A series of organic‐inorganic hybrid particles were synthesized by a self‐assembled layer of different initiators, immobilized on silica particles and used for controlled radical polymerization. We use three different initiator systems for atom‐transfer radical polymerization (ATRP), unimolecular nitroxide mediated polymerization (NMP), and bimolecular NMP, for the development of the hybrid inorganic/organic particles. After preliminary qualitative characterization by X‐ray spectroscopy (XPS) and Fourier‐transformed infrared (FT‐IR) measurements, the hybrid nanoparticles were studied by thermogravimetric analysis (TGA) to determine and discuss the initiator graft density in terms of steric hindrance.
The coupling agents employed for the various approaches used here: a) NMP1‐bimolecular system, b) NMP2‐unimolecular system, and c) ATRP. 相似文献
Summary: The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles was performed in situ by the ring‐opening polymerization of the oxirane monomer initiated from the mineral surface using aluminium isopropoxide as an initiator/heterogeneous catalyst. Alcohol groups were first introduced onto silica by reacting the surfacic silanols with prehydrolyzed 3‐glycidoxypropyl trimethoxysilane. The alcohol‐grafted silica played the role of a coinitiator/chain‐transfer agent in the polymerization reaction and enabled the formation of irreversibly bonded polymer chains. Silica nanoparticles containing up to 40 wt.‐% of a hairy layer of grafted PEO chains were successfully produced by this technique.
The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles by in‐situ ring‐opening polymerization of the oxirane monomer. 相似文献
We have created a new functional biosensor coating composed of polyelectrolyte multilayers containing gold nanoparticles. This gold‐hybridized polyelectrolyte multilayer film possesses a stable nanoporous structure under physiological conditions. Antibody molecules were successfully conjugated onto the gold nanoparticles within the film. This functional coating successfully extinguished false signals from non‐specific binding of proteins and cells and also provided highly enhanced detection sensitivity. Furthermore, the drastic differences in protein and cellular adhesion properties between a chip coated with the nanoporous PEM film and a bare chip demonstrate that morphological control of biological interactions on chip surfaces is possible.
A polymeric film of a biodegradable poly(p‐dioxanone) was grown from 490 nm silica particles by monolayer formation via self‐assembly of hydroxy‐terminated triethoxysilane and subsequent surface‐initiated ring‐opening polymerization of p‐dioxanone. The resulting silica/poly(p‐dioxanone) hybrid particles were characterized by means of 1H NMR spectroscopy, IR spectroscopy, thermogravimetric analysis, field‐emission scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy.
A facile approach is proposed to one‐pot synthesis of two kinds of nanoparticles: a new type of PS nanobowls (a hole appearing at the bottom of nanobowl) and PS/silica hybrid multipod‐like nanoparticles. The two type of nanoparticles generated together during polymerization could be separated easily by centrifugation. Furthermore, the structure of nanobowls could be easily controlled by the weight ratio of monomer/silica. In addition, we find that the multipod‐like nanoparticles play important roles in hydrophobic properties. The water contact angle increased from 24.0° to 143.3° after coated with the multipod‐like nanoparticles.
Stable nanoparticle vesicles were for the first time prepared from adamantyl‐ and cyclodextrin (CD)‐modified silica nanoparticles forming host–guest interactions in aqueous solution. Adamantyl‐functionalized nanoparticles were obtained from thiol‐isocyanate reaction of thiol‐modified nanoparticles with 1‐adamantyl isocyanate. The CD modified silica particles were isolated from a reaction of mono‐6‐para‐toluenesulfonyl‐β‐cyclodextrin with the thiol functionalized silica under microwave conditions in basic media. The obtained particles were characterized in respect of agglomeration and self‐assembly behavior in aqueous solution by dynamic light scattering and transmission electron microscopy. The found vesicle structures are exceptionally stable even after evaporation of water. Such inorganic hollow spheres formed through self‐assembly processes may be important for chemical storage and transport. The technique of chemically‐driven assembly is an attractive option to form useful complex structures by tunable agglomeration.
A series of monodisperse six‐arm benzene‐cored star oligofluorenes are prepared by a divergent/convergent strategy, starting from the repetitive divergent synthesis of symmetrical ethynyl‐bridged oligofluorenes to the convergent Co‐catalyzed alkyne cyclotrimerization. The structures of these six‐arm molecules are fully characterized. The diameter of the largest molecule SF3 reaches ca. 3 nm. These highly substituted star‐shaped oligomers exhibit extremely high fluorescent quantum yields in solution and unexpected red‐shifted and broadened emission with fine structure in the film as a result of the formation of stable aggregates.
si‐RAFT polymerization is widely used for surface modification. However, how the surface radicals terminate requires further elucidation. A kinetic model is developed for si‐RAFT via the R group approach. The model describes the molecular weight of grafted polymers as well as polymer layer thickness and various chain concentrations. It is shown that surface/surface radical termination plays an important role. The termination is facilitated by the migration of surface radicals through “hopping” and “rolling” mechanisms. “Hopping” occurs through activation/deactivation cycles between surface and solution chains, dependent on the RAFT concentration in solution. “Rolling” occurs through transfers between surface/surface chains, dependent on the grafting density at surface.
We have discovered a novel method to prepare a protein‐based hydrogel, that is, a ‘three‐dimensional nanostructured protein hydrogel’ (3D NPH), which is composed of loosely inter‐connected protein–polymer hybrid nanoparticles. The 3D NPH can be easily prepared by spotting a protein/polymer mixture on a substrate. Surprisingly, gold nanoparticles carrying protein molecules easily diffuse into the 3D NPH through pores and spaces. We have shown that the protein chip made by our 3D NPH method has tremendously improved sensitivity in detecting protein–protein interactions compared with that by direct protein immobilization methods.
Novel glucosamine hydrochloride functionalized water‐soluble conjugated polyfluorene was easily synthesized through Cu(I)‐catalyzed azide/alkyne “click” ligation and Suzuki coupling polymerization. The water‐solubility and biocompatibility of the polymer were improved after grafting glucosamine hydrochloride to the side chains of the conjugated polymer. As a fluorescent model system of chitosan, its interaction with single‐stranded DNA was studied by spectrofluorometric titration.
We have synthesized a “universal ligand” incorporating a phosphonate surface anchor and a terminal alkyne moiety which binds to TiO2 nanoparticles and exhibits excellent dispersity in organic solvents. The alkyne functionality permits attachment of azide terminated polymer shells using “click” chemistry. Thus TiO2 core nanoparticles have been encapsulated with both polystyrene and poly(t‐butyl acrylate) shells. The TiO2‐poly(t‐butyl acrylate) core shell nanoparticles are amenable to further chemical transformation into TiO2‐poly(acrylic acid) nanoparticles through ester hydrolysis. These TiO2‐polyacrylic acid nanoparticles are dispersible in aqueous solution. The resulting core‐shell nanoparticles have been incorporated as high K dielectric films in capacitor and organic thin film transistor devices and are promising new materials for flexible electronics applications.
Summary: The influence of architecture on ink‐jet printability of polymer solutions is investigated by comparing linear and 6‐arm star PMMA. At comparable concentration and molecular weight, filament formation is much more pronounced for linear PMMA than for star PMMA. Visual examination of filament stretching allows estimation of the involved elongation rates, which are at high voltages sufficiently large for coil‐stretch transition of the chains, suggesting its role in filament formation.
The results obtained in this study suggest a possible role of the coil‐stretch transition of the polymer chains in filament formation. 相似文献
Two kinds of representative polymers, poly(N‐isopropylacrylamide) (PNIPAAm) and β‐cyclodextrin (β‐CD) were selected and modified with azide and alkyne fucntional groups, respectively. When the solutions of these two modified polymers were mixed together, a cross‐linking reaction, a type of Huisgen's 1,3‐dipolar azide‐alkyne cycloaddition, occurred in the presence of Cu(I) catalyst. The strategy described here provides several advantages for the hydrogel formation including mild reaction conditions and controllable gelation rate. The resulted hydrogels were studied in terms of scanning electric microscopy (SEM), equilibrium swelling ratio and swelling/shrinking kinetics. The data obtained demonstrated the hydrogels had a porous structure as well as favorable thermosensitivity.
An optimum nanoprecipitation technique for gelatin nanoparticles is established, based on aqueous gelatin solution and ethanolic solution containing stabilizer. Crosslinking with glutaraldehyde results in stable gelatine nanoparticles. Several factors such as the surfactant concentration, type of surfactant, type of nonsolvent and gelatin concentration are evaluated. Gelatin nanoparticles with 200–300 nm can be produced using 20–30 mg mL?1 of gelatin and a minimum of 7% w/v stabilizer (Poloxamer 407 or 188). Furthermore, methanol and ethanol are good nonsolvents, whereas other nonsolvents such as acetone, isopropyl alcohol, and acetonitrile, result in phase separation and visible precipitates. The entrapment efficiency of fluorescein‐isothiocyanate (FITC)‐dextran as model drug was determined to 50% with no substantial effect on particle size. 80% of the drug is only released after enzymatic digestion.
Summary: A high‐molecular‐weight fluorinated poly(aryl ether) with a 4‐bromophenyl pendant group has been synthesized based on a bromo‐bisphenol. A phosphonic acid derivative is readily prepared from this in high conversion yield. The phosphonated polymer possesses excellent thermal, oxidative, and dimensional stability, low methanol permeability, and reasonable proton conductivity, and may be a candidate polymeric electrolyte membrane for fuel cell applications.
Synthesis of a poly(aryl ether) with a phosphonic acid group. 相似文献
PS grafted silica nanoparticles have been prepared by a tandem process that simultaneously employs RAFT polymerization and click chemistry. In a single pot procedure, azide‐modified silica, an alkyne functionalized RAFT agent and styrene are combined to produce the desired product. As deduced by thermal gravimetric and elemental analysis, the grafting density of PS on the silica in the tandem process is intermediate between analogous “grafting to” and “grafting from” techniques for preparing PS brushes on silica. Relative rates of RAFT polymerization and click reaction can be altered to control grafting density.
The functionalization of magnetite (Fe3O4) nanoparticles with dopamine‐derived clickable biomimetic anchors is reported. Herein, an alkyne‐modified catechol‐derivative is employed as the anchor, as i) the catechol‐functional anchor groups possess irreversible covalent binding affinity to Fe3O4 nanoparticles, and ii) the alkyne terminus enables further functionalization of the nanoparticles by the grafting‐onto approach with various possibilities offered by ‘click’ chemistry. In the present work, azido‐end group functionalized Rhodamine and poly(ethylene glycol) (PEG) are utilized to coat the iron oxide nanoparticles to make them fluorescent and water soluble.
High molecular weight poly(9,10‐bis(p‐(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinylene) (2,6‐PAV) was synthesized with 2,6‐dimethylanthraquinone as a key intermediate. The as‐synthesized polymer is readily soluble in common organic solvents and can be used for spin‐coating. The as‐synthesized polymer exhibits a broad absorption band ranging from 280 to 520 nm and a bluish green emission band with a peak at 500 nm. The polymer shows good thermal stability, and no distinct glass transition is observed. A simple device with the configuration ITO/PEDOT:PSS/2,6‐PAV/Ba/Al showed a turn‐on voltage of 4.8 V and a maximal brightness of 340 cd · m−2.
