Rose‐Like Microstructures of Polyaniline by Using a Simplified Template‐Free Method under a High Relative Humidity

3‐D rose‐like microstructures of polyaniline (PANI), which are self‐assembled from 2‐D nanosheets consisted of 1‐D nanofibers, were synthesized by a template‐free method in the presence of ammonium peroxydisulfate (APS) as both oxidant and dopant under a high relative humidity of 80% for the first time. When the relative humidity increases from 25 to 80%, not only morphology of the micro/nanostructured PANI undergoes a change from 1‐D nanofibers to 2‐D nanosheets to 3‐D rose‐like microstructures, but also increase in crystallinity. It is proposed that a cooperation effect of the oriented water molecules at the vapor–water interface and difference in hydrogen bonding energies between the interface and the bulk induced by the relative high humidity results in the formation of the 3‐D rose‐like microstructures self‐assembled from 2‐D nanosheets. Moreover, the method reported may provide a simple approach for understanding self‐assembly of complex micro/nanostructures of PANI.

     

Facile Synthesis of Self‐Assembled Polyaniline Nanodisks

Polyaniline nanodisks have been synthesized successfully by the chemical oxidation polymerization of aniline by a self‐assembly process without the use of any acid. The thickness and lateral dimensions of the polyaniline nanodisks are in the range of 20–30 nm and 1–2 µm, respectively. The influence of synthetic parameters, such as the concentration of ammonium peroxydisulfate and pH, on the morphologies of polyaniline nanostructures have been investigated.

     

A Novel Strategy for the Synthesis of Sheet‐Like Polyaniline

Polyaniline (PANI) micro/nanosheets are successfully synthesized by a template‐free method without using any conventional oxidants. Scanning electron microscopy, transmission electron microscopy, and FT‐IR spectroscopy are applied to characterize the products. By investigating the morphologies and chemical structures of the PANI micro/nanosheets, a possible formation mechanism is proposed. In addition, the influences of experimental parameters, such as the kind of dopant, concentration of aniline, and acidity of reaction system, on the morphologies of the PANI micro/nanosheets have been systematically investigated.

     

Electrical Conductivity of an Individual Polyaniline Nanotube Synthesized by a Self‐Assembly Method

Camphor sulfonic acid (CSA) doped polyaniline (PANI) nanotubes (175 nm in outer diameter and 120 nm in inner diameter) were synthesized successfully by a self‐assembly method. It is found that the room‐temperature conductivity of an individual PANI nanotube is 30.5 S · cm⁻¹; in particular, the intrinsic resistance of an individual nanotube (30 kΩ) is much smaller than the contact resistance of crossed nanotubes (500 kΩ).

A SEM image of two crossed PANI‐CSA nanotubes and the attached Pt electrodes.     

Self‐Assembled Single‐Crystal Polyaniline Microplates and Their Anisotropic Electrical Transport Property

Self‐assembly of two‐dimensional (2D) structures from functional molecules is of great scientific importance. Herein, using a typical linear conducting polymer, polyaniline as building blocks, 2D single crystalline microplates are successively produced. The structure of 2D microplates is clearly defined by selected area electron diffraction, X‐ray diffraction, and Raman spectroscopy. Owing to the anisotropic arrangement of linear conjugated PANI molecules, the microplate shows a typical anisotropic electrical transport property.

     

Polyaniline Fan‐Like Architectures of Rectangular Sub‐Microtubes Synthesized in Dilute Inorganic Acid Solution

Rectangular‐tube‐based fan‐like polyaniline has been readily fabricated by the oxidation polymerization of low‐concentration aniline in dilute HCl aqueous solution for the first time. Different from the conventional polymerization that proceeds in concentrated acidic solution (to produce nanofibers), this synthesis was conducted in dilute inorganic acid solution at room temperature and created polyaniline hierarchical fan‐like architectures. The morphological evolution of the product has been followed with respect to the reaction time, based on which conceivable interpretations of the formation of rectangular tubes and their assembly into fan‐like architectures are given. Other inorganic acids (HNO₃, H₂SO₄, and H₃PO₄) with low concentrations have been used to replace HCl in the reaction system to validate the adaptability of this approach in this report.

     

Polyaniline “Nanotube” Self‐Assembly: The Stage of Granular Agglomeration on Nanorod Templates

The identification and control of a critical stage of polyaniline “nanotube” self‐assembly is presented, namely the granular agglomeration or growth onto nanorod templates. When the synthesis pH is held above 2.5, smooth insulating nanorods exhibiting hydrogen bonding and containing phenazine structures are produced, while below pH 2.5, small 15–30 nm granular polyaniline nanoparticles appear to agglomerate onto the available nanorod surface, apparently improving conductivity of the resulting structures by three orders of magnitude. This finding affects both fundamental theories of polyaniline nanostructure self‐assembly and their practical applications.

     

Polyvinyl‐Locked versus Free Quaterthiophene: Effect of Spatial Constraints on the Electronic Properties of n‐Hexylquaterthiophene

A soluble, low‐weight fraction of poly(α‐vinyl,ω‐n‐hexyl‐quaterthiophene), PT4Hex, having n‐hexylquaterthiophenes as side‐chain groups, is prepared by free‐radical polymerization of α‐vinyl,ω‐n‐hexyl‐quaterthiophene and the corresponding properties compared to those of free di‐n‐hexylquaterthiophene (T4Hex). Optical analysis (absorption and emission) and X‐ray diffraction data indicate that in the polyvinyl‐locked architecture the quaterthiophene pendants adopt a cofacial arrangement with a mutual distance close enough for π–π orbitals to overlap (～4 Å). As a consequence of the close chain packing, a shift of the reduction potential of about 0.5 V toward less negative values with respect to free T4Hex, is found for PT4Hex films. Due to its enhanced electron affinity, PT4Hex displays an electron‐acceptor behavior when blended with alkylated and silylated quaterthiophenes acting as donors.     

Preparation of Nanostructured Polyaniline and its Super‐Amphiphilic Behavior

PANI nanofibers are prepared electrochemically by template‐free method on a stainless steel electrode. Both the hydrophilicity and the lipophilicity of the modified SS surface are enhanced by the nanostructured PANI, and a super‐amphiphilic surface is obtained in this way. The influence of polymerization conditions, such as polymerization potentials, polymerization time, the acidity, and the dopants on the super‐amphiphilic property, has been systematically investigated. In addition, the mechanisms of obtaining a super‐amphiphilic surface are briefly discussed.

     

Self‐Assembled Microspheres Driven by Dipole‐Dipole Interactions: UCST‐Type Transition in Water

A double hydrophilic block copolymer, poly(ethylene glycol)‐poly(3‐dimethyl (methacryloyloxyethyl) ammonium propane sulfonate) (PEG‐SB), is synthesized by reversible addition‐fragmentation transfer (RAFT) polymerization using PEG methyl ether (4‐cyano‐4‐pentanoate dodecyl trithiocarbonate) as a chain transfer agent. PEG‐SB forms multi‐layered microspheres with dipole‐dipole interactions of the SB side chains as the driving force. The PEG‐SB polymers show an upper critical solution temperature (UCST) and the UCST is controllable by the polymerization degree. The PEG‐SB microspheres are dissociated above the UCST and then monodispersed microspheres (∼1 μm) are obtained when the solution temperature is decreased below the UCST again. The disassociation/association of the microspheres is also controllable using the concentration of NaCl. These multi‐responsive microspheres could be a powerful tool in the field of nano‐biotechnology.

     

Fabrication of Stable Chiral Polyaniline Nanocomposite‐Based Patterns

Summary: We report an artful method to form a stable pattern of chiral polyaniline nanocomposites (CPANs). It consists of the preparation of a diazoresin (DR)/poly(acrylic acid) (PAA) thin buffer layer on an Si substrate by self‐assembly, followed by the deposition of a multi‐layer film by spin‐assembly, leading to the formation of a (DR/PAA)₂DR/(CPAN/DR)_n film on the substrate. After selective exposure to UV light through a photomask and the development process, a defined pattern is formed.

Scanning electron microscopy image of the patterned (CPAN/DR)₅ thin film on Si wafer.     

Redox‐Switchable Surface Wrinkling on Polyaniline Film

Here the redox‐driven switch between the wrinkled and dewrinkled states on poly­aniline (PANI) film is reported. This switch is derived from the reversible transition in different intrinsic redox states of polyaniline (e.g., between emeraldine salt (ES) and leucoemeraldine base (LEB) or between ES and pernigraniline base (PB)) that are involved in the redox reaction, coupled with the corresponding volume expansion/shrinkage. Interestingly, the as‐wrinkled ES film becomes deswollen and dewrinkled when reduced to the LEB state or oxidized to the PB state. Conversely, oxidation of the LEB film or reduction of the PB film into the swollen ES film leads to the reoccurrence of surface wrinkling. Furthermore, the reducibility of the dewrinkled LEB film and the oxidizability of the dewrinkled PB film are well utilized respectively to yield various wrinkled PANI‐based composite films.

     

Polyaniline Microtubes with a Hexagonal Cross‐Section and pH‐Sensitive Fluorescence Properties

Polyaniline (PANI) microtubes with a hexagonal cross‐section are successfully synthesized by a self‐assembly process in the presence of 8‐hydroxyquinoline‐5‐sulfonic acid (HQS) as a dopant and FeCl₃ as an oxidant. The wall thickness of the PANI/HQS microtubes can be adjusted by the content of the oxidant. It is proposed that the aniline/HQS salts serve as a hard template for the formation of the hexagonal‐cross‐section microtubes. Moreover, PANI/HQS microtubes combined with ZnSO₄ show pH‐dependent fluorescence. PANI hexagonal‐cross‐section microtubes combined with a pH‐sensitive fluorescence may promise potential applications in fields such as chemical sensors and confined reaction vessels.

     

Ordered Hybrids from Template‐Free Organosilane Self‐Assembly

Despite considerable achievements over the last two decades, nonporous organic–inorganic hybrid materials are mostly amorphous, especially in the absence of solvothermal processes. The organosilane self‐assembly approach is one of the few opportunities for creating a regular assembly of organic and inorganic moieties. Additionally, well‐established organosilicon chemistry enables the introduction of numerous organic functionalities. The synthesis of periodically ordered hybrids relies on mono‐, bis‐, or multisilylated organosilane building blocks self‐assembling into hybrid mesostructures or superstructures, subsequently cross‐linked by siloxane Si‐O‐Si condensation. The general synthesis procedure is template‐free and one‐step. However, three concurrent processes underlie the generation of self‐organized hybrid networks: thermodynamics of amphiphilic aggregation, dynamic self‐assembly, and kinetically controlled sol–gel chemistry. Hence, the set of experimental conditions and the precursor structure are of paramount importance in achieving long‐range order. Since the first developments in the mid‐1990s, the subject has seen considerable progress leading to many innovative advanced nanomaterials providing promising applications in membranes, pollutant remediation, catalysis, conductive coatings, and optoelectronics. This work reviews, comprehensively, the primary evolution of this expanding field of research.     

Conducting Polyaniline Confined in Semi‐Interpenetrating Networks

Conducting semi‐interpenetrating network composites with low conductivity percolation threshold were synthesized from waterborne conducting polyaniline (cPAn) and melamine‐urea resin. A perfect network of cPAn in the composite was observed by means of TEM (see Figure). The conductivity stability of cPAn in water was improved by confining the chain mobility of cPAn via in‐situ crosslinking of melamine‐urea resin. Cyclic voltammetry of the composites reveals electrochemical activities and reversibilities similarly to those of pure cPAn.     

Polyaniline copolymers with solvent‐mimic side chains

We investigated new polyaniline copolymers with solvent‐mimic side chains for enhanced processability in various solvents. The solvent‐mimic side chains, benzyloxypropoxy (BOP), phenoxybutoxy (POB), and dihydroxypropoxy (DHP), were introduced into copolymers and used with nonpolar aromatic and polar alcoholic solvents, respectively. Compared to a polyaniline homopolymer, polyaniline copolymers with a small amount of side chains (<4 mol %) exhibit different physical properties, including film‐forming ability. This can be attributed to the solvent‐mimic side chains strongly interacting with the solvent and/or the polyaniline backbone. Especially, in nonpolar aromatic solvents, polyaniline copolymers with nonpolar aromatic BOP and POB side chains exhibit good film‐forming ability leading to high electrical conductivity, while the polyaniline homopolymer did not form a film. Therefore, introducing solvent‐mimic side chains in conducting polymers is a very attractive method of enhancing their processability and physical properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1986–1995     

Fabrication of Microspheres from Phthalimide‐Substituted Porphyrin Derivatives

Microspheres were fabricated from phthalimide‐substituted porphyrin derivatives. Microscopic analysis showed that the structures of the supramolecular assemblies synthesized in the present study were spherical, with diameters in the sub‐micrometer to micrometer range. The size of the microspheres could be controlled by changing the concentration of the casting solution. The spectroscopic properties of the microspheres were measured to determine the influence of their structural components. Thermal studies indicated that the temperature at which these structures became unstable was lower than the bulk melting point. During I–V measurements on devices composed of these microspheres, it was found that the current increased upon light irradiation, and the characteristic photoresponse properties of these devices were reproducible.     

Self‐Assembly of Polyaniline/Au Composites: From Nanotubes to Nanofibers

Summary: Polyaniline (PANI)/Au composite nanotubes and nanofibers are synthesized through a self‐assembly process in the presence of camphorsulfonic acid and hydrochloric acid, as dopants, respectively. The PANI/Au composites are characterized by FT‐IR, UV‐vis, and thermogravimetric analysis to verify the incorporation of the Au nanoparticles and determine the Au content. Structural characterization is performed using SEM, TEM and X‐ray diffraction. The presence of the Au nanoparticles results in an increased conductivity and improved crystallinity of the PANI. The self‐assembly method employed here is a simple and inexpensive route to synthesize multifunctional nanotubes and nanofibers and could be extended to prepare other inorganic nanoparticle/PANI composites.

TEM image of PANI/Au nanotubes.