorption edges in the transmittance spectra of the AZO films shift to the lower wavelength region as R and r increase. Also effects of crystallinity, surface roughness, PL on the transmittance of the AZO films were explained using the X‐ray diffraction (XRD), atomic force microscopy (AFM), and PL analysis results. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

硅基AAO模板内电化学沉积ZnO纳米线及其光电性能研究

本文利用二次阳极氧化法在p型低阻〈100〉晶向的硅衬底上制备了AAO/Si,以硅基AAO为辅助模板,采用电化学沉积的方法以Zn(NO3).6H2O和HMT(C6H12N4)为原料,在80℃的水浴槽中制备了ZnO纳米线结构。采用SEM,XRD和拉曼光谱等手段对ZnO/AAO/Si复合结构进行表征。SEM图表明ZnO纳米线已成功组装到AAO/Si模板里,直径约45 nm,长度约为600 nm。XRD和拉曼光谱表明ZnO具有六角纤锌矿多晶结构。光致发光(PL)谱图表明ZnO/AAO/Si复合结构在565 nm附近有较宽黄绿发射峰,在395 nm附近有微弱的紫外发射峰。场发射测试结果表明,ZnO纳米线的场增强因子的β值为2490,场增强因子很高,具有广泛的应用前景。     

A low-temperature aqueous solution route to large-scale growth of ZnO nanowire arrays

A low-temperature template-free aqueous solution route has been successfully employed to fabricate large-scale arrays of highly oriented ZnO nanowires. It is found that the growth of the highly oriented ZnO nanowire arrays is dependent on the reaction time, leading to our proposal on the possible formation mechanism. The obtained ZnO nanowires are single crystalline and have a low defect concentration. Furthermore, the ZnO nanowires exhibit significant optical properties in photoluminescence (PL) emission spectroscopy and Raman spectrum, suggesting that they could find promising potential for opto-electronic application.