“Click polyester”: Synthesis of polyesters containing triazole units in the main chain via safe and rapid “click” chemistry and their properties

Click Cu(I)‐catalyzed polymerizations of diynes that contained ester linkages and diazides were performed to produce polyesters (click polyesters) of large molecular weights [(～1.0–7.0 ) × 10⁴], that contained main‐chain 1,4‐disubstitued triazoles in excellent yields. Incorporation of triazole improved the thermal properties and magnified the even‐odd effect of the methylene chain length. We also found that, by changing the positions of the triazole rings, the thermal properties of the polyesters could be controlled. The use of in situ azidation was a safe reaction, as explosive diazides are not used. In addition, the microwave heating was found to accelerate the polymerization rates. This is the first study that has applied click chemistry for the synthesis of a series of polyesters. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4207–4218, 2010     

Thermally Crosslinkable and Chemically Modifiable Aromatic Polyesters Possessing Pendant Propargyloxy Groups

New aromatic (co)polyesters containing pendant propargyloxy groups were synthesized by phase transfer‐catalyzed interfacial polycondensation of 5‐(propargyloxy)isophthaloyl chloride (P‐IPC) and various compositions of P‐IPC and isophthaloyl chloride with bisphenol A. FTIR and NMR spectroscopic data, respectively, revealed successful incorporation of pendant propargyloxy groups into (co)polyesters and formation of (co)polyesters with desired compositions. (Co)polyesters exhibited good solubility in common organic solvents such as chloroform, dichloromethane, and tetrahydrofuran and could be cast into transparent, flexible, and tough films from chloroform solution. Inherent viscosities and number average molecular weights of (co)polyesters were in the range 0.77–1.33 dL/g and 43,600–118,000 g/mol, respectively, indicating the achievement of reasonably high‐molecular weights. The 10% weight loss temperatures of (co)polyesters were in the range 390–420 °C, demonstrating their good thermal stability. (Co)polyesters exhibited T_g in the range 146–170 °C and T_g values decreased with increase in mol % incorporation of P‐IPC. The study of non‐isothermal curing by DSC indicated thermal crosslinking of (co)polyesters via propargyloxy groups. The utility of pendant propargyloxy group was demonstrated by post‐modification of the selected copolyester with 1‐(4‐azidobutyl)pyrene, 9‐(azidomethyl)anthracene, and azido‐terminated poly(ethyleneglycol) monomethyl ether via copper(I)‐catalyzed Huisgen 1,3‐dipolar cycloaddition reaction. FTIR and ¹H NMR spectra confirmed that click reaction was quantitative. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 588–597     

PEGylated Click Polypeptides Synthesized by Copper‐Free Microwave‐Assisted Thermal Click Polymerization for Selective Endotoxin Removal from Protein Solutions

PEGylated click polypeptides ( PEG‐CP s) containing α‐amino side groups as well as PEG segments are designed for selective endotoxin removal from protein solutions. The PEG‐CP s are synthesized via copper‐free thermal click copolymerization from aspartic (or glutamic) acid‐based dialkyne and diazide monomers (containing free amino side groups) and alkyne‐terminated mPEGs or dialkyne‐terminated PEGs. Microwave‐assisting technology is introduced into thermal click chemistry to improve the reaction efficiency. The monomers and polymers are fully characterized using NMR, XPS, and MALDI‐TOF MS. After immobilizing the PEGylated click polypeptides onto polystyrene microspheres, the adsorbents exhibit good endotoxin removal selectivity from BSA solutions.

     

一种具备巯基点击化学功能的二硫代酯RAFT链转移剂的合成

以2,2-二硫二吡啶,2-巯基乙醇为原料,醋酸为催化剂,合成了2-羟乙基-二硫吡啶(PⅠ)。以PⅠ、4-氰基-4-(硫代苯甲酰)戊酸(PⅡ)为原料,1-(3-二甲氨基丙基)-3-乙基碳二亚胺盐酸盐(EDC)、4-二甲氨基吡啶(DMAP)为催化剂,合成了一种新的可逆加成-断裂链转移自由基聚合(RAFT)链转移剂4-氰基-4-(硫代苯甲酰)戊酸-2-二硫吡啶乙酯(PⅢ)。以PⅢ为RAFT链转移剂,偶氮二异丁腈(AIBN)为引发剂,甲基丙烯酸甲酯(MMA)为单体,采用RAFT制备了聚甲基丙烯酸甲酯(PMMA)。用1 H-NMR分析了链转移剂的的分子结构,用GPC测得PMMA聚合物的分子量及其分布。结果表明:能用于巯基点击化学的二硫吡啶基团被接到PⅡ的末端,成功制备了一种具备巯基点击化学功能的二硫代酯RAFT链转移剂(PⅢ),利用PⅢ,通过RAFT聚合制备了分子量分布狭窄的PMMA聚合物。     

ATRP和点击化学结合法制备PDMAAm—PDMS—PDMAAm嵌段聚合物

采用原子转移自由基聚合（ATRP）法制得了端基分别为烯丙基和溴原子的聚二甲基丙烯酰胺（PDMAAm）,经叠氮基亲核取代后与端炔基聚二甲基硅氧烷进行点击反应,得到两亲三嵌段聚合物。利用^1HNMR、FTIR、GPC等测试方法对聚合物的结构进行了表征。结果表明：采用ATRP法合成的PDMAAm均聚物分子量分布较窄,通过点击化学法将热力学不相容的亲水性PDMAAm链段及疏水性聚二甲基硅氧烷（PDMS）链段制备PDMAAmPDMS—PDMAAm嵌段聚合物,是一种高效易行的方法。     

Control of Regioselectivity over Gold Nanocrystals of Different Surfaces for the Synthesis of 1,4‐Disubstituted Triazole through the Click Reaction

Gold nanocubes, octahedra, and rhombic dodecahedra were examined for facet‐dependent catalytic activity in the formation of triazoles. Rhombic dodecahedra gave 100 % regioselective 1,4‐triazoles. The product yield was increased by decreasing the particle size. However, a mixture of 1,4‐ and 1,5‐triazoles was obtained in lower yields when cubes and octahedra of similar sizes were used. The lowest Au‐atom density on the {110} surface and largest unsaturated coordination number of surface Au atoms may explain their best catalytic efficiency and product regioselectivity. Various spectroscopic techniques were employed to verify the formation of the Au–acetylide intermediate and establish the reaction mechanism, in which phenylacetylene binds to the Au {110} surface through the terminal‐binding mode to result in the exclusive formation of 1,4‐triazoles. The smallest rhombic dodecahedra can give diverse 1,4‐disubstituted triazoles in good yields by coupling a wide variety of alkynes and organic halides.     

Synthesis,characterization, and properties of new thermally curable polyetheresters containing benzoxazine moieties in the main chain

High molecular weight polyetheresters (PEE) containing thermally curable benzoxazine units in the main chain have been synthesized. For this purpose, first the diol functional monomer is synthesized through the Mannich reaction of 4,4′‐isopropylidenediphenol (bisphenol A), formaldehyde, and 2‐(2‐aminoethoxy)ethanol. Polycondensation of the resulting benzoxazine dietherdiol with adipoyl chloride and terephthaloyl dichloride in the presence of triethyl amine yields the corresponding PEE with the molecular weights of 34.000 Da. The structures of the precursor diol monomer and the resulting PEEs are confirmed by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy (¹H‐NMR) analysis. Curing behavior of both the monomer and polymers has also been studied by differential scanning calorimetry (DSC). Flexible free standing transparent films of the PEEs are obtained by solvent casting from dichloromethane solution on Teflon plates. The films preserve shape and, to some extent, toughness after thermal curing between 140 and 220 °C. Thermal properties of the cured polymers are also investigated by thermogravimetric analysis (TGA). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 414–420, 2008     

Synthesis and Characterization of Some Novel Glycodendrimers and N-alkyldendrimers with Amide Core and Triazole Functionality through Click Chemistry

The syntheses of various types of 1,2,3-triazole-based dendrimers 1–4 with sugar pyranosylazides and N-ethyl and N-heptylazides as a surface unit and benzene-1,3,5-tricorboxlyic amide as core unit through click chemistry approach are described.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Synthesis of Hydrophobic Polymer Brushes on Silica Nanoparticles Via the Combination of Surface-Initiated ATRP,ROP and Click Chemistry

A fascinating nanoobject, hydrophobic polymer brushes with a hard core of silica nanoparticles and a relatively soft shell of polystyrene-block-poly(? -caprolactone) (PS-b-PCL), was easily constructed by surface-initiated atom transfer radical polymerization (ATRP) of styrene, ring-opening polymerization (ROP) of ?-caprolactone and click reaction. The structure and morphology of the as-prepared hybrid nanomaterials were characterized and confirmed by FTIR, ¹H-NMR, TGA and TEM. We believe that the breakthrough associated with formation of such a complex nanoobject would open a door for the fabrication of novel functional nanomaterials or nanodevices with designable structure and tailor-made properties.     

A Versatile Strategy to Synthesize Perfluoropolyether‐Based Thermoplastic Fluoropolymers by Alkyne‐Azide Step‐Growth Polymerization

Perfluoropolyether (PFPE)‐based thermoplastic fluoropolymers are synthesized by A₂ + B₂ step‐growth polymerization between PFPE‐diyne and fluorinated diazides. This versatile method allows synthesizing PFPE‐based materials with tunable physicochemical properties depending on the exact nature of the fluorinated segment of the diazide precursor. Semicrystalline or amorphous materials endowed with high thermostability (≈300 °C under air) and low glass transition temperature (≈−100 °C) are obtained, as confirmed by differential scanning calorimetry, thermogravimetry, and rheometry. Step‐growth polymerizations can be copper‐catalyzed but also thermally activated in some cases, thus avoiding the presence of copper residues in the final materials. This strategy opens up new opportunities to easily access PFPE‐based materials on an industrial scale. Furthermore, a plethora of developments can be envisioned (e.g., by adding a third trifunctional component to the formulations for the synthesis of PFPE‐based elastomers).

     

Rapid Synthesis of Block and Cyclic Copolymers via Click Chemistry in the Presence of Copper Nanoparticles

A new method for the rapid and efficient coupling of homopolymers to yield di- and triblock copolymers as well as cyclic polymers using the 3 + 2 π Huisgen copper catalyzed cyclo-addition reaction has been developed. This facile method utilizes commercially available Cu nanoparticles that are tolerant to O(2), easily removable and recyclable.     

Combining “click” chemistry and step‐growth polymerization for the generation of highly functionalized polyesters

Aliphatic polyesters bearing pendant alkyne groups were successfully prepared by step‐growth polymerization of different building blocks such as adipic acid and succinic acid in combination with an acetylene‐based diol, 2‐methyl‐2‐propargyl‐1,3‐propanediol, besides 1,4‐butanediol and ethylene glycol. It was demonstrated that the alkyne groups survive the high reaction temperatures (200 °C) in the presence of a radical inhibitor. The alkyne loading has been tuned by the ratio of the different monomers used, up to 25 mol % of alkyne groups. Subsequently, the alkyne groups have been reacted with azides by the copper‐catalyzed Huisgen 1,3‐dipolar cycloaddition reaction, a popular type of “click” chemistry. “Click” reactions have been performed quantitatively in the presence of benzyl azide and azide‐terminated poly(ethylene glycol), yielding brush copolymers in the latter case. Kinetic investigations about this click reaction have been performed by means of on‐line Fourier transform mid‐infrared spectroscopy, which was reported for the first time in the field of the click chemistry research. A whole range of functionalized polyesters, based on poly(ethylene succinate) and poly(butylene adipate), is available, the properties of which can be tailored by choosing the appropriate azide compound. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6552–6564, 2008     

Synthesis and gas barrier characterization of poly(ethylene isophthalate)

Poly(ethylene isophthalate) (PEI) was synthesized for this research with essentially a condensation polymerization of isophthalic acid and ethylene glycol catalyzed by zinc acetate and antimony trioxide. Several samples were obtained, and their characteristics were observed and compared with poly(ethylene terephthalate) (PET). The synthesized PEI samples were chemically identified by ¹H NMR. Thermal analysis with differential scanning calorimetry (DSC) yielded results that indicate the samples were primarily amorphous, with a glass‐transition temperature of 55–60 °C. Molecular weights of these PEI samples were also obtained through intrinsic viscosity measurements (Mark–Houwink equation). Molecular weights varied with conditions of the polymerization, and the highest molecular weight achieved was 21,000 g/mol. Finally, the diffusion coefficient, solubility, and permeability of CO₂ gas in PEI were measured and found to be substantially lower than in PET, as anticipated from their isomeric chemical structures. This is because in PET the phenyl rings are substituted in the para (1,4) positions, which allows for their facile flipping, effectively permitting gases to pass through. However, the meta‐substituted phenyl rings in PEI do not permit such ring flipping, and thus PEI may be more suitable for barrier applications. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4247–4254, 2004     

Interfacing Click Chemistry with Automated Oligonucleotide Synthesis for the Preparation of Fluorescent DNA Probes Containing Internal Xanthene and Cyanine Dyes

Double‐labeled oligonucleotide probes containing fluorophores interacting by energy‐transfer mechanisms are essential for modern bioanalysis, molecular diagnostics, and in vivo imaging techniques. Although bright xanthene and cyanine dyes are gaining increased prominence within these fields, little attention has thus far been paid to probes containing these dyes internally attached, a fact which is mainly due to the quite challenging synthesis of such oligonucleotide probes. Herein, by using 2′‐O‐propargyl uridine phosphoramidite and a series of xanthenes and cyanine azide derivatives, we have for the first time performed solid‐phase copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) click labeling during the automated phosphoramidite oligonucleotide synthesis followed by postsynthetic click reactions in solution. We demonstrate that our novel strategy is rapid and efficient for the preparation of novel oligonucleotide probes containing internally positioned xanthene and cyanine dye pairs and thus represents a significant step forward for the preparation of advanced fluorescent oligonucleotide probes. Furthermore, we demonstrate that the novel xanthene and cyanine labeled probes display unusual and very promising photophysical properties resulting from energy‐transfer interactions between the fluorophores controlled by nucleic acid assembly. Potential benefits of using these novel fluorescent probes within, for example, molecular diagnostics and fluorescence microscopy include: Considerable Stokes shifts (40–110 nm), quenched fluorescence of single‐stranded probes accompanied by up to 7.7‐fold light‐up effect of emission upon target DNA/RNA binding, remarkable sensitivity to single‐nucleotide mismatches, generally high fluorescence brightness values (FB up to 26), and hence low limit of target detection values (LOD down to <5 nM ).     

The First Example of Main‐Chain Cyclic Azobenzene Polymers

A novel main‐chain azobenzene cyclic polymer, cyclic‐PEHPA, has been successfully synthesized by ‘click’ cyclization of the α‐alkyne‐ω‐azido hetero‐difunctional linear precursors (linear‐PEHPA), which is synthesized by a step‐growth polymerization of the 3′‐ethynylphenyl[4‐hexyl‐(2‐azido‐2‐methyl‐ propionate) phenyl] azobenzene (EHPA). Gel permeation chromatography, and ¹H NMR and FT‐IR spectra confirmed the complete transformation of linear‐PEHPA into cyclic‐PEHPA. With the same molecular weights, the cyclic‐PEHPAs are found to have higher glass transition temperatures than the linear‐PEHPAs, but almost the same decomposition temperatures. In addition, the obtained cyclic azobenzene polymer with lower molar mass shows a slightly better trans–cis–trans photoisomerization ability than the corresponding linear‐PEHPA.

     

Poly(butylene terephthalate‐co‐5‐tert‐butyl isophthalate) copolyesters: Synthesis,characterization, and properties

A series of poly(butylene terephthalate) copolyesters containing 5‐tert‐butyl isophthalate units up to 50 mol %, as well as the homopolyester entirely made of these units, were prepared by polycondensation from a melt. The microstructure of the copolymers was determined by NMR to be random for the whole range of compositions. The effect exerted by the 5‐tert‐butyl isophthalate units on thermal, tensile, and gas transport properties was evaluated. Both the melting temperature (T_m) and crystallinity were found to decrease steadily with copolymerization, whereas the glass‐transition temperature (T_g) increased and the polyesters became more brittle. Permeability and solubility slightly increased with the content in substituted isophthalic units, whereas the diffusion coefficient remained practically constant. For the homopolyester poly(5‐tert‐butyl isophthalate), all these properties were found to deviate significantly from the general trend displayed by copolyesters, suggesting that a different structure in the solid state is likely adopted in this case. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 92–100, 2005     

Synthesis of the Novel Chiral Catalysts by Click Chemistry and Their Application

Novel cinchonine ammonium salt derivatives have been prepared by 1,3‐dipolar cycloaddition. Their chiral catalytic efficacy was investigated in the asymmetric alkylation of N‐diphenylmethyleneglycine t‐butyl ester in the water phase. As the special structure of the catalyst, its asymmetric alkylation catalytic behavior both in organic solvents and in water is satisfactory, which is environmentally friendly.     

Synthesis of Well‐Defined Figure‐of‐Eight‐Shaped Polymers by a Combination of ATRP and Click Chemistry

Well‐defined figure‐of‐eight‐shaped (8‐shaped) polystyrene (PS) with controlled molecular weight and narrow polydispersities has been prepared by the combination of atom transfer radical polymerization (ATRP) and click chemistry. The synthesis involves two steps: 1) Preparation of a linear tetrafunctional PS with two azido groups, one at each end of the polymer chain, and two acetylene groups at the middle of the chain. 2) Intramolecular cyclization of the linear tetrafunctional PS at a very low concentration by a click reaction to produce the 8‐shaped polystyrenes. The resulting intermediates and the target polymers were characterized by ¹H NMR and FT‐IR spectroscopy, and gel permeation chromatography. The glass transition temperatures (T_gs) were determined by differential scanning calorimetry and it was found that the decrease in chain mobility by cyclization resulted in higher T_gs for 8‐shaped polystyrenes as compared to their corresponding precursors.