光的力学效应及光阱力的测量

介绍一个利用光镊技术直观地演示光的力学效应的实验。简要讨论了开设这一实验的背景和目的，给出了光镊原理、实验装置、光阱力的测量方法和实验安排。     

An estimation of the baseband transfer function of multimode optical fibers

This paper discusses an alternative criterion for estimating the baseband transfer function of multimode optical fibers. The optical fibers having little mode conversions show that the baseband frequency characteristics are affected strongly by the launching condition of an input optical pulse. In the criterion presented here, the baseband transfer function in such fibers is estimated by considering the launching condition that excites all fiber modes uniformly in amplitudes. In order to obtain such a transfer function, the actual responses affected by the launching conditions are measured together with the modal power distributions for different kinds of launching conditions. A numerical procedure is then presented that enables us to derive the baseband transfer function independently of modal power distributions. Experimental results at λ x= 633 nm and 856 nm are presented for step index fibers (0.1 and 0.2 km long) having a core radius of 30 pm (its refractive index is 1.452) and a refractive index difference of 0.7%.     

高斯光束与谐振腔基模模式光路谐振匹配的分析与校准

为了降低高斯光束与谐振腔耦合过程中失调量和失配量对基于无源谐振腔测量技术精度的影响, 采用高斯光束变换规律、模式耦合有关理论以及光束传播坐标变换等相关理论, 就失调量和失配量对基模耦合效率的影响分别进行分析和模拟, 并据此给出了一般情况下两个参考量同时存在时基模耦合效率的表达式. 分析表明: 失配量的存在主要影响激光器与谐振腔的耦合效率, 而对高阶模式的激发影响较小, 因此对谐振腔的衰减线型影响较小; 失调量的存在对谐振腔高阶模式的激发起主要作用, 给测量带来严重误差. 该结论为利用腔出射光信号来确定误调参量值的实验方案提供了依据. 因此, 在考虑光源光谱线宽的情况下, 就光源光谱线宽的特性提出两种装调校准方案: 基于法布里-珀罗干涉仪法和基于多维象限探测器探测谐振腔出射光的调节回路, 这将为分析基于无源谐振腔的相关技术测量误差来源以及实现测量系统的高精度装调提供理论指导.     

Enhanced light‐vapor interactions and all optical switching in a chip scale micro‐ring resonator coupled with atomic vapor

The coupling of atomic and photonic resonances serves as an important tool for enhancing light‐matter interactions and enables the observation of multitude of fascinating and fundamental phenomena. Here, by exploiting the platform of atomic‐cladding wave guides, the resonant coupling of rubidium vapor and an atomic cladding micro ring resonator is experimentally demonstrated. Specifically, cavity‐atom coupling in the form of Fano resonances having a distinct dependency on the relative frequency detuning between the photonic and the atomic resonances is observed. Moreover, significant enhancement of the efficiency of all optical switching in the V‐type pump‐probe scheme is demonstrated. The coupled system of micro‐ring resonator and atomic vapor is a promising building block for a variety of light vapor experiments, as it offers a very small footprint, high degree of integration and extremely strong confinement of light and vapor. As such it may be used for important applications, such as all optical switching, dispersion engineering (e.g. slow and fast light) and metrology, as well as for the observation of important effects such as strong coupling, and Purcell enhancement.

     

Transverse optical patterns for ultra‐low‐light‐level all‐optical switching

We review recent theoretical and experimental efforts toward developing an all‐optical switch based on transverse optical patterns. Transverse optical patterns are formed when counterpropagating laser beams interact with a nonlinear medium. A perturbation, in the form of a weak switch beam injected into the nonlinear medium, controls the orientation of the generated patterns. Each state of the pattern orientation is associated with a state of the switch. That is, information is stored in the orientation state. A realization of this switch using a warm rubidium vapor shows that it can be actuated by as few as 600 ± 40 photons with a response time of 5 µs. Models of nonlinear optical interactions in semiconductor quantum wells and microresonators suggest these systems are also suitable for use as fast all‐optical switches using this same conceptual design, albeit at higher switching powers.     

Chemical‐assisted femtosecond laser writing of optical resonator arrays

The design of micro‐optical resonator arrays are introduced and tailored towards refractive index sensing applications, building on the previously unexplored benefits of open dielectric stacks. The resonant coupling of identical hollow cavities present strong and narrow spectral resonance bands beyond that available with a single Fabry Perot interferometer. Femtosecond laser irradiation with selective chemical etching is applied to precisely fabricate stacked and waveguide‐coupled open resonators into fused silica, taking advantage of small 12 nm rms surface roughness made available by the self‐alignment of nanograting planes. Refractive index sensing of methanol‐water solutions confirm a very attractive sensing resolution of 6.5 × 10⁻⁵ RIU. Such high finesse optical elements open a new realm of optofluidic sensing and integrated optical circuit concepts for detecting minute changes in sample properties against a control solution that may find importance in chemical and biological sensors, telecom sensing networks, biomedical probes, and low‐cost health care products.

     

Fiber‐optic sensor active networking with distributed erbium‐doped fiber and Raman amplification

This work is meant to provide a review of different multiplexing topologies employing distributed erbium‐doped fiber and Raman amplification to solve the problem of power‐loss compensation in fiber‐optic sensor (FOS) networks. This is a key parameter in large multiplexing networks, particularly when employing intensity‐modulated sensors. These topologies are studied both theoretically and experimentally, and a comparative analysis is carried out between them. The main parameters considered in the analysis are power budget, optical signal‐to‐noise ratios, scalability and architecture complexity.     

Q‐switched and modelocked all‐fiber lasers based on advanced acousto‐optic devices

The interest in all‐fiber lasers is stimulated by the inherent advantages they have over bulk lasers in aspects such as heat dissipation and robustness. The performance of Q‐switched and modelocked fiber lasers can benefit enormously from the development of all‐fiber configurations. A fiber laser with strictly all‐fiber components can fulfil the requirements of mechanical stability, low maintenance, enhanced power efficiency, simplified assembly process, and low cost. In this framework, recent developments infiber acousto‐optic devices are reviewed that have demonstrated new possibilities for actively Q‐switched distributed feedback fiber lasers, modelocking lasers and doubly active Q‐switched modelocked lasers. The aim is to demonstrate the great potential of infiber devices for the active control of different types of fiber lasers.     

Optical‐fiber microcoil waveguides and resonators and their applications for interferometry and sensing

In this work, recent progress in the theoretical and experimental studies of optical‐fiber microcoil waveguides and resonators, as well as their various applications are reviewed. In particular, the focus is set on sensing and interferometry applications. It is shown that due to its inherently low propagation and fiber‐coupling losses, fiber‐microcoil based sensors and interferometers offer substantial enhancement of sensitivity and compactness compared to other types of devices. Recent progress in the realization and experimental characterization of such structures is presented and the theoretical tools to analyze the impact of real‐world nonuniformities on the characteristics of fiber‐microcoil structures are provided.     

Few‐optical‐cycle light pulses with passive carrier‐envelope phase stabilization

One of the most advanced frontiers of ultrafast optics is the control of carrier‐envelope phase (CEP) ϕ of light pulses, which enables the generation of optical waveforms with reproducible electric field profile. Such control is important for pulses with few‐optical‐cycle duration, for which a CEP variation produces a strong change in the waveform, so that strongly nonlinear optical phenomena, such as multiphoton absorption, above‐threshold ionization and high‐harmonic generation become CEP‐dependent. In particular, CEP control is the prerequisite for the production of isolated attosecond pulses. Standard laser systems generate pulses that are CEP unstable; the CEP can be stabilized using either active or passive methods. Passive, all‐optical schemes rely on difference‐frequency generation (DFG) between two pulses sharing the same CEP: in this process the phases of the two pulses add up with opposite signs, leading to cancellation of the shot‐to‐shot CEP fluctuations. This paper presents an overview of passive CEP stabilization schemes, starting from the basic concepts and progressing to the details of the practical implementations of the idea. The passive approach allows the generation of CEP‐controlled few‐optical‐cycle pulses covering a very broad range of parameters in terms of carrier frequency (from visible to mid‐IR), energy (up to several mJs) and repetition rate (up to hundreds of kHz)     

Nonlinear optical fiber based high resolution all‐optical waveform sampling

When there is a need to accurately characterize optical waveforms and, it is not surprising that some of the best, albeit only recently established, techniques to do this rely on all‐optical phenomena. Some basic reasons why all‐optical sampling holds great promise as a very useful tool well into the foreseeable future are that there are no ringing phenomena with associated waveform distortion as in electronic sampling due to impedance mismatch, and that the time resolution can be made extremely high (⩽ 1 ps) while yet also offering high sensitivity for e.g. eye diagram (a superposition of all ‘1’ and ‘0’ in a data sequence that is widely used in telecommunications testing) and statistical analysis. In this paper, we review recent developments in optical fiber‐based sampling of optical waveforms. In particular, we describe the state‐of‐the‐art in terms of the various performance measures as well as their trade‐offs.     

Tens of GHz Tantalum pentoxide‐based micro‐ring all‐optical modulator for Si photonics

A tantalum pentoxide‐based (Ta₂O₅‐based) micro‐ring all‐optical modulator was fabricated. The refractive index inside the micro‐ring cavity was modified using the Kerr effect by injecting a pumped pulse. The transmittance of the ring resonator was controlled to achieve all‐optical modulation at the wavelength of the injected probe. When 12 GHz pulses with a peak power of 1.2 W were coupled in the ring cavity, the transmission spectrum of the Ta₂O₅ resonator was red‐shifted by 0.04 nm because of the Kerr effect. The relationship between the modulation depth and gap of the Ta₂O₅ directional coupler is discussed. An optimized gap of 1100 nm was obtained, and a maximum buildup factor of 11.7 with 84% modulation depth was achieved. The nonlinear refractive index of Ta₂O₅ at 1.55 μm was estimated as 3.4 × 10^?14 cm²/W based on the Kerr effect, which is almost an order of magnitude higher than that of Si₃N₄. All results indicate that Ta₂O₅ has potential for use in nonlinear waveguide applications with modulation speeds as high as tens of GHz.

     

Quantum‐optical analogies using photonic structures

Engineered photonic waveguides have provided in the past decade an extremely rich laboratory tool to visualize with optical waves the classic analogues of a wide variety of coherent quantum phenomena encountered in atomic, molecular or condensed‐matter physics. As compared to quantum systems, optics offers the rather unique advantage of a direct mapping of the wave function evolution in coordinate space by simple fluorescence imaging or scanning tunneling optical microscopy techniques. In this contribution recent theoretical and experimental advances in the field of quantum‐optical analogies are reviewed. Special attention is devoted to some relevant optical analogies based on the use of curved photonic structures, including: coherent destruction of tunneling in driven bistable potentials; coherent population transfer and adiabatic passage in laser‐driven multilevel atomic systems; quantum decay control and Zeno dynamics; electronic Bloch oscillations and Zener tunneling, Anderson localization and dynamic localization in crystalline potentials.     

光导纤维中光速的实验测定

介绍了光导纤维中光速测定的基本原理。采用调制信号，应用门电路测量了两路输入信号的相差，计算出调制信号在光导纤维中的传输时间，从而得到光速。     

Random‐access distributed fiber sensing

Optical sensing offers an attractive solution to the societal concern for prevention of natural and human‐generated threats and for efficient use of natural resources. The unprecedented properties of optical fibers make them ideal for implementing a ‘nervous system’ in structural health monitoring: they are small, low‐cost and electrically and chemically inert. In particular, the nonlinear interaction of stimulated Brillouin scattering allows for the distributed measurement of strain and temperature with tens of km range. In this work, a novel, radar‐inspired technique for random‐access Brillouin scattering‐based sensors is shown, making a significant step towards a real optical sensing nerve. The method selectively addresses each fiber segment as a distinct sensing element in a synaptic neuronal system. The measurement principle relies on phase‐coding of both the Brillouin pump and signal waves by a high‐rate, pseudo‐random bit sequence. Temperature measurements with 1 cm resolution are reported. The measurement range is scalable to several km.     

III‐V/silicon photonics for on‐chip and intra‐chip optical interconnects

In this paper III‐V on silicon‐on‐insulator (SOI) heterogeneous integration is reviewed for the realization of near infrared light sources on a silicon waveguide platform, suitable for inter‐chip and intra‐chip optical interconnects. Two bonding technologies are used to realize the III‐V/SOI integration: one based on molecular wafer bonding and the other based on DVS‐BCB adhesive wafer bonding. The realization of micro‐disk lasers, Fabry‐Perot lasers, DFB lasers, DBR lasers and mode‐locked lasers on the III‐V/SOI material platform is discussed.     

球形光纤端面效应及其应用

本文介绍了球形光纤端面的制作方法,采用射线理论和等效透镜法分析了圆球形端面多模光纤的端面效应,并给出了两个不同端面多模光纤之间耦合的实验结果。结果表明：圆球形端面光纤具有聚光特性,与平端面相比,使用圆球形端面光纤不仅可以提高光器件之间的耦合效率,而且增大了它们之间的耦合距离,利于光路调试;可广泛应用于光源与光纤、光纤与光纤、光纤与探测器之间的耦合。     

All‐optical modulation based on silicon quantum dot doped SiOx:Si‐QD waveguide

All‐optical modulation based on silicon quantum dot doped SiO_x:Si‐QD waveguide is demonstrated. By shrinking the Si‐QD size from 4.3 nm to 1.7 nm in SiO_x matrix (SiO_x:Si‐QD) waveguide, the free‐carrier absorption (FCA) cross section of the Si‐QD is decreased to 8 × 10⁻¹⁸ cm² by enlarging the electron/hole effective masses, which shortens the PL and Auger lifetime to 83 ns and 16.5 ps, respectively. The FCA loss is conversely increased from 0.03 cm⁻¹ to 1.5 cm⁻¹ with the Si‐QD size enlarged from 1.7 nm to 4.3 nm due to the enhanced FCA cross section and the increased free‐carrier density in large Si‐QDs. Both the FCA and free‐carrier relaxation processes of Si‐QDs are shortened as the radiative recombination rate is enlarged by electron–hole momentum overlapping under strong quantum confinement effect. The all‐optical return‐to‐zero on‐off keying (RZ‐OOK) modulation is performed by using the SiO_x:Si‐QD waveguides, providing the transmission bit rate of the inversed RZ‐OOK data stream conversion from 0.2 to 2 Mbit/s by shrinking the Si‐QD size from 4.3 to 1.7 nm.     

Mapping the near fields of plasmonic nanoantennas by scattering‐type scanning near‐field optical microscopy

Near‐field optical microscopy techniques provide information on the amplitude and phase of local fields in samples of interest in nanooptics. However, the information on the near field is typically obtained by converting it into propagating far fields where the signal is detected. This is the case, for instance, in polarization‐resolved scattering‐type scanning near‐field optical microscopy (s‐SNOM), where a sharp dielectric tip scatters the local near field off the antenna to the far field. Up to now, basic models have interpreted S‐ and P‐polarized maps obtained in s‐SNOM as directly proportional to the in‐plane ( or ) and out‐of‐plane () near‐field components of the antenna, respectively, at the position of the probing tip. Here, a novel model that includes the multiple‐scattering process of the probing tip and the nanoantenna is developed, with use of the reciprocity theorem of electromagnetism. This novel theoretical framework provides new insights into the interpretation of s‐SNOM near‐field maps: the model reveals that the fields detected by polarization‐resolved interferometric s‐SNOM do not correlate with a single component of the local near field, but rather with a complex combination of the different local near‐field components at each point (, and ). Furthermore, depending on the detection scheme (S‐ or P‐polarization), a different scaling of the scattered fields as a function of the local near‐field enhancement is obtained. The theoretical findings are corroborated by s‐SNOM experiments which map the near field of linear and gap plasmonic antennas. This new interpretation of nanoantenna s‐SNOM maps as a complex‐valued combination of vectorial local near fields is crucial to correctly understand scattering‐type near‐field microscopy measurements as well as to interpret the signals obtained in field‐enhanced spectroscopy.