Modification of Polysaccharides Through Controlled/Living Radical Polymerization Grafting—Towards the Generation of High Performance Hybrids

This review covers the literature concerning the modification of polysaccharides through controlled radical polymerizations (NMP, ATRP and RAFT). The different routes to well‐defined polysaccharide‐based macromolecules (block and graft copolymers) and graft‐functionalized polysaccharide surfaces as well as the applications of these polysaccharide‐based hybrids are extensively discussed.

     

Phase Separation and Organisation of Colloidal Spheres Suspended in Sheared Lyotropic Liquid‐Crystalline Polymers

Summary: Organisation behaviours of spherical particles suspended in sheared, lyotropic, liquid‐crystalline polymer solutions have been investigated using polarizing optical microscopy. We find that in a nematic phase the particles phase separate and adopt anisotropic chain‐like structures along the director. An earring defect is observed around a single particle whereas a cross or strings defect between neighbouring particles is found to serve as a repulsive barrier to prevent the particles from contacting each other. A theoretical analysis is presented to explain this new phenomenon.

An optical micrograph of 0.01 wt.‐% glass spheres suspended in a nematic solution of 40 wt.‐% ethyl cellulose in chloroform under an external shear force.     

Spontaneous Birefringence in Layer‐by‐Layer Films of Chitosan and Azo Dye Sunset Yellow

Layer‐by‐layer (LBL) films consisting of layers of the azo dye Sunset Yellow alternated with chitosan display spontaneous birefringence, which is attributed to the film anisotropy imparted by the LBL method. This is unusual for azobenzene‐containing materials as they normally form films with randomly oriented molecules, presenting birefringence only due to photoinduced isomerization cycles. Spontaneous birefringence does not appear in cast films, but occurs for LBL films obtained under various experimental conditions.

Chemical structures of (a) Sunset Yellow and (b) chitosan.     

Nanosized‐Silica‐Reinforced Holographic Polymer‐Dispersed Liquid Crystals

Summary: Nanosized silicas added to holographic polymer‐dispersed liquid crystals (HPDLC) provide the resin phase with increased elasticity, dimensional stability, and the high diffraction efficiency of the gratings. On the other hand, nucleation and growth of periodic modulation are delayed, especially with small‐sized silica because of the increased viscosity of the resin mixture. Effects of the LC/resin composition and cell gap on the diffraction efficiency have also been studied.

AFM image of silica added HPDLC.     

Emulsion‐Induced Ordered Microporous Films Based on Micelles of Amphiphilic Poly(ethylene oxide)‐block‐Poly(methyl methacrylate) Diblock Copolymers

Well‐defined PEO‐b‐PMMA was prepared, initiated by macroinitiator PEO‐Br, by means of ATRP, where esterification of the terminal hydroxyl group of PEO with 2‐bromoisobutyryl bromide yielded a macroinitiator PEO‐Br. Highly ordered microporous films (hexagonal pattern) were constructed by emulsion micelles of such amphiphilic diblock copolymer formed from a solution with CHCl₃/H₂O/THF = 100:5:10 (v/v). We also constructed the microporous films using diblock copolymer by the current water‐assisted method.

     

Low thrombogenicity coating of nonwoven PET fiber structures for vascular grafts

Vascular PET grafts (Dacron) have shown good performance in large vessels (≥6 mm) applications. To address the urgent unmet need for small‐diameter (2–6 mm) vascular grafts, proprietary high‐compliance nonwoven PET fiber structures were modified with various PEG concentrations using PVA as a cross‐linking agent, to fabricate non‐thrombogenic mechanically compliant vascular grafts. The blood compatibility assays measured through platelet adhesion (SEM and mepacrine dye) and platelet activation (morphological changes, P‐selectin secretion, and TXB2 production) demonstrate that functionalization using a 10% PEG solution was sufficient to significantly reduce platelet adhesion/activation close to optimal literature‐reported levels observed on carbon‐coated ePTFE.

     

Magneto‐sensitive Elastomers in a Homogeneous Magnetic Field: A Regular Rectangular Lattice Model

A theory of mechanical behaviour of the magneto‐sensitive elastomers is developed in the framework of a linear elasticity approach. Using a regular rectangular lattice model, different spatial distributions of magnetic particles within a polymer matrix are considered: isotropic, chain‐like and plane‐like. It is shown that interaction between the magnetic particles results in the contraction of an elastomer along the homogeneous magnetic field. With increasing magnetic field the shear modulus, G, for the shear deformation perpendicular to the magnetic field increases for all spatial distributions of magnetic particles. At the same time, with increasing magnetic field the Young's modulus, E, for tensile deformation along the magnetic field decreases for both chain‐like and isotropic distributions of magnetic particles and increases for the plane‐like distribution of magnetic particles.

     

Molecular Dynamics Simulations of Helium Permeation in Polyimides with a Bulky Dianhydride and a Fluorinated Diamine

Fully‐atomistic molecular dynamics (MD) simulations have been carried out to model helium transport through four different glassy polyimides. While the polymer matrices had been pre‐validated, specific parameters and combination rules were used here in order to describe helium‐helium and helium‐polymer interactions. Gas permeabilities are in very good agreement with experimental evidence. Two ways to decrease chain cohesion and improve gas transport were considered – the replacement of an ODPA by a bulky BCDA dianhydride, and the substitution of a site on an ODA diamine by a CF₃. The fluorinated polyimide appears to be the most promising material with more heterogeneity in the void‐space distribution, the highest model permeability and fewer constraints from an experimental point of view.

     

IR Laser‐Induced Degradation of Poly(vinyl acetate): Novel Thermal Reactions in Solid Polymers

Summary: Pulsed‐IR laser‐induced decomposition of poly(vinyl acetate) (PVAC) differs remarkably from its conventional pyrolysis, which results in the formation of acetic acid and non‐polar carbonaceous residue. In contrast, the products in the former case are (i) vinyl acetate (low energy channel), (ii) products of cleavage in the acetate group, and (iii) an ablatively deposited polar polymeric film containing roughly half of the acetoxy groups initially present.

Schematic of the different routes of poly(vinyl acetate) degradation.     

Copolymerization of Hepta‐1,6‐diene with Ethylene Catalyzed by Cobalt Complexes

Copolymerization of hepta‐1,6‐diene with ethylene using a cobalt–bis(imino)pyridine complex affords a polymer that contains trans‐1,2‐five‐membered rings in the repeating unit from hepta‐1,6‐diene. The ratio of the repeating units of diene to those of ethylene is controlled from 3: 97 to 50:50, depending on the reaction conditions. Isotope‐labeling reactions reveal that the major chain transfer pathway involves β‐hydrogen elimination of the polymer end formed after ethylene insertion.

     

Large‐Scale Synthesis of Necklace‐Like Single‐Crystalline PbTiO3 Nanowires

Summary: We show in this communication that large‐scale necklace‐like single‐crystalline tetragonal perovskite PbTiO₃ nanowires can be obtained via a simple electrospinning method. The morphology and the crystal structure are investigated by SEM, XRD, and HRTEM. The length of the necklace‐like PbTiO₃ nanowires is from tens to several tens of micrometers, the wider the diameter of it is between 100 and 200 nm and the thinner the part is between 20 and 50 nm. The necklace‐like PbTiO₃ nanowires exhibit high surface photovoltage under the action of external electric field, which is probably applicable in displaying photoelectric devices of heterojunction structure.

SEM image of the electrospinning necklace‐like PbTiO₃ nanowires.     

Synthesis of Well‐Defined Rod‐Coil Diblock Copolymer of Aromatic Polyether and Polyacrylonitrile by Chain‐Growth Condensation Polymerization and Atom Transfer Radical Polymerization

The synthesis of diblock copolymers of aromatic polyether and polyacrylonitrile (PAN) was conducted by chain‐growth condensation polymerization (CGCP) and atom transfer radical polymerization (ATRP) from an orthogonal initiator. When CGCP for aromatic polyether was carried out from a PAN macroinitiator obtained by ATRP with an orthogonal initiator, decomposition of the PAN backbone occurred. However, when ATRP of acrylonitrile was conducted from an aromatic polyether macroinitiator obtained by CGCP followed by introduction of an ATRP initiator unit, the polymerization proceeded in a well‐controlled manner to yield aromatic polyether‐block‐polyacrylonitrile (polyether‐b‐PAN) with low polydispersity. This block copolymer self‐assembled in N,N‐dimethylformamide to form bundle‐like or spherical aggregates, depending on the length of the PAN units in the block copolymer.

     

Synthesis and Characterization of Amphiphilic Biodegradable Copolymer,Poly(aspartic acid‐co‐lactic acid)

An amphiphilic biodegradable polymer, poly(aspartic acid‐co‐lactic acid) (PAL), was synthesized by simply heating a mixture of aspartic acid (Asp) and L ‐lactide without additional catalysts or solvents. The unique branched architecture comprising succinimide units and lactic acid units was confirmed by IR and NMR spectroscopy. A copolymer of sodium aspartate and lactic acid (PALNa) was prepared by reacting PAL with an aqueous sodium hydroxide solution. The PAL was soluble in many organic solvents, while the PALNa was soluble in methanol and water. The hydrolytic degradation behavior of PAL varied with the copolymer composition. A higher Asp content resulted in a faster molecular weight decrease, and introducing glycolic acid units accelerated the degradation rate.

Microphotograph of microsphere of PAL‐1/5.     

Unimolecular Amphiphilic Nanocontainers Based on Dendronized Linear Polymers

Summary: Linear polymeric core, polyethylenimine (PEI), is successfully dendronized divergently using different‐generation polyamidoamine (PAMAM)‐type dendrons. The formed dendronized polymers are further end‐capped using long alkyl acrylate, hexyl acrylate, to give macromolecular amphiphiles, which perform as unimolecular nanocontainers, capable of encapsulating water‐soluble dye in their interiors. The encapsulation properties are found to be generation‐dependent, in which, at higher generations of nanocontainers, the cavity becomes more localized, due to dense packing of the dendrons at their termini.

Dendronization of a linear polymeric core followed by capping with hydrophobic arms.     

A Template‐Free Method toward Urchin‐Like Polyaniline Microspheres

Urchin‐like PANI microspheres with an average diameter of 5–10 µm have been successfully prepared. Their surfaces consist of highly oriented nanofibers of ≈30 nm diameter and 1 µm length. The solvent composition plays an important role in the formation process of urchin‐like PANI microspheres. The structure of the products has been characterized by FT‐IR, UV‐vis, and XRD. To investigate the self‐assembly of urchin‐like PANI microspheres, the effect of polymerization time on the morphology of the products has been studied. The morphological evolution process indicates that the urchin‐like microspheres originate from the self‐assembly of nanoplates, which then grow into urchin‐like microstructures with nanofibers on the surface.

     

Block Copolymers Under Shear Flow

Summary: Microphase separation transition in block copolymer melts and solutions in equilibrium and under shear flow is reviewed. The non‐equilibrium molecular dynamics (NEMD) computer simulation methodology is presented in detail including the derivation of the SLLOD equations of motion, Gaussian thermostat, and operator‐splitting symplectic integrators. Results of our recent NEMD computer simulation studies of diblock copolymers in a selective solvent under shear flow are presented. Shear‐dependent structural, rheological, and microscopical properties are described. New phase transitions are discovered. The parallel‐perpendicular orientational transition in a weak‐strong flow is revealed. Theoretical approaches are reviewed including the Edwards Hamiltonian, Landau‐Ginzburg model, self‐consistent mean field theory, field‐theoretic simulation, as well as the time‐dependent Landau‐Ginzburg framework and its application to the studies of complex fluids.

     

Reversible Photocontrolled Swelling‐Shrinking Behavior of Micron Vesicles Self‐Assembled from Azopyridine‐Containing Diblock Copolymer

Poly(N‐isopropylacrylamide)‐block‐poly{6‐[4‐(4‐pyridyazo)phenoxy] hexylmethacrylate} (PNIPAM‐b‐PAzPy) was synthesized by successive reversible addition‐fragmentation chain transfer (RAFT) polymerization. In a water/tetrahydrofuran (H₂O/THF) mixture, amphiphilic PNIPAM‐b‐PAzPy self‐assembles into giant micro‐vesicles. Upon alternate ultraviolet (UV) and visible light irradiation, obvious reversible swelling‐shrinking of the vesicles was observed directly under an optical microscope. The maximum percentage increase in volume, caused by the UV light, reached 17%. Moreover, the swelling could be adjusted using the UV light power density. The derivation of this effect is due to photoinduced reversible isomerization of azopyridine units in the vesicles.