Synthesis of Well‐Defined Rod‐Coil Diblock Copolymer of Aromatic Polyether and Polyacrylonitrile by Chain‐Growth Condensation Polymerization and Atom Transfer Radical Polymerization

The synthesis of diblock copolymers of aromatic polyether and polyacrylonitrile (PAN) was conducted by chain‐growth condensation polymerization (CGCP) and atom transfer radical polymerization (ATRP) from an orthogonal initiator. When CGCP for aromatic polyether was carried out from a PAN macroinitiator obtained by ATRP with an orthogonal initiator, decomposition of the PAN backbone occurred. However, when ATRP of acrylonitrile was conducted from an aromatic polyether macroinitiator obtained by CGCP followed by introduction of an ATRP initiator unit, the polymerization proceeded in a well‐controlled manner to yield aromatic polyether‐block‐polyacrylonitrile (polyether‐b‐PAN) with low polydispersity. This block copolymer self‐assembled in N,N‐dimethylformamide to form bundle‐like or spherical aggregates, depending on the length of the PAN units in the block copolymer.

     

Synthesis of Well‐Defined Polybenzamide‐block‐Polystyrene by Combination of Chain‐Growth Condensation Polymerization and RAFT Polymerization

Well‐defined diblock copolymers composed of poly(N‐octylbenzamide) and polystyrene were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain‐growth condensation polymerization. Synthesis of a dithioester‐type macro‐CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate‐CTA containing poly(N‐octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N‐octylbenzamide)‐block‐polystyrene with controlled molecular weight and narrow polydispersity.

     

Convenient Method of Chain‐Growth Polycondensation for Well‐Defined Aromatic Polyamides

Summary: For the convenient synthesis of well‐defined poly(N‐octyl‐p‐benzamide)s with low polydispersities, the polycondensation of methyl 4‐octylaminobenzoate ( 1 ) was investigated. Methyl ester monomer 1 polymerized with lithium 1,1,1,3,3,3‐hexamethyldisilazide (LHMDS) in the presence of an initiator in tetrahydrofuran at −10 °C. The highly pure polyamide with a defined molecular weight and a low polydispersity is obtained after simple treatment of the reaction mixture with aqueous NaOH solution, followed by evaporation.

The chain‐growth polycondensation of 4‐octylaminobenzoic acid methyl ester ( 1 ) with lithium 1,1,1,3,3,3‐hexamethyldisilazide (LHMDS) to yield poly(N‐octyl‐p‐benzamide).     

Synthesis of Well‐Defined Telechelic Aromatic Polyamides by Chain‐Growth Polycondensation: Application to the Synthesis of Block Copolymers of Polyamide and Poly(tetrahydrofuran)

Well‐defined telechelic‐type aromatic polyamides having a secondary amino group and a phenyl ester moiety at each chain end were prepared by the chain‐growth polycondensation of phenyl 4‐(octylamino)benzoate ( 1 ) with initiator 2 (N‐tert‐butoxycarbonylated 1 ), followed by deprotection of the N‐protecting group of the initiator unit. This polycondensation was applied to the synthesis of well‐defined di‐ and triblock copolymers of aromatic polyamides and poly(tetrahydrofuran) (poly(THF)) by the reaction of the terminal secondary amino group of the polyamide with the living cationic propagating group of poly(THF).

Block copolymers of polyamide and poly(tetrahydrofuran).     

Preparation of Well‐Defined Diblock Copolymers with Short Polypeptide Segments by Polymerization of N‐Carboxy Anhydrides

Summary: The ring‐opening polymerization of N‐carboxy anhydrides (NCA) of γ‐benzyl‐L ‐glutamate and β‐benzyl‐L ‐aspartate was studied in the presence of an ammonium chloride‐functionalized poly(ethylene oxide) macroinitiator, which possibly prevents side reactions such as NCA deprotonation. Although polymerization initiated by such macroinitiators was found to be quite slow, well‐defined conjugates of poly(ethylene oxide)‐block‐poly(γ‐benzyl‐L ‐glutamate) and poly(ethylene oxide)‐block‐poly(β‐benzyl‐L ‐aspartate) with polydispersity indexes as low as 1.05 were prepared. Moreover, the presence of ammonium chloride chain ends significantly prevented end‐group cyclization of poly(γ‐benzyl‐L ‐glutamate) after polymerization.

Gel permeation chromatograms recorded for the diblock copolymers of poly(ethylene oxide)‐block‐poly(γ‐benzyl‐L ‐glutamate) prepared by N‐carboxy anhydride polymerization initiated either by PEO‐NH₂ macroinitiator or PEO‐NHequation/tex2gif-stack-1.gifCl⁻ macroinitiator.     

Novel Amphiphilic Diblock and Triblock Liquid‐Crystalline Copolymers with Well‐Defined Structures Prepared by Atom Transfer Radical Polymerization

Summary: Based on a hydrophilic poly(ethylene oxide) macroinitiator (PEOBr), a novel amphiphilic diblock copolymer PEO‐block‐poly(11‐(4‐cyanobiphenyloxy)undecyl) methacrylate) (PEO‐b‐PMA(11CB)) was prepared by atom transfer radical polymerization (ATRP) using CuCl/1,1,4,7,10,10‐hexamethyltriethylenetriamine as a catalyst system. An azobenzene block of poly(11‐[4‐(4‐butylphenylazo)phenoxyl]undecyl methacrylate) was then introduced into the copolymer sequence by a second ATRP to synthesize the corresponding triblock copolymer PEO‐b‐PMA(11CB)‐b‐PMA(11Az). Both of the amphiphilic block copolymers had well‐defined structures and narrow molecular‐weight distributions, and exhibited a smectic liquid‐crystalline phase over a wide temperature range.

The amphiphilic triblock copolymer synthesized here.     

Evidence for the Chain‐Growth Synthesis of Statistical π‐Conjugated Donor–Acceptor Copolymers

The synthesis of a series of dithienosilole–benzotriazole donor–acceptor statistical copolymers with various donor–acceptor ratios is reported, prepared by Kumada catalyst‐transfer polymerization. Statistical copolymer structure is verified by ¹H NMR and optical absorption spectroscopy, and supported by density functional theory (DFT) calculations. The copolymers exhibit a single optical absorption band that lies between dithienosilole and benzotriazole homopolymers, which shifts with varying donor–acceptor content. A chain extension experiment using a partially consumed benzotriazole solution as a macroinitiator followed by addition of dithienosilole leads to the synthesis of a statistical dithienosilole–benzotriazole block copolymer from a pure benzotriazole block, demonstrating that both chain extension and simultaneous monomer incorporation are possible using this methodology.

     

New Strategy Targeting Well‐Defined Polymethylene‐block‐Polystyrene Copolymers: The Combination of Living Polymerization of Ylides and Atom Transfer Radical Polymerization

Well‐defined polymethylene‐block‐polystyrene (PM‐b‐PS) diblock copolymers were synthesized via a combination of living polymerization of ylides and atom transfer radical polymerization (ATRP) of styrene. A series of hydroxyl‐terminated polymethylenes (PM‐OHs) with different molecular weight and narrow molecular weight distribution were prepared using living polymerization of ylides following efficient oxidation in a quantitive functionality. Then, the macroinitiators (PM‐MIs ( = 1 900–15 000; PDI = 1.12–1.23)) transformed from PM‐OHs in ≈ 100% conversion initiated ATRPs of styrene to construct PM‐b‐PS copolymers. The GPC traces indicated the successful extension of PS segment ( of PM‐b‐PS = 5 000–41 800; PDI = 1.08–1.23). Such copolymers were characterized by ¹H NMR and DSC.

     

Chain‐growth condensation polymerization of 4‐aminobenzoic acid esters bearing tri(ethylene glycol) side chain with lithium amide base

Chain‐growth condensation polymerization of p‐aminobenzoic acid esters 1 bearing a tri(ethylene glycol) monomethyl ether side chain on the nitrogen atom was investigated by using lithium 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) as a base. The methyl ester monomer 1a afforded polymer with low molecular weight and a broad molecular weight distribution, whereas the polymerization of the phenyl ester monomer 1b at ?20 °C yielded polymer with controlled molecular weight (M_n = 2800–13,400) and low polydispersity (M_w/M_n = 1.10–1.15). Block copolymerization of 1b and 4‐(octylamino)benzoic acid methyl ester ( 2 ) was further investigated. We found that block copolymer of poly 1b and poly 2 with defined molecular weight and low polydispersity was obtained when the polymerization of 1b was initiated with equimolar LiHMDS at ?20 °C and continued at ?50 °C, followed by addition of 2 and equimolar LiHMDS at ?10 °C. Spherical aggregates were formed when a solution of poly 1b in THF was dropped on a glass plate and dried at room temperature, although the block copolymer of poly 1b and poly 2 did not afford similar aggregates under the same conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1357–1363, 2010     

Synthesis and Self‐Assembly of Amphiphilic Diblock Copolymers using a Fluorescently Labeled N‐Alkoxyamine Initiator

Summary: An initiator for nitroxide mediated ‘living’ free radical polymerization was prepared with a fluorescent tag attached to the initiating alkyl radical terminus. This was used to synthesize amphiphilic poly(acrylic acid)‐block‐polystyrene diblock copolymers, which self assembled in a tetrahydrofuran/buffer solution to form structures that are visible by fluorescence.

     

Self‐Assembly in Water of Poly(acrylic acid)‐Based Diblock Copolymers Synthesized by Nitroxide‐Mediated Polymerization

Summary: Amphiphilic diblock copolymers consisting of a hydrophilic block, poly(acrylic acid), and a hydrophobic block, polystyrene, were synthesized by direct nitroxide‐mediated polymerization using the PS block as a macro‐initiator for the first time. Several techniques were used to characterize the amphiphilic block copolymers (size exclusion chromatography, NMR spectroscopy). The proposed method can lead to samples with a broad range of composition and molar mass. Preliminary studies of their self‐assembly in aqueous medium using fluorescence spectroscopy and small‐angle neutron scattering are presented.

Schematic of the formation of the PS‐b‐PAA block copolymers and their micellization in aqueous media.     

RAFT-细乳液法合成PMMA-b-PGMA两嵌段共聚物

以甲基丙烯酸甲酯(MMA)为单体,S-正十二烷基-S′-(α,α′-二甲基-α″-乙酸基)三硫代碳酸酯为链转移剂,经RAFT/细乳液法制得PMMA(PDI 1.44)。以PMMA细乳液为种子乳液,与甲基丙烯酸缩水甘油酯聚合合成了PMMA-b-PGMA两嵌段聚合物(1),其结构和性能经¹H NMR, FT-IR, GPC和DSC确证。结果表明：1的PDI为2.04,玻璃化转变温度为92.35 ℃。     

Defined Poly[styrene‐block‐(ferrocenylmethyl methacrylate)] Diblock Copolymers via Living Anionic Polymerization

Ferrocenylmethyl methacrylate (FMMA) is one of the very few metallocene‐based monomers that are promising candidates for truly living anionic polymerization. Nevertheless, FMMA homopolymers with a narrow polydispersity, or block copolymerization studies that result in satisfying blocking efficiencies, are unknown so far. Here we describe a procedure that leads to highly regular FMMA‐based polymers for the first time, characterized by polydispersity indices (PDI) of less that 1.05 and very high blocking efficiencies (>95%) in sequential copolymerization with styrene. Some of the obtained poly[styrene‐block‐(ferrocenylmethyl methacrylate)]s show unusual microphase morphologies, presumably the consequence of high T_gs causing ‘frustrated’ non‐equilibrium states.

     

Synthesis and Characterization of Helix‐Coil Diblock Copolymers with Controlled Supramolecular Architectures in Aqueous Solution

Summary: A series of helix‐coil diblock copolymers based on poly(ethylene oxide) and optically active helical poly{(+)‐2,5‐bis[4′‐((S)‐2‐methylbutoxy)phenyl]styrene} (PMBPS) were synthesized via atom transfer radical polymerization (ATRP). The synthetic methodology permitted straightforward preparation of the diblock copolymers with relatively low polydispersities and a broad range of compositions and molecular weights. Depending on the composing block length and the initial concentration, the copolymers self‐assembled into different supramolecular structures in aqueous solution, including spherical micelles, vesicles, multilamellar vesicles, large compound vesicles, and tubules.

Schematic representation of the synthesis of PEO‐b‐PMBPS block copolymers and their aggregation in aqueous solution.     

A Theoretical Exploration of the Potential of ICAR ATRP for One‐ and Two‐Pot Synthesis of Well‐Defined Diblock Copolymers

Kinetic Monte Carlo simulations are performed to investigate the capability of ICAR ATRP for the synthesis of well‐defined poly(isobornyl acrylate‐b‐styrene) block(‐like) copolymers using one‐pot semi‐batch and two‐pot batch procedures. The block copolymer quality is quantified via a block deviation (〈BD〉) value. For 〈BD〉 values lower than 0.30, the quality is defined as good and for well‐chosen polymerization conditions the formation of homopolymer chains upon addition of the second monomer can be suppressed. A better block quality is obtained when isobornyl acrylate is polymerized first. For lower Cu levels a one‐pot semi‐batch procedure allows a much faster ATRP and better control over the polymer properties than a two‐pot batch procedure.

     

Synthesis of Block Copolymers Modified with Phosphonate Ester Groups Using Nitroxide‐Mediated Radical Polymerization

Summary: Phosphonate groups were introduced into block copolymers of styrene derivatives either as single end‐groups or as small blocks using nitroxide‐mediated radical polymerization. In order to combine the hydrophobic and hydrophilic segments, block copolymers with N,N‐dimethyl acrylamide were synthesized. After hydrolysis to phosphonic acid groups, adsorption of the polymer onto metal oxides was possible.

Conversion of the phosphonate groups by transesterification with trimethylbromosilane (TMBS), followed by hydrolysis of the silylester group.     

Chain‐growth condensation polymerization approach to synthesis of well‐defined polybenzoxazole: Importance of higher reactivity of 3‐amino‐4‐hydroxybenzoic acid ester compared to 4‐amino‐3‐hydroxybenzoic acid ester

Application of chain‐growth condensation polymerization (CGCP) to obtain well‐defined polybenzoxazole (PBO) was examined. CGCP of both phenyl 3‐{(2‐methoxyethoxy)methoxy (MEM‐oxy)}‐4‐(octylamino)benzoate ( 1b ) (para‐substituted monomer) and phenyl 4‐MEM‐oxy‐3‐(octylamino)benzoate ( 3b ) (meta‐substituted monomer) was examined in the presence of metal disilazide base and phenyl 4‐nitro‐ or methylbenzoate 2 as an initiator. Polymerization of the latter monomer, but not the former, afforded polymer with controlled molecular weight based on the feed ratio of monomer to initiator and with a narrow molecular weight distribution. Accordingly, monomer 3c , in which the octyl group on the amino nitrogen of 3b was replaced with a 4‐(octyloxy)benzyl (OOB) group, was polymerized in the presence of lithium 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS), phenyl 4‐methylbenzoate ( 2b ), and LiCl in THF at 0 °C to yield poly 3c with well‐defined molecular weight (M_n = 4520–9080) and low polydispersity (M_w/M_n ≤ 1.11). Treatment of poly 3c with trifluoroacetic acid simultaneously removed the MEM and OOB groups, affording poly(o‐hydroxyamide) (poly 4 ) without scission of the amide linkages. Cyclodehydration of poly 4 proceeded at 350 °C to yield PBO (poly 5 ), which was insoluble in organic solvents and acids. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1730–1736