Fabrication of Micropatterned Gold Nanoparticle Arrays as a Template for Surface‐Initiated Polymerization of Stimuli‐Responsive Polymers

Summary: This paper demonstrates a new, reliable, and simple method for fabricating micropatterned nanoparticle arrays that can serve as templates for the surface‐initiated polymerization of polymer brushes. As a proof of concept, we micropatterned gold nanoparticles (Au‐NPs, ≈10 nm) onto glass, silicon, polystyrene, and gold surfaces by a simple three‐step process: (1) microcontact printing of soluble polymer, (2) incubation with a solution of Au‐NPs, and (3) lift‐off of the template in a mixture of ethanol and deionized water. 40 µm wide features were successfully fabricated without any significant defects or nonspecific adsorption on the background. To demonstrate the utility of these Au‐NP templates, we subsequently polymerized N‐isopropylacrylamide by surface‐initiated polymerization, using a surface‐bound initiator.

Synthesis of PNIPAAm brushes from micropatterned Au‐NP.     

Directly Fabricating Monolayer Nanoparticles on a Polymer Surface by UV‐Induced MMA/DVB Microemulsion Graft Polymerization

Summary: A sequential two‐step method was successfully used for the photografting of methyl methacrylate/1,2‐divinylbenzene (MMA/DVB) microemulsion onto the surface of a poly(propylene) (PP) film. Atomic force microscopy (AFM) images showed that nanoparticles with a cross‐section diameter of 60 nm were directly grafted onto the substrate's surface. Environment scanning electron microscope (ESEM) images proved that the particles formed just a single layer on the surface. The dormant groups on the nanoparticles' surface were a potential factor in the evolution of single layer into multilayer nanoparticles.

The surface morphology of a PP film after being grafted with a MMA/DVB microemulsion. Nanoparticles (about 60 nm in size) are clearly tethered onto the substrate's surface with just one layer.     

Facile “Living” Radical Polymerization of Methyl Methacrylate in the Presence of Iniferter Agents: Homogeneous and Highly Efficient Catalysis from Copper(II) Acetate

A facile homogeneous polymerization system involving the iniferter agent 1‐cyano‐1‐methylethyl diethyldithiocarbamate (MANDC) and copper(II) acetate (Cu(OAc)₂) is successfully developed in bulk using methyl methacylate (MMA) as a model monomer. The detailed polymerization kinetics with different molar ratios (e.g., [MMA]₀/[MANDC]₀/[Cu(OAc)₂]₀ = 500/1/x (x = 0.1, 0.2, 0.5, 1.0)) demonstrate that this system has the typical “living”/controlled features of “living” radical polymerization, even with ppm level catalyst Cu(OAc)₂, first order polymerization kinetics, a linear increase in molecular weight with monomer conversion and narrow molecular weight distributions for the resultant PMMA. ¹H NMR spectra and chain‐extension experiments further confirm the “living” characteristics of this process. A plausible mechanism is discussed.

     

A Preparation Method for Well‐Defined Crystallites of Mgcl2‐Supported Ziegler‐Natta Catalysts and their Observation by AFM and SEM

A method for the preparation of well‐defined crystallites of MgCl₂‐supported Ziegler‐Natta catalysts on Si wafers has been developed. This has been achieved by the spin‐coating of a MgCl₂ solution onto a flat Si wafer, followed by controlled crystal growth to give well‐defined MgCl₂ · nEtOH crystallites. The growth of the crystallites on the flat silica facilitates their characterization using electron and scanning probe microscopy. The relative proportions of 120° and 90° edge angles indicate the preference for the formation of a particular crystallite face for the MgCl₂. Polyethylene has been identified to be formed on the lateral faces of the crystallite.

     

Synthesis and phase behavior of a polynorbornene‐based molecular brush with dual “jacketing” effects

In this study, a series of well‐defined liquid crystalline molecular brushes with dual “jacketing” effects, polynorbornene‐g‐poly{2,5‐bis[(4‐methoxyhenyl)oxycarbonyl] styrene} (PNb‐g‐PMPCS), were synthesized by the “grafting through” method from ring opening metathesis polymerization of α‐norbornenyl‐terminated PMPCS. The rigid PMPCS side chain was synthesized by Cu(I)‐catalyzed atom transfer radical polymerization initiated by N‐[(2‐bromo‐2‐methylpropanoyl)ethyl]‐cis‐5‐norbornene‐exo‐2,3‐dicarboximide. The chemical structures of the molecular brushes were confirmed by ¹H NMR and gel permeation chromatography (GPC), and the thermal properties were studied by thermogravimetric analysis (TGA). GPC results reveal that the molecular brushes have relatively narrow polydispersities. TGA results show that the molecular brushes have excellent thermal stabilities. The PMPCS side chains in all the molecular brushes form the columnar nematic liquid crystalline phase, which is a little different from the behavior of linear PMPCS possibly due to the confinement or other effects of the brush architecture which leads to decreased order. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2116–2123     

Synthesis of inverse star block copolymer by combination of ATRP,ring opening polymerization,and “click chemistry”

The inverse star block copolymer, (poly(ε‐caprolactone)‐b‐polystyrene)₂‐core‐(poly(ε‐caprolactone)‐b‐polystyrene)₂, [(PCL‐PS)₂‐core‐(PCL‐PS)₂] has been successfully prepared by combination of atom transfer radical polymerization (ATRP), ring opening polymerization (ROP), and “Click Chemistry.” The synthesis includes the following five steps: (1) synthesis of a heterofunctional initiator with two ATRP initiating groups and two hydroxyl groups; (2) formation of (Br‐PS)₂‐core‐(OH)₂ via ATRP of styrene; (3) preparation of the (PCL‐PS)₂‐core‐(OH)₂ through “click” reaction of the α‐propargyl, ω‐acetyl terminated PCL with (N₃‐PS)₂‐core‐(OH)₂ which was prepared by transformation of the terminal bromine groups in (Br‐PS)₂‐core‐(OH)₂ into azide groups; (4) the ROP of CL using (PCL‐PS)₂‐core‐(OH)₂ as macroinitiator to form (PCL‐PS)₂‐core‐(PCL‐OH)₂; and (5) preparation of the (PCL‐PS)₂‐core‐(PCL‐PS)₂ through the ATRP of styrene using (PCL‐PS)₂‐core‐(PCL‐Br)₂ as macroinitiator which was prepared by reaction of the terminal hydroxyl groups at the end of the PCL chains with 2‐bromoisobutyryl bromide. The characterization data support structures of the inverse star block copolymer and the intermediates. The differential scanning calorimeter results and polarized optical microscope observation showed that the intricate structure of the inverse star block copolymer greatly restricted the movement of the PS segments and PCL segments, resulted in the increase of the glass transition temperature of PS segments and the decrease of crystallization ability of PCL segments. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7757–7772, 2008     

Azide/Alkyne‐“Click”‐Reactions of Encapsulated Reagents: Toward Self‐Healing Materials

The successful encapsulation of reactive components for the azide/alkyne‐“click”‐reaction is reported featuring for the first time the use of a liquid polymer as reactive component. A liquid, azido‐telechelic three‐arm star poly(isobutylene) ( = 3900 g · mol⁻¹) as well as trivalent alkynes were encapsulated into micron‐sized capsules and embedded into a polymer‐matrix (high‐molecular weight poly(isobutylene), = 250 000 g · mol⁻¹). Using (Cu^IBr(PPh₃)₃) as catalyst for the azide/alkyne‐“click”‐reaction, crosslinking of the two components at 40 °C is observed within 380 min and as fast as 10 min at 80 °C. Significant recovery of the tensile storage modulus was observed in a material containing 10 wt.‐% and accordingly 5 wt.‐% capsules including the reactive components within 5 d at room temperature, thus proving a new concept for materials with self‐healing properties.

     

Investigation of the Effect of Thermal Annealing on Poly(3‐hexylthiophene) Nanofibers by Scanning Probe Microscopy: From Single‐Chain Conformation and Assembly Behavior to the Interfacial Interactions with Graphene Oxide

Poly(3‐hexylthiophene) (P3HT) has been widely used in devices owing to its excellent properties and structural features. However, devices based on pure P3HT have not exhibited high performance. Strategies, such as thermal annealing and surface doping, have been used to improve the electrical properties of P3HT. In this work, different from previous studies, the effect of thermal annealing on P3HT nanofibers are examined, ranging from the single polymer chain conformation to chain packing, and the interfacial interactions with graphene oxide (GO) at nanoscale dimensions, by using scanning tunneling microscopy (STM), atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM). High‐resolution STM images directly show the conformational changes of single polymer chains after thermal annealing. The morphology of P3HT nanofibers and the surface potential changes of the P3HT nanofibers and GO is further investigated by AFM and KPFM at the nanoscale, which demonstrate that the surface potentials of P3HT decrease, whereas that of GO increases after thermal annealing. All of the results demonstrate the stronger interfacial interactions between P3HT and GO occur after thermal treatments due to the changes in P3HT chain conformation and packing order.     

Synthesis of a “molecular rope curtain”: Preparation and characterization of a sliding graft copolymer with grafted poly(ethylene glycol) side chains by the “grafting onto” strategy

A sliding graft copolymer (SGC) with poly(ethylene glycol) (PEG) side chains was prepared by ester formation between terminal carboxyl groups of oxidized PEG methyl ether with molecular weight of 2000 (mPEG2000‐COOH) and hydroxyl groups of a polyrotaxane consisting of PEG and cyclodextrins (CDs). Formation of the SGC structure was confirmed by ¹H NMR, attenuated total reflectance Fourier‐transformed infrared, and gel permeation chromatography. The SGC was soluble in good solvents of PEG and insoluble in poor solvents of PEG. Estimation of the number of grafted mPEG chains suggested a “rope‐curtain” like structure, in which an mPEG chain is connected to each CD ring. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A new strategy for synthesis of “umbrella‐like” poly(ethylene glycol) with monofunctional end group for bioconjugation

A novel strategy was used to synthesize poly(ethylene glycol) (PEG) with “umbrella‐like” structure containing a single reactive group at the “handle” of the “umbrella”. 1‐(Bis(2‐hydroxyethyl)amino)‐3‐(1‐ethoxyethoxy)propan‐2‐ol was used to initiate the ring‐opening polymerization (ROP) of ethylene oxide (EO) in the presence of diphenylmethylpotassium (DPMK) to obtain three‐arm PEG (PEG3), then terminated by benzyl bromide or ethyl bromide. The resultant PEG3 was hydrolyzed to generate hydroxyl group at the conjunction point, and the second step ROP of EO was carried out using PEG3‐OH as macroinitiator in the presence of DPMK. The obtained four‐arm PEG (PEG4) contained a functional hydroxyl group at the end of the fourth arm, which could be easily modified to bioactive groups such as carboxyl, active ester, amino, etc. The well‐defined structure of “umbrella‐like” PEG was characterized by GPC, ¹H NMR, and MALDI‐TOF MS in detail. Propionic acid succinimidyl ester of PEG4 (10 kDa) was utilized for protein conjugation with interferon α‐2b. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of a novel graft copolymer with hyperbranched poly(glycerol) as core and “Y”‐shaped polystyrene‐b‐poly(ethylene oxide)2 as side chains

The graft copolymers composed of “Y”‐shaped polystyrene‐b‐poly(ethylene oxide)₂ (PS‐b‐PEO₂) as side chains and hyperbranched poly(glycerol) (HPG) as core were synthesized by a combination of “click” chemistry and atom transfer radical polymerization (ATRP) via “graft from” and “graft onto” strategies. Firstly, macroinitiators HPG‐Br were obtained by esterification of hydroxyl groups on HPG with bromoisobutyryl bromide, and then by “graft from” strategy, graft copolymers HPG‐g‐(PS‐Br) were synthesized by ATRP of St and further HPG‐g‐(PS‐N₃) were prepared by azidation with NaN₃. Then, the precursors (Bz‐PEO)₂‐alkyne with a single alkyne group at the junction point and an inert benzyl group at each end was synthesized by sequentially ring‐opening polymerization (ROP) of EO using 3‐[(1‐ethoxyethyl)‐ethoxyethyl]‐1,2‐propanediol (EEPD) and diphenylmethylpotassium (DPMK) as coinitiator, termination of living polymeric species by benzyl bromide, recovery of protected hydroxyl groups by HCl and modification by propargyl bromide. Finally, the “click” chemistry was conducted between HPG‐g‐(PS‐N₃) and (Bz‐PEO)₂‐alkyne in the presence of N,N,N′,N″,N”‐pentamethyl diethylenetriamine (PMDETA)/CuBr system by “graft onto” strategy, and the graft copolymers were characterized by SEC, ¹H NMR and FTIR in details. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Preparation of linear and hyperbranched fluorinated poly(aryl ether‐thioether) through para‐fluoro‐thiol click reaction

The para‐fluoro‐thiol “click” reaction (PFTCR) was utilized to prepare linear and hyperbranched fluorinated poly (aryl ether‐thioether). For this purpose, 1,2‐bis(perfluorophenoxy)ethane was prepared and reacted with 1,6‐hexandithiol and trimethylolpropane tris(3‐mercaptopropionate), respectively. While hyperbranched polymers were prepared using 0.5 M concentrations of starting materials at room temperature, the linear polymer syntheses were performed at different reaction temperatures and concentrations. The resulting polymers were mainly characterized by NMR measurements and a very distinct fluorine signals regarding meta‐ and ortho‐ positions in the ¹⁹F NMR were found for both polymer topologies. In addition to NMR analyses, both linear and hyperbranched polymers were further characterized by using Fourier transform infrared spectroscopy (FT‐IR), gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1853–1859     

Synthesis and characterization of resorcinarene‐centered amphiphilic A8B4 miktoarm star copolymers based on poly(ε‐caprolactone) and poly(ethylene glycol) by combination of CROP and “click” chemistry

Well‐defined amphiphilic A₈B₄ miktoarm star copolymers with eight poly(ethylene glycol) chains and four poly(ε‐caprolactone) arms (R‐8PEG‐4PCL) were prepared using “click” reaction strategy and controlled ring‐opening polymerization (CROP). First, multi‐functional precursor (R‐8N₃‐4OH) with eight azides and four hydroxyls was synthesized based on the derivatization of resorcinarene. Then eight‐PEG‐arm star polymer (R‐8PEG‐4OH) was prepared through “click” reaction of R‐8N₃‐4OH with pre‐synthesized alkyne‐terminated monomethyl PEG (mPEG‐A) in the presence of CuBr/N,N,N′,N″,N″′‐ pentamethyldiethylenetriamine (PMDETA) in DMF. Finally, R‐8PEG‐4OH was used as tetrafunctional macroinitiator to prepare resorcinarene‐centered A₈B₄ miktoarm star copolymers via CROP of ε‐caprolactone utilizing Sn(Oct)₂ as catalyst at 100 °C. These miktoarm star copolymers could self‐assemble into spherical micelles in aqueous solution with resorcinarene moieties on the hydrophobic/hydrophilic interface, and the particle sizes could be controlled by the ratio of PCL to PEG. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2824–2833.     

Synthesis of poly(isobornyl acrylate) containing copolymers by atom transfer radical polymerization

For the first time, a detailed study of the atom transfer radical polymerization of isobornyl acrylate (iBA) is reported. On the basis of these results, well‐defined PiBA‐containing block copolymers were synthesized, focussing on the preparation of amphiphilic poly(acrylic acid) (PAA) containing block copolymers. The precursor monomers 1‐ethoxyethyl acrylate (EEA) as well as tert‐butyl acrylate have been used to synthesize the PAA‐segments of the PiBA‐b‐PAA block copolymers. Finally, the synthesis of “block‐like” copolymers of PiBA and PEEA via a one‐pot procedure was investigated. By optimizing the copper and ligand concentration, and choosing the appropriate solvent, a controlled polymerization behaviour was obtained in all cases, as evidenced by a detailed kinetic analysis, GPC, NMR, and MALDI‐TOF data. Thermogravimetric analysis confirmed the quantitative transformation of the precursor polymer PEEA to the corresponding PAA‐containing copolymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1649–1661, 2008     

Synthesis and characterization of novel resorcinarene‐centered amphiphilic star‐block copolymers consisting of eight ABA triblock arms by combination of ROP,ATRP, and click chemistry

Novel amphiphilic eight‐arm star triblock copolymers, star poly(ε‐caprolactone)‐block‐poly(acrylic acid)‐block‐poly(ε‐caprolactone)s (SPCL‐PAA‐PCL) with resorcinarene as core moiety were prepared by combination of ROP, ATRP, and “click” reaction strategy. First, the hydroxyl end groups of the predefined eight‐arm SPCLs synthesized by ROP were converted to 2‐bromoesters which permitted ATRP of tert‐butyl acrylate (tBA) to form star diblock copolymers: SPCL‐PtBA. Next, the bromide end groups of SPCL‐PtBA were quantitatively converted to terminal azides by NaN₃, which were combined with presynthesized alkyne‐terminated poly(ε‐caprolactone) (A‐PCL) in the presence of Cu(I)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine in DMF to give the star triblock copolymers: SPCL‐PtBA‐PCL. ¹H NMR, FTIR, and SEC analyses confirmed the expected star triblock architecture. The hydrolysis of tert‐butyl ester groups of the poly(tert‐butyl acrylate) blocks gave the amphiphilic star triblock copolymers: SPCL‐PAA‐PCL. These amphiphilic star triblock copolymers could self‐assemble into spherical micelles in aqueous solution with the particle size ranging from 20 to 60 nm. Their micellization behaviors were characterized by dynamic light scattering and transmission electron microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2905–2916, 2009     

Synthesis,characterization, and micellization of PCL‐g‐PEG copolymers by combination of ROP and “Click” chemistry via “Graft onto” method

Biodegradable and biocompatible PCL‐g‐PEG amphiphilic graft copolymers were prepared by combination of ROP and “click” chemistry via “graft onto” method under mild conditions. First, chloro‐functionalized poly(ε‐caprolactone) (PCL‐Cl) was synthesized by the ring‐opening copolymerization of ε‐caprolactone (CL) and α‐chloro‐ε‐caprolactone (CCL) employing scandium triflate as high‐efficient catalyst with near 100% monomer conversion. Second, the chloro groups of PCL‐Cl were quantitatively converted into azide form by NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction was carried out between azide‐functionalized PCL (PCL‐N₃) and alkyne‐terminated poly(ethylene glycol) (A‐PEG) to give PCL‐g‐PEG amphiphilic graft copolymers. The composition and the graft architecture of the copolymers were characterized by ¹H NMR, FTIR, and GPC analyses. These amphiphilic graft copolymers could self‐assemble into sphere‐like aggregates in aqueous solution with diverse diameters, which decreased with the increasing of grafting density. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation of poly(N‐ethyl methacrylamide) particles via an emulsion/precipitation process: The role of the crosslinker

Monodisperse, thermosensitive poly(N‐ethyl methacrylamide) microgel particles were prepared by the batch precipitation/emulsion polymerization of water‐soluble N‐ethyl methacrylamide and the hydrophobic crosslinker ethylene glycol dimethacrylate initiated by potassium persulfate. Particular attention was paid to the effect of the crosslinker agent on the polymerization process (kinetics, conversion, and water‐soluble oligomer content). Particles were characterized in terms of their size distribution and swelling capacity. A polymerization mechanism for the water‐soluble monomer and non‐water‐soluble crosslinker is proposed and discussed on the basis of a combination of both emulsion and precipitation polymerization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1808–1817, 2002     

Calixarene‐centered amphiphilic A2B2 miktoarm star copolymers based on poly(ε‐caprolactone) and poly(ethylene glycol): Synthesis and self‐assembly behaviors in water

Novel calixarene‐centered amphiphilic A₂B₂ miktoarm star copolymers composed of two PCL arms and two PEG arms with calix[4]arene as core moiety were synthesized by the combination of CROP and “click” chemistry. First, a heterotetrafunctional calix[4]arene derivative with two hydroxyl groups and two alkyne groups was designed as a macroinitiator to prepare calixarene‐centered PCL homopolymers (C4‐PCL) by CROP in the presence of Sn(Oct)₂ as catalyst at 110 °C. Next, azide‐terminated PEG (A‐PEG) was synthesized by tandem treating methoxy poly(ethylene glycol)s (mPEG) with 4‐chlorobutyryl chloride and NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction between C4‐PCL and A‐PEG led to A₂B₂ miktoarm star copolymer [C4S(PCL)₂‐(PEG)₂]. ¹H NMR, FT‐IR, and SEC analyses confirmed the well‐defined miktoarm star architecture. These amphiphilic miktoarm star copolymers could self‐assemble into multimorphological aggregates in water. The calix[4]arene moieties with a cavity <1 nm on the hydrophilic/hydrophobic interface of these aggregates may provide potential opportunities to entrap guest molecules for special applications in supermolecular science. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Efficient synthesis of well‐defined amphiphilic cylindrical brushes polymer with high grafting density: Interfacial “Click” chemistry approach

Reported here is a novel approach toward efficient preparation of well‐defined cylindrical brushes polymer (CBPs) with both hydrophobic and hydrophilic side chains connected to the linear backbone by interfacial “click” chemistry in two immiscible solvents. The CBPs with high grafting density of more than 95% and molecular polydispersity (M_w/M_n) less than 1.12 can be readily synthesized using present approach. On contrary, the CBPs synthesized from the “click” reaction in a single solvent in homogenous state have low grafting density of less than 55% and molecular polydispersity (M_w/M_n) more than 1.78. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011