We present a computer study of the association behavior of copolymer chains with a gradient part and soluble tail of variable length. As a simulation method we use dynamic Monte Carlo simulation on a simple cubic lattice with pair interaction parameters. The solvent quality and selectivity is modeled by the variation of pair interaction parameters between nearest neighbors on the lattice. The role of the length of soluble part in the self‐assembly and its effect on the structure of aggregates was the main goal of this work. The size and structure of aggregates were analyzed using an improved topological classification method which has been developed and tested in the present study. The structure and association numbers of aggregates were compared with those of linear diblock copolymers.
Summary: A new strategy was developed to prepare disorderly exfoliated nanocomposites, in which a soft siloxane surfactant with a weight‐average molecular weight ( ) of 1 900 was adopted to modify the clay. The modified clay slurry was then mixed with silicone rubber by hand, and exfoliation was achieved. The proposed mechanism thereof was verified by TEM and XRD. The physical entanglement of the soft siloxane surfactant plays a vital role in the diffusion and intercalation of the matrix molecules during the compounding of the slurry‐polymer mixture. This simple method is applicable to other silicone‐based materials reinforced by clay.
TEM micrograph of silicone rubber/clay‐sil nanocomposite. 相似文献
During mix melting of hyperbranched AB2‐ and linear CD‐polycondensates distributive properties are changing by interchange reactions. Two mathematical modeling approaches are presented: (i) Simplified approach of monodisperse population of three‐arm stars undergoing interchange reactions, both analytical and by Monte Carlo simulations, assuming interchange as subsequent scission and recombination of fragments. (ii) Full system of interchange and polycondensation/hydrolysis reactions with Monte Carlo simulations and kinetic model describing reactions of free groups (A, B, C, D) and bonds (AB, CD, BC, AD). MC simulations show that the final molecular weight and branching distribution is attained after 10% of reaction time. The change of structure, from few large fragments to more, smaller ones, is slower.
The catalytic properties of bis(phenoxy‐imine) Zr and Hf complexes incorporating perfluorophenyl groups with methylaluminoxane were investigated. The fluorinated complexes produced far higher‐molecular‐weight polyethylenes and ethylene/propylene copolymers with increased activities compared with the non‐fluorinated congeners. Moreover, the fluorinated complexes displayed a higher incorporation ability for propylene.
Structured hybrid nanoparticles were synthesized via surface‐initiated atom transfer radical polymerization of MMA from ordered mesoporous silica (OMS) nanoparticles with various morphologies. The design of the OMS particles was adjusted to target either spherical core‐shell or cylindrical morphologies with a mean diameter below 400 nm. The polymer growth via ATRP from the silica surface was well‐controlled as demonstrated by the macromolecular characteristics of the grafted chains. Original hybrid multilayered nanoparticles composed of either a dense silica core or hollow core; an inner OMS shell showing radial orientation of the mesopores and an outer PMMA shell with controlled thickness were successfully prepared.
The free volume (voids) distribution in the lamellae of the conventional symmetric and amphiphilic diblock copolymers is studied via Monte–Carlo simulation based on the standard bond fluctuation model. Both in the conventional and amphiphilic block copolymers the voids are found to concentrate on the interfaces between the incompatible units, the magnitude of the effect being unexpectedly significant. A crystalline‐like ordering of voids with increase of the incompatibility between the different repeated units in amphiphilic copolymers is first reported and implications of this peculiarity for the morphology and mechanical properties of the amphiphilic copolymers are discussed.
Transparent film materials with excellent mechanical and thermal properties were elaborated by drying a latex suspension of armored polymer/Laponite composite particles. Low‐temperature TEM observation of ultrathin cross‐sections of the films indicated a unique network morphology characterized by a “honeycomb” distribution of the Laponite platelets remindful of the original particles morphology.
One‐dimensional methyl orange fibrils can be easily prepared. They are stable in acidic aqueous solutions and soluble in neutral water. When used to synthesize conducting polymer microtubules, the fibrils act as “hard templates” formally but as “soft templates” effectively. Microtubular structures of polypyrrole, polyaniline, and poly(3,4‐ethylenedioxythiophene) have been achieved successfully via such water‐soluble versatile templates.
Summary: Magnetic nanoparticles have been prepared by a co‐precipitation method and modified with methacryloxypropyltrimethoxysilane. Magnetic molecularly imprinted polymer particles have been prepared by suspension polymerization in silicone oil. The particles possess a high affinity to the template molecules and are rapidly separated under a magnetic field.
We have systematically studied the thin film morphologies of asymmetric polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) diblock copolymer subjected to solvent vapors of varying selectivity for the constituent blocks. Upon a short treatment in neutral or PS‐selective vapor, the film exhibited a highly ordered array of hexagonally packed, cylindrical microdomains. In the case of PEO selective vapor annealing, such ordered cylindrical microdomains were not obtained. Instead, fractal patterns on the microscale were observed and their growth processes investigated. Furthermore, hierarchical structures could be obtained if the fractal pattern was exposed to neutral or PS selective vapor.
The identification and control of a critical stage of polyaniline “nanotube” self‐assembly is presented, namely the granular agglomeration or growth onto nanorod templates. When the synthesis pH is held above 2.5, smooth insulating nanorods exhibiting hydrogen bonding and containing phenazine structures are produced, while below pH 2.5, small 15–30 nm granular polyaniline nanoparticles appear to agglomerate onto the available nanorod surface, apparently improving conductivity of the resulting structures by three orders of magnitude. This finding affects both fundamental theories of polyaniline nanostructure self‐assembly and their practical applications.
Summary: The addition of spermidine (SPD) into turbulent flow as a condensing agent showed the abrupt change of turbulent drag reducing (DR) efficiency of λ‐DNA in turbulent flow for the first time. The resultant asymptote DR efficiency explains the origin of those changes, which can be conclusively verified via the electrophoresis experiment. Despite the different fluid conditions, with and without condensing agent, all λ‐DNA molecules possessed the same half‐cut dimension, implying that the discrete change of DNA conformation can dramatically alter the flow characteristics.
Coil‐globule transition of DNA by spermidine. 相似文献
Future advances in designing bioactive materials, such as antithrombotic coatings for cardiovascular stents, will require widely applicable and robust methods of surface modification. In this paper, we report on the development of multifunctional polymer coatings made by chemical vapor deposition (CVD) copolymerization. Polymer coatings of various [2.2]paracyclophane derivatives were co‐deposited in controlled ratios and their chemical composition verified by FT‐IR and X‐ray photoelectron spectroscopy. Furthermore, preliminary biocompatibility of these coatings was assessed using human umbilical vein endothelial cells and 3T3 murine fibroblasts. The parallel immobilization of two different antithrombotic biomolecules onto a CVD‐based copolymer is also demonstrated by orthogonal immobilization strategies.
Summary: The fabrication of polymer diodes on a glass substrate by an ink‐jet printing technique is reported. Both an n‐type semiconductive polymer, poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐(1‐cyanovinylene)phenylene] (CN‐PPV), and a p‐type semiconductive polymer, polypyrrole (PPy) or poly(3,4‐ethylenedioxythiophene) (PEDOT), were printed through a piezoelectric ink‐jet printer. The printed CN‐PPV/PPy and CN‐PPV/PEDOT diodes showed good rectifying characteristics. These results indicate the potential of the low‐cost ink‐jet printing technique to produce polymer microelectronic devices and circuits.
Schematic diagram of the printed polymer diode 相似文献
We describe an enzyme‐responsive polymeric vehicle, which is of great interest in controlled drug delivery, biosensing, and other related areas. The polymer synthesized using lipase as catalyst in DMSO has a favorable molecular structure that is quickly hydrolyzed by lipase in aqueous phase, and allows a fast release of encapsulated molecules.
Rheological and solid‐state physical properties of blends containing high‐density polyethylene (HDPE) and a polyampholyte derivative (PE‐g‐PA) are assessed along with their onium ion‐exchanged montmorillonite clay (NR‐MM) nanocomposites. Strong deviations from the log‐additivity rule of zero‐shear viscosity, combined with synergistic behavior in tensile moduli, are consistent with a multi‐phase blend morphology. While this affects clay dispersion in filled blends, PE‐g‐PA/HDPE based nanocomposites are shown to exhibit a favorable balance between material stiffness and ductility.
Polymer‐encapsulated silver nanoparticles were synthesized and sterically stabilized by a new core‐shell type system consisting of poly(S‐alt‐MA)‐graft‐PMMA copolymer that acts as a scaffold for the synthesis of size confined nanoparticles. The graft copolymer is synthesized via ambient temperature ATRP using the CuBr/PMDETA catalytic system at ambient temperature. The graft copolymer is hypothesized to function as a scaffold with the anhydride part interacting strongly with the silver ions, while the PMMA graft functions as a polymer brush that stabilizes the dispersion and prevents the particle aggregation due to a ‘polymer brush effect’. UV absorption and TEM studies confirm that the synthesized silver composite particles have a core‐shell structure.
The intrinsic photoluminescence properties of hyperbranched polyethylenimines (PEIs) and their linear counterpart (LPEIs) have been studied in absence of any classical fluorescent probes. The comparison of the inherent fluorescence emission between hyperbranched polyethylenimines and their linear analogues demonstrates that linear polyamines are capable of producing strong intrinsic photoluminescence species having long excited lifetimes without need of having a tridimensional‐branched structure. The creation of inherently fluorescent polymeric centers from hyperbranched and linear polyethyleimines can be modulated by specific chemical modification and oxidation of amine groups as well as by adjusting the acidity of the polymer.
Summary: Tetraaniline‐block‐poly(L ‐lactide) diblock oligomers are synthesized via ring‐opening polymerization. The diblock oligomers cast from an L ‐lactide selective solvent (chloroform) show spherical aggregates for the leucoemeraldine state, and ring‐like structures that are composed of much smaller spherical aggregates for the emeraldine state. The formation mechanisms of the two different surface morphologies are discussed in detail.
Surface morphology changes induced by oxidation of the aniline segment of tetraaniline‐block‐poly(L ‐lactate) and drying effects. 相似文献
Summary: A methacrylate‐functionalized poly(ethylene glycol) macromonomer was copolymerized at the surface of methacrylate‐derivatized maghemite nanoparticles. After silylation of the magnetic core with methacryloxypropyltrimethoxysilane, two grafting procedures based on either a direct copolymerization reaction in water or an inverse emulsion polymerization were compared. A direct copolymerization led to low polymer surface amounts, whereas an inverse emulsion process allowed nanocomposite particles containing up to 90 wt.‐% polymer to be obtained.
TEM picture of maghemite‐PEG hybrid particles. 相似文献
