A generalized silica coating scheme is used to functionalize and protect sub‐micron and micron size dicyclopentadiene monomer‐filled capsules and polymer‐protected Grubbs' catalyst particles. These capsules and particles are used for self‐healing of microscale damage in an epoxy‐based polymer. The silica layer both protects the capsules and particles, and limits their aggregation when added to an epoxy matrix, enabling the capsules and particles to be dispersed at high concentrations with little loss of reactivity.
Spherical polyelectrolyte brushes consisting of a magnetite/polystyrene nanocomposite core and a poly(acrylic acid) brush shell were prepared by photo‐emulsion polymerization. They are narrowly dispersed, superparamagnetic and redispersible after aggregating by external magnetic field, as determined by transmission electron microscopy, dynamic light scattering, thermal gravimetric analysis and a vibrating sample magnetometer. Magnetic control is thus introduced into nano‐sized spherical polyelectrolyte brushes to achieve recovery and controllable delivery in applications. This approach opens up the way for cost‐effective applications of spherical polyelectrolyte brushes.
A dextran‐based dual‐sensitive polymer is employed to endow gold nanoparticles with stability and pH‐ and temperature‐sensitivity. The dual‐sensitive polymer is prepared by RAFT polymerization of N‐isopropylacrylamide from trithiocarbonate groups linked to dextran and succinoylation of dextran after polymerization. The functionalized nanoparticles show excellent stability under various conditions and can be stored in powder‐form. UV and DLS measurements confirm that the temperature‐induced optical changes and aggregation behaviors of the particles are strongly dependent on pH.
A two‐armed polymer with a crown ether core self‐assembles to produce macroporous films with pores perpendicularly reaching through the film down to the substrate. A possible assembling mechanism is discussed. The pore size can be conveniently adjusted by changing the solution concentration. These through‐hole macroporous films provide a template for fabricating an array of Cu nanoparticle aggregates.
4‐Vinylbenzoyl azide was synthesized from p‐vinylbenzoic acid and polymerized by free radical polymerization. The obtained polymer contained acyl azide groups which were thermally transformed to the corresponding isocyanato groups. Reactions on these polymers with ethanol, hydroxyethyl methacrylate and 1‐pyrenebutanol proceeded quantitatively. Time‐resolved FT‐IR studies of the reactions with ethanol were carried out by varying the concentration and temperature. The effect of the solvent polarity on the Curtius rearrangement was investigated.
Two new “H” type of indole‐based chromophores were designed and successfully introduced to the polymeric system, the resultant polymers demonstrated enhanced NLO effects, good processability, thermal stability and nearly excellent transparency, indicating the advantages of “H” type chromophore moieties. And they could be promising candidates for the practical applications as new photonic materials.
Blue‐light‐emitting 2,7‐carbazole‐based conjugated copolymers have been prepared by Yamamoto or Suzuki cross‐coupling reactions. By introducing highly substituted aromatic comonomers, fully soluble high‐molecular‐weight copolymers have been obtained. Moreover, these amorphous polymeric materials exhibit good thermal stability and interesting redox properties. All these features make these new conjugated polymers highly promising for the development of single‐polymer‐layer blue‐light‐emitting diodes.
We report here a facile synthesis of high performance electro‐active polymer actuator based on a sulfonated polyimide with well‐defined silver electrodes via self‐metallization. The proposed method greatly reduces fabrication time and cost, and obviates a cation exchange process required in the fabrication of ionic polymer‐metal composite actuators. Also, the self‐metallized silver electrodes exhibit outstanding metal‐polymer adhesion with high conductivity, resulting in substantially larger tip displacements compared with Nafion‐based actuators.
We report syntheses of phenylene‐, biphenylene‐, and terphenylene‐layered polymers with a xanthene scaffold by the modified Suzuki‐Miyaura coupling reaction. Their optical properties were studied in detail. The polymer end‐capped by nitrobenzene units, which act as fluorescence quenchers, exhibited the photo‐excited energy transfer from the layered oligophenylenes to the terminal units.
Summary: Polypyrrole nanotubes with high electric conductivity and azo function have been fabricated in high yield via an in‐situ polymerization. During the process fibrillar complex of FeCl3 and methyl orange (MO), acting as a reactive self‐degraded template, directed the growth of polypyrrole on its surface and promoted the assembly into hollow nanotubular structures.
TEM image of uncompleted PPy nanotubes synthesized in MO solutions after reaction for 40 min. 相似文献
Green nanocomposite coatings based on renewable plant oils have been developed. An acid‐catalyzed curing of epoxidized plant oils with 3‐glycidoxypropyltrimethoxysilane produced transparent nanocomposites. The hardness and mechanical strength improved by incorporating the silica network into the organic polymer matrix, and good flexibility was observed in the nanocomposite. The nanocomposites showed high biodegradability.
Summary: Laser‐induced fluorescence spectroscopy of the optical probe Nile Blue A in polymer clay nanocomposites is described. Concentration quenching of the fluorescence dominates the probe behavior until the clay platelets are physically separated by polymer intercalation. Further separation into an exfoliated structure results in an intense increase in probe fluorescence. Preliminary results indicate the ability to discriminate between intercalated and exfoliated structures in nanocomposites formed by melt processing.
Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.
Summary: Fabrication of honeycomb‐patterned films from amphiphilic dendronized block copolymer (PEO113‐b‐PDMA82) by ‘on‐solid surface spreading’ and ‘on‐water spreading’ method is reported. Highly ordered honeycomb films with quasi‐horizontally paralleled double‐layered structure can be fabricated by the on‐solid surface spreading method. This work raises the possibility that such structures can be formed in amphiphilic dendronized block copolymers and extends the family of source materials.
We report for the first time the preparation of single polypyrrole (PPy) molecule chains using a “metal‐organic framework” with 1 nm channels as a template. The obtained one‐dimensional (1‐D) PPy has highly structure order and excellent conductivity, which has improved by as much as five orders of magnitude in comparison with that of 2‐D PPy.
In contrast to the conventional two‐step method, which involves the generation of reactive functional groups followed by incubation in a dye solution (a wet developing process), the “precursor approach” enables the rapid and cost‐effective generation of patterned images in one step, without the need for an additional wet process. By using the “precursor approach”, the fluorescence of precursor molecules in polymer films can be effectively manipulated by: (1) photoinduced removal of transient protecting groups; (2) photoinduced protonation or intramolecular proton transfer; (3) photochromism; (4) photoinduced formation of fluorophores; (5) photoinduced oxidative degradation or molecular orientation.
Some new water‐soluble bis‐porphyrins, constituted of two porphyrin units spaced by means of aliphatic bridges of different lengths, were synthesized and characterized by MALDI‐TOF mass spectrometry, 1H NMR and UV‐vis spectroscopy. The hydrosolubility of these uncharged compounds was guaranteed from the presence of six long PEG chains bound on the peripheral positions of the two porphyrins. Cobalt and zinc derivatives were also prepared. In the case of Co‐bis‐porphyrin, the appearance of induced circular dichroism (ICD) signals in water solution confirmed the formation of stable complexes with some amino acids, in which the bis‐porphyrin behaves like molecular tweezers.
A trithiocarbonate RAFT agent was modified with a pyridyl disulfide group and used in the direct synthesis of endgroup pyridyl disulfide‐functionalized homo‐ and amphiphilic block copolymers of oligo(ethyleneglycol) acrylate (PEG‐A) and butyl acrylate (BA). Both the homo‐ and copolymerizations were found to be well controlled via the RAFT mechanism. The NMR analysis indicated that both the homopolymers of PEG‐A and the amphiphilic diblock copolymers of PEG‐A and BA possessed pyridyl disulfide terminal groups. A UV‐Vis absorption test revealed that the pyridyl disulfide endgroup of the polymer could be efficiently used to couple thiol‐bearing molecules to the polymer without the need for any post‐polymerization modification. This communication presents the first efficient direct synthesis of thiol‐reactive endgroup‐functionalized well‐defined polymers via the RAFT technique.
A new type of polymeric hybrid coating is created by layer‐by‐layer deposition of polyelectrolyte multilayers (PEM) onto nano‐patterned polymer brushes (NPB). The PEM is a hydrogen‐bonded multilayer consisting of poly(acrylic acid) and poly(acrylamide) and the NPB is derived from a surface reactive rod‐coil block copolymer, polystyrene‐block‐poly[3‐(triethoxysilyl)propylisocyanate]. The thickness of the PEM coating is optimized with respect to the height of the NPB mounds, to yield PEM/NPB hybrid coatings with unique nano‐embossed or nano‐porous structures that can be interchangeable by heating and moisture annealing. The hybrid coating is patternable by the micro‐contact printing method. The results demonstrate that the combination of surface‐bound, hydrophobic NPB layer with hydrophilic PEM films at the nanoscopic level offers a new organic hybrid coating with novel surface properties.
Macroporous temperature‐sensitive poly(N‐isopropylacrylamide) (PNIPA) hydrogels were prepared by a novel phase‐separation technique to improve the response properties. In comparison with a conventional PNIPA hydrogel prepared in water, these macroporous hydrogels, prepared by polymerization in aqueous sucrose solutions, have higher swelling ratios at temperatures below the lower critical solution temperature and exhibit much faster response rates to temperature changes.
Scanning electron microscopy image of the surface of a PNIPA hydrogel, prepared in 1.50 M aqueous sucrose solution. 相似文献
